Light-Driven Carbon-Carbon Coupling of α-sp3-CH of Aliphatic Alcohols with sp2-CH Bond of 1,4-Naphthoquinones

Design, Synthesis, and Antibacterial Activities of Multi-Functional C2-Functionalized 1,4-Naphthoquinonyl Organoseleniums

A practical and efficient reaction for C2-selenylation of 1,4-naphthoquinones has been explored. This coupling reaction of two redox structural motifs, such as 2-bromo-1,4-naphthoquinone with diaryldiselenide/ebselen has been achieved by using sodium borohydride reducing agent at room temperature. Using this approach, several 2-selenylated-1,4-naphthoquinones were obtained in moderate to good yields and thoroughly characterized by multinuclear (1H, 13C, and 77Se) NMR, cyclic voltammetry, and mass spectrometry. Further, light-irradiated thiolation of the synthesized selenazinone was also performed to show the utility of the synthesized compound for post-functionalization. Several 2-selenylated-1,4-naphthoquinones were studied by SC-XRD in which intramolecular Se⋅⋅⋅N (from quinolinyl ligand) non-bonded interactions were observed. Photophysical studies (UV-visible, emission, solvatochromism, and quantum yield) were also performed on selected C2-selenylated naphthoquinones. The naphthoquinonyl organoseleniums were also screened for their antibacterial properties and quinonyl organoselenium 5 d shows good antibacterial potential against S. aureus ATCC 29213 with MIC 0.5 μg/mL and a Selectivity Index of >200. Moreover, it also exhibited equipotent activity against various strains of S. aureus and Enterococcus faecium, including strains resistant to vancomycin and meropenem. From structure-activity correlation, it seems that nice blend of oxidant properties from quinone and antioxidant properties from selenium moiety makes it better candidate for antibacterial activity.

Recent progress in C-S bond formation via electron donor-acceptor photoactivation

Recent advancements in C-S bond formation via electron donor-acceptor (EDA) complex photoactivation have been remarkable. EDA complexes, which are composed of electron donors and acceptors, facilitate C-S bond construction under mild conditions through single-electron transfer events upon visible light irradiation. This review highlights the utilization of various sulfur-containing substrates, including diacetoxybenzenesulfonyl (DABSO), sulfonic acids, sodium sulfinates, sulfonyl chlorides, and thiophenols, in EDA-promoted sulfonylation and thiolation reactions, covering the works published since 2017 to date. These reactions offer novel, environmentally friendly pathways for the synthesis of sulfur-containing compounds.

Ferric Nitrate as a Bifunctional Catalyst for Dehydration and Oxidative Cleavage-Esterification of Tertiary Alcohols

The selective oxidative cleavage and functionalization of C(OH)-C bonds in tertiary alcohols harbor immense feasibility in organic synthesis and enable the production of high value-added chemicals from renewable biomass. However, it remains a challenge, owing to the inherent kinetic inertness and thermodynamic stability of C(OH)-C bonds and the lack of Cα-H. Taking the huge potential and challenge of C(OH)-C bond activation and functionalization into consideration, herein, we show the first example of an inexpensive bifunctional ferric nitrate catalyst for catalytic direct oxidation of structurally distinct tertiary alcohols to esters with environmentally benign molecular oxygen as an oxidant and MeOH as a solvent, without the assistance of any additives. Detailed mechanistic studies reveal that this tandem catalytic oxidative process is initiated by the synergistic effects of an iron ion and nitrate ion, which serve as Lewis acids for dehydrating and a nitrogen dioxide radical precursor for inducing an oxidative cleavage, respectively.

TEMPO-Mediated Direct C(sp2)-H Alkoxylation/Aryloxylation of 1,4-Quinones

A convenient and efficient transition-metal-free method has been developed for the C(sp2)-H alkoxylation/aryloxylation of 1,4-quinones by direct cross-dehydrogenative coupling with readily available alcohols and phenols in the presence of TEMPO under simple and mild conditions. The method allowed the installation of a wide range of alkoxy/aryloxy groups, exhibited high functional group tolerance, showed a broad substrate scope, afforded good to excellent yields of products in a simple one-pot operation, and could be performed on a gram scale. Mechanistic investigation indicated the involvement of the radical pathway.

Regio- and diastereoselective synthesis of cyclobutylated phenothiazines via [2 + 2] photocycloaddition: demonstrating wavelength-gated cycloreversion inside live cells

Herein, we unveiled a regio- and diastereoselective synthesis of cyclobutylated phenothiazines, a unique class of structural congeners of phenothiazines via visible-light-irradiated intermolecular [2 + 2]-cycloaddition reaction, from readily available naphthoquinones, 2-aminothiophenols, and styrenes, either in a two-step or three-component coupling process. By varying substitutions in all three coupling partners, a library of cyclobutylated phenothiazines, including late-stage derivatization with five commercial drugs, has been realized with up to 97% isolated yield. In contrast to the reported pathways, the developed [2 + 2]-photocycloaddition seems to proceed via a 'photoinduced-electron-transfer' (PET) mechanism, which is well corroborated with the experimental observations, Rehm-Weller equation, and computation studies. Delightfully, a wavelength-gated reversibility of the [2 + 2]-photocycloaddition reaction has been accomplished on the synthesized cyclobutylated phenothiazines. By monitoring the rate of the cycloreversion reactions for different derivatives, a structure-activity relationship has also been achieved. Interestingly, this phenomenon was further replicated inside living cells, which leads to turn-on emission and is applied for photoresponsive cell imaging. This marks the first report of a light-triggered [2 + 2]-cycloreversion phenomenon occurring inside a live cell, leading to cell imaging. Moreover, the synthesized drug derivatives were utilized for synchronous cell imaging as well as drug delivery through the developed [2 + 2]-photocycloreversion process, which demonstrated the potential applicability of this class of molecules.

Recent Advances of C-S Coupling Reaction of (Hetero)Arenes by C-H Functionalization

Organic sulfur compounds encompass a vast and diverse variety of species that possess unique biological activity due to the presence of sulfur atoms or sulfur-containing functional groups. These compounds are widely present in natural products, pharmaceuticals, agricultural chemicals, and functional materials. In recent years, numerous sulfur-containing compounds such as thiols, thioethers, disulfides, thiourea, dimethyl sulfoxide, sulfonates and their derivatives, as well as sulfur-containing inorganic compounds, have been utilized as coupling agents to synthesize (hetero)aryl sulfides via C-H Functionalization. These novel transformations provide effective methods for constructing C-S bond of (hetero)arenes, while also expanding the scope of (hetero)aryl sulfides with the potential biological activity. Therefore, the synthesis of aryl sulfides through C-H bond functionalization has attracted widespread attention. This review mainly focuses on the construction of (hetero)aryl sulfides via C-H bond functionalization since 2015. We hope this review offers a useful conceptual overview and inspires further advancements in the efficient construction of C-S bonds.

Benzoimidazolyl Organoseleniums: Antioxidant Activity and Catalysts for Selective Iodination of Arenes and Nitro-Michael Reaction

Here, the synthesis and catalytic activities of benzoimidazole-derived organoselenium compounds have been explored. The synthesized bis(2-benzoimidazolyl) diselenide, having increased Lewis acidity on the selenium center, outperforms simple phenyl and N-phenyl benzamide-based diselenides when compared for thiol peroxidase hydrogen peroxide decomposing antioxidant activity with a reduction rate of 18.6 ± 1.9 μM/s. The synthesized diselenide also acted as an efficient catalyst for the activation of N-iodo-succinimide toward the regioselective, monoiodination of electron-rich arenes and activation of nitro-alkene for nitro-Michael reactions for the first time.

Synthesis of Diaryl Tellurides with Sodium Aryltellurites under Mild Conditions

A highly efficient new protocol has been developed for the formation of C-Te bonds, leading to both symmetrical and unsymmetrical diaryl tellurides. This protocol utilizes sodium aryltellurites (4), which can be easily prepared from low-cost aryltelluride trichlorides and NaOH. The synthesis involves the use of 4 and arylazo sulfones as starting materials in the presence of (MeO)2P(O)H. A variety of diaryl tellurides are obtained in moderate to good yields using this method. Importantly, this innovative protocol eliminates the need for traditional, highly toxic aryltellurolating reagents such as diaryl ditellurides and elemental tellurium. This study will bring new vitality to the synthesis of tellurides.

Blue-Light Irradiated Mn(0)-Catalyzed Hydroxylation and C(sp3 )-H Functionalization of Unactivated Alkanes with C(sp2 )-H Bonds of Quinones for Alkylated Hydroxy Quinones and Parvaquone

Site-selective C(sp3 )-H functionalization of unreactive hydrocarbons is always challenging due to its inherited chemical inertness, slightly different reactivity of various C-H bonds, and intrinsically high bond dissociation energies. Here, a site-selective C-H alkylation of naphthoquinone with unactivated hydrocarbons using Mn2 (CO)10 as a catalyst under blue-light (457 nm) irradiation without any external acid or base and pre-functionalization is presented. The selective C-H functionalization of tertiary over secondary and secondary over primary C(sp3 )-H bonds in abundant chemical feedstocks was achieved, and hydroxylation of quinones was realized in situ by employing the developed methodology. This protocol provides a new catalytic system for the direct construction of high-value-added compounds, namely, parvaquone (a commercially available drug used to treat theileriosis) and its derivatives under ambient reaction conditions. Moreover, this operationally simple protocol applies to various linear-, branched-, and cyclo-alkanes with high degrees of site selectivity under blue-light irradiated conditions and could provide rapid and straightforward access to versatile methodologies for upgrading feedstock chemicals. Mechanistic insight by radical trapping, radical scavenging, EPR, and other controlled experiments well corroborated with DFT studies suggest that the reaction proceeds by a radical pathway.

Synthesis and Photochemical Properties of Fluorescent Metabolites Generated from Fluorinated Benzoylmenadiones in Living Cells

This work describes the reactivity and properties of fluorinated derivatives (F-PD and F-PDO) of plasmodione (PD) and its metabolite, the plasmodione oxide (PDO). Introduction of a fluorine atom on the 2-methyl group markedly alters the redox properties of the 1,4-naphthoquinone electrophore, making the compound highly oxidizing and particularly photoreactive. A fruitful set of analytical methods (electrochemistry, absorption and emission spectrophotometry, and HRMS-ESI) have been used to highlight the products resulting from UV photoirradiation in the absence or presence of selected nucleophiles. With F-PDO and in the absence of nucleophile, photoreduction generates a highly reactive ortho-quinone methide (o-QM) capable of leading to the formation of a homodimer. In the presence of thiol nucleophiles such as β-mercaptoethanol, which was used as a model, o-QMs are continuously regenerated in sequential photoredox reactions generating mono- or disulfanylation products as well as various unreported sulfanyl products. Besides, these photoreduced adducts derived from F-PDO are characterized by a bright yellowish emission due to an excited-state intramolecular proton transfer (ESIPT) process between the dihydronapthoquinone and benzoyl units. In order to evidence the possibility of an intramolecular coupling of the o-QM intermediate, a synthetic route to the corresponding anthrones is described. Tautomerization of the targeted anthrones occurs and affords highly fluorescent stable hydroxyl-anthraquinones. Although probable to explain the intense visible fluorescence emission also observed in tobacco BY-2 cells used as a cellular model, these coupling products have never been observed during the photochemical reactions performed in this study. Our data suggest that the observed ESIPT-induced fluorescence most likely corresponds to the generation of alkylated products through reduction species, as demonstrated with the β-mercaptoethanol model. In conclusion, F-PDO thus acts as a novel (pro)-fluorescent probe for monitoring redox processes and protein alkylation in living cells.

Synthesis of Acylhydroquinones through Visible-Light-Mediated Hydroacylation of Quinones with α-Keto Acids

A mild and eco-friendly visible-light-induced protocol for the hydroacylation of quinones with α-keto acids has been developed. In the absence of any catalyst or additive, the decarboxylative hydroacylation proceeded smoothly under visible-light irradiation at room temperature. A wide range of quinones and α-keto acids were well-tolerated and afforded hydroacylation products up to 88% isolated yield. The reaction can be scaled up, and the induced groups are useful for further synthetic applications. Preliminarily, mechanistic studies indicated that photoactive quinones absorb visible light to facilitate the transformation.

Recent advances in selective mono-/dichalcogenation and exclusive dichalcogenation of C(sp2)-H and C(sp3)-H bonds

Organochalcogen compounds are prevalent in numerous natural products, pharmaceuticals, agrochemicals, polymers, biological molecules and synthetic intermediates. Direct chalcogenation of C-H bonds has evolved as a step- and atom-economical method for the synthesis of chalcogen-bearing compounds. Nevertheless, direct C-H chalcogenation severely lags behind C-C, C-N and C-O bond formations. Moreover, compared with the C-H monochalcogenation, reports of selective mono-/dichalcogenation and exclusive dichalcogenation of C-H bonds are relatively scarce. The past decade has witnessed significant advancements in selective mono-/dichalcogenation and exclusive dichalcogenation of various C(sp2)-H and C(sp3)-H bonds via transition-metal-catalyzed/mediated, photocatalytic, electrochemical or metal-free approaches. In light of the significance of both mono- and dichalcogen-containing compounds in various fields of chemical science and the critical issue of chemoselectivity in organic synthesis, the present review systematically summarizes the advances in these research fields, with a special focus on elucidating scopes and mechanistic aspects. Moreover, the synthetic limitations, applications of some of these processes, the current challenges and our own perspectives on these highly active research fields are also discussed. Based on the substrate types and C-H bonds being chalcogenated, the present review is organized into four sections: (1) transition-metal-catalyzed/mediated chelation-assisted selective C-H mono-/dichalcogenation or exclusive dichalcogenation of (hetero)arenes; (2) directing group-free selective C-H mono-/dichalcogenation or exclusive dichalcogenation of electron-rich (hetero)arenes; (3) C(sp3)-H dichalcogenation; (4) dichalcogenation of both C(sp2)-H and C(sp3)-H bonds. We believe the present review will serve as an invaluable resource for future innovations and drug discovery.

Mn-Mediated Direct Regioselective C-H Trifluoromethylation of Imidazopyridines and Quinoxalines

A simple and highly efficient strategy has been developed for direct C-H trifluoromethylation at C-3 of imidazopyridines and C-8 of quinoxalines with readily available Langlois reagent through KMnO₄/AcOH system. This protocol showed broad substrate scope and afforded moderate-to-excellent yields of both products. It is the first report that the functionalization of quinoxalines occurred regioselectively at the C-8 position of quinoxalines. Mechanistic studies revealed that reaction proceeded via radical pathway.

Blue Light Irradiated Metal-, Oxidant-, and Base-Free Cross-Dehydrogenative Coupling of C(sp2)-H and N-H Bonds: Amination of Naphthoquinones with Amines

Herein, we report a blue-light-driven amination of C(sp²)-H bond of naphthoquinones and quinones with the N-H bond of primary and secondary amines for the synthesis of 2-amino-naphthoquinones and 2-amino-quinones. The coupling of naphthoquinones with a wide array of aliphatic, aromatic, chiral, primary, and secondary amines having electron donating (-CH₃, -OCH₃, -SCH₃), withdrawing (-F, -Cl, -Br, -I), and CO₂H, -OH, -NH₂ groups with acidic protons selectively occurred to afford C-N coupled 2-amino-naphthoquinones in 60-99% yields and hydrogen gas as a byproduct in methanol solvent without using any additional reagents, additives, and oxidant under the blue light irradiation. Mechanistic insight by DFT computation, controlled experiments, kinetic isotopic effect, and substitution effect of the substrates suggest that the reaction proceeds by radical pathway in which naphthoquinone forms a highly oxidizing naphthoquinonyl biradical upon irradiation of blue light (457 nm). Consequently, electron transfer from electron-rich amine to an oxidizing naphthoquinonyl biradical leads to a naphthoquinonyl radical anion and aminyl radical cation, followed by proton transfer and delocalization leading to a carbon-centered naphthoquinonyl radical. The cross-coupling of naphthoquinonyl carbon-centered and aminyl nitrogen radicals forms a C-N bond, with subsequent elimination of hydrogen gas (which was also confirmed by GC-TCD), affording 2-amino-1,4-naphthoquinone under metal-, reagent-, base-, and oxidant-free conditions.