Bimetallic Nickel Complexes Containing Benzotriazole-Derived Diamine-Bisphenolate Ligands as Highly Active Catalysts for the Copolymerization of Carbon Dioxide with Cyclohexene Oxide: Synthesis, Catalysis, and Kinetics

Non-covalent interactions in molecular architectures and solvent-free catalytic activity towards CO2 fixation of mononuclear Co(III) complexes installed on modified Schiff base ligands

A set of mononuclear cobalt(III) octahedral complexes {[Co(LH)(acac)] (Co-1H), [Co(LBr)(acac)] (Co-1Br), and [Co(LNO2)(acac)] (Co-1NO2)} were synthesized using new-generation N/O donors, maleonitrile-tethered, tetradentate heteroscorpionate half-reduced Schiff base ligands, 2-((E)-2-hydroxybenzylideneamino)-3-(pyridin-2-ylmethylamino)maleonitrile (H2LH), 2-((E)-(5-bromo-2-hydroxybenzylidene)amino)-3-((pyridin-2-ylmethyl)amino)maleonitrile (H2LBr), and 2-((E)-2-hydroxy-5-nitrobenzylideneamino)-3-(pyridin-2-ylmethylamino)maleonitrile (H2LNO2). All the compounds were well characterized spectroscopically and structurally. The non-covalent interactions present in the lattice of Co-complexes were studied in detail to explain the molecular architecture using the Hirshfeld surface (HS) analysis. The catalytic activity of CO2 fixation towards epoxides under mild and solvent-free conditions was demonstrated. The synthesized complexes are catalysts that are well-active towards the CO2 activation under ambient conditions, whereas most of the reported catalysts require harsh conditions.

Bimetallic nickel complexes containing imidazole-based phenolate ligands as efficient catalysts for the copolymerization of carbon dioxide with epoxides

The utilization of hexadentate imidazole-derived diamine-bisphenolate ligands to construct structurally well-defined bimetallic nickel catalysts that enable the mediation of the copolymerization of carbon dioxide with alicyclic epoxides was reported for the first time. A series of dinickel carboxylate/nitrophenolate complexes were facilely prepared through a one-pot procedure and their structures were fully determined by single crystal X-ray structural analysis. Dinickel complexes 1-10 were used as single-component catalysts, and were evaluated for the copolymerization of CO2 and cyclohexene oxide (CHO), for which acetato-incorporated complex 1 was proved to exhibit the best activity. Not only has the controllability of binickel catalyst 1 for CO2/CHO copolymerization been demonstrated, but also an "immortal" character for the same polymerization has been realized. Furthermore, detailed kinetic studies of polymerization catalysis of this type were undertaken, and the kinetics results revealed a first-order dependence on both Ni complex 1 and CHO concentrations. This is a successful example of the introduction of the easily accessible nitrogen-heterocycle group, the imidazole moiety, into phenolate ligands for the development of high-performance homogeneous catalysts towards the bimetallic complex-catalyzed copolymerization of CO2 and epoxides.

Lead-Decorated Titanium Oxide Compound with a High Performance in Catalytic CO2 Insertion to Epoxides

The CO₂ cycloaddition to epoxides is an efficient method for CO₂ capture and storage, important not only for reducing greenhouse gas emission but also for producing cyclic carbonates, which are valuable industrial materials. In this study, we report a novel high-nuclearity titanium oxide cluster (TOC) inlayed with main-group element Pb²⁺, H₂Ti₁₆Pb₉O₂₄(SA)₁₈(DMF)₁₀(OH₂)₂ (denoted as 1; SA = salicylate; DMF = N,N-dimethylformamide), which has the property of visible-light absorption and has shown high catalytic activities for cycloadditions of CO₂ under visible-light irradiation. The cluster was synthesized in a high yield in a facial solvothermal process. Its structure and electronic structure were characterized by single-crystal X-ray diffraction, density functional theory calculations, and complementary techniques. The cycloaddition reactions were performed under solvent-free conditions. While the catalytic activity due to the Lewis acidity was moderate, visible-light irradiation further folded the reaction rates. The turnover number reached 3400 with a turnover frequency of 120 h^-1. Mechanism studies indicated a synergistic effect of the Lewis acidity and photogenerated charge carriers. The performance of 1 in reversible I₂ uptake was also investigated. This study demonstrates the high potential of heterometal-decorated TOCs in the cost-effective and efficient CO₂ cycloaddition reaction under mild conditions.

Biodegradable Carbon Dioxide-Derived Non-Viral Gene Vectors for Osteosarcoma Gene Therapy

Osteosarcoma often occurs in children and adolescents with high invasiveness and high mortality. Polo-like kinase 1 (PLK1) overexpressed in most tumors promotes cancer cell proliferation and transformation. PLK1 is considered as a therapeutic target for osteosarcoma. RNA interference-based therapies are employed to combat osteosarcoma through silencing PLK1 gene expression. However, the treatment results remain unsatisfactory due to the lack of a safe and efficient nonviral gene vector. To tackle this hurdle, biodegradable and CO₂ -derivative cationic poly(vinylcyclohexene carbonates) (CPCHCs) are used as gene vectors to perform a siPLK1 therapeutic strategy for osteosarcoma treatment. Of those CPCHCs, CPCHC60 demonstrates the most excellent performance in gene transfection efficiency, endo-lysosome escaping, biodegradability, and biosafety. With the treatment of CPCHCs/siRNA nanoparticles, the expression level of PLK1 gene in osteosarcoma cells is significantly down-regulated. Subsequently, cells are arrested in the G₂ /M phase and subsequently dead in the form of apoptosis, resulting in significant tumor regression both in vitro and in vivo. This study brings a new insight into the development of superior nonviral gene vectors for practical cancer treatment. Based on the results, the resulting nanoparticle-based gene drug formation is considered to have a highly successful chance in further translational nanomedicine applications.

Well-Defined and Highly Effective Nickel Catalysts Coordinated on Tridentate SNO Schiff-Base Derivatives for Alternating Copolymerization of Epoxides and Anhydrides

A series of Ni complexes supported by SNO Schiff-base derivatives were synthesized in this study. Complex synthesis and characterization data are reported herein. Treatment of the pro-ligands [L¹-H = 2-(((2-(methylthio)ethyl)imino)methyl)phenol, L²-H = 2,4-di-tert-butyl-6-(((2-(methylthio)ethyl)imino)methyl)phenol, L³-H = 2-(((2-(methylthio)ethyl)imino)methyl)-4,6-bis(2-phenylpropan-2-yl)phenol, L⁴-H = 4-bromo-2-(((2-(methylthio)ethyl)imino)methyl)phenol, and L⁵-H = 4-chloro-2-(((2-(methylthio)ethyl)imino)methyl)phenol] with Ni(OAc)₂·4H₂O in refluxing ethanol afforded six-coordinate mono-Ni(II) complexes [L₂ⁿNi] (n = 1-5). Noteworthy, a heptanuclear nickel(II) octacarboxylate species complex 6 and dinuclear nickel complex 6a resulted from treatment of L⁶-H [4-fluoro-2-(((2-(methylthio)ethyl)imino)methyl)phenol] with different metal precursors [Ni(OAc)₂·4H₂O for 6; NiBr₂ for 6a] giving a quantitative yield. The reaction of nickel acetate tetrahydrate and L⁷-H to L⁹-H [L⁷-H = 2-methoxy-6-(((2-(methylthio)ethyl)imino)methyl)phenol, L⁸-H = 5-methoxy-2-(((2-(methylthio)ethyl)imino)methyl)phenol, and L⁹-H = 4-methoxy-2-(((2-(methylthio)ethyl)imino)methyl)phenol] produced the four-coordinate complexes [L₂ⁿNi] (n = 7-9). The highest performing catalyst was complex 3, which was highly efficient for the ring-opening copolymerization of phthalic anhydride (PA) and cyclohexene oxide (CHO) in the presence of a cocatalyst (4-dimethylaminopyridine). In addition, the same copolymerization conditions produced narrowly dispersed polyesters, with high selectivity and polymerization control. In addition to PA-CHO copolymerization, efficient diglycolic anhydride-PA and PA-propene oxide copolymerization was achieved under the same conditions. These catalysts are straightforward to produce and extend the scope of potential substrates.

Dinuclear Nickel Complexes Using Hexadentate Benzothiazole-Based Diamine-Bisphenolate Ligands: Highly Active Catalysts for Copolymerization of Carbon Dioxide with Epoxides

We reported for the first time the utilization of hexadentate benzothiazole-based diamine-bisphenolate ligands to synthesize structurally well-characterized dinickel dicarboxylate complexes and studied their catalysis for copolymerization of carbon dioxide with epoxides. Dinickel carboxylate complexes having a 1,3-diamine-bridged backbone were demonstrated to be high-performance catalysts for alternating copolymerization of CO₂ and cyclohexene oxide (CHO) with high product selectivity. Particularly, acetate-supported nickel complex 2 enabled us to promote such CO₂-copolymerization of this kind with a maximum turnover frequency of up to 2600 h^-1 and gave good molecular weight controllability under high-pressure conditions. It is worth noting that bimetallic Ni catalyst 2 was also capable of mediating the catalytic CO₂-polymerization of alicyclic epoxides at atmospheric pressure. Kinetic investigations of CO₂/CHO copolymerization by 2 allowed us to determine the rate equation of -d[CHO]/dt = k_p[2]¹[CHO]¹, and such catalysis exhibited a first-order dependence on both dinickel complex and CHO concentrations.