Structural Features of Polymer Ligand Environments Dramatically Affect the Mechanical and Room-Temperature Self-Healing Properties of Cobalt(II)-Incorporating Polysiloxanes

Iridium(III)-Incorporating Self-Healing Polysiloxanes as Materials for Light-Emitting Oxygen Sensors

Polymer-metal complexes (PMCs) based on poly(2,2'-bipyridine-4,4'-dicarboxamide-co-polydimethylsiloxanes) with cyclometalated di(2-phenylpyridinato-C2,N')iridium(III) fragments and cross-linked by Zn2+ (Zn[Ir]-BipyPDMSs) or Ir3+ (Ir[Ir]-BipyPDMSs) represent flexible, stretchable, phosphorescent, and self-healing molecular oxygen sensors. PMCs provide strong phosphorescence at λem = 595-605 nm. Zn[Ir]-BipyPDMS with PDMS chain length of Mn = 5000 has the highest quantum yield of 9.3% and is a molecular oxygen sensor at different O2 concentrations (0-100 vol%) compared to Ir[Ir]-BipyPDMSs. A Stern-Volmer constant is determined for Zn[Ir]-BipyPDMS as KSV = 0.014%-1, which is similar to the reported oxygen-sensitive iridium(III) complexes. All synthesized PMCs exhibit high elongation at break (up to 1100%) and self-healing efficiency (up to 99%).

Constructing Self-Healing Polydimethylsiloxane through Molecular Structure Design and Metal Ion Bonding

Self-healing polydimethylsiloxane (PDMS) has garnered significant attention due to its potential applications across various fields. In this study, a functionalized modification of PDMS containing di-aminos was initially conducted using 2,6-pyridinedicarbonyl chloride to synthesize pyridine-PDMS (Py-PDMS). Subsequently, rare earth metal europium ions (Eu3+) were incorporated into Py-PDMS. Due to the coordination interaction between Eu3+ and organic ligands, a coordination cross-linking network was created within the Py-PDMS matrix, resulting in the fabrication of Eu3+-Py-PDMS elastomer. At a molar ratio of Eu3+ to ligands of 1:1, the tensile strength of Eu3+-Py-PDMS reached 1.4 MPa, with a fracture elongation of 824%. Due to the dynamic reversibility of coordination bonds, Eu3+-Py-PDMS with a metal-to-ligand molar ratio of 1:2 exhibited varying self-healing efficiencies at different temperatures. Notably, after 4 h of repair at 60 °C, its self-healing efficiency reached nearly 100%. Furthermore, the gas barrier properties of Eu3+-Py-PDMS with a molar ratio of 1:1 was improved compared with that of Eu3+-Py-PDMS with a molar ratio of 1:1. This study provides an effective strategy for the design and fabrication of PDMS with high mechanical strength, high gas barrier properties, and exceptional self-healing efficiency.

Synergistic Self-Healing Enhancement in Multifunctional Silicone Elastomers and Their Application in Smart Materials

Organosilicon polymers (silicones) are of enduring interest both as an established branch of polymer chemistry and as a segment of commercial products. Their unique properties were exploited in a wide range of everyday applications. However, current silicone trends in chemistry and materials engineering are focused on new smart applications, including stretchable electronics, wearable stress sensors, protective coatings, and soft robotics. Such applications require a fresh approach to methods for increasing the durability and mechanical strength of polysiloxanes, including crosslinked systems. The introduction of self-healing options to silicones has been recognized as a promising alternative in this field, but only carefully designed multifunctional systems operating with several different self-healing mechanisms can truly address the demands placed on such valuable materials. In this review, we summarized the progress of research efforts dedicated to the synthesis and applications of self-healing hybrid materials through multi-component systems that enable the design of functional silicon-based polymers for smart applications.

Progress in the Field of Cyclophosphazenes: Preparation, Properties, and Applications

This review article provides a comprehensive overview of recent advancements in the realm of cyclophosphazenes, encompassing their preparation methodologies, distinctive properties, and diverse applications. The synthesis approaches are explored, highlighting advancements in the preparation of these cyclic compounds. The discussion extends to the distinctive properties exhibited by cyclophosphazenes, including thermal stability characteristics, and other relevant features. Furthermore, we examine the broad spectrum of applications for cyclophosphazenes in various fields, such as coatings, adhesives, composites, extractants, metal complexes, organometallic chemistry, medicine, and inorganic chemistry. This review aims to offer insights into the evolving landscape of cyclophosphazenes and their ever-expanding roles in contemporary scientific and technological arenas. Future possibilities are emphasized, and significant research data shortages are identified.

Integrated Extrinsic and Intrinsic Self-Healing of Polysiloxane Materials by Cleavable Molecular Cages Encapsulating Fluoride Ions

Self-healing ability is crucial to increasing the lifetime and reliability of materials. In this study, spatiotemporal control of the healing of a polysiloxane material is achieved using a cleavable cage compound encapsulating a fluoride ion (F- ), which triggeres the dynamic rearrangement of the siloxane (Si-O-Si) networks. A self-healing siloxane-based elastomer is prepared by cross-linking polydimethylsiloxane (PDMS) with a F- -encapsulating cage-type germoxane (Ge-O-Ge) compound. This material can self-heal repeatedly under humid conditions. The F- released by hydrolytic cleavage of the cage framework contributes to rejoining of the cut pieces by promoting the local rearrangement of the siloxane networks. The use of a molecular cage encapsulating a catalyst for dynamic bond rearrangement provides a new concept for designing self-healing polysiloxane materials based on integrated extrinsic and intrinsic mechanisms.

Fast Self-Healing at Room Temperature in Diels-Alder Elastomers

Despite being primarily categorized as non-autonomous self-healing polymers, we demonstrate the ability of Diels-Alder polymers to heal macroscopic damages at room temperature, resulting in complete restoration of their mechanical properties within a few hours. Moreover, we observe immediate partial recovery, occurring mere minutes after reuniting the fractured surfaces. This fast room-temperature healing is accomplished by employing an off-stoichiometric maleimide-to-furan ratio in the polymer network. Through an extensive investigation of seven Diels-Alder polymers, the influence of crosslink density on self-healing, thermal, and (thermo-)mechanical performance was thoroughly examined. Crosslink density variations were achieved by adjusting the molecular weight of the monomers or utilizing the off-stoichiometric maleimide-to-furan ratio. Quasistatic tensile testing, dynamic mechanical analysis, dynamic rheometry, differential scanning calorimetry, and thermogravimetric analysis were employed to evaluate the individual effects of these parameters on material performance. While lowering the crosslink density in the polymer network via decreasing the off-stoichiometric ratio demonstrated the greatest acceleration of healing, it also led to a slight decrease in (dynamic) mechanical performance. On the other hand, reducing crosslink density using longer monomers resulted in faster healing, albeit to a lesser extent, while maintaining the (dynamic) mechanical performance.

Self-Healing Silicone Materials: Looking Back and Moving Forward

This review is dedicated to self-healing silicone materials, which can partially or entirely restore their original characteristics after mechanical or electrical damage is caused to them, such as formed (micro)cracks, scratches, and cuts. The concept of self-healing materials originated from biomaterials (living tissues) capable of self-healing and regeneration of their functions (plants, human skin and bones, etc.). Silicones are ones of the most promising polymer matrixes to create self-healing materials. Self-healing silicones allow an increase of the service life and durability of materials and devices based on them. In this review, we provide a critical analysis of the current existing types of self-healing silicone materials and their functional properties, which can be used in biomedicine, optoelectronics, nanotechnology, additive manufacturing, soft robotics, skin-inspired electronics, protection of surfaces, etc.

Structural Features of Eu3+ and Tb3+-Bipyridinedicarboxamide Complexes

Photoluminescent lanthanide complexes of Eu³⁺ and Tb³⁺ as central atoms and N⁶,N⁶'-diisopropyl-[2,2'-bipyridine]-6,6'-dicarboxamide as ligand were synthesized. The structure of these complexes was established by single-crystal X-ray diffraction, mass spectrometry, ¹H and ¹³C nuclear magnetic resonance, ultraviolet-visible, infrared spectroscopy, and thermogravimetry. Bipyridinic ligands provide formation of coordinatively saturated complexes of lanthanide ions and strong photoluminescence (PL). The Eu³⁺- and Tb³⁺-complexes exhibit PL emission in the red and green regions observed at a 340 nm excitation. The quantum yield for the complexes was revealed to be 36.5 and 12.6% for Tb³⁺- and Eu³⁺-complexes, respectively. These lanthanide compounds could be employed as photoluminescent solid-state compounds and as emitting fillers in polymer (for example, polyethylene glycol) photoluminescent materials.

Silicone Materials for Flexible Optoelectronic Devices

Polysiloxanes and materials based on them (silicone materials) are of great interest in optoelectronics due to their high flexibility, good film-forming ability, and optical transparency. According to the literature, polysiloxanes are suggested to be very promising in the field of optoelectronics and could be employed in the composition of liquid crystal devices, computer memory drives organic light emitting diodes (OLED), and organic photovoltaic devices, including dye synthesized solar cells (DSSC). Polysiloxanes are also a promising material for novel optoectronic devices, such as LEDs based on arrays of III-V nanowires (NWs). In this review, we analyze the currently existing types of silicone materials and their main properties, which are used in optoelectronic device development.

A Facile Molding Method of Continuous Fiber-Reinforced Thermoplastic Composites and its Mechanical Property

The mechanical properties of continuous fiber-reinforced thermoplastic (C-FRTP) composites are commonly lower than those of continuous fiber-reinforced thermosetting plastic (C-FRP) composites. We have developed a new molding method for C-FRTP. In this study, pre-impregnated materials were successfully prepared by polymer solution impregnation method and, finally, C-FRTP was fabricated. The viscosity of the thermoplastic matrix was decreased to approximately 3dPa×s, the same level of epoxy, and the fiber volume fraction was increased from approximately 45 to 60%. The cross-section of specimens were polished by an ion milling system and impregnation condition was investigated by scanning electron microscopy (SEM). The micrographs suggested that thermoplastic polymer was impregnated to every corner of the fiber, and no void was found on the cross-section. It revealed that void-free composites with perfect mechanical properties can be manufactured with this new molding method. All specimens were submitted to a mechanical measuring equipment, and the mechanical properties of the composite specimens were investigated. Mechanical analysis revealed that tensile property and flexural property of C-FRTP were enhanced up to the same level with C-FRP.