3D-Printed Integrated Ultrasonic Microneedle Array for Rapid Transdermal Drug Delivery

Incorporation of Finasteride-Loaded Microspheres into Personalized Microneedle for Sustained Transdermal Delivery

Although finasteride (FNS) tablets are considered the most effective drug for the treatment of androgenetic alopecia (AGA), their clinical applications are limited due to the associated side effects including decreased libido, breast enlargement, and liver dysfunction. In this study, we have developed a personalized microneedle (PMN) with a double-layer structure that incorporates FNS-loaded microspheres (MPs) to accommodate irregular skin surfaces. This design enables the sustained release of FNS, thereby reducing potential side effects. The needle body was synthesized with high-strength hyaluronic acid (HA) as the base material substrate. The backing layer utilized methacrylate gelatin (GelMA) with specific toughness, enabling PMN to penetrate the skin while adapting to various skin environments. The length of PMN needles (10 × 10) was approximately 600 μm, with the bottom of the needles measuring about 330 μm × 330 μm. The distance between adjacent tips was around 600 μm, allowing the drug to penetrate the stratum corneum of the skin. The results of the drug release investigation indicated the sustained and regulated release of FNS from PMN, as compared to that of pure FNS and FNS-MPs. Further, the cytotoxicity assay demonstrates that PMS displays good cytocompatibility. Altogether, this mode of administration has immense potential for the development of delivery of other drugs, as well as in the medical field.

Fabrication and mechanical modelling of dissolvable PVA/PVP composite microneedles with biocompatibility for efficient transdermal delivery of ibuprofen

Microneedles offer minimally invasive, user-friendly, and subcutaneously accessible transdermal drug delivery and have been widely investigated as an effective transdermal delivery system. Ibuprofen is a common anti-inflammatory drug to treat chronic inflammation. It is crucial to develop microneedle patches capable of efficiently delivering ibuprofen through the skin for the effective treatment of arthritis patients requiring repeated medication. In this study, the mechanical properties of a new type of polymer microneedle were studied by finite element analysis, and the experimental results showed that the microneedle could effectively deliver drugs through the skin. In addition, a high ibuprofen-loaded microneedle patch was successfully prepared by micromolding and subjected to evaluation of its infrared spectrum morphology and dissolve degree. The morphology of microneedles was characterized by scanning electron microscopy, and the mechanical properties were assessed using a built linear stretching system. In the in-vitro diffusion cell drug release test, the microneedle released 85.2 ± 1.52% (210 ± 3.7 μg) ibuprofen in the modified Franz diffusion within 4 h, exhibiting a higher drug release compared to other drug delivery methods. This study provides a portable, safe and efficient treatment approach for arthritis patients requiring daily repeated medication.

Microneedle Patches-Integrated Transdermal Bioelectronics for Minimally Invasive Disease Theranostics

Wearable epidermal electronics with non- or minimally-invasive characteristics can collect, transduce, communicate, and interact with accessible physicochemical health indicators on the skin. However, due to the stratum corneum layer, rich information about body health is buried under the skin stratum corneum layer, for example, in the skin interstitial fluid. Microneedle patches are typically designed with arrays of special microsized needles of length within 1000 µm. Such characteristics potentially enable the access and sample of biomolecules under the skin or give therapeutical treatment painlessly and transdermally. Integrating microneedle patches with various electronics allows highly efficient transdermal bioelectronics, showing their great promise for biomedical and healthcare applications. This comprehensive review summarizes and highlights the recent progress on integrated transdermal bioelectronics based on microneedle patches. The design criteria and state-of-the-art fabrication techniques for such devices are initially discussed. Next, devices with different functions, including but not limited to health monitoring, drug delivery, and therapeutical treatment, are highlighted in detail. Finally, key issues associated with current technologies and future opportunities are elaborated to sort out the state of recent research, point out potential bottlenecks, and provide future research directions.

Design and fabrication of customizable microneedles enabled by 3D printing for biomedical applications

Microneedles (MNs) is an emerging technology that employs needles ranging from 10 to 1000 μm in height, as a minimally invasive technique for various procedures such as therapeutics, disease monitoring and diagnostics. The commonly used method of fabrication, micromolding, has the advantage of scalability, however, micromolding is unable to achieve rapid customizability in dimensions, geometries and architectures, which are the pivotal factors determining the functionality and efficacy of the MNs. 3D printing offers a promising alternative by enabling MN fabrication with high dimensional accuracy required for precise applications, leading to improved performance. Furthermore, enabled by its customizability and one-step process, there is propitious potential for growth for 3D-printed MNs especially in the field of personalized and on-demand medical devices. This review provides an overview of considerations for the key parameters in designing MNs, an introduction on the various 3D-printing techniques for fabricating this new generation of MNs, as well as highlighting the advancements in biomedical applications facilitated by 3D-printed MNs. Lastly, we offer some insights into the future prospects of 3D-printed MNs, specifically its progress towards translation and entry into market.

GEOMETRIC DETERMINANTS OF CELL VIABILITY FOR 3D-PRINTED HOLLOW MICRONEEDLE ARRAY-MEDIATED DELIVERY

A wide range of emerging biomedical applications and clinical interventions rely on the ability to deliver living cells via hollow, high-aspect-ratio microneedles. Recently, microneedle arrays (MNA) have gained increasing interest due to inherent benefits for drug delivery; however, studies exploring the potential to harness such advantages for cell delivery have been impeded due to the difficulties in manufacturing high-aspect-ratio MNAs suitable for delivering mammalian cells. To bypass these challenges, here we leverage and extend our previously reported hybrid additive manufacturing (or "three-dimensional (3D) printing) strategy-i.e., the combined the "Vat Photopolymerization (VPP)" technique, "Liquid Crystal Display (LCD)" 3D printing with "Two-Photon Direct Laser Writing (DLW)"-to 3D print hollow MNAs that are suitable for cell delivery investigations. Specifically, we 3D printed four sets of 650 μm-tall MNAs corresponding to needle-specific inner diameters (IDs) of 25 μm, 50 μm, 75 μm, and 100 μm, and then examined the effects of these MNAs on the post-delivery viability of both dendritic cells (DCs) and HEK293 cells. Experimental results revealed that the 25 μm-ID case led to a statistically significant reduction in post-MNA-delivery cell viability for both cell types; however, MNAs with needle-specific IDs ≥ 50 μm were statistically indistinguishable from one another as well as conventional 32G single needles, thereby providing an important benchmark for MNA-mediated cell delivery.

Ultrasound-activatable and skin-associated minimally invasive microdevices for smart drug delivery and diagnosis

Ultrasound-activatable and skin-associated minimally invasive microdevices (USMIMs) have garnered significant attention in the domains of smart drug delivery and biomedical diagnosis for on-demand healthcare, owing to their outstanding wearability, flexibility, and comfort. In this review, we present a comprehensive overview of the noteworthy advancements in USMIMs, with a specific focus on device design, potential applications, challenges, and future prospects. The classification of such microdevices primarily encompasses biointerfacing microsystems, including skin-perforable US-assisted microneedles (MNs), skin-attachable sonophoresis and their combination with microbubbles, as well as non-biointerfacing microsystems for drug delivery. Additionally, US-mediated and skin-attached microtransducers utilized in biomedical diagnosis are classified into imaging-related microtransducers, diagramming detection devices, and their combinative systems with applications on diverse signal detection. Besides, the review also highlights the challenges associated with USMIMs, focusing on aspects such as safety, environmental tolerance, wearability/comfortability, and personalization. Furthermore, it offers insights into future perspectives that address these challenges and discuss potential advancements in the field. It is firmly believed that the proposed USMIMs possess immense potential to significantly improve human lives in the near future.

Microneedle-Mediated Transcutaneous Immunization: Potential in Nucleic Acid Vaccination

Efforts aimed at exploring economical and efficient vaccination have taken center stage to combat frequent epidemics worldwide. Various vaccines have been developed for infectious diseases, among which nucleic acid vaccines have attracted much attention from researchers due to their design flexibility and wide application. However, the lack of an efficient delivery system considerably limits the clinical translation of nucleic acid vaccines. As mass vaccinations via syringes are limited by low patient compliance and high costs, microneedles (MNs), which can achieve painless, cost-effective, and efficient drug delivery, can provide an ideal vaccination strategy. The MNs can break through the stratum corneum barrier in the skin and deliver vaccines to the immune cell-rich epidermis and dermis. In addition, the feasibility of MN-mediated vaccination is demonstrated in both preclinical and clinical studies and has tremendous potential for the delivery of nucleic acid vaccines. In this work, the current status of research on MN vaccines is reviewed. Moreover, the improvements of MN-mediated nucleic acid vaccination are summarized and the challenges of its clinical translation in the future are discussed.

Non-invasive evaluation of transdermal drug delivery using 3-D transient triplet differential (TTD) photoacoustic imaging

Transdermal drug delivery (TDD) is less invasive and avoids first-pass metabolism, making it an attractive method for treating various diseases such as diabetes and hypertension. However, current methods for evaluating TDD systems lack in vivo descriptions of drug distribution in the skin. In this study, we demonstrate the capability of the Transient Triplet Differential (TTD) method, a non-invasive and background-free photoacoustic imaging technique, for accurately mapping drug distribution and evaluating different TDD systems. Our findings show that the TTD method can provide high sensitivity and specificity for targeted drug extraction and visualize 3D drug distribution in the skin. Furthermore, in vivo experiments confirmed the potential of the TTD method in evaluating the clinical performance of TDD. It's predictable that the TTD method can be a reliable and non-invasive approach for evaluating TDD systems and offer valuable insights into TDD research and development.

3D-Printed Microinjection Needle Arrays via a Hybrid DLP-Direct Laser Writing Strategy

Microinjection protocols are ubiquitous throughout biomedical fields, with hollow microneedle arrays (MNAs) offering distinctive benefits in both research and clinical settings. Unfortunately, manufacturing-associated barriers remain a critical impediment to emerging applications that demand high-density arrays of hollow, high-aspect-ratio microneedles. To address such challenges, here, a hybrid additive manufacturing approach that combines digital light processing (DLP) 3D printing with "ex situ direct laser writing (esDLW)" is presented to enable new classes of MNAs for fluidic microinjections. Experimental results for esDLW-based 3D printing of arrays of high-aspect-ratio microneedles-with 30 μm inner diameters, 50 μm outer diameters, and 550 μm heights, and arrayed with 100 μm needle-to-needle spacing-directly onto DLP-printed capillaries reveal uncompromised fluidic integrity at the MNA-capillary interface during microfluidic cyclic burst-pressure testing for input pressures in excess of 250 kPa (n = 100 cycles). Ex vivo experiments perform using excised mouse brains reveal that the MNAs not only physically withstand penetration into and retraction from brain tissue but also yield effective and distributed microinjection of surrogate fluids and nanoparticle suspensions directly into the brains. In combination, the results suggest that the presented strategy for fabricating high-aspect-ratio, high-density, hollow MNAs could hold unique promise for biomedical microinjection applications.

Microneedle-Mediated Transdermal Delivery of Biopharmaceuticals

Transdermal delivery provides numerous benefits over conventional routes of administration. However, this strategy is generally limited to a few molecules with specific physicochemical properties (low molecular weight, high potency, and moderate lipophilicity) due to the barrier function of the stratum corneum layer. Researchers have developed several physical enhancement techniques to expand the applications of the transdermal field; among these, microneedle technology has recently emerged as a promising platform to deliver therapeutic agents of any size into and across the skin. Typically, hydrophilic biomolecules cannot penetrate the skin by passive diffusion. Microneedle insertion disrupts skin integrity and compromises its protective function, thus creating pathways (microchannels) for enhanced permeation of macromolecules. Microneedles not only improve stability but also enhance skin delivery of various biomolecules. Academic institutions and industrial companies have invested substantial resources in the development of microneedle systems for biopharmaceutical delivery. This review article summarizes the most recent research to provide a comprehensive discussion about microneedle-mediated delivery of macromolecules, covering various topics from the introduction of the skin, transdermal delivery, microneedles, and biopharmaceuticals (current status, conventional administration, and stability issues), to different microneedle types, clinical trials, safety and acceptability of microneedles, manufacturing and regulatory issues, and the future of microneedle technology.