Crucial Role of the Spacer in Tuning the Length of Self-Assembled Nanorods

Spontaneous Formation of Polymeric Nanoribbons in Water Driven by π-π Interactions

A simple method was developed to produce polymeric nanoribbons and other nanostructures in water. This approach incorporates a perylene diimide (PDI) functionalized by triethylene glycol (TEG) as a hydrophobic supramolecular structure directing unit (SSDU) into the core of hydrophilic poly(N,N-dimethylacrylamide) (PDMAc) chains using RAFT polymerization. All PDI-functional polymers dissolved spontaneously in water, forming different nanostructures depending on the degree of polymerization (DPn): nanoribbons and nanocylinders for DPn=14 and 22, and spheres for DPn>50 as determined by cryo-TEM and SAXS analyses. UV/Vis absorption spectroscopy was used to monitor the evolution of the PDI absorption signal upon dissolution. In solid form, all polymers show a H-aggregate absorption signature, but upon dissolution in water, the shortest DPn forming nanoribbons evolved to show HJ-aggregate absorption signals. Over time, the J-aggregate band increased in intensity, while cryo-TEM monitoring evidenced an increase in the nanoribbon's width. Heating the nanoribbons above 60 °C, triggered a morphological transition from nanoribbons to nanocylinders, due to the disappearance of J-aggregates, while H-aggregates were maintained. The study shows that the TEG-PDI is a powerful SSDU to promote 2D or 1D self-assembly of polymers depending on DPn through simple dissolution in water.

Photo-responsive supramolecular polymer bottle-brushes: The key role of the solvent on self-assembly and responsiveness

HYPOTHESIS

Supramolecular polymer bottlebrushes (SPBs) consist in the 1D self-assembly of building blocks composed of a self-assembling core with pendant polymer arms. Kinetic hurdles often hinder their stimuli-responsiveness in solution. Changing the nature of the solvent should alleviate these hurdles by modulating the self-association strength, leading to stimuli-responsive SPBs.

EXPERIMENTS

The SPBs were formed, in various solvents, by hydrogen bond-driven self-assembly of an azobenzene-bisurea decorated with poly(ethylene oxide) polymer arms. The photo-isomerization of the azobenzene unit was studied by UV/visible spectroscopy and proton NMR spectroscopy, whereas the consequences on supramolecular self-assembly were studied by small angle neutron and X-ray scattering.

FINDINGS

In water, the assembly was previously shown to be driven by both hydrogen-bonds and strong hydrophobic effects, the latter rendering the system kinetically frozen and the disassembly irreversible. Here we show that in organic solvents such as toluene or chloroform, reversible light-responsive dissociation is achieved. Solvophobic effects in these solvents are expected to be much weaker than in water, which probably allows reversibility of the light-response in the former solvents. The key role of the solvent on the reversibility of the process opens up new perspectives for the design of stimuli-responsive SPBs and their applications in various fields.

Influence of Polymer Side Chain Size and Backbone Length on the Self-Assembly of Supramolecular Polymer Bottlebrushes

Hydrogen bonds are a versatile tool for creating fibrous, bottlebrush-like assemblies of polymeric building blocks. However, a delicate balance of forces exists between the steric repulsion of the polymer chains and these directed supramolecular forces. In this work we have systematically investigated the influence of structural parameters of the attached polymers on the assembly behaviour of benzene trisurea (BTU) and benzene tris(phenylalanine) (BTP) conjugates in water. Polymers with increasing main chain lengths and different side chain sizes were prepared by reversible addition-fragmentation chain-transfer (RAFT) polymerization of hydroxyethyl acrylate (HEA), tri(ethylene glycol) methyl ether acrylate (TEGA) and oligo(ethylene glycol) methyl ether acrylate (OEGA). The resulting structures were analyzed using small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). Both BTU and BTP formed fibres with PHEA attached, but a transition to spherical morphologies was observed at degrees of polymerisation (DP) of 70 and above. Overall, the main chain length appeared to be a dominating factor in inducing morphology transitions. Increasing the side chain size generally had a similar effect but mainly impeded any aggregation as is the case of POEGA. Interestingly, BTP conjugates still formed fibres, suggesting that the stronger intermolecular interactions can compensate partially for the steric repulsion.

Anti-cooperative Self-Assembly with Maintained Emission Regulated by Conformational and Steric Effects

Herein, we present a strategy to enable a maintained emissive behavior in the self-assembled state by enforcing an anti-cooperative self-assembly involving weak intermolecular dye interactions. To achieve this goal, we designed a conformationally flexible monomer unit 1 with a central 1,3-substituted (diphenyl)urea hydrogen bonding synthon that is tethered to two BODIPY dyes featuring sterically bulky trialkoxybenzene substituents at the meso-position. The competition between attractive forces (H-bonding and aromatic interactions) and destabilizing effects (steric and competing conformational effects) limits the assembly, halting the supramolecular growth at the stage of small oligomers. Given the presence of weak dye-dye interactions, the emission properties of molecularly dissolved 1 are negligibly affected upon aggregation. Our findings contribute to broadening the scope of emissive supramolecular assemblies and controlled supramolecular polymerization.

Overcoming the Necessity of a Lateral Aggregation in the Formation of Supramolecular Polymer Bottlebrushes in Water

The assembly of supramolecular polymer bottlebrushes in aqueous systems is, in most cases, associated with a lateral aggregation of the supramolecular building blocks in addition to their axial stacking. Here, it is demonstrated that this limitation can be overcome by attaching three polymer chains to a central supramolecular unit that possesses a sufficiently high number of hydrogen bonding units to compensate for the increased steric strain. Therefore, a 1,3,5-benzenetrisurea-polyethylene oxide conjugate is modified with different peptide units located next to the urea groups which should facilitate self-assembly in water. For a single amino acid per arm, spherical micelles are obtained for all three tested amino acids (alanine, leucine, and phenylalanine) featuring different hydrophobicities. Only a slight increase in size and solution stability of spherical micelles is observed with increasing hydrophobicity of amino acid unit. In contrast, introducing two amino acid units per arm and thus increasing the number of hydrogen bonds per unimer molecule results in the formation of cylindrical structures, that is, supramolecular polymer bottlebrushes, despite a suppressed lateral aggregation. Consequently, it can be concluded that the number of hydrogen bonds has a more profound impact on the resulting solution morphology than the hydrophobicity of the amino acid unit.

Supramolecular polymer bottlebrushes

The field of supramolecular chemistry has long been known to generate complex materials of different sizes and shapes via the self-assembly of single or multiple low molar mass building blocks. Matching the complexity found in natural assemblies, however, remains a long-term challenge considering its precision in organizing large macromolecules into well-defined nanostructures. Nevertheless, the increasing understanding of supramolecular chemistry has paved the way to several attempts in arranging synthetic macromolecules into larger ordered structures based on non-covalent forces. This review is a first attempt to summarize the developments in this field, which focus mainly on the formation of one-dimensional, linear, cylindrical aggregates in solution with pendant polymer chains - therefore coined supramolecular polymer bottlebrushes in accordance with their covalent equivalents. Distinguishing by the different supramolecular driving forces, we first describe systems based on π-π interactions, which comprise, among others, the well-known perylene motif, but also the early attempts using cyclophanes. However, the majority of reported supramolecular polymer bottlebrushes are formed by hydrogen bonds as they can for example be found in linear and cyclic peptides, as well as so called sticker molecules containing multiple urea groups. Besides this overview on the reported motifs and their impact on the resulting morphology of the polymer nanostructures, we finally highlight the potential benefits of such non-covalent interactions and refer to promising future directions of this still mostly unrecognized field of supramolecular research.