Bimane: A Visible Light Induced Fluorescent Photoremovable Protecting Group for the Single and Dual Release of Carboxylic and Amino Acids

Highly tunable bimane-based fluorescent probes: design, synthesis, and application as a selective amyloid binding dye

Small molecule fluorescent probes are indispensable tools for a broad range of biological applications. Despite many probes being available, there is still a need for probes where photophysical properties and biological selectivity can be tuned as desired. Here, we report the rational design and synthesis of a palette of fluorescent probes based on the underexplored bimane scaffold. The newly developed probes with varied electronic properties show tunable absorption and emission in the visible region with large Stokes shifts. Probes featuring electron-donating groups exhibit rotor effects that are sensitive to polarity and viscosity by "intramolecular charge transfer" (ICT) and twisted intramolecular charge transfer (TICT) mechanisms, respectively. These properties enable their application as "turn-on" fluorescent probes to detect fibrillar aggregates of the α-synuclein (αS) protein that are a hallmark of Parkinson's disease (PD). One probe shows selective binding to αS fibrils relative to soluble proteins in cell lysates and amyloid fibrils of tau and amyloid-β. Finally, we demonstrate the diagnostic potential of the probe in selectively detecting αS fibrils amplified from PD with dementia (PDD) patient samples.

Förster resonance energy transfer within single chain nanoparticles

Single chain nanoparticles (SCNPs) are a highly versatile polymer architecture consisting of single polymer chains that are intramolecularly crosslinked. Currently, SCNPs are discussed as powerful macromolecular architectures for catalysis, delivery and sensors. Herein, we introduce a methodology based on Förster Resonance Energy Transfer (FRET) to evidence the folding of single polymer chains into SCNPs via fluorescence readout. We initially introduce a molecular FRET pair based on a bimane and nitrobenzoxadiazole (NBD) moiety and study its fluorescence properties in different solvents. We subsequently construct a low dispersity polymer chain carrying NBD units, while exploiting the bimane units for intramolecular chain collapse. Upon chain collapse and SCNP formation - thus bringing bimane and NBD units into close proximity - the SCNPs report their folded state by a strong and unambiguous FRET fluorescence signal. The herein introduced reporting of the folding state of SCNPs solely relies on an optical readout, opening avenues to monitoring SCNP folding without recourse to complex analytical methodologies.

Application of TNB in dual photo-controlled release of phenamacril, imidacloprid, and imidacloprid synergist

Pesticides can improve crops' yield and quality, but unreasonable applications of pesticides lead to waste of pesticides which are further accumulated in the environment and threaten human health. Developing the release of controlled drugs can improve the utilization rate of pesticides. Among these methods, light-controlled release is a new technology of controlled release, which can realize spatiotemporal delivery of drugs by light. Four compounds, named Imidacloprid-Thioacetal o-nitrobenzyl-Phenamacril (IMI-TNB-PHE), Imidacloprid-Thioacetal o-nitrobenzyl- Imidacloprid (IMI-TNB-IMI), Phenamacril-Thioacetal o-nitrobenzyl-Phenamacril (PHE-TNB-PHE), and Imidacloprid-Thioacetal o-nitrobenzyl-Imidacloprid Synergist (IMI-TNB-IMISYN), were designed and synthesized by connecting thioacetal o-nitrobenzyl (TNB) with pesticides TNB displaying simple and efficient optical properties in this work. Dual photo-controlled release of pesticides including two molecules of IMI or PHE, both IMI and PHE, as well as IMI and IMISYN were, respectively, studied in this paper. Insecticidal/fungicidal activities of the photosensitive pesticides showed 2-4 times increments if they were exposed to light. In addition, a synergistic effect was observed after the light-controlled release of IMI-TNB-IMISYN, which was consistent with the effect of IMISYN. The results demonstrated whether dual photo-controlled release of the same or different pesticide molecules could be achieved with a TNB linker with spatiotemporal precision. We envisioned that TNB will be an innovative photosensitive protective group for light-dependent application of agrochemicals in the future.

Shedding light on cellular dynamics: the progress in developing photoactivated fluorophores

Photoactivated fluorophores (PAFs) are highly effective imaging tools that exhibit a removal of caging groups upon light excitation, resulting in the restoration of their bright fluorescence. This unique property allows for precise control over the spatiotemporal aspects of small molecule substances, making them indispensable for studying protein labeling and small molecule signaling within live cells. In this comprehensive review, we explore the historical background of this field and emphasize recent advancements based on various reaction mechanisms. Additionally, we discuss the structures and applications of the PAFs. We firmly believe that the development of more novel PAFs will provide powerful tools to dynamically investigate cells and expand the applications of these techniques into new domains.

Thioxobimanes

Dioxobimanes, colloquially known as bimanes, are a well-established family of N-heterobicyclic compounds that share a characteristic core structure, 1,5-diazabicyclo[3.3.0]octadienedione, bearing two endocyclic carbonyl groups. By sequentially thionating these carbonyls in the syn and anti isomers of the known (Me,Me)dioxobimane, we were able to synthesize a series of thioxobimanes, representing the first heavy-chalcogenide bimane variants. These new compounds were extensively characterized spectroscopically and crystallographically, and their aromaticity was probed computationally. Their potential role as ligands for transition metals was demonstrated by synthesizing a representative gold(I)-thioxobimane complex.

Visible-Light-Induced Control over Reversible Single-Chain Nanoparticle Folding

We introduce a class of single-chain nanoparticles (SCNPs) that respond to visible light (λmax =415 nm) with complete unfolding from their compact structure into linear chain analogues. The initial folding is achieved by a simple esterification reaction of the polymer backbone constituted of acrylic acid and polyethylene glycol carrying monomer units, introducing bimane moieties, which allow for the photochemical unfolding, reversing the ester-bond formation. The compaction and the light driven unfolding proceed cleanly and are readily followed by size exclusion chromatography (SEC) and diffusion ordered NMR spectroscopy (DOSY), monitoring the change in the hydrodynamic radius (RH ). Importantly, the folding reaction and the light-induced unfolding are reversible, supported by the high conversion of the photo cleavage. As the unfolding reaction occurs in aqueous systems, the system holds promise for controlling the unfolding of SCNPs in biological environments.

Visible Light Degradable Acridine-Containing Polyurethanes in an Aqueous Environment

Light degradable polymers hold significant promise in a wide range of applications including the fabrication of optically recyclable materials, responsive coatings and adhesives, and controlled drug delivery. Here, we report the synthesis of polyurethanes that can be degraded under irradiation of visible light (≤450 nm) from commercial LED (3-15 W) light sources. The photolysis occurs in an aqueous environment via photocleavage of an acridine moiety incorporated within the backbone of the polymer chains. Analysis of the quantum yield as a function of wavelength reveals highly efficient photoreactivity at up to 440 nm activation, which is red-shifted compared to the UV-vis absorbance of the chromophore. The potential of our chemical system in biomaterials is demonstrated by the fabrication of an in situ forming hydrogel that can be degraded by visible light.

Dual photo-controlled release system for fipronil and dinotefuran

Development of controlled release system promises a huge impact on the pesticide delivery, which has raised attentions in improving efficacy of pesticides. Herein, the emerging photoremovable protecting group (PRPG), used in spatiotemporal delivery of drug by light, was introduced into agriculture. We obtained three TNB-insecticides and two of them exhibited excellent photophysicochemical properties. Our dual photo-controlled release system displayed more than sixfold insecticidal activity differences upon irradiation with UV light or sunlight. The dual release of DIN-TNB-DIN showed synergistic effect on mosquito larvae and armyworm larvae. Distribution of the fluorescence in body of dead/alive wigglers clearly illustrated the action mode, and visually demonstrated the precise and spatiotemporal delivery of insecticides in the living mosquito larvae. The new developed dual photo-controlled release system might widen the diversity in pesticide delivery, promoting the development in improving pesticide efficacy.

Visible-Light-Degradable 3D Microstructures in Aqueous Environments

The additive manufacturing technique direct laser writing (DLW), also known as two-photon laser lithography, is becoming increasingly established as a technique capable of fabricating functional 3D microstructures. Recently, there has been an increasing effort to impart microstructures fabricated using DLW with advanced functionalities by introducing responsive chemical entities into the underpinning photoresists. Herein, a novel photoresist based on the photochemistry of the bimane group is introduced that can be degraded upon exposure to very mild conditions, requiring only water and visible light (λ_max  = 415-435 nm) irradiation. The degradation of the microstructures is tracked and quantified using AFM measurements of their height. The influence of the writing parameters as well as the degradation conditions is investigated, unambiguously evidencing effective visible light degradation in aqueous environments. Finally, the utility of the photodegradable resist system is demonstrated by incorporating it into multimaterial 3D microstructures, serving as a model for future applications.

Switching photorelease to singlet oxygen generation by oxygen functionalization of phenothiazine photocages

A phenothiazine-based photoremovable protecting group (PRPG) for single and dual release of carboxylic acids was developed. The change in the oxidation state of the sulfur atom of the phenothiazine PRPG resulted in singlet oxygen generation, rather than photorelease. The difference in the photochemistry between oxygen-free and oxygen-functionalized phenothiazine was investigated and supported by DFT calculations.

Wavelength-Selective Softening of Hydrogel Networks

Photoresponsive hydrogels hold key potential in advanced biomedical applications including tissue engineering, regenerative medicine, and drug delivery, as well as intricately engineered functions such as biosensing, soft robotics, and bioelectronics. Herein, the wavelength-dependent degradation of bio-orthogonal poly(ethylene glycol) hydrogels is reported, using three selective activation levels. Specifically, three chromophores are exploited, that is, ortho-nitrobenzene, dimethyl aminobenzene, and bimane, each absorbing light at different wavelengths. By examining their photochemical action plots, the wavelength-dependent reactivity of the photocleavable moieties is determined. The wavelength-selective addressability of individual photoreactive units is subsequently translated into hydrogel design, enabling wavelength-dependent cleavage of the hydrogel networks on-demand. Critically, this platform technology allows for the fabrication of various hydrogels, whose mechanical properties can be fine-tuned using different colors of light to reach a predefined value, according to the chromophore ratios used. The softening is shown to influence the spreading of pre-osteoblastic cells adhering to the gels as a demonstration of their potential utility. Furthermore, the materials and photodegradation processes are non-toxic to cells, making this platform attractive for biomaterials engineering.

Triggering biological processes: methods and applications of photocaged peptides and proteins

There has been a significant push in recent years to deploy fundamental knowledge and methods of photochemistry toward biological ends. Photoreactive groups have enabled chemists to activate biological function using the concept of photocaging. By granting spatiotemporal control over protein activation, these photocaging methods are fundamental in understanding biological processes. Peptides and proteins are an important group of photocaging targets that present conceptual and technical challenges, requiring precise chemoselectivity in complex polyfunctional environments. This review focuses on recent advances in photocaging techniques and methodologies, as well as their use in living systems. Photocaging methods include genetic and chemical approaches that require a deep understanding of structure-function relationships based on subtle changes in primary structure. Successful implementation of these ideas can shed light on important spatiotemporal aspects of living systems.

Single component photoresponsive fluorescent organic nanoparticles: a smart platform for improved biomedical and agrochemical applications

Single component photoresponsive fluorescent organic nanoparticles for the regulated release of anticancer drugs, antibacterial agents, gasotransmitters, and agrochemicals and as effective PDT agents.

Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials

Photoactivatable (alternatively, photoremovable, photoreleasable, or photocleavable) protecting groups (PPGs), also known as caged or photocaged compounds, are used to enable non-invasive spatiotemporal photochemical control over the release of species of interest. Recent years have seen the development of PPGs activatable by biologically and chemically benign visible and near-infrared (NIR) light. These long-wavelength-absorbing moieties expand the applicability of this powerful method and its accessibility to non-specialist users. This review comprehensively covers organic and transition metal-containing photoactivatable compounds (complexes) that absorb in the visible- and NIR-range to release various leaving groups and gasotransmitters (carbon monoxide, nitric oxide, and hydrogen sulfide). The text also covers visible- and NIR-light-induced photosensitized release using molecular sensitizers, quantum dots, and upconversion and second-harmonic nanoparticles, as well as release via photodynamic (photooxygenation by singlet oxygen) and photothermal effects. Release from photoactivatable polymers, micelles, vesicles, and photoswitches, along with the related emerging field of photopharmacology, is discussed at the end of the review.

Photo-Responsive Polymersomes as Drug Delivery System for Potential Medical Applications

Due to a strong retardation effect of o-nitrobenzyl ester on polymerization, it is still a great challenge to prepare amphiphilic block copolymers for polymersomes with a o-nitrobenzyl ester-based hydrophobic block. Herein, we present one such solution to prepare amphiphilic block copolymers with pure poly (o-nitrobenzyl acrylate) (PNBA) as the hydrophobic block and poly (N,N'-dimethylacrylamide) (PDMA) as the hydrophilic block using bulk reversible addition-fragmentation chain transfer (RAFT) polymerization of o-nitrobenzyl acrylate using a PDMA macro-RAFT agent. The developed amphiphilic block copolymers have a suitable hydrophobic/hydrophilic ratio and can self-assemble into photoresponsive polymersomes for co-loading hydrophobic and hydrophilic cargos into hydrophobic membranes and aqueous compartments of the polymersomes. The polymersomes demonstrate a clear photo-responsive characteristic. Exposure to light irradiation at 365 nm can trigger a photocleavage reaction of o-nitrobenzyl groups, which results in dissociation of the polymersomes with simultaneous co-release of hydrophilic and hydrophobic cargoes on demand. Therefore, these polymersomes have great potential as a smart drug delivery nanocarrier for controllable loading and releasing of hydrophilic and hydrophobic drug molecules. Moreover, taking advantage of the conditional releasing of hydrophilic and hydrophobic drugs, the drug delivery system has potential use in medical applications such as cancer therapy.

Water-Soluble BODIPY Photocages with Tunable Cellular Localization

Photoactivation of bioactive molecules allows manipulation of cellular processes with high spatiotemporal precision. The recent emergence of visible-light excitable photoprotecting groups has the potential to further expand the established utility of the photoactivation strategy in biological applications by offering higher tissue penetration, diminished phototoxicity, and compatibility with other light-dependent techniques. Nevertheless, a critical barrier to such applications remains the significant hydrophobicity of most visible-light excitable photocaging groups. Here, we find that applying the conventional 2,6-sulfonation to meso-methyl BODIPY photocages is incompatible with their photoreaction due to an increase in the excited state barrier for photorelease. We present a simple, remote sulfonation solution to BODIPY photocages that imparts water solubility and provides control over cellular permeability while retaining their favorable spectroscopic and photoreaction properties. Peripherally disulfonated BODIPY photocages are cell impermeable, making them useful for modulation of cell-surface receptors, while monosulfonated BODIPY retains the ability to cross the cellular membrane and can modulate intracellular targets. This new approach is generalizable for controlling BODIPY localization and was validated by sensitization of mammalian cells and neurons by visible-light photoactivation of signaling molecules.

Real-time monitoring of a photoactivated hydrogen persulfide donor for biological entities

Hydrogen persulfide (H2S2) plays an important role in sulfur-based redox signaling mechanisms. Herein, we developed a visible light activated ESIPT based H2S2 donor using a p-hydroxyphenacyl phototrigger. The unique feature of the designed H2S2 donor system is the ability to monitor the H2S2 release in real time through a non-invasive fluorescence color change approach, with the color changing from green to blue. Next, we demonstrated the detection and quantification of H2S2 using a fluorescein based "turn-on" fluorescent probe. Furthermore, in vitro studies of the designed H2S2 donor demonstrated the real-time monitored H2S2 release and cytoprotective ability in the highly oxidizing cellular environment of MDA-MB-468 cells.

Cyanine Modification Tuned for Amine Photorelease

Cyanines are emerging as useful agents for photoreleasing biological compounds because of their capability of utilizing near-infrared (NIR) light. Another benefit is their ability to self-sensitize to produce singlet oxygen for the release of aryl amines, a process that has not been as feasible in the past. Here, we highlight the paper by Schnermann et al. (https://doi.org/10.1111/php.13090), which reports on a cyanine conjugate for heterolytic photocleavage of aryl amines. This paper is timely-delving into a photorelease mechanism involving a domino rearrangement and β-elimination triggered by NIR light.

One- and two-photon responsive sulfur dioxide (SO2) donors: a combinatorial drug delivery for improved antibiotic therapy

Light-activated sulfur dioxide donors have been developed and explored their applicability for combinatorial antibiotic therapy with self-monitoring ability.

S,S-Chiral Linker Induced U Shape with a Syn-facial Sensitizer and Photocleavable Ethene Group

There is a major need for light-activated materials for the release of sensitizers and drugs. Considering the success of chiral columns for the separation of enantiomer drugs, we synthesized an S,S-chiral linker system covalently attached to silica with a sensitizer ethene near the silica surface. First, the silica surface was modified to be aromatic rich, by replacing 70% of the surface groups with (3-phenoxypropyl)silane. We then synthesized a 3-component conjugate [chlorin sensitizer, S,S-chiral cyclohexane and ethene building blocks] in 5 steps with a 13% yield, and covalently bound the conjugate to the (3-phenoxypropyl)silane-coated silica surface. We hypothesized that the chiral linker would increase exposure of the ethene site for enhanced ¹ O₂ -based sensitizer release. However, the chiral linker caused the sensitizer conjugate to adopt a U shape due to favored 1,2-diaxial substituent orientation; resulting in a reduced efficiency of surface loading. Further accentuating the U shape was π-π stacking between the (3-phenoxypropyl)silane and sensitizer. Semiempirical calculations and singlet oxygen luminescence data provided deeper insight into the sensitizer's orientation and release. This study has lead to insight on modifications of surfaces for drug photorelease and can help lead to the development of miniaturized photodynamic devices.

A chemically encoded timer for dual molecular delivery at tailored ranges and concentrations

Spatiotemporal control of molecular distribution is much in demand in many fields of chemistry. To address this goal, we exploit a low molecular weight branched self-immolative architecture, which acts as a triggerable chemically encoded timer for autonomous sequential release of two chemicals. Using a light-activated model liberating two distinct fluorophores, we generated a tunable spatially contrasted molecular distribution.

Wavelength-Selective Coupling and Decoupling of Polymer Chains via Reversible [2 + 2] Photocycloaddition of Styrylpyrene for Construction of Cytocompatible Photodynamic Hydrogels

Reversible photocycloaddition reactions have previously been employed in chemical cross-linking for the preparation of biomaterial scaffolds. However, the processes require activation by high-energy UV light, rendering them unsuitable for modification in biological environments. Here we demonstrate that the [2 + 2] photocycloaddition of styrylpyrene can be activated by visible light at λ = 400-500 nm, enabling rapid and effective conjugation and cross-linking of poly(ethylene glycol) (PEG) in water and under mild irradiation conditions (I = 20 mW cm^-2). Notably, the reversion of the cycloaddition can be triggered by low-energy UV light at λ = 340 nm, which allows for efficient cleavage of the dimer adduct. Using this wavelength-gated reversible photochemical reaction we are able to prepare PEG hydrogels and modulate their mechanical properties in a bidirectional manner. We also demonstrate healing of the fractured hydrogel by external light triggers. Furthermore, we show that human mesenchymal stem cells can be encapsulated within the gels with high viability post encapsulation. This photochemical approach is therefore anticipated to be highly useful in studies of cell mechanotransduction, with relevance to disease progression and tissue regeneration.