In Vitro Sensitivity Analysis of the Gastrointestinal Dissolution Profile of Weakly Basic Drugs in the Stomach-to-Intestine Fluid Changing System: Explanation for Variable Plasma Exposure after Oral Administration

Designing an effective dissolution test for bilayer tablets tailored for optimal melatonin release in sleep disorder management

This project aims to investigate the release performance of bilayer tablet (BL-Tablet) designed with both fast and slow-release technology, targeting sleep disorders. The tablet incorporates Melatonin, extracts of Eschscholzia californica and Melissa officinalis. In order to validate the effectiveness of the extended-release profile, an advanced dissolution test was herein proposed. This new method utilizes biorelevant intestinal fluid media and incorporates a stomach-to-intestine fluid changing (SIFC) system. To demonstrate the advantages of employing this method for assessing the controlled release profile of active ingredients, the dissolution results were compared with those obtained using the conventional EU Pharmacopoeia approach. Furthermore, the comparative analysis was extended to include a monolayer tablet version (ML-Tablet) lacking the slow-release technology. Technological characterization and bioaccessibility studies, including intestinal permeability test, were conducted as well to assess the pharmacological performance and bioavailability of active ingredients. The dissolution data recovered revealed that the two dissolution methods did not exhibit any significant differences in the release of ML-Tablet's. However, the dissolution profile of the BL-Tablet exhibited notable differences between the two methods particularly when assessing the behavior of the slow-release layer. In this scenario, both methods initially exhibited a similar release pattern within the first approximately 0.5 h, driven by the fast-release layer of the tablet. Following this, distinct gradual and sustained releases were observed, spanning 2.5 h for the EU Pharmacopoeia method and 8 h for the new SIFC-biorelevant dissolution method, respectively. Overall, the novel method demonstrated a substantial improvement compared to conventional EU Pharmacopoeia test in evaluating the performance of a controlled slow-release technology. Remarkably, the prolonged release technology did not have an adverse impact on melatonin intestinal absorption, and, consequently, maintaining its potential bioavailability of around 78%. Concluding, this research provides valuable insights into how the innovative dissolution test can assist formulators in developing controlled release formulations.

The Effects of Degree and Duration of Supersaturation on In Vivo Absorption Profiles for Highly Permeable Drugs, Dipyridamole and Ketoconazole

The prediction of oral absorption from a supersaturating drug delivery system (SDDS) remains a significant challenge. Here we evaluated the effects of the degree and duration of supersaturation on in vivoabsorption for dipyridamole and ketoconazole. Various dose concentrations of supersaturated suspensions were prepared by a pH shift method, and in vitro dissolution and in vivo absorption profiles were determined. For dipyridamole, the duration of supersaturation decreased with the increase of the dose concentration owing to rapid precipitation. For ketoconazole, the initially constant dissolved concentrations due probably to the liquid-liquid phase separation (LLPS) as a reservoir were observed at high dose concentrations. However, the LLPS did not delay the peak plasma concentration of ketoconazole in rats, indicating that drug molecules were immediately released from the oil phase to the bulk aqueous phase. For both model drugs, the degree of supersaturation, but not the duration of supersaturation, correlated with systemic exposure, indicating quick drug absorption before precipitation. Therefore, the degree of supersaturation is an important parameter compared with the duration of supersaturation for enhancing the in vivo absorption of highly permeable drugs. These findings would help develop a promising SDDS.

Effects of cavitation-jet technology combined with enzyme treatment on the structure properties and functional properties of OKARA insoluble dietary fiber

In this study, a new composite modification method utilizing a cavitation jet combined with a composite enzyme (cellulase and xylanase) was developed to modify the insoluble dietary fibre (IDF) of okara (IDF was first treated with the cavitation jet at 0.3 MPa for 10 min, and then 6% of the enzyme was added, the composite enzyme with a 1:1 enzyme activity was hydrolysed for 1.5 h to obtain the modified IDF), and explored the structure-activity relationship between the structural properties, physicochemical properties and biological activities of IDF before and after modification. Under the action of cavitation jet and double enzyme hydrolysis, the modified IDF had a wrinkled and loose porous structure, which improved the thermal stability. Its water holding capacity (10.81 ± 0.17 g/g), oil holding capacity (4.83 ± 0.03 g/g) and swelling capacity (18.60 ± 0.60 mL/g) were significantly higher than those of unmodified IDF. In addition, compared with other IDFs, the combined modified IDF had greater advantages in nitrite adsorption (13.75 ± 0.14 μg/g), glucose adsorption (6.46 ± 0.28 mmol/g) and cholesterol adsorption (16.86 ± 0.83 mg/g), and improved in vitro probiotic activity and in vitro anti-digestion rate. The results show that the cavitation jet combined with compound enzyme modification method can effectively improve the economic value of okara.

Harmonizing Biopredictive Methodologies Through the Product Quality Research Institute (PQRI) Part I: Biopredictive Dissolution of Ibuprofen and Dipyridamole Tablets

Assessing in vivo performance to inform formulation selection and development decisions is an important aspect of drug development. Biopredictive dissolution methodologies for oral dosage forms have been developed to understand in vivo performance, assist in formulation development/optimization, and forecast the outcome of bioequivalence studies by combining them with simulation tools to predict plasma profiles in humans. However, unlike compendial dissolution methodologies, the various biopredictive methodologies have not yet been harmonized or standardized. This manuscript presents the initial phases of an effort to develop best practices and move toward standardization of the biopredictive methodologies through the Product Quality Research Institute (PQRI, https://pqri.org ) entitled "The standardization of in vitro predictive dissolution methodologies and in silico bioequivalence study Working Group." This Working Group (WG) is comprised of participants from 10 pharmaceutical companies and academic institutes. The project will be accomplished in a total of five phases including assessing the performance of dissolution protocols designed by the individual WG members, and then building "best practice" protocols based on the initial dissolution profiles. After refining the "best practice" protocols to produce equivalent dissolution profiles, those will be combined with physiologically based biopharmaceutics models (PBBM) to predict plasma profiles. In this manuscript, the first two of the five phases are reported, namely generating biopredictive dissolution profiles for ibuprofen and dipyridamole and using those dissolution profiles with PBBM to match the clinical plasma profiles. Key experimental parameters are identified, and this knowledge will be applied to build the "best practice" protocol in the next phase.

Biorelevant Dissolution Method Considerations for the Appropriate Evaluation of Amorphous Solid Dispersions: are Two Stages Necessary?

Biorelevant dissolution testing has been widely used to better understand a drug or formulation's behavior in the human gastrointestinal (GI) tract. The successful evaluation of biorelevant dissolution behavior requires recognizing the importance of utilizing suitable biorelevant media in conjunction with an appropriate dissolution method, especially for supersaturating drug delivery systems, such as amorphous solid dispersions (ASDs). However, most conventional biorelevant dissolution testing methods are not able to accurately reflect the dissolution, supersaturation, and precipitation tendencies of a drug or formulation, which could misinform ASD formulation screening and optimization. In this study, we developed a single compartment 2-stage pH-shift dissolution testing method to simulate the changes in pH, media composition, and transit time in the GI tract, and results were compared against the conventional single compartment 1-stage dissolution method. Nine model drugs were selected based on their ionization properties (i.e. acid, base or neutral) and precipitation tendency (i.e. moderate or slow crystallizer). The dissolution results confirmed that 2-stage pH-shift dissolution is the preferred biorelevant dissolution method to assess non-ionized weak base (nifedipine) and neutral (griseofulvin) compounds exhibiting a moderate precipitation rate from solution when formulated as ASDs. Finally, we designed a flowchart guidance for the appropriate biorelevant dissolution performance characterization of different categories of ASD formulations.

Supersaturation and Precipitation Applicated in Drug Delivery Systems: Development Strategies and Evaluation Approaches

Supersaturation is a promising strategy to improve gastrointestinal absorption of poorly water-soluble drugs. Supersaturation is a metastable state and therefore dissolved drugs often quickly precipitate again. Precipitation inhibitors can prolong the metastable state. Supersaturating drug delivery systems (SDDS) are commonly formulated with precipitation inhibitors, hence the supersaturation is effectively prolonged for absorption, leading to improved bioavailability. This review summarizes the theory of and systemic insight into supersaturation, with the emphasis on biopharmaceutical aspects. Supersaturation research has developed from the generation of supersaturation (pH-shift, prodrug and SDDS) and the inhibition of precipitation (the mechanism of precipitation, the character of precipitation inhibitors and screening precipitation inhibitors). Then, the evaluation approaches to SDDS are discussed, including in vitro, in vivo and in silico studies and in vitro-in vivo correlations. In vitro aspects involve biorelevant medium, biomimetic apparatus and characterization instruments; in vivo aspects involve oral absorption, intestinal perfusion and intestinal content aspiration and in silico aspects involve molecular dynamics simulation and pharmacokinetic simulation. More physiological data of in vitro studies should be taken into account to simulate the in vivo environment. The supersaturation theory should be further completed, especially with regard to physiological conditions.

Concentration and composition dependent aggregation of Pluronic- and Poly-(2-oxazolin)-Efavirenz formulations in biorelevant media

Many drugs and drug candidates are poorly water-soluble. Intestinal fluids play an important role in their solubilization. However, the interactions of intestinal fluids with polymer excipients, drugs and their formulations are not fully understood. Here, diffusion ordered spectroscopy (DOSY) and nuclear Overhauser effect spectroscopy (NOESY), complemented by cryo-TEM were employed to address this. Efavirenz (EFV) as model drug, the triblock copolymers Pluronic® F-127 (PF127) and poly(2-oxazoline) based pMeOx-b-pPrOzi-b-pMeOx (pOx/pOzi) and their respective formulations were studied in simulated fed-state intestinal fluid (FeSSIF). For the individual polymers, the bile interfering nature of PF127 was confirmed and pure pOx/pOzi was newly classified as non-interfering. A different and more complex behaviour was however observed if EFV was involved. PF127/EFV formulations in FeSSIF showed concentration dependent aggregation with separate colloids at low formulation concentrations, a merging of individual particles at the solubility limit of EFV in FeSSIF and joint aggregates above this concentration. In the case of pOx/pOzi/EFV formulations, coincident diffusion coefficients for pOx/pOzi, lipids and EFV indicate joint aggregates across the studied concentration range. This demonstrates that separate evaluation of polymers and drugs in biorelevant media is not sufficient and their mixtures need to be studied to learn about concentration and composition dependent behaviour.

Bioequivalence of Oral Drug Products in the Healthy and Special Populations: Assessment and Prediction Using a Newly Developed In Vitro System "BE Checker"

In order to assess and predict the bioequivalence (BE) of oral drug products, a new in vitro system "BE checker" was developed, which reproduced the environmental changes in the gastrointestinal (GI) tract by changing the pH, composition, and volume of the medium in a single chamber. The dissolution and membrane permeation profiles of drugs from marketed products were observed in the BE checker under various conditions reflecting the inter-patient variations of the GI physiology. As variable factors, initial gastric pH, gastric emptying time, and GI agitation strength were varied in vitro. Dipyridamole, a basic drug, showed rapid and supersaturated dissolution when the paddle speed in the donor chamber was 200 rpm, which corresponds to the high agitation strength in the stomach. In contrast, supersaturated dissolution disappeared, and the permeated amount decreased under the conditions with a slow paddle speed (100 and 50 rpm) and short gastric emptying time (10 min). In those conditions, disintegration of the formulation was delayed, and the subsequent dissolution of dipyridamole was not completed before the fluid pH was changed to neutral. Similar results were obtained when the initial gastric pH was increased to 3.0, 5.0, and 6.5. To investigate that those factors also affect the BE of oral drug products, dissolution and permeation of naftopidil from its ordinary and orally disintegrating (OD) tablets were observed in the BE checker. Both products showed the similar dissolution profiles when the paddle speed and gastric emptying time were set to 100 rpm and 10 or 20 min, respectively. However, at a low paddle speed (50 rpm), the dissolution of naftopidil from ordinary tablets was slower than that from the OD tablets, and the permeation profiles became dissimilar. These results indicated the possibility of the bioinequivalence of some oral formulations in special patients whose GI physiologies are different from those in the healthy subjects. The BE checker can be a highly capable in vitro tool to assess the BE of oral drug products in various populations.