Competitive Selection of Conformation Chirality of Water-Soluble Pillar[5]arene Induced by Amino Acid Derivatives

Diastereoselective Polypseudorotaxane Formation with Planar Chiral Pillar[5]arenes via Co-crystallization Processes

As the number of chiral ring molecules in chiral polyrotaxane increases, the number of possible stereoisomers exponentially increases. Consequently, the selective synthesis of a specific stereoisomer becomes much more challenging. To address this problem, we co-crystallized poly(ethylene glycol) and a diastereomeric ring molecule, pillar[5]arene, in the solid state. The co-crystallization formed polypseudorotaxanes with a high diastereomeric excess (ca. 88 % de), meaning that polypseudorotaxanes containing (S, pS) stereoisomer pillar[5]arene rings were synthesized selectively. By contrast, in solution and evaporation systems, the selectivity remained low (ca. 10 % de). The results suggested that the packing effect by the co-crystallization contributed to the denser assembly of ring molecules on the polymeric chain, resulting in the diastereoselective formation. High diastereoselectivity was also observed even in higher-molecular-weight poly(ethylene glycol)s. These selectivities arose from the cooperative effects of the ring molecules on the polymeric chain, which were supported by calculating the stabilization energy.

Synthesis of Novel Planar-Chiral Charge-Compensated nido-Carborane-Based Amino Acid

Amino acids with unusual types of chirality and their derivatives have recently attracted attention as precursors in the synthesis of chiral catalysts and peptide analogues with unique properties. In this study, we have synthesized a new nido-carborane-based planar-chiral amino acid, in the molecule of which the amino group is directly bonded to the B(3) atom, and the carboxyl group is attached to the B(9) atom through the CH2S+(Me) fragment. 3-Amino-9-dimethylsulfonio-nido-carborane, prepared in three steps from 3-amino-closo-carborane in a high yield, was a key intermediate in the synthesis of the target planar-chiral amino acid. The carboxymethyl group at the sulfur atom was introduced by the demethylation reaction of the dimethylsulfonio derivative, followed by S-alkylation. The structure of new 3,9-disubstituted nido-carboranes was studied for the first time using NMR spectroscopy. The resonances of all boron atoms in the 11B NMR spectrum of 3-amino-9-dimethylsulfonio-nido-carborane were assigned based on the 2D NMR correlation experiments. The nido-carborane-based planar-chiral amino acid and related compounds are of interest as a basis for peptide-like compounds and chiral ligands.

Tröger's Base-Embedded Pillararenes─Macrocycles with Both Fixed and Conformational Chirality

Tröger's base-embedded pillararenes (P[1]TB[3]A), which combine Tröger's base (TB) with dialkoxybenzene units, were prepared via a fragment-coupling macrocyclization strategy. The TB unit in macrocycle P[1]TB[3]A provides a fixed chiral source, while 1,4-alkoxybenzene segments flip quickly to change their arrangement, which could provide reversible conformational chirality for those macrocycles. This rare example of macrocycles holding both fixed and conformational chirality lays a good foundation for expanding pillararenes using the fixed chiral source.

Separation of cyclohexanol from cyclohexanol/cyclohexene mixtures by crystals of pillar[6]arene containing three benzoquinone units

Here, we develop a new absorbent for efficient separation of cyclohexanol (CHA-ol) and cyclohexene (CHA-ene) by using crystals of pillar[6]arene with three benzoquinone units (P3QA). P3QA crystals are found to show remarkable selectivity for CHA-ol in 50 : 50 (v/v) CHA-ol : CHA-ene mixtures with a purity of 95.2%, along with vapochromic behavior.

Chirality Sensing of Cryptochiral Guests with Prism[n]arenes

Optical chirality sensing has gained significant attention in recent years. Within this field, the quest for stereodynamic chiroptical probes capable of detecting cryptochiral guests presents a formidable challenge. Macrocycles exhibiting planar chirality have emerged as promising candidates for amplifying the chirality of cryptochiral guests. In this study, we demonstrate that the formation of host-guest complexes between cryptochiral molecules and planar chiral prismarenes triggers electronic circular dichroism (ECD) signals via host-guest complexation-induced chirality amplification. The absolute configuration of the most stable chiral macrocyclic host-guest complex has been established by resorting to both exciton model and DFT computations. Furthermore, we demonstrated that this supramolecular chirality sensing system can be employed to determine the enantiomeric composition of scalemic mixtures by measuring the ECD bands intensity. The information described here opens the way for the use of prismarenes as stereodynamic probes for sensing of cryptochiral guests.

Circular Dichroism Sensing: Strategies and Applications

The analysis of the absolute configuration, enantiomeric composition, and concentration of chiral compounds are frequently encountered tasks across the chemical and health sciences. Chiroptical sensing methods can streamline this work and allow high-throughput screening with remarkable reduction of operational time and cost. During the last few years, significant methodological advances with innovative chirality sensing systems, the use of computer-generated calibration curves, machine learning assistance, and chemometric data processing, to name a few, have emerged and are now matched with commercially available multi-well plate CD readers. These developments have reframed the chirality sensing space and provide new opportunities that are of interest to a large group of chemists. This review will discuss chirality sensing strategies and applications with representative small-molecule CD sensors. Emphasis will be given to important milestones and recent advances that accelerate chiral compound analysis by outperforming traditional methods, conquer new directions, and pioneering efforts that lie at the forefront of chiroptical high-throughput screening developments. The goal is to provide the reader with a thorough understanding of the current state and a perspective of future directions of this rapidly emerging field.

Regulation of Fluorescence and Self-assembly of a Salicylaldehyde Azine-Containing Amphiphile by Pillararene

Regulation of fluorescence and self-assembly of a salicylaldehyde azine-containing amphiphile by a water-soluble pillar[5]arene via host-guest recognition in water was realized. The fluorescence and the self-assembled aggregates of the bola-type amphiphile G can be tailored by adding different amounts of water-soluble pillar[5]arene (WP5). In addition, the emission property and self-assembly behavior of G and WP5 are responsive to pH conditions. Furthermore, the fluorescence emission property of G and the regulation by WP5 or pH conditions was applied as information encryption material, rewritable paper, and erasable ink. We believe that this fluorescence regulation strategy is promising for the construction of advanced fluorescent organic materials.

Chirality Induction and Memory of Pillar[4]arene[1]quinone Derivatives in Visible-Light Range

Pillar[4]arene[1]quinone derivatives (PQXs) were synthesized by the oxidation of pillar[5]arenes, which exhibited notable charge transfer (CT) transitions at approximately 485 nm. Successful chiral resolution of two pairs of enantiomeric conformers was achieved. Despite reduced binding affinity, PQXs demonstrated slower racemization kinetics. Visible-light chiroptical induction with a significant dissymmetry factor was attained by complexing PQXs with a chiral guest. The induced enantiomeric excess could be maintained through competitive binding with an achiral guest, offering a promising strategy for chiral sensing and memory.

Synergistically Boosting the Circularly Polarized Luminescence of Functionalized Pillar[5]arenes by Polymerization and Aggregation

Supramolecular polymers based on chiral macrocycles have attracted increasing attention in the field of circularly polarized luminescence (CPL) owing to their unique properties. However, the construction of macrocyclic supramolecular polymers with highly efficient CPL properties in aggregate states still remains challenging. Herein, w e constructed a class of macrocycle-based coordination polymers by combining the planar chiral properties of pillar[5]arene with the excellent fluorescence properties of aggregation-induced emission luminogens. The formation of polymers enhances both the fluorescence and chiral properties, resulting in chiral supramolecular polymers with remarkable CPL properties. Increasing the aggregation degree of the polymers can further improve their CPL properties, as evidenced by a 21-fold increase in the dissymmetry factor and an over 25-fold increase in the fluorescence quantum yield in the aggregate state compared to the solution state. Such a synergistic effect of polymerization- and aggregation-enhanced CPL can be explained by the restriction of intramolecular motions and aggregation-induced conformation confinement. This work provides a promising method for developing highly efficient CPL supramolecular polymers.

Alignment and Dynamic Inversion of Planar Chirality in Pillar[n]arenes

Pillar[n]arenes are symmetrical macrocyclic compounds composed of benzene panels with para-methylene linkages. Each panel usually exhibits planar chirality and prefers chirality-aligned states. Because of this feature, pillar[n]arenes are attractive scaffolds for chiroptical materials that are easy to prepare and optically resolve and show intense circular dichroism (CD) signals. In addition, rotation of the panels endows the chirality of pillar[n]arenes with a dynamic nature. The chirality in tubular oligomers and supramolecular assemblies sometimes show time- and procedure-dependent alignment phenomena. Furthermore, the CD signals of some pillar[n]arenes respond to the addition of chiral guests when their dynamic chirality is coupled with host-guest properties. By using diastereomeric pillar[n]arenes with additional chiral structures, the response can also be caused by achiral guests and changes of the environment, providing molecular sensors.

Chiroptical Recognition of Carboxylates with Charge-Neutral Double-Stranded Zinc(II) Helicates

Chirality analysis of small molecules for the determination of their enantiopurity is nowadays ruled by streamlined chromatographic methods which utilize chiral stationary phases. Chiroptical probes which rely on host-guest interactions are so far overshadowed by the latter but have the benefit of depending only on common spectroscopic techniques such as CD spectroscopy to distinguish enantiomers and to quantify their ratio. Interest into this receptor-based approach is constantly rising because non-invasive high-throughput screenings with a minimal waste production can be performed. In this study we investigate the possibility to utilize metal-based containers in form of charge-neutral helicates able to recognize anions for this purpose. Key building block of the helicates are triazole units which show rotational freedom and give rise to either a meso-structure or a racemic mixture of the right- and left-handed complex. A chiroptical response of the probe is observed upon recognition of chiral mono- or dicarboxylates and chirality analysis of tartrate is conducted by CD spectroscopy.

Chiroptical regulation of macrocyclic arenes with flipping-induced inversion of planar chirality

Studies on various macrocyclic arenes have received increasing attention due to their straightforward syntheses, convenient derivatization, and unique complexation properties. Represented by pillar[n]arenes, several distinctive macrocyclic arenes have recently emerged with the following characteristics: they possess a pair of enantiomeric planar chiral conformations, and interconversion between these enantiomeric conformations can be achieved through the flipping of ring units. Complexation of a chiral guest with these macrocyclic arenes will lead to a shift of the equilibrium between the Rp and Sp conformers, leading to intriguing possibilities for chiral induction and sensing. By the introduction of bulky substituents on the rims, employing rotaxanation or pseudocatenation, planar chirality could be locked, enabling the enantiomeric separation of the chiral structures. The induced or separated chiral conformers/compounds exhibit significant chiroptical properties. These macrocyclic arenes, with flipping-induced inversion of planar chirality, demonstrated intriguing chiral induction dynamics and kinetics. In this featured review, we systematically summarize the progress in chiroptical induction/regulation of these macrocyclic arenes, particularly in the fields of chiral sensing, molecular machines, molecular recognition, and assembly.

Efficient separation of monobromotoluene isomers by nonporous adaptive perbromoethylated pillar[5]arene crystals

Herein we report an efficient adsorptive separation approach for monobromotoluene isomers using nonporous adaptive crystals of perbromoethylated pillar[5]arene (BrP5). The purity of separated m-bromotoluene from an equal volume mixture of m-bromotoluene and o-bromotoluene reaches 96.6% in one cycle and the adsorbent BrP5 can be reused without losing separation performance.

Diastereoselective Rotaxane Synthesis with Pillar[5]arenes via Co-crystallization and Solid-State Mechanochemical Processes

Chiral rotaxanes have attracted much attention in recent decades for their unique chirality based on their interlocked structures. Thus, selective synthesis methods of chiral rotaxanes have been developed. The introduction of substituents with chiral centers to produce diastereomers is a powerful strategy for the construction of chiral rotaxanes. However, in case of a small energy difference between the diastereomers, diastereoselective synthesis is extremely difficult. Herein, we report a new diastereoselective rotaxane synthesis method using solid-phase diastereoselective [3]pseudorotaxane formation and mechanochemical solid-phase end-capping reactions of the [3]pseudorotaxanes. By co-crystallization of stereodynamic planar chiral pillar[5]arene with stereogenic carbons at both rims and axles with suitable end groups and lengths, the [3]pseudorotaxane with a high diastereomeric excess (ca. 92% de) was generated in the solid state because of higher effective molarity with aid by packing effects and significant energy differences between [3]pseudorotaxane diastereomers. In contrast, the de of the pillar[5]arene was low in solution (ca. 10% de) because of a small energy difference between diastereomers. Subsequent end-capping reactions of the polycrystalline [3]pseudorotaxane with high de in solvent-free conditions successfully yielded rotaxanes while maintaining the high de generated by the co-crystallization.

Planar Chirality for Acid/Base Responsive Macrocyclic Pillararenes Induced by Amino Acid Derivatives: Molecular Dynamics Simulations and Machine Learning

Chirality is ubiquitous in nature, ranging from a DNA helix to a biological macromolecule, snail's shell, and even a galaxy. However, the precise control of chirality at the nanoscale is a challenge due to the structure complexity of supramolecular assemblies, the small energy differences between different enantiomers, and the difficulty in obtaining polymorphic crystals. The planar chirality of water-soluble pillar[5]arenes (called WP5-Na with Na ions in the side chain) host triggered by the addition of chiral L-amino acid hydrochloride (L-AA-OEt) guests and acid/base is rationalized by the relative stability of different chiral isomers, being estimated by molecular dynamics (MD) simulations and quantum chemical calculations. As an increase in the pH value, the change from a positive to a negative value of the free energy difference (ΔG) between two conformations, pR-WP5-Na⊃L-AA-OEt and pS-WP5-Na⊃L-AA-OEt, suggests an inversed preference of the pS-WP5-Na conformer induced by the deprotonated L-arginine ethyl ester (L-Arg-OEt) at pH = 14, which is supported by the circular dichroism (CD) experiments. On the basis of 2256 WP5-Na⊃L-Ala-OEt and 3299 WP5-Na⊃L-Arg-OEt conformers sampled from MD, the gradient boosting regression (GBR) model exhibits a satisfactory performance (R² = 0.91) in predicting the chirality of WP5-Na complexations using host-guest binding descriptors, including the geometry matching and binding sites and modes (electrostatics and hydrogen bonding). The machine learning model also performs well on external tests of different hosts (using different side chains and cavity sizes) with the addition of 22 other different guests, with the average chirality prediction accuracy of ML versus experimental CD determinations of 92.8%. The easily accessible host-guest features, binding position coordination and size matching between the cavity and guest, exhibit a close correlation to the chirality of different macrocyclic molecules, water-soluble pillar[6]arenes (WP6) versus WP5, in complexation with different amino acid guests. The exploration of efficient host-guest features in ML displays the great potential of building a large space of various assembled systems and accelerating the on-demand design of chiral supramolecular systems at the nanoscale.

Adaptive Planar Chirality of Pillar[5]arenes Invertible by n-Alkane Lengths

Chirality of host molecules can be induced and/or inverted by the guest molecules. However, the adapting chirality of hosts to the length of n-alkanes remains a great challenge because n-alkanes are neutral, achiral, and linear molecules, resulting in a weak interaction with most compounds. Herein, we report a system with chirality adapted to n-alkane lengths, using a pillar[5]arene-based macrocyclic host, S-Br, which contains five stereogenic carbons and five terminal bromine atoms on each rim. The electron-rich cavity of S-Br could include n-alkanes and the planar-chiral isomers sensitively inverted in response to the lengths of the complexed n-alkanes. The inclusion of a short n-alkane such as n-pentane made S-Br more inclined to be in the pS-form, whereas the inclusion of long n-alkanes such as n-heptane made the pR-form more favorable. The difference in the stability of the isomers was supported by the crystal structures and the theoretical calculations. Furthermore, temperature drives the adaptive chirality of S-Br with n-alkanes. An n-alkane with middle length, n-hexane, showed the dominance of the pR-form of S-Br at a higher temperature, whereas the pS-form was shown at a lower temperature.

Cation controlled rotation in anionic pillar[5]arenes and its application for fluorescence switch

Controlling molecular motion is one of hot topics in the field of chemistry. Molecular rotors have wide applications in building nanomachines and functional materials, due to their controllable rotations. Hence, the development of novel rotor systems, controlled by external stimuli, is desirable. Pillar[n]arenes, a class of macrocycles, have a unique planar chirality, in which two stable conformational isomers pR and pS would interconvert by oxygen-through-the-annulus rotations of their hydroquinone rings. We observe the differential kinetic traits of planar chirality transformation in sodium carboxylate pillar[5]arene (WP5-Na) and ammonium carboxylate pillar[5]arene (WP5-NH₄), which inspire us to construct a promising rotary platform in anionic pillar[5]arenes (WP5) skeletons. Herein, we demonstrate the non-negligible effect of counter cations on rotational barriers of hydroquinone rings in WP5, which enables a cation grease/brake rotor system. Applications of this tunable rotor system as fluorescence switch and anti-counterfeiting ink are further explored.

Chiroptical induction with prism[5]arene alkoxy-homologs

The complexation of prism[5]arenes with amino acid derivatives showed association constants of up to 10⁷ M^-1, significant CD with g_abs of up to 0.8 × 10^-2 and CPL with g_lum of 2 × 10^-3. The absolute configuration-CD signal correlation was established. The CD spectra varied significantly with the substituents on the prism[5]arenes.

Circular Dichroism Based Chirality Sensing with Supramolecular Host-Guest Chemistry

Optical methods are promising to address the ever-increasing demands for chirality analysis in drug discovery and related fields because they are amenable to high-throughput screening. Circular dichroism-based chiroptical sensing using host-guest chemistry is especially appealing due to the fast equilibrium kinetics, wide substrate scope, and potential for sustainable development. In this Minireview, we give an overview on this emerging field. General aspects of molecular recognition and chirality transfer are analyzed. Chirality sensors are discussed by dividing them into three classes according to their structural features. Applications of these chirality sensors for chirality analysis of the products of asymmetric reactions and for the real-time monitoring of reaction kinetics are demonstrated with selected examples. Moreover, challenges and research directions in this field are also highlighted.

The More the Slower: Self-Inhibition in Supramolecular Chirality Induction, Memory, Erasure, and Reversion

Self-inhibition has been observed widely in hierarchical biochemical processes but has yet to be demonstrated in pure molecular physical rather than chemical or biological processes. Herein, we report an unprecedented example of self-inhibition during the supramolecular chirality induction, memory, erasure, and inversion processes of pillar[5]arene (P[5]) derivatives. The addition of chiral alanine ethyl ester to bulky substituent-modified P[5]s led to time-dependent chirality induction due to the shift in the equilibrium of the S_P and R_P conformers P[5]. Intriguingly, more chiral inducers led to more intensive final chiroptical properties but lower chiral induction rates. Thus, the chiral inducer plays the role of both activator and inhibitor. Such self-inhibition essentially arises from kinetics manipulation of three tandem equilibria. Moreover, the chiroptical properties could be memorized by replacing the chiral inducer with an achiral competitive binder, and the chiroptical signal could be erased and reversed by an antipodal chiral inducer, which also showed the self-inhibition property.

CPL on/off control of an assembled system by water soluble macrocyclic chiral sources with planar chirality

Herein, we report the synthesis and planar chiral properties of a pair of water-soluble cationic pillar[5]arenes with stereogenic carbons. Interestingly, although units of the molecules were rotatable, only one planar chiral diastereomer existed in water in both cases. As a new type of chiral source, these molecules transmitted chiral information from the planar chiral cavities to the assembly of a water-soluble extended π-conjugated compound, affording circularly polarized luminescence (CPL). The chirality transfer process and resulting CPL were extremely sensitive to the feed ratio of the chiral pillar[5]arenes owing to the combined action of their planar chirality, bulkiness, and strong binding properties. When a limited amount of chiral source was added, further assembly of the extended π-conjugated compound into helical fibers with CPL was triggered. Unexpectedly, larger amounts of chiral source destroyed the helical fiber assemblies, resulting in elimination of the chirality and CPL properties from the assembled structures.

Readily obtained pillar[5]arenes with pure planar chirality enabled CPL on/off control of an assembled system by varying the feed ratio.

The Preparation of a Water-Soluble Phospholate-Based Macrocycle for Constructing Artificial Light-Harvesting Systems

On the basis of cyclotrixylohydroquinoylene (CTX), a novel water-soluble phospholate-based CTX derivative (WPCTX) was prepared with facile synthetic procedure and satisfying yield. Several model guest molecules were selected to investigate WPCTX's host-guest properties. Based on the study of the host and model guest complexation, a tetraphenylethylene derivative from model guest was employed as a guest molecule (G) to form WPCTX⊃G nanoparticles (NPs) with WPCTX through further supramolecular self-assembly in water. Moreover, a hydrophobic fluorescent dye, Eosin Y(ESY) or Nile red (NiR), was encapsulated in WPCTX⊃G NPs to construct two types of artificial light-harvesting systems. Their high antenna effect demonstrated such NPs successfully mimicked light-harvesting systems in nature.

Computational and data driven molecular material design assisted by low scaling quantum mechanics calculations and machine learning

Electronic structure methods based on quantum mechanics (QM) are widely employed in the computational predictions of the molecular properties and optoelectronic properties of molecular materials. The computational costs of these QM methods, ranging from density functional theory (DFT) or time-dependent DFT (TDDFT) to wave-function theory (WFT), usually increase sharply with the system size, causing the curse of dimensionality and hindering the QM calculations for large sized systems such as long polymer oligomers and complex molecular aggregates. In such cases, in recent years low scaling QM methods and machine learning (ML) techniques have been adopted to reduce the computational costs and thus assist computational and data driven molecular material design. In this review, we illustrated low scaling ground-state and excited-state QM approaches and their applications to long oligomers, self-assembled supramolecular complexes, stimuli-responsive materials, mechanically interlocked molecules, and excited state processes in molecular aggregates. Variable electrostatic parameters were also introduced in the modified force fields with the polarization model. On the basis of QM computational or experimental datasets, several ML algorithms, including explainable models, deep learning, and on-line learning methods, have been employed to predict the molecular energies, forces, electronic structure properties, and optical or electrical properties of materials. It can be conceived that low scaling algorithms with periodic boundary conditions are expected to be further applicable to functional materials, perhaps in combination with machine learning to fast predict the lattice energy, crystal structures, and spectroscopic properties of periodic functional materials.

Water-soluble pillar[5]arene sulfo-derivatives self-assemble into biocompatible nanosystems to stabilize therapeutic proteins

Pillar[5]arenes containing sulfonate fragments have been shown to form supramolecular complexes with therapeutic proteins to facilitate targeted transport with an increased duration of action and enhanced bioavailability. Regioselective synthesis was used to obtain a water-soluble pillar[5]arene containing the fluorescent label FITC and nine sulfoethoxy fragments. The pillar[5]arene formed complexes with the therapeutic proteins binase, bleomycin, and lysozyme in a 1:2 ratio as demonstrated by UV-vis and fluorescence spectroscopy. The formation of stable spherical nanosized macrocycle/binase complexes with an average particle size of 200 nm was established by dynamic light scattering and transmission electron microscopy. Flow cytometry demonstrated the ability of macrocycle/binase complexes to penetrate into tumor cells where they exhibited significant cytotoxicity towards A549 cells at 10^-5-10^-6 M while maintaining the enzymatic activity of binase.

Redox-Driven Chiral Inversion of Water-Soluble Pillar[5]arene with l-Cystine Derivative in the Aqueous Medium

In the aqueous solution, l-CySS-OMe induced pS-WP5 from racemic WP5. Upon the addition of dithiothreitol as a reducing reagent to the above system, pS-WP5 was then converted to pR-WP5 for the reason that l-CySS-OMe was reduced to l-Cys-OMe. Followed by the addition of H₂O₂ as an oxidation reagent, pR-WP5 was converted back to pS-WP5. The chiral conformational transferring process between pR-WP5 and pS-WP5 can be easily and visually observed by reading the CD signal.

Advances in Chirality Sensing with Macrocyclic Molecules

The construction of chemical sensors that can distinguish molecular chirality has attracted increasing attention in recent years due to the significance of chiral organic molecules and the importance of detecting their absolute configuration and chiroptical purity. The supramolecular chirality sensing strategy has shown promising potential due to its advantages of high throughput, sensitivity, and fast chirality detection. This review focuses on chirality sensors based on macrocyclic compounds. Macrocyclic chirality sensors usually have inherent complexing ability towards certain chiral guests, which combined with the signal output components, could offer many unique advantages/properties compared to traditional chiral sensors. Chirality sensing based on macrocyclic sensors has shown rapid progress in recent years. This review summarizes recent advances in chirality sensing based on both achiral and chiral macrocyclic compounds, especially newly emerged macrocyclic molecules.

Pillararenes: fascinating planar chiral macrocyclic arenes

Chiral macrocycles possess significant value in chiral science and supramolecular chemistry. Pillararenes, as a class of relatively young supramolecular macrocyclic hosts, have been widely used for host-guest recognition and self-assembly. Since the position of substituents on the benzene rings breaks the molecular symmetry (symmetric plane and symmetric center), pillararenes possess planar chirality. However, it is a great challenge to synthesize stable and resolvable enantiomers because of the easy rotation of the phenylene group. In this review, we summarize the construction methods of resolvable chiral pillararenes. We also focus on their applications in enantioselective recognition, chiral switches, chirality sensing, asymmetric catalysis, circularly polarized luminescence, metal-organic frameworks, and highly permeable membranes. Finally, we discuss the future research perspectives in this field of pillararene-based planar chiral materials. We hope that this review will encourage more researchers to work in this exciting field.

Spontaneous and induced chiral symmetry breaking of stereolabile pillar[5]arene derivatives upon crystallisation

Stereolabile pillar[5]arene (P[5]) derivatives, which are dynamic racemic mixtures in solution on account of their low inversion barriers, were employed as platforms to study chiral symmetry breaking during crystallisation. In the solid state, we showed that crystal enantiomeric excess of a conglomerate-forming P[5] derivative can be obtained by handpicking and Viedma ripening without the intervention of external chiral entities. On the other hand, in the presence of ethyl d/l-lactate as both optically-active solvents and chiral guests, the handedness of P[5] derivative crystals, either forming racemic compounds or conglomerates upon condensation, can be directed and subsequently inverted in a highly controllable manner.

Stereolabile pillar[5]arene derivatives, which are dynamic racemic mixtures in solution on account of their low inversion barriers, were employed as platforms to study chiral symmetry breaking during crystallisation.

Multilevel Chirality Transfer from Amino Acid Derivatives to Circularly Polarized Luminescence-Active Nanoparticles in Aqueous Medium

Chirality at different levels is widely observed in nature, but the clue to connect it all together, and the way chirality transfers among different levels are still obscure. Herein, a l-/d-lysine-based self-assembly system was constructed, in which two-step chirality transfer among three different levels was observed in aqueous solution. The chirality originated from the point chirality of amino acid derivatives l-/d-PyLys hydrochloride, and was transferred to the planar conformational chirality of water-soluble pillar[5]arene pR-/pS-WP5. Then, with the aid of pR-/pS-WP5, nanoparticles were formed that exhibited L-/R-handed circularly polarized luminescence with a dissymmetry factor of up to ±0.001, arising from pyrene chiral excimers. This multilevel chirality transfer not only provides a perspective to trace potential clues, and to pursue certain ways by which the chirality transfers, but also offers a strategy to create controllable CPL emission in aqueous media.

Saucer[n]arenes: Synthesis, Structure, Complexation, and Guest-Induced Circularly Polarized Luminescence Property

Macrocycles denoted as saucer[n]arenes (n=4,5) were easily synthesized by the one-pot condensation of 2,7-dimethoxynaphthalene (2,7-DMN) and paraformaldehyde in the presence of TFA or catalytic BF₃ ⋅OEt₂ . With 1,1-dimethylpiperidin-1-ium as the template, saucer[4]arene was selectively obtained. Crystal structures show that saucer[n]arenes are all composed of 2,7-DMN moiety bridged by the methylene groups at 1,6-positions: all of the 7-methoxy groups lie on one face, and all of the 2-methoxy groups lie on the other. Saucer[n]arenes exhibit strong fluorescence properties with the quantum yields of 19.6 % and 23.4 %. They form 1:1 complexes with ammonium salts in both solution and solid state (association constant up to 10⁵  M^-1 in CDCl₃ ). Chiral quaternary ammonium salts can induce the chirality of the dynamically racemic inherently chiral saucer[n]arenes in solution, and thus show mirror-imaged circular dichroism signals and circularly polarized luminescence (CPL) properties.

Solvent-Driven Chirality Switching of a Pillar[4]arene[1]quinone Having a Chiral Amine-Substituted Quinone Subunit

Several new chiral pillar[4]arene[1]quinone derivatives were synthesized by reacting pillar[4]arene[1]quinone (EtP4Q1), containing four 1,4-diethoxybenzene units and one benzoquinone unit, with various chiral amines via Michael addition. Due to the direct introduction of chiral substituents on the rim of pillar[n]arene and the close location of the chiral center to the rim of EtP4Q1, the newly prepared compounds showed unique chiroptical properties without complicated chiral resolution processes, and unprecedented high anisotropy factor of up to −0.018 at the charge transfer absorption band was observed. Intriguingly, the benzene sidearm attached pillar[4]arene[1]quinone derivative 1a showed solvent- and complexation-driven chirality inversion. This work provides a promising potential for absolute asymmetric synthesis of pillararene-based derivatives.

Chiroptical Sensing of Amino Acid Derivatives by Host-Guest Complexation with Cyclo[6]aramide

A hydrogen-bonded (H-bonded) amide macrocycle was found to serve as an effective component in the host–guest assembly for a supramolecular chirality transfer process. Circular dichroism (CD) spectroscopy studies showed that the near-planar macrocycle could produce a CD response when combined with three of the twelve L-α-amino acid esters (all cryptochiral molecules) tested as possible guests. The host–guest complexation between the macrocycle and cationic guests was explored using NMR, revealing the presence of a strong affinity involving the multi-point recognition of guests. This was further corroborated by density functional theory (DFT) calculations. The present work proposes a new strategy for amplifying the CD signals of cryptochiral molecules by means of H-bonded macrocycle-based host–guest association, and is expected to be useful in designing supramolecular chiroptical sensing materials.

Electrochemiluminescent Chiral Discrimination with a Pillar[5]arene Molecular Universal Joint-Coordinated Ruthenium Complex

A bicyclic pillar[5]arene derivative fused with a bipyridine side ring, a so-called molecular universal joint (MUJ), was synthesized, and the pair of enantiomers was resolved by high-performance liquid chromatography enantioresolution. The electrochemiluminescent detection based on the ruthenium complex of the enantiopure MUJ showed excellent chiral discrimination toward certain amino acids.

Selective recognition of tryptophan by a methylpillar[5]arene-based supramolecular fuorescent probe

Herein we present a simple fluorescence quenching method to selectively recognise and determine L-tryptophan (L-Trp) out of other 19 natural amino acids. Methylpillar[5]arene (MeP5), which is employed as a macrocyclic fluorescent probe, exhibits fluorescence activity in the solution of poor solvents because of aggregation-induced emission (AIE) effect. Fluorescence quenching of MeP5 in the solution of EtOH/CH₂Cl₂ (98/2, v/v) was observed upon the addition of L-Trp whereas other 19 natural amino acids did not bring about obvious change in fluorescence intensity. ¹H NMR titration, fluorescence spectroscopy, mass spectrometry and theoretical analysis revealed that L-Trp can be encapsulated into the cavity of MeP5 to form a stable 1:1 host-guest inclusion complex which accounts for the quenching characteristics. The proposed procedure in this investigation offers an attractive and promising method for the selective detection of L-Trp in a mixture of natural amino acids.

Highly Selective Separation of Isopropylbenzene and α-Methylstyrene by Nonporous Adaptive Crystals of Perbromoethylated Pillararene via Vapor- and Liquid-Phase Adsorptions

Isopropylbenzene (IPB) and α-methylstyrene (AMS), two members of C9 aromatics, are important in both industrial production and laboratory research, but the separation of IPB/AMS mixtures is still a big challenge. Here, we provide a new strategy to separate IPB and AMS using nonporous adaptive crystals of four pillararenes, perethylated pillar[5]arene, perethylated pillar[6]arene, perbromoethylated pillar[5]arene, and perbromoethylated pillar[6]arene (BrP6). Among them, BrP6 selectively adsorbs IPB from an equal volume mixture of IPB and AMS with >95% purity for solid-vapor phase adsorption and >94% purity for solid-liquid phase adsorption, while the selectivities for the other three pillararenes are unsatisfactory. Single-crystal structural analyses combined with powder X-ray diffraction and differential scanning calorimetry experiments demonstrate that the selectivity arises from the different stabilities of guest-loaded BrP6 crystals. Moreover, the reversible transitions between guest-free and IPB-loaded structures indicate the preeminent recycling performance of BrP6 crystals.

Pre-regulation of the planar chirality of pillar[5]arenes for preparing discrete chiral nanotubes

Regulating the chirality of macrocyclic host molecules and supramolecular assemblies is crucial because chirality often plays a role in governing the properties of these systems. Herein, we describe pillar[5]arene-based chiral nanotube formation via pre-regulation of the building blocks' chirality, which is different from frequently used post-regulation strategies. The planar chirality of rim-differentiated pillar[5]arenes is initially regulated by chiral awakening and further induction/inversion through stepwise achiral external stimuli. The pre-regulated chiral information is well stored in discrete nanotubes by interacting with a per-alkylamino-substituted pillar[5]arene. Such pre-regulation is more efficient than post-regulating the chirality of nanotubes.

Multiple Stimuli-Responsive Conformational Exchanges of Biphen[3]arene Macrocycle

Conformational exchanges of synthetic macrocyclic acceptors are rather fast, which is rarely studied in the absence of guests. Here, we report multiple stimuli-responsive conformational exchanges between two preexisting conformations of 2,2',4,4'-tetramethoxyl biphen[3]arene (MeBP3) macrocycle. Structures of these two conformations are both observed in solid state, and characterized by ¹H NMR, ¹³C NMR and 2D NMR in solution. In particular, conformational exchanges can respond to solvents, temperatures, guest binding and acid/base addition. The current system may have a role to play in the construction of molecular switches and other stimuli-responsive systems.

Metal-Free White Light-Emitting Fluorescent Material Based on Simple Pillar[5]arene-tripodal Amide System and Theoretical Insights on Its Assembly and Fluorescent Properties

The booming of host-guest assembly-based supramolecular chemistry provides abundant ways to construct functional systems and materials. Attracted by the important application prospect of white light emission and aggregation-induced emission (AIE) materials, herein, we report an efficient way for fabricating metal-free white light-emitting AIE materials through the supramolecular assembly of simple organic compounds: methoxyl pillar[5]arene (MP5) and tri-(pyridine-4-ylamido)benzene (TAP). By host-guest assembly, MP5 and TAP formed a supramolecular polymer (MP5-T); meanwhile, the MP5-T xerogel powder emitted white light at CIE coordinates (0.29 and 0.29). The supramolecular assembly and white light-emitting mechanisms were carefully investigated by experiments as well as quantum chemical calculations including density functional theory (DFT), reduced density gradient, electrostatic surface potential, independent gradient model, and frontier molecular orbital (highest-occupied molecular orbital-lowest-unoccupied molecular orbital) analyses. Interestingly, according to the experiments and calculations, the supramolecular assembly is critical in the white light-emitting phenomenon. Moreover, in this work, the quantum chemical calculations could not only support experimental phenomena but also provide deep understanding and visualized presentation of the assembly and emission mechanism. In addition, the obtained MP5-T solid powder could serve as a novel and easy means to make material for white light-emitting devices.

Stereochemical Inversion of Rim-Differentiated Pillar[5]arene Molecular Swings

To investigate the dynamic stereochemical inversion behavior of pillar[5]arenes (P[5]s) in more detail, we synthesized a series of novel rim-differentiated P[5]s with various substituents and examined their rapid rotations by variable-temperature NMR (203–298 K). These studies revealed for the first time the barrier of “methyl-through-the-annulus” rotation (ΔG^‡ = 47.4 kJ·mol^–1 in acetone) and indicated that for rim-differentiated P[5]s with two types of alkyl substituents, the smaller rim typically determines the rate of rotation. However, substituents with terminal C=C or C≡C bonds give rise to lower inversion barriers, presumably as a result of attractive π–π interactions in the transition state. Finally, data on a rim-differentiated penta-methyl-penta-propargyl P[5] exhibited the complexity of the overall inversion dynamics.

Conformationally adaptive macrocycles with flipping aromatic sidewalls

Conformationally adaptive macrocycles possess multiple well-defined conformations through quickly flipping their aromatic sidewalls. The macrocycles combine the binding power of all the conformations. Upon binding a guest, one or a combination of conformations are selected to achieve the maximized binding affinity. In addition, the complex conformational network is responsive to changes in temperature or solvent. It has been demonstrated that these macrocycles have unique properties in chirality sensing, stimuli-responsive self-assembly, and molecular switches. In this tutorial review, we summarize recent advances on conformationally adaptive macrocycles with an emphasis on our own research. We believe that this class of macrocycles will have a bright future in supramolecular chemistry and beyond.