Accessing Alkyl- and Alkenylcyclopentanes from Cr-Catalyzed Ethylene Oligomerization Using 2-Phosphinophosphinine Ligands

Manganese 2-phosphinophosphinine precatalysts for methanol/ethanol upgrading to isobutanol

Two Mn-phosphinophosphinine complexes were synthesised from reaction of the proligand with [MnBr(CO)5] at 80 °C for 2 h; 2-diphenylphosphino-3-methyl-6-trimethylsilylphosphinine manganese tricarbonyl bromide (2TMS) and 2-diphenylphosphino-3-methyl-phosphinine manganese tricarbonyl bromide (2H). 31P{1H} NMR spectroscopy revealed characteristic chemical shifts for the phosphinine and phosphine donors bound to Mn (255.4 and 23.7 ppm for 2TMS; 234.2 and 24.8 ppm for 2H), and single crystal X-ray diffraction established the structure of the chelating complex 2TMS. Rapid reaction of both complexes with water was observed with 2TMS reacting to eventually yield a single product, syn-3TMS, from the syn-1,2-addition of water across the PC multiple bond on the bromide face, confirmed by X-ray diffraction for both an unsolvated and solvated structure, where MeOH was found to be H-bonding to the P-OH functionality. The reaction of 2R with dry methanol gave multiple products that were not in equilibrium with each other, and the molecular structure of one isomer was definitively established by X-ray diffraction as an unusual 1,4-addition product (1,4-4TMS). However, reaction of 2R with methanol in the presence of trace water showed that hydrolysis products 3R were formed preferentially. Both phosphinine complexes acted as pre-catalysts for the Guerbet upgrading of methanol/ethanol to isobutanol at 180 °C over 90 h, giving yields of isobutanol (based on moles of ethanol) of 22% for 2TMS and 27% for 2H. This is superior to known Mn dppm complexes [dppm = bis(diphenylphosphino)methane], including the 21% yield recorded for the best derivative [MnBr(κ2-PPh2C(H)PhPPh2)(CO)3] shown to date.

Highly selective, reversible water activation by P,N-cooperativity in pyridyl-functionalized phosphinines

Tetrapyridyl-functionalized phosphinines were prepared and structurally characterized. The donor-functionalized aromatic phosphorus heterocycles react highly selectively and even reversibly with water. Calculations reveal P,N-cooperativity for this process, with the flanking pyridyl groups serving to kinetically enhance the formal oxidative addition process of H2O to the low-coordinate phosphorus atom via H-bonding. Subsequent tautomerization forms 1,2-dihydrophosphinine derivatives, which can be quantitatively converted back to the phosphinine by applying vacuum, even at room temperature. This process can be repeated numerous times, without any sign of decomposition of the phosphinine. In the presence of CuI·SMe2, dimeric species of the type ([Cu2I2(phosphinine)]2) are formed, in which each phosphorus atom shows the less common μ2-bridging 2e--lone-pair-donation to two Cu(i)-centres. Our results demonstrate that fully unsaturated phosphorus heterocycles, containing reactive P[double bond, length as m-dash]C double bonds, are interesting candidates for the activation of E-H bonds, while the aromaticity of such compounds plays an appreciable role in the reversibility of the reaction, supported by NICS calculations.

Chromium Ethylene Tri-/Tetramerization Catalysts Supported by Iminophosphine Ligands

A new class of highly active ethylene tri-/tetramerization chromium catalysts supported by iminophosphine ligands has been studied. The impact of electronic and steric changes of these ligands on selectivity and activity has been investigated by varying P- and/or N-substituents. Upon activation with MMAO, the ligand bearing a P-cyclohexyl group displayed a high activity of 307 kg/(g Cr/h) with a high trimerization selectivity of 92.6%. Decreasing the steric hindrance of N-aryl group led to a decrease in 1-hexene selectivity (74.5%), producing more 1-octene (10.3%). X-ray diffraction analysis verifies that the ligands coordinate with the chromium center in a κ2-P,N mode.

Phospholenes from Phosphabenzenes by Selective Ring Contraction

A 3-amino-functionalized phosphabenzene (phosphinine) has been synthesized and structurally characterized. The pyramidalized nitrogen atom of the dimethylamino substituent indicates only a weak interaction between the lone pair of the nitrogen atom and the aromatic phosphorus heterocycle, resulting in somewhat basic character. It turned out that the amino group can indeed be protonated by HCl. In contrast to pyridines, however, the phosphabenzene-ammonium salt undergoes a selective ring contraction to form a hydroxylphospholene oxide in the presence of additional water. Based on deuterium labeling experiments and quantum chemical calculations, a rational mechanism for this hitherto unknown conversion is proposed.

Digold Phosphinine Complexes Are Stable with a Bis(Phosphinine) Ligand but Not with a 2-Phosphinophosphinine

The reaction of [bis{3-methyl-6-(trimethylsilyl)phosphinine-2-yl}dimethylsilane] (19) with one and two equivalents of [AuCl(tht)] was attempted in order to selectively form the mono and digold species, respectively. The digold species [(AuCl)2(19)] (21) was synthesized in 32% yield and comprehensibly characterized (multinuclear NMR spectroscopy, elemental analysis, mass spectrometry and single-crystal X-ray diffraction). The monogold species showed no 31P nuclear magnetic resonance at 25 °C but two resonances at −70 °C due to rapid exchange of AuCl between the phosphinine donors at 25 °C and was also susceptible to redistribution reactions to form the digold species. Analogous reactions of [AuCl(tht)] with 2-diphenylphosphino-3-methyl-6-trimethylsilylphosphinine (22) revealed preferential coordination of the AuCl unit to the PPh2 donor first, with coordination to the phosphinine achieved upon reaction with the second equivalent of [AuCl(tht)]. Unexpectedly, the digold complex was not stable, undergoing decomposition to give an unidentified black precipitate. Structural information could only be obtained on the digold hydrolysis product [(AuCl)2(1-OH-2-PPh2-3-MePC5H4)], which showed an aurophilic interaction.

Reactivity Studies of Phosphinines: The Selenation of Diphenyl-Phosphine Substituents and Formation of a Chelating Bis(Phosphinine) Palladium(II) Complex

Phosphinines and donor-substituted phosphinines are of recent interest due to their use in homogeneous catalysis. In this article, a Pd(II) bis(phosphinine) complex was characterised and phosphorus–selenium coupling constants were used to assess the donor properties of the diphenylphosphine substituents of phosphinine ligands to promote their further use in catalysis. The selenation of 2,5-bis(diphenylphosphino)-3,6-dimethylphosphinine (5) and 2-diphenylphosphino-3-methyl-6-trimethylsilylphosphinine (6) gave the corresponding phosphine selenides 8 and 9, respectively, leaving the phosphinine ring intact. Multinuclear NMR spectroscopy, mass spectrometry and single crystal X-ray diffraction confirmed the oxidation of all the diphenylphosphine substituents with 1JP-Se coupling constants determined to be similar to SePPh3, indicating that the phosphinine rings were electronically similar to phenyl substituents. Solutions of 6 were found to react with oxygen slowly to produce the phosphine oxide 10 along with other by-products. The reaction of [bis{3-methyl-6-(trimethylsilyl)phosphinine-2-yl}dimethylsilane] (4) with [PdCl2(COD)] gave the chelating dichloropalladium(II) complex, as determined by multinuclear NMR spectroscopy, mass spectrometry and an elemental analysis. The molecular structure of the intermediate 2 in the formation of 4,6-di(tert-butyl)-1,3,2-diazaphosphinine (3) was also determined, which confirmed the structure of the diazaphosphacycle P(Cl){N=C(tBu)CH=C(tBu)-N(H)}.

A ruthenium cis-dihydride with 2-phosphinophosphinine ligands catalyses the acceptorless dehydrogenation of benzyl alcohol

The first ruthenium dihydride complex featuring a phosphinine ligand cis-[Ru(H)₂(2-PPh₂-3-Me-6-SiMe₃-PC₅H₂)₂] was synthesised exclusively as the cis-isomer. When formed in situ from the reaction of cis-[Ru(Cl)₂(2-PPh₂-3-Me-6-SiMe₃-PC₅H₂)₂] with two equivalents of Na[BHEt₃], as demonstrated by ³¹P and ¹H NMR spectroscopy, the catalysed acceptorless dehydrogenation of benzyl alcohol was observed leading to benzyl benzoate in up to 70% yield.

Coordination-induced polymerization of P═C bonds leads to regular (P─C) n polycarbophosphanes

The replacement of carbon in (C─C) n chains of polyolefins by phosphorus leads to polycarbophosphanes (P─C) n , which may possess unique chemical and physical properties. However, macromolecules with a regular (P─C) n chain have never been unambiguously identified. Here, we demonstrate that addition polymerization, a general concept to polymerize olefins, can be extended to P═C double bonds. The polymerization of monomeric 2-phosphanaphthalenes is mediated by copper(I) halides and leads to polycarbophosphanes with an M n of 14 to 34 kDa. Each phosphorus is coordinated to Cu(I), which can be easily removed. Unlike long-term durable polyolefins, the metal-free polymers depolymerize rapidly back to monomers under sunlight or ultraviolet irradiation at λ = 365 nm. The monomers can be recycled for repolymerization, demonstrating a cradle-to-cradle life cycle for polycarbophosphanes.

Replacement of the Common Chromium Source CrCl3(thf)3 with Well-Defined [CrCl2(μ-Cl)(thf)2]2

CrCl₃(thf)₃ is a common starting material in the synthesis of organometallic and coordination compounds of Cr. Deposited as an irregular solid with no possibility of recrystallization, it is not a purity guaranteed chemical, causing problems in some cases. In this work, we disclose a well-defined form of the THF adduct of CrCl₃ ([CrCl₂(μ-Cl)(thf)₂]₂), a crystalline solid, that enables structure determination by X-ray crystallography. The EA data and XRD pattern of the bulk agreed with the revealed structure. Moreover, its preparation procedure is facile: evacuation of CrCl₃·6H₂O at 100 °C, treatment with 6 equivalents of Me₃SiCl in a minimal amount of THF, and crystallization from CH₂Cl₂. The ethylene tetramerization catalyst [iPrN{P(C₆H₄-p-Si(nBu)₃)₂}₂CrCl₂]⁺[B(C₆F₅)₄]⁻ prepared using well-defined [CrCl₂(μ-Cl)(thf)₂]₂ as a starting material exhibited a reliably high activity (6600 kg/g-Cr/h; 1-octene selectivity at 40 °C, 75%), while that of the one prepared using the impure CrCl₃(thf)₃ was inconsistent and relatively low (~3000 kg/g-Cr/h). By using well-defined [CrCl₂(μ-Cl)(thf)₂]₂ as a Cr source, single crystals of [(CH₃CN)₄CrCl₂]⁺[B(C₆F₅)₄]⁻ and [{Et(Cl)Al(N(iPr)₂)₂}Cr(μ-Cl)]₂ were obtained, allowing structure determination by X-ray crystallography, which had been unsuccessful when the previously known CrCl₃(thf)₃ was used as the Cr source.

Building a Toolbox for the Analysis and Prediction of Ligand and Catalyst Effects in Organometallic Catalysis

Computers have become closely involved with most aspects of modern life, and these developments are tracked in the chemical sciences. Recent years have seen the integration of computing across chemical research, made possible by investment in equipment, software development, improved networking between researchers, and rapid growth in the application of predictive approaches to chemistry, but also a change of attitude rooted in the successes of computational chemistry-it is now entirely possible to complete research projects where computation and synthesis are cooperative and integrated, and work in synergy to achieve better insights and improved results. It remains our ambition to put computational prediction before experiment, and we have been working toward developing the key ingredients and workflows to achieve this.The ability to precisely tune selectivity along with high catalyst activity make organometallic catalysts using transition metal (TM) centers ideal for high-value-added transformations, and this can make them appealing for industrial applications. However, mechanistic variations of TM-catalyzed reactions across the vast chemical space of different catalysts and substrates are not fully explored, and such an exploration is not feasible with current resources. This can lead to complete synthetic failures when new substrates are used, but more commonly we see outcomes that require further optimization, such as incomplete conversion, insufficient selectivity, or the appearance of unwanted side products. These processes consume time and resources, but the insights and data generated are usually not tied to a broader predictive workflow where experiments test hypotheses quantitatively, reducing their impact.These failures suggest at least a partial deviation of the reaction pathway from that hypothesized, hinting at quite complex mechanistic manifolds for organometallic catalysts that are affected by the combination of input variables. Mechanistic deviation is most likely when challenging multifunctional substrates are being used, and the quest for so-called privileged catalysts is quickly replaced by a need to screen catalyst libraries until a new "best" match between the catalyst and substrate can be identified and the reaction conditions can be optimized. As a community we remain confined to broad interpretations of the substrate scope of new catalysts and focus on small changes based on idealized catalytic cycles rather than working toward a "big data" view of organometallic homogeneous catalysis with routine use of predictive models and transparent data sharing.Databases of DFT-calculated steric and electronic descriptors can be built for such catalysts, and we summarize here how these can be used in the mapping, interpretation, and prediction of catalyst properties and reactivities. Our motivation is to make these databases useful as tools for synthetic chemists so that they challenge and validate quantitative computational approaches. In this Account, we demonstrate their application to different aspects of catalyst design and discovery and their integration with computational mechanistic studies and thus describe the progress of our journey toward truly predictive models in homogeneous organometallic catalysis.

2-(Dimethylamino)phosphinine: A Phosphorus-Containing Aniline Derivative

The yet unknown 2-amino-substituted λ³ ,σ² -phosphinines are phosphorus-containing aniline derivatives. Calculations show that the strong interaction of the π-donating NR₂  group with the aromatic system results in a high π-density at the phosphorus atom. We could now synthesize 2-N(CH₃ )₂ -functionalized phosphinines, starting from a 3-N(CH₃ )₂ -substituted 2-pyrone and (CH₃ )₃ Si-C≡P. Their reaction with CuBr⋅S(CH₃ )₂ affords Cu^I  complexes with the first example of a neutral phosphinine acting as a rare bridging μ₂ -P-4e donor-ligand between two Cu^I  centers. Our experimental and theoretical investigations show that 2-aminophosphinines are missing links in the series of known 2-donor-functionalized phosphinines.

Mapping the properties of bidentate ligands with calculated descriptors (LKB-bid)

Ligand space for bidentates has been mapped, computationally, varying donors, substituents and backbones, to give a new database, LKB-bid.

Robust Chromium Precursors for Catalysis: Isolation and Structure of a Single-Component Ethylene Tetramerization Precatalyst

We have introduced a new class of stable organometallic Cr reagents (compounds 1-4) that are readily prepared, yet reactive enough to serve as precursors. They were used for ethylene tetramerization catalysis following stoichiometric activation by in situ protonation. This study highlights the importance of balancing stability with reactivity in generating an organometallic precursor that is useful in catalysis. Moreover, precursor 4 allowed for the isolation and crystallographic characterization of a room-temperature stable cationic species, (PNP)CrR₂⁺ (R = o-C₆H₄(CH₂)₂OMe, PNP = ⁱPrN(PPh₂)₂). This complex (5) may be used as a single component precatalyst, without any alkylaluminum reagents. This result provides an unprecedented level of insight into the kind of structures that must be produced from more complicated activation processes.

Computational Ligand Descriptors for Catalyst Design

Ligands, especially phosphines and carbenes, can play a key role in modifying and controlling homogeneous organometallic catalysts, and they often provide a convenient approach to fine-tuning the performance of known catalysts. The measurable outcomes of such catalyst modifications (yields, rates, selectivity) can be set into context by establishing their relationship to steric and electronic descriptors of ligand properties, and such models can guide the discovery, optimization, and design of catalysts. In this review we present a survey of calculated ligand descriptors, with a particular focus on homogeneous organometallic catalysis. A range of different approaches to calculating steric and electronic parameters are set out and compared, and we have collected descriptors for a range of representative ligand sets, including 30 monodentate phosphorus(III) donor ligands, 23 bidentate P,P-donor ligands, and 30 carbenes, with a view to providing a useful resource for analysis to practitioners. In addition, several case studies of applications of such descriptors, covering both maps and models, have been reviewed, illustrating how descriptor-led studies of catalysis can inform experiments and highlighting good practice for model comparison and evaluation.

Chromium complexes supported by the bidentate PN ligands: synthesis, characterization and application for ethylene polymerization

Chromium-based complexes are among the most important catalysts in the field of ethylene polymerization and oligomerization. Heterogeneous Cr Phillips catalysts account for more than one-third of the commercialized high density polyethylene (HDPE). In this contribution, chromium complexes, LCrCl3 (Cr1-Cr4: L = 2,6-R1-4-R2-C6H2-N[double bond, length as m-dash]CH-C6H4-2-PPh2; Cr1: R1 = H, R2 = H; Cr2: R1 = Me, R2 = H; Cr3: R1 = iPr, R2 = H; Cr4: R1 = Ph2CH, R2 = iPr), have been synthesized and characterized by elemental analysis, ESI and IR spectroscopy. The molecular structures of Cr3 and Cr4 are defined by X-ray diffraction, revealing a distorted octahedral geometry around the chromium center in both structures. In the presence of an aluminum cocatalyst, complexes Cr1-Cr4 show moderate to high activities toward ethylene polymerization. The nature of the catalysts and various reaction conditions, such as the nature and the amount of cocatalyst, reaction time and temperature, are investigated in detail. The results show that the title complexes have good thermal stability and the substituents on the ligands significantly affect the catalytic properties. Particularly, complex Cr4 can produce HDPE with a high molecular weight up to 68.3 × 104 g mol-1 due to the suppression of the chain transfer/termination by the introduction of bulky Ph2CH groups.

Two isomers of a bis(diphenylphosphino)phosphinine, and the synthesis and reactivity of Ru arene/Cp* phosphinophosphinine complexes

Two isomers of a bis(diphenylphosphino)phosphinine have been synthesised, and the Ru coordination chemistry of a 2-phosphinophosphinine extended to include reactions of H₂O across a PC double bond.

Small bite-angle 2-phosphinophosphinine ligands enable rhodium-catalysed hydroboration of carbonyls

2-Phosphinophosphinine ligands generate Rh catalysts for the hydroboration of ketones and imines in contrast to standard phosphine ligands.