Microbuckled Mechano-electrochemical Harvesting Fiber for Self-Powered Organ Motion Sensors

Stretchable Micro-Wrinkled Carbon Nanotube-Assembled Skin-Adhesive Patches with Suction-Cup Patterns for Human Breath-Derived Moisture Energy Harvesting

With significant advances in self-powered, stretchable, and skin-attachable electronics, harvesting energy from ubiquitous moisture has emerged as a promising method for powering wearable and adhesive devices. However, current moisture energy harvesting (MEH) devices still face challenges in direct application to skin surfaces, mainly due to insufficient stretchability and weak adhesion, particularly under wet conditions. Here, we construct a stretchable and skin-adhesive MEH patch by harnessing microwrinkled carbon nanotube (CNT) sheets featuring asymmetric oxygen content and a highly elastic silicone rubber-polymer substrate with suction-cup patterns (SP). The developed MEH patch (2 cm × 4 cm) achieves an open-circuit voltage of ∼102 mV and a short-circuit current of ∼1.75 mA/m2 under ambient humidity variations. Notably, it maintains stable electrical output even when stretched up to 300% strain. The SP architecture introduced in the patch ensures robust adhesion to both dry and wet skin surfaces with the application of preload. Consequently, the stretchable and adhesive MEH patch can effectively convert breath-induced moisture energy into electric output on the philtrum, enabling self-powered monitoring of various respiratory patterns.

Mandrel-free fabrication of giant spring-index and stroke muscles for diverse applications

Methods for making high-spring-index polymer fiber or yarn muscles have required expensive fabrication by wrapping around a mandrel, which limits their practical applications. We demonstrate an inexpensive mandrel-free method for making polymer muscles that can have a spring index of >50 and a contractile tensile stroke exceeding 97%. This method enables the spring index to be varied along a muscle's length by varying the plying twist, resulting in muscles that transition between homochiral and heterochiral when either heated or cooled. We demonstrate use of these polymer muscles for robots and environmentally driven comfort-adjusting jackets. This mandrel-free method was used to make high-spring-index carbon nanotube yarns for mechanical energy harvesters, self-powered strain sensors, and solvent-driven and electrochemically driven artificial muscles.

Liquid-based encapsulation for implantable bioelectronics across broad pH environments

Wearable and implantable bioelectronics that can interface for extended periods with highly mobile organs and tissues across a broad pH range would be useful for various applications in basic biomedical research and clinical medicine. The encapsulation of these systems, however, presents a major challenge, as such devices require superior barrier performance against water and ion penetration in challenging pH environments while also maintaining flexibility and stretchability to match the physical properties of the surrounding tissue. Current encapsulation materials are often limited to near-neutral pH conditions, restricting their application range. In this work, we report a liquid-based encapsulation approach for bioelectronics under extreme pH environments. This approach achieves high optical transparency, stretchability, and mechanical durability. When applied to implantable wireless optoelectronic devices, our encapsulation method demonstrates outstanding water resistance in vitro, ranging from extremely acidic environments (pH = 1.5 and 4.5) to alkaline conditions (pH = 9). We also demonstrate the in vivo biocompatibility of our encapsulation approach and show that encapsulated wireless optoelectronics maintain robust operation throughout 3 months of implantation in freely moving mice. These results indicate that our encapsulation strategy has the potential to protect implantable bioelectronic devices in a wide range of research and clinical applications.

Carbon Nanotube Sheets/Elastomer Bilayer Harvesting Electrode with Biaxially Generated Electrical Energy

Mechanical energy harvesters made from soft and flexible materials can be employed as energy sources for wearable and implantable devices. However, considering how human organs and joints expand and bend in many directions, the energy generated in response to a mechanical stimulus in only one direction limits the applicability of mechanical energy harvesters. Here, we report carbon nanotube (CNT) sheets/an elastomer bilayer harvesting electrode (CBHE) that converts two-axis mechanical stimulation into electrical energy. The novel microwinkled structure of the CBHE successfully demonstrates an electrochemical double-layer (EDL) capacitance change from biaxial mechanical stimulation, thereby generating electrical power (0.11 W kg-1). Additionally, the low modulus (0.16 MPa) and high deformability due to the elastomeric substrate suggest that the CBHE can be applied to the human body.

Outstanding Synergy of Sensitivity and Linear Range Enabled by Multigradient Architectures

Flexible pressure sensors are devices that mimic the sensory capabilities of natural human skin and enable robots to perceive external stimuli. One of the main challenges is maintaining high sensitivity over a broad linear pressure range due to poor structural compressibility. Here, we report a flexible pressure sensor with an ultrahigh sensitivity of 153.3 kPa-1 and linear response over an unprecedentedly broad pressure range from 0.0005 to 1300 kPa based on interdigital-shaped, multigradient architectures, featuring modulus, conductivity, and microstructure gradients. Such multigradient architectures and interdigital-shaped configurations enable effective stress transfer and conductivity regulation, evading the pressure sensitivity-linear range trade-off dilemma. Together with high pressure resolution, high frequency response, and good reproducibility over the ultrabroad linear range, proof-of-concept applications such as acoustic wave detection, high-resolution pressure measurement, and healthcare monitoring in diverse scenarios are demonstrated.

Strategies for enhancing low-frequency performances of triboelectric, electrochemical, piezoelectric, and dielectric elastomer energy harvesting: recent progress and challenges

Mechanical energy harvesting transforms various forms of mechanical energy, including ocean waves, wind, and human motions, into electrical energy, providing a viable solution to address the depletion of fossil fuels and environmental problems. However, one major obstacle for the direct conversion of mechanical energy into electricity is the low frequency of the majority of mechanical energy sources (≤5 Hz), resulting in low energy conversion efficiency, output power and output current. Over recent years, a numerous innovative technologies have been reported to enable improved energy harvesting utilizing various mechanisms. This review aims to present an in-depth analysis of the research progress in low-frequency energy harvesting technologies that rely on triboelectric, electrochemical, piezoelectric, and dielectric elastomer effects. The discussion commences with an overview of the difficulties associated with low-frequency energy harvesting. The critical aspects that impact the low-frequency performance of mechanical energy harvesters, including working mechanisms, environmental factors, and device compositions, are elucidated, while the advantages and disadvantages of different mechanisms in low-frequency operation are compared and summarized. Moreover, this review expounds on the strategies that can improve the low-frequency energy harvesting performance through the modulations of material compositions, structures, and devices. It also showcases the applications of mechanical energy harvesters in energy harvesting via waves, wind, and human motions. Finally, the recommended choices of mechanical energy harvesters with different mechanisms for various applications are offered, which can assist in the design and fabrication process.

Recent Advances in Carbon Nanotube-Based Energy Harvesting Technologies

There has been enormous interest in technologies that generate electricity from ambient energy such as solar, thermal, and mechanical energy, due to their potential for providing sustainable solutions to the energy crisis. One driving force behind the search for new energy-harvesting technologies is the desire to power sensor networks and portable devices without batteries, such as self-powered wearable electronics, human health monitoring systems, and implantable wireless sensors. Various energy harvesting technologies have been demonstrated in recent years. Among them, electrochemical, hydroelectric, triboelectric, piezoelectric, and thermoelectric nanogenerators have been extensively studied because of their special physical properties, ease of application, and sometimes high obtainable efficiency. Multifunctional carbon nanotubes (CNTs) have attracted much interest in energy harvesting because of their exceptionally high gravimetric power outputs and recently obtained high energy conversion efficiencies. Further development of this field, however, still requires an in-depth understanding of harvesting mechanisms and boosting of the electrical outputs for wider applications. Here, various CNT-based energy harvesting technologies are comprehensively reviewed, focusing on working principles, typical examples, and future improvements. The last section discusses the existing challenges and future directions of CNT-based energy harvesters.