Metal-Organic Frameworks as Highly Active Electrocatalysts for High-Energy Density, Aqueous Zinc-Polyiodide Redox Flow Batteries

Zincophilic CuO as electron sponge to facilitate dendrite-free zinc-based flow battery

Zinc (Zn)-based batteries have been persistently challenged by the critical issue of inhomogeneous zinc deposition/stripping process on substrate surface. Herein, we reveal that zinc electrodeposition behaviors dramatically improved through the introduction of highly zincophilic copper oxide nanoparticles (CuO NPs). Strong electronic redistribution between Zn and CuO explains the high Zn affinity on CuO, with negligible nucleation overpotential. Additionally, CuO exhibits remarkable electron-accepting and -donating capabilities in electron-rich and electron-deficient environments, resembling a sponge. This 'Electron Sponge' effect emerges from stable Zn-O bonding in CuO, enhancing electron duality in the Zn-O bond region. This unique strategy is pivotal in mitigating dendritic growth, fostering dendrite-free zinc-based flow batteries with enhanced rate performance and cyclability. It presents significant performance with not only high energy density (180 Wh L-1) but also the long cycle stability (> 2500 cycles) at high current density (140 mA cm-2).

The design engineering of nanocatalysts for high power redox flow batteries

Redox flow batteries (RFBs) are one of the most promising long-term energy storage technologies which utilize the redox reaction of active species to realize charge and discharge. With the decoupled power and energy components, RFBs exhibit high battery pile construction flexibility and long lifespan. However, the inherent slow electrochemical kinetics of the current widely applied redox active species severely impedes the power output of RFBs. Developing high performance electrocatalysts for these redox active species would boost the power output and energy efficiency of RFBs. Here, we present a critical review of nanoelectrocatalysts to improve the sluggish kinetics of different redox active species, mainly including the chemical components, structure and integration methods. The relationship between the physicochemical properties of nanoelectrocatalysts and the power output of RFBs is highlighted. Finally, the future design of nanoelectrocatalysts for commercial RFBs is proposed.

Effective Enhancement of Energy Density of Zinc-Polyiodide Flow Batteries by Organic/Penta-iodide Complexation

Based on the ambipolar characteristics and high solubility of ZnI2, zinc-polyiodide flow batteries (ZIFB) have attracted attention as high-energy density flow batteries. However, due to the various oxidation products of iodide (I-) and the formation of iodine (I2) solid precipitates at the positive electrode, the limiting state-of-charge (SoC) of ZIFB has not been clearly defined. Herein, a clear definition of SoC in ZIFBs is given based on the thermodynamic relationship among I-(aq), I3-(aq), I5-(aq), and I2(aq) in the electrolyte. Conventional ZIFBs are limited by their maximum attainable SoC of 87%, at which the fully charged catholyte includes I-, I3-, and I5- ions at molar ratios of 49.6, 32.2, and 18.1%, respectively. Furthermore, two effective strategies to extend the maximum SoC are suggested: (1) increasing the formation constant (Keq) of I3- can raise the availability of I- for electrooxidation by suppressing I2 precipitation, and (2) promoting the production of higher-order polyiodides such as I5- can increase the oxidation state of the charged electrolyte. The addition of 5 vol % triethylene glycol (tri-EG) to the electrolyte increased Keq from 710 to 1123 L mol-1; this increase was confirmed spectrophotometrically. Tri-EG stabilized I5- ions in the form of the I5-/tri-EG complex, thereby converting the main oxidation product from I3- to I5-. The preferred electrochemical production of I5- in the tri-EG electrolyte was observed by electrochemical and computational analyses. As a result, the maximum attainable SoC was enhanced remarkably to 116%, yielding molar ratios of I-, I3-, and I5- ions of 9.1, 11.2, and 79.7%, respectively. This SoC extension effect was confirmed in the ZIFB flow cell with stable charge-discharge cycling at the SoC 120% limit, demonstrating the highest energy density, 249.9 Wh L-1, among all reported ZIFBs.

Recent advances on surface mounted metal-organic frameworks for energy storage and conversion applications: Trends, challenges, and opportunities

Establishing green and reliable energy resources is very important to counteract the carbon footprints and negative impact of non-renewable energy resources. Metal-organic frameworks (MOFs) are a class of porous material finding numerous applications due to their exceptional qualities, such as high surface area, low density, superior structural flexibility, and stability. Recently, increased attention has been paid to surface mounted MOFs (SURMOFs), which is nothing but thin film of MOF, as a new category in nanotechnology having unique properties compared to bulk MOFs. With the advancement of material growth and synthesis technologies, the fine tunability of film thickness, consistency, size, and geometry with a wide range of MOF complexes is possible. In this review, we recapitulate various synthesis approaches of SURMOFs including epitaxial synthesis approach, direct solvothermal method, Langmuir-Blodgett LBL deposition, Inkjet printing technique and others and then correlated the synthesis-structure-property relationship in terms of energy storage and conversion applications. Further the critical assessment and current problems of SURMOFs have been briefly discussed to explore the future opportunities in SURMOFs for energy storage and conversion applications.

Conversion-Type Cathode Materials for Aqueous Zn Metal Batteries in Nonalkaline Aqueous Electrolytes: Progress, Challenges, and Solutions

Aqueous Zn metal batteries are attractive as safe and low-cost energy storage systems. At present, due to the narrow window of the aqueous electrolyte and the strong reliance of the Zn2+ ion intercalated reaction on the host structure, the current intercalated cathode materials exhibit restricted energy densities. In contrast, cathode materials with conversion reactions can promise higher energy densities. Especially, the recently reported conversion-type cathode materials that function in nonalkaline electrolytes have garnered increasing attention. This is because the use of nonalkaline electrolytes can prevent the occurrence of side reactions encountered in alkaline electrolytes and thereby enhance cycling stability. However, there is a lack of comprehensive review on the reaction mechanisms, progress, challenges, and solutions to these cathode materials. In this review, four kinds of conversion-type cathode materials including MnO2 , halogen materials (Br2 and I2 ), chalcogenide materials (O2 , S, Se, and Te), and Cu-based compounds (CuI, Cu2 O, Cu2 S, CuO, CuS, and CuSe) are reviewed. First, the reaction mechanisms and battery structures of these materials are introduced. Second, the fundamental problems and their corresponding solutions are discussed in detail in each material. Finally, future directions and efforts for the development of conversion-type cathode materials for aqueous Zn batteries are proposed.

Electrode Materials for Enhancing the Performance and Cycling Stability of Zinc Iodide Flow Batteries at High Current Densities

Aqueous redox flow battery systems that use a zinc negative electrode have a relatively high energy density. However, high current densities can lead to zinc dendrite growth and electrode polarization, which limit the battery's high power density and cyclability. In this study, a perforated copper foil with a high electrical conductivity was used on the negative side, combined with an electrocatalyst on the positive electrode in a zinc iodide flow battery. A significant improvement in the energy efficiency (ca. 10% vs using graphite felt on both sides) and cycling stability at a high current density of 40 mA cm^-2 was observed. A long cycling stability with a high areal capacity of 222 mA h cm^-2 is obtained in this study, which is the highest reported areal capacity for zinc-iodide aqueous flow batteries operating at high current density, in comparison to previous studies. Additionally, the use of a perforated copper foil anode in combination with a novel flow mode was discovered to achieve consistent cycling at exceedingly high current densities of >100 mA cm^-2. In situ and ex situ characterization techniques, including in situ atomic force microscopy coupled with in situ optical microscopy and X-ray diffraction, are applied to clarify the relationship between zinc deposition morphology on the perforated copper foil and battery performance in two different flow field conditions. With a portion of the flow going through the perforations, a significantly more uniform and compact zinc deposition was observed compared to the case where all of the flow passed over the surface of the electrode. Results from modeling and simulation support the conclusion that the flow of a fraction of electrolyte through the electrode enhances mass transport, enabling a more compact deposit.

Recent Advances of Aqueous Rechargeable Zinc-Iodine Batteries: Challenges, Solutions, and Prospects

Aqueous rechargeable zinc-iodine batteries (ZIBs), including zinc-iodine redox flow batteries and static ZIBs, are promising candidates for future grid-scale electrochemical energy storage. They are safe with great theoretical capacity, high energy, and power density. Nevertheless, to make aqueous rechargeable ZIBs practically feasible, there are quite a few hurdles that need to be overcome, including self-discharge, sluggish kinetics, low energy density, and instability of Zn metal anodes. This article first reviews the electrochemistry in aqueous rechargeable ZIBs, including the flow and static battery configurations and their electrode reactions. Then the authors discuss the fundamental questions of ZIBs and highlight the key strategies and recent accomplishments in tackling the challenges. Last, they share their thoughts on the future research development in aqueous rechargeable ZIBs.

TiO2 Containing Hybrid Composite Polymer Membranes for Vanadium Redox Flow Batteries

In recent years, vanadium redox flow batteries (VRFB) have captured immense attraction in electrochemical energy storage systems due to their long cycle life, flexibility, high-energy efficiency, time, and reliability. In VRFB, polymer membranes play a significant role in transporting protons for current transmission and act as barriers between positive and negative electrodes/electrolytes. Commercial polymer membranes (such as Nafion) are the widely used IEM in VRFBs due to their outstanding chemical stability and proton conductivity. However, the membrane cost and increased vanadium ions permeability limit its commercial application. Therefore, various modified perfluorinated and non-perfluorinated membranes have been developed. This comprehensive review primarily focuses on recent developments of hybrid polymer composite membranes with inorganic TiO₂ nanofillers for VRFB applications. Hence, various fabrications are performed in the membrane with TiO₂ to alter their physicochemical properties for attaining perfect IEM. Additionally, embedding the -SO₃H groups by sulfonation on the nanofiller surface enhances membrane proton conductivity and mechanical strength. Incorporating TiO₂ and modified TiO₂ (sTiO₂, and organic silica modified TiO₂) into Nafion and other non-perfluorinated membranes (sPEEK and sPI) has effectively influenced the polymer membrane properties for better VRFB performances. This review provides an overall spotlight on the impact of TiO₂-based nanofillers in polymer matrix for VRFB applications.

Triiodide-in-Iodine Networks Stabilized by Quaternary Ammonium Cations as Accelerants for Electrode Kinetics of Iodide Oxidation in Aqueous Media

The Zn-polyiodide redox flow battery is considered to be a promising aqueous energy storage system. However, in its charging process, the electrode kinetics of I^- oxidation often suffer from an intrinsically generated iodine film (I₂-F) on the cathode of the battery. Therefore, it is critical to both understand and enhance the observed slow electrode kinetics of I^- oxidation by an electrochemically generated I₂-F. In this article, we introduced an electrogenerated N-methyl-N-ethyl pyrrolidinium iodide (MEPI)-iodine (I₂) solution, designated as MEPIS, and demonstrated that the electrode kinetics of I^- oxidation were dramatically enhanced compared to an I₂-F under conventional electrolyte conditions, such as NaI. We showed that this result mainly contributed to the fast electro-oxidation of triiodide (I₃^-), which exists in the shape of a I₃^--in-I₂ network, [I₃^-·(I₂)_n]. Raman spectroscopic and electrochemical analyses showed that the composition of electrogenerated MEPIS changed from I₃^- to [I₃^-·(I₂)_n] via I₅^- as the anodic overpotential increased. We also confirmed that I^- was electrochemically oxidized on a MEPIS-modified Pt electrode with fast electrode kinetics, which is clearly contrary to the nature of an I₂-F derived from a NaI solution as a kinetic barrier of I^- oxidation. Through stochastic MEPIS-particle impact electrochemistry and electrochemical impedance spectroscopy, we revealed that the enhanced electrode kinetics of I^- oxidation in MEPIS can be attributed to the facilitated charge transfer of I₃^- oxidation in [I₃^-·(I₂)_n]. In addition, we found that the degree of freedom of I₃^- in a quaternary ammonium-based I₂-F can also be critical to determine the kinetics of the electro-oxidation of I^-, which is that MEPIS showed more enhanced charge-transfer kinetics of I^- oxidation compared to tetrabutylammonium I₃^- due to the higher degree of freedom of I₃^-.

Prototypical Study of Double-Layered Cathodes for Aqueous Rechargeable Static Zn-I2 Batteries

Aqueous rechargeable zinc-iodine batteries (ZIBs) are promising candidates for grid energy storage because they are safe and low-cost and have high energy density. However, the shuttling of highly soluble triiodide ions severely limits the device's Coulombic efficiency. Herein, we demonstrate for the first time a double-layered cathode configuration with a conductive layer (CL) coupled with an adsorptive layer (AL) for ZIBs. This unique cathode structure enables the formation and reduction of adsorbed I₃^- ions at the CL/AL interface, successfully suppressing triiodide ion shuttling. A prototypical ZIB using a carbon cloth as the CL and a polypyrrole layer as the AL simultaneously achieves outstanding Coulombic efficiency (up to 95.6%) and voltage efficiency (up to 91.3%) in the aqueous ZnI₂ electrolyte even at high-rate intermittent charging/discharging, without the need of ion selective membranes. These findings provide new insights to the design and fabrication of ZIBs and other batteries based on conversion reactions.

Effect of an Iodine Film on Charge-Transfer Resistance during the Electro-Oxidation of Iodide in Redox Flow Batteries

The use of iodide as the positive redox-active species in redox flow batteries has been highly anticipated owing to its attractive features of high solubility, excellent reversibility, and low cost. However, the electro-oxidation reaction of iodide (I^-) is very complicated, giving various possible products such as iodine (I₂), polyiodides (I_2n+1^-), and polyiodines (I_2n+2) with n ≥ 1. In particular, the electro-oxidation of I^-/I₃^- and I₃^-/I₂ occurs in competition depending on the applied potential. Although the former reaction is adopted as the main reaction in most redox flow batteries because I₃^- is highly soluble in an aqueous electrolyte, the latter reaction inevitably occurs together and a thick I₂-film forms on the electrode, impeding the electro-oxidation of I^-. In this study, we investigate the variation of the interface between the electrode and the electrolyte during the development of an I₂-film and the corresponding change in the charge-transfer resistance (R_ct). Initially, the I₂-film builds upon the electrode surface in the form of a porous layer and the aqueous I^- ions can easily reach the electrode surface through pores inside the film. I^- ions are electro-oxidized to I₃^- or I₂ at the interface between the aqueous I^- phase and electrode with a small R_ct of less than 16.5 ohm·cm². Over time, the I₂-film is converted into a dense layer and I^- ions diffuse through the film in the form of I₃^-, possibly by a Grotthuss-type hopping mechanism. I₃^- can then be electro-oxidized to I₂ at the new interface between the I₂-film and electrode, resulting in a dramatic 9-fold increase of R_ct to 147.4 ohm·cm². This increase of R_ct by the dense I₂-film is also observed in the actual flow battery. At high current densities above 400 mA·cm^-2, the overpotential begins to show an abrupt increase in the amplitude of more than 300 mV after reaching a critical charging capacity at which the dense I₂-film appears to have begun to form on the felt electrode. Therefore, the I₂-film exerts a serious negative effect on the performance of the flow battery depending on the current density and electrolyte SoC (state-of-charge).

Synthetic strategies to incorporate Ru-terpyridyl water oxidation catalysts into MOFs: direct synthesis vs. post-synthetic approach

Incorporating molecular catalysts into metal-organic frameworks (MOFs) is a promising strategy for improving their catalytic longevity and recyclability. In this article, we investigate and compare synthetic routes for the incorporation of the potent water oxidation catalyst Ru(tda)(pyCO2H)2 (tda = 2,2':6',2''-terpyridine-6,6''-dicarboxylic acid, pyCO2H = iso-nicotinic acid) as a structural linker into a Zr-based UiO-type MOF. The task is challenging with this particular metallo-linker because of the equatorial dangling carboxylates that can potentially compete for Zr-coordination, as well as free rotation of the pyCO2H groups around the HO2CpyRupyCO2H axis. As a consequence, all attempts to synthesize a MOF with the metallo-linker directly under solvothermal conditions led to amorphous materials with the Ru(tda)(pyCO2H)2 linker coordinating to the Zr nodes in ill-defined ways, resulting in multiple waves in the cyclic voltammograms of the solvothermally obtained materials. On the other hand, an indirect post-synthetic approach in which the Ru(tda)(pyCO2H)2 linker is introduced into a preformed edba-MOF (edba = ethyne dibenzoic acid) of UiO topology results in the formation of the desired material. Interestingly, two distinctly different morphologies of the parent edba-MOF have been discovered, and the impact that the morphological difference has on linker incorporation is investigated.

A Metal-Organic Framework as a Multifunctional Ionic Sieve Membrane for Long-Life Aqueous Zinc-Iodide Batteries

The introduction of the redox couple of triiodide/iodide (I₃ ^- /I^- ) into aqueous rechargeable zinc batteries is a promising energy-storage resource owing to its safety and cost-effectiveness. Nevertheless, the limited lifespan of zinc-iodine (Zn-I₂ ) batteries is currently far from satisfactory owing to the uncontrolled shuttling of triiodide and unfavorable side-reactions on the Zn anode. Herein, space-resolution Raman and micro-IR spectroscopies reveal that the Zn anode suffers from corrosion induced by both water and iodine species. Then, a metal-organic framework (MOF) is exploited as an ionic sieve membrane to simultaneously resolve these problems for Zn-I₂ batteries. The multifunctional MOF membrane, first, suppresses the shuttling of I₃ ^- and restrains related parasitic side-reaction on the Zn anode. Furthermore, by regulating the electrolyte solvation structure, the MOF channels construct a unique electrolyte structure (more aggregative ion associations than in saturated electrolyte). With the concurrent improvement on both the iodine cathode and the Zn anode, Zn-I₂ batteries achieve an ultralong lifespan (>6000 cycles), high capacity retention (84.6%), and high reversibility (Coulombic efficiency: 99.65%). This work not only systematically reveals the parasitic influence of free water and iodine species to the Zn anode, but also provides an efficient strategy to develop long-life aqueous Zn-I₂ batteries.

A pH-Neutral, Aqueous Redox Flow Battery with a 3600-Cycle Lifetime: Micellization-Enabled High Stability and Crossover Suppression

Redox-flow batteries (RFBs) are a highly promising large-scale energy storage technology for mitigating the intermittent nature of renewable energy sources. Here, the design and implementation of a micellization strategy in an anthraquinone-based, pH-neutral, nontoxic, and metal-free aqueous RFB is reported. The micellization strategy (1) improves stability by protecting the redox-active anthraquinone core with a hydrophilic poly(ethylene glycol) shell and (2) increases the overall size to mitigate the crossover issue through a physical blocking mechanism. Paired with a well-established potassium ferrocyanide catholyte, the micelle-based RFB displayed an excellent capacity retention of 90.7 % after 3600 charge/discharge cycles (28.3 days), corresponding to a capacity retention of 99.67 % per day and 99.998 % per cycle. The mechanistic studies of redox-active materials were also conducted and indicated the absence of side reactions commonly observed in other anthraquinone-based RFBs. The outstanding performance of the RFB demonstrates the effectiveness of the micellization strategy for enhancing the performance of organic material-based aqueous RFBs.

Analysis of Electrocatalytic Metal-Organic Frameworks

The electrochemical analysis of molecular catalysts for the conversion of bulk feedstocks into energy-rich clean fuels has seen dramatic advances in the last decade. More recently, increased attention has focused on the characterization of metal-organic frameworks (MOFs) containing well-defined redox and catalytically active sites, with the overall goal to develop structurally stable materials that are industrially relevant for large-scale solar fuel syntheses. Successful electrochemical analysis of such materials draws heavily on well-established homogeneous techniques, yet the nature of solid materials presents additional challenges. In this tutorial-style review, we cover the basics of electrochemical analysis of electroactive MOFs, including considerations of bulk stability, methods of attaching MOFs to electrodes, interpreting fundamental electrochemical data, and finally electrocatalytic kinetic characterization. We conclude with a perspective of some of the prospects and challenges in the field of electrocatalytic MOFs.

Advanced Materials for Zinc-Based Flow Battery: Development and Challenge

Zinc-based flow batteries (ZFBs) are well suitable for stationary energy storage applications because of their high energy density and low-cost advantages. Nevertheless, their wide application is still confronted with challenges, which are mainly from advanced materials. Therefore, research on advanced materials for ZFBs in terms of electrodes, membranes, and electrolytes as well as their chemistries are of the utmost importance. Herein, the focus is on the scientific understandings of the fundamental design of these advanced materials and their chemistries in relation to the battery performance. The principles of using different materials in different ZFB technologies, the functions and structure of the materials, and further material improvements are discussed in detail. Finally, the challenges and prospects of ZFBs are summarized as well. This review provides valuable instruction on how to design and develop new materials as well as new chemistries for ZFBs.

MoS2-modified graphite felt as a high performance electrode material for zinc–polyiodide redox flow batteries

MoS₂ nanoplates were in situ grafted onto graphite felt to enable high performance zinc–polyiodine redox flow batteries.

Rechargeable redox flow batteries: flow fields, stacks and design considerations

Rechargeable redox flow batteries are being developed for medium and large-scale stationary energy storage applications. Flow batteries could play a significant role in maintaining the stability of the electrical grid in conjunction with intermittent renewable energy. However, they are significantly different from conventional batteries in operating principle. Recent contributions on flow batteries have addressed various aspects, including electrolyte, electrode, membrane, cell design, etc. In this review, we focus on the less-discussed practical aspects of devices, such as flow fields, stack and design considerations for developing high performance large-scale flow batteries. Finally, we provide suggestions for further studies on developing advanced flow batteries and large-scale flow battery stacks.

Metal Organic Framework Derived Materials: Progress and Prospects for the Energy Conversion and Storage

Exploring new materials with high efficiency and durability is the major requirement in the field of sustainable energy conversion and storage systems. Numerous techniques have been developed in last three decades to enhance the efficiency of the catalyst systems, control over the composition, structure, surface area, pore size, and moreover morphology of the particles. In this respect, metal organic framework (MOF) derived catalysts are emerged as the finest materials with tunable properties and activities for the energy conversion and storage. Recently, several nano- or microstructures of metal oxides, chalcogenides, phosphides, nitrides, carbides, alloys, carbon materials, or their hybrids are explored for the electrochemical energy conversion like oxygen evolution, hydrogen evolution, oxygen reduction, or battery materials. Interest on the efficient energy storage system is also growing looking at the practical applications. Though, several reviews are available on the synthesis and application of MOF and MOF derived materials, their applications for the electrochemical energy conversion and storage is totally a new field of research and developed recently. This review focuses on the systematic design of the materials from MOF and control over their inherent properties to enhance the electrochemical performances.

Emerging crystalline porous materials as a multifunctional platform for electrochemical energy storage

Metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs) are two emerging and explosively growing families of crystalline porous materials (CPMs). These robust frameworks are characterized by their extraordinary porosity, tremendous structural diversity, and versatile functional tunability with precision at the molecular level. In this review, we present recent milestones of MOFs and COFs in the fields of batteries and supercapacitors, two important technologies in electrochemical energy storage (EES), and highlight the functions that a CPM can offer in EES devices, including the storage of electrochemical energy, stabilization of electrode materials, pathways for charge transport, manipulation on mass transport, and promotion of electrochemical reactions. Key requirements for each function are discussed, with future directions provided for further development.

Tunable chiral metal organic frameworks toward visible light-driven asymmetric catalysis

A simple and effective strategy is developed to realize visible light-driven heterogeneous asymmetric catalysis. A chiral organic molecule, which only has very weak catalytic activity in asymmetric α-alkylation of aldehydes under visible light, is utilized as the ligand to coordinate with different types of metal ions, including Zn²⁺, Zr⁴⁺, and Ti⁴⁺, for construction of crystalline metal organic frameworks (MOFs). Impressively, when used as heterogeneous catalysts, all of the synthesized MOFs exhibit markedly enhanced activity. Furthermore, the asymmetric catalytic performance of these MOFs could be easily altered by selecting different metal ions, owing to the tunable electron transfer property between metal ions and chiral ligands. This work will provide a new approach for fabrication of heterogeneous catalysts and trigger more enthusiasm to conduct the asymmetric catalysis driven by visible light.

Synthesis of ordered carbonaceous frameworks from organic crystals

Despite recent advances in the carbonization of organic crystalline solids like metal-organic frameworks or supramolecular frameworks, it has been challenging to convert crystalline organic solids into ordered carbonaceous frameworks. Herein, we report a route to attaining such ordered frameworks via the carbonization of an organic crystal of a Ni-containing cyclic porphyrin dimer (Ni₂-CPD_Py). This dimer comprises two Ni-porphyrins linked by two butadiyne (diacetylene) moieties through phenyl groups. The Ni₂-CPD_Py crystal is thermally converted into a crystalline covalent-organic framework at 581 K and is further converted into ordered carbonaceous frameworks equipped with electrical conductivity by subsequent carbonization at 873-1073 K. In addition, the porphyrin's Ni-N₄ unit is also well retained and embedded in the final framework. The resulting ordered carbonaceous frameworks exhibit an intermediate structure, between organic-based frameworks and carbon materials, with advantageous electrocatalysis. This principle enables the chemical molecular-level structural design of three-dimensional carbonaceous frameworks.Carbon-based materials are promising alternatives to noble metal catalysts, but their structures are typically disordered and difficult to control. Here, the authors obtain ordered carbonaceous frameworks with advantageous electrocatalytic properties via the carbonization of nickel-containing porphyrin dimer networks.

Surface-supported metal–organic framework thin films: fabrication methods, applications, and challenges

Surface-supported metal–organic framework thin films are receiving increasing attention as a novel form of nanotechnology, which hold great promise for photovoltaics, electronic devices, CO₂ reduction, energy storage, water splitting and membranes.