Nanoscale Mechanism of Moisture-Induced Swelling in Wood Microfibril Bundles

Uniform elementary fibrils in diverse plant cell walls

Plant cell walls are composed of skeletal cellulose and a filling matrix of hemicelluloses and lignin. Cellulose has slender crystallite units referred to as microfibrils or elementary fibrils, and these crystallites form a dense network skeleton in the cell walls. In this study, we assessed the morphology and crystallinity of individually dispersed microfibrils isolated from the cell walls of wood, cotton, and ramie celluloses. It is well known that microfibrils in higher plants exhibit structural diversity, and these three plants, in particular, have distinct differences in the morphology and crystallinity of microfibrils. Our structural analyses combining atomic force microscopy (AFM), wide-angle X-ray diffraction (WAXD), small-angle X-ray scattering (SAXS), solid-state 13C NMR spectroscopy, and all-atom molecular dynamics (MD) simulations revealed the uniformity in the cross-sectional dimensions and crystallinity of the dispersed microfibrils, irrespective of the plant species. The majority of the microfibrils were dispersed as structural units with widths of approximately 2 to 3 nm, and their crystallite sizes and crystallinity degrees were approximately 2 nm and 20%, respectively. These structural profiles were in agreement with the simulation results; here, the model assumed that a single microfibril consisted of 18 cellulose molecules. These results from the direct dimensional assessments support a recent hypothesis in biophysics that a single biosynthesis system of cellulose, referred to as the terminal complex (TC), consisted of 18 synthases. Some of the dispersed microfibrils had bundled sizes of two or three microfibrils. We also demonstrated that this bundling was stabilized by the fusion of several crystallites.

Effect of delignification on shrinking and swelling of poplar wood assessed using digital image correlation technique

This study investigates lignin's influence on the hygroscopic behavior of poplar wood. Delignification was achieved using an acidic NaClO2 solution, and digital image correlation (DIC) was employed to measure strain distribution during shrinking and swelling across relative humidity (RH) ranging of 0 % to 97 %. Results showed that lignin removal increased equilibrium moisture content (EMC) by up to 3.6 % in samples with 27 % lignin reduction. Strain analysis revealed significant radial strain differences between earlywood and latewood, with tangential strain suppressed by wood rays. Increased porosity and cellulose slippage were observed following lignin removal, and samples with the highest lignin removal rate exhibited reduction exhibited over 58 % greater εxx and over 43 % greater εyy compared to untreated wood. These effects were most pronounced in latewood and regions distant from wood rays, where stress concentrations occurred. Delignification-induced cell wall thinning amplified the wood rays' inhibitory effect on anisotropic deformation during shrinking，enhancing the contrast between isotropic deformation in latewood and anisotropic deformation in earlywood during swelling. These findings provide insights into lignin's role in wood-water interactions, supporting the optimization of wood modification techniques.

Multiscale dynamics and molecular mobility in cellulose-rich materials

Cellulose, an abundant biopolymer in nature as a structural component of plant cell walls, has a native semi-crystalline structure in which the arrangement of amorphous-crystalline domains governs its key properties such as mechanical and physico-chemical properties. The performance of the material in different situations is shaped by molecular mobility, which affects attributes such as mechanical properties, chemical reactivity, and water absorption. Nevertheless, it is difficult to investigate experimentally the structural and dynamic properties of cellulose-rich materials. This is especially the case for the glass transition, which impacts its quality and properties. This experimental challenge is notably evidenced by the considerable variability in data across the literature. The purpose of this study is to offer a comprehensive multi-scale exploration of dynamics within cellulose-rich materials, emphasizing literature data on cellulose glass transition and molecular relaxations, and providing insights into methods for characterizing their physical state and underscoring the impact of water-cellulose interactions on molecular mobility in these systems. The promising results obtained using multiple approaches bring out the importance of combining methods to achieve a more accurate and detailed understanding of the complex thermal transition in cellulose materials, particularly when considering the influence of water on their thermal dynamics and properties.

Advancing plant cell wall modelling: Atomistic insights into cellulose, disordered cellulose, and hemicelluloses - A review

The complexity of plant cell walls on different hierarchical levels still impedes the detailed understanding of biosynthetic pathways, interferes with processing in industry and finally limits applicability of cellulose materials. While there exist many challenges to readily accessing these hierarchies at (sub-) angström resolution, the development of advanced computational methods has the potential to unravel important questions in this field. Here, we summarize the contributions of molecular dynamics simulations in advancing the understanding of the physico-chemical properties of natural fibres. We aim to present a comprehensive view of the advancements and insights gained from molecular dynamics simulations in the field of carbohydrate polymers research. The review holds immense value as a vital reference for researchers seeking to undertake atomistic simulations of plant cell wall constituents. Its significance extends beyond the realm of molecular modeling and chemistry, as it offers a pathway to develop a more profound comprehension of plant cell wall chemistry, interactions, and behavior. By delving into these fundamental aspects, the review provides invaluable insights into future perspectives for exploration. Researchers within the molecular modeling and carbohydrates community can greatly benefit from this resource, enabling them to make significant strides in unraveling the intricacies of plant cell wall dynamics.

Role of microfibril angle in molecular deformation of cellulose fibrils in Pinus massoniana compression wood and opposite wood studied by in-situ WAXS

Upon tensile stress, the spiral cellulose fibrils in wood cell walls rotate like springs with decreasing microfibril angle (MFA), and the cellulose molecules elongate in the chain direction. Compression wood with high MFA and opposite wood with low MFA were comparatively studied by in-situ tensile tests combined with synchrotron radiation WAXS in the present study. FTIR spectroscopy revealed that compression wood had a higher lignin content and fewer acetyl groups. For both types of wood, the lattice spacing d004 increased and the MFA decreased gradually with the increase of tensile stress. At stresses beyond the yield point, cellulose lattice strain depended linearly on macroscopic stress, while the MFA depended linearly on macroscopic strain. The deformation mechanisms of compression wood and opposite wood are not essentially different but differ in their deformation behavior. Specifically, the contribution ratio of lattice strain and cellulose fibril reorientation to macroscopic strain was 0.25 and 0.53 for compression wood, and 0.40 and 0.33 for opposite wood, respectively. Due to the geometric effects of MFA, a greater contribution of cellulose fibril reorientation to the macroscopic deformation was detected in compression wood than in opposite wood.

Structure and growth of plant cell walls

Plant cells build nanofibrillar walls that are central to plant growth, morphogenesis and mechanics. Starting from simple sugars, three groups of polysaccharides, namely, cellulose, hemicelluloses and pectins, with very different physical properties are assembled by the cell to make a strong yet extensible wall. This Review describes the physics of wall growth and its regulation by cellular processes such as cellulose production by cellulose synthase, modulation of wall pH by plasma membrane H+-ATPase, wall loosening by expansin and signalling by plant hormones such as auxin and brassinosteroid. In addition, this Review discusses the nuanced roles, properties and interactions of cellulose, matrix polysaccharides and cell wall proteins and describes how wall stress and wall loosening cooperatively result in cell wall growth.

Three-dimensional printing of wood

Natural wood has served as a foundational material for buildings, furniture, and architectural structures for millennia, typically shaped through subtractive manufacturing techniques. However, this process often generates substantial wood waste, leading to material inefficiency and increased production costs. A potential opportunity arises if complex wood structures can be created through additive processes. Here, we demonstrate an additive-free, water-based ink made of lignin and cellulose, the primary building blocks of natural wood, that can be used to three-dimensional (3D) print architecturally designed wood structures via direct ink writing. The resulting printed structures, after heat treatment, closely resemble the visual, textural, olfactory, and macro-anisotropic properties, including mechanical properties, of natural wood. Our results pave the way for 3D-printed wooden construction with a sustainable pathway to upcycle/recycle natural wood.

Shape and Stiffness Switchable Hydroplastic Wood with Programmability and Reproducibility

Stiffness switchable materials (e.g., supramolecular polymers, metals) that alter their shape and mechanical properties in response to specific stimuli are potentially utilized in the structural engineering field but still limited due to the use of petroleum-based synthetic monomers and large energy consumption. Herein, a sustainable and facile solvent casting strategy is proposed to fabricate the "hydroplastic wood" with shape and stiffness switchable properties via cell wall wetting, cell wall softening and subsequent moisture evaporation. Therein, a wetting agent with low surface tension and low viscosity is utilized for covering the rough surface of solid wood to form a liquid lubricating layer, thereby increasing the interfacial wettability and achieving uniform softening of the cell walls. This interface wetting treatment can easily break through the hydro-plasticization process for thick wood (Balsa wood, Ochroma lagopus Swartz, density: 0.25 g/cm3; Pinewood, Pinus armandii, density: 0.38 g/cm3). Additionally, the capillary force arising from moisture evaporation induces the self-densification of oriented cellulose nanofibrils and achieves moisture-mediated shape design capabilities through periodic saturation-dehydration. This work makes hydroplastic wood a promising candidate for engineering materials because of its combined advantages of strong durability, formability, and load-carrying capacity.

Hornification of cellulose-rich materials - A kinetically trapped state

The fundamental understanding concerning cellulose-cellulose interactions under wet and dry conditions remains unclear. This is especially true regarding the drying-induced association of cellulose, commonly described as an irreversible phenomenon called hornification. A fundamental understanding of the mechanisms behind hornification would contribute to new drying techniques for cellulose-based materials in the pulp and paper industry while at the same time enhancing material properties and facilitating the recyclability of cellulose-rich materials. In the present work, the irreversible joining of cellulose-rich surfaces has been studied by subjecting cellulose nanofibril (CNF) films to different heat treatments to establish a link between reswelling properties, structural characteristics as well as chemical and mechanical analyses. A heating time/temperature dependence was observed for the reswelling of the CNF films, which is related to the extent of hornification and is different for different chemical compositions of the fibrils. Further, the results indicate that hornification is related to a diffusion process and that the reswellability increases very slowly over long time, indicating that equilibrium is not reached. Hence, hornification is suggested to be a kinetically limited phenomenon governed by non-covalent reversible interactions and a time/temperature dependence on their forming and breaking.

Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset

Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.

Diffusion in Intact Secondary Cell Wall Models of Plants at Different Equilibrium Moisture Content

Secondary plant cell walls are composed of carbohydrate and lignin polymers, and collectively represent a significant renewable resource. Leveraging these resources depends in part on a mechanistic understanding for diffusive processes within plant cell walls. Common wood protection treatments and biomass conversion processes to create biorefinery feedstocks feature ion or solvent diffusion within the cell wall. X-ray fluorescence microscopy experiments have determined that ionic diffusion rates are dependent on cell wall hydration as well as the ionic species through non-linear relationships. In this work, we use classical molecular dynamics simulations to map the diffusion behavior of different plant cell wall components (cellulose, hemicellulose, lignin), ions (Na⁺, K⁺, Cu²⁺, Cl^-) and water within a model for an intact plant cell wall at various hydration states (3-30 wt% water). From these simulations, we analyze the contacts between different plant cell wall components with each other and their interaction with the ions. Generally, diffusion increases with increasing hydration, with lignin and hemicellulose components increasing diffusion by an order of magnitude over the tested hydration range. Ion diffusion depends on charge. Positively charged cations preferentially interact with hemicellulose components, which include negatively charged carboxylates. As a result, positive ions diffuse more slowly than negatively charged ions. Measured diffusion coefficients are largely observed to best fit piecewise linear trends, with an inflection point between 10 and 15% hydration. These observations shed light onto the molecular mechanisms for diffusive processes within secondary plant cell walls at atomic resolution.

Spatioselective surface chemistry for the production of functional and chemically anisotropic nanocellulose colloids

Maximizing the benefits of nanomaterials from biomass requires unique considerations associated with their native chemical and physical structure. Both cellulose nanofibrils and nanocrystals are extracted from cellulose fibers via a top-down approach and have significantly advanced materials chemistry and set new benchmarks in the last decade. One major challenge has been to prepare defined and selectively modified nanocelluloses, which would, e.g., allow optimal particle interactions and thereby further improve the properties of processed materials. At the molecular and crystallite level, the surface of nanocelluloses offers an alternating chemical structure and functional groups of different reactivity, enabling straightforward avenues towards chemically anisotropic and molecularly patterned nanoparticles via spatioselective chemical modification. In this review, we will explain the influence and role of the multiscale hierarchy of cellulose fibers in chemical modifications, and critically discuss recent advances in selective surface chemistry of nanocelluloses. Finally, we will demonstrate the potential of those chemically anisotropic nanocelluloses in materials science and discuss challenges and opportunities in this field.