Interlocking the Catalyst: Thread versus Rotaxane-Mediated Enantiodivergent Michael Addition of Ketones to β-Nitrostyrene

Heterobifunctional rotaxanes featuring two chiral subunits - synthesis and application in asymmetric organocatalysis

Rotaxanes can serve as scaffolds for the generation of bifunctional catalysts. We have now generated acid-base functionalized rotaxanes featuring two chiral subunits. The mechanical bond leads to increased reaction rates and also to strongly altered enantioselectivites in comparison to the non-interlocked control catalysts.

Mechanically Planar-to-Point Chirality Transmission in [2]Rotaxanes

Herein we describe an effective transmission of chirality, from mechanically planar chirality to point chirality, in hydrogen-bonded [2]rotaxanes. A highly selective mono-N-methylation of one (out of four) amide N atom at the macrocyclic counterpart of starting achiral rotaxanes generates mechanically planar chirality. Followed by chiral resolution, both enantiomers were subjected to a base-promoted intramolecular cyclization, where their interlocked threads were transformed into new lactam moieties. As a matter of fact, the mechanically planar chiral information was effectively transferred to the resulting stereocenters (covalent chirality) of the newly formed heterocycles. Upon removing the entwined macrocycle, the final lactams were obtained with high enantiopurity.

One-Pot Synthesis of 3-Substiuted Indoles from 2-(2-Nitro-1-phenylethyl)cyclohexanone Derivatives

Herein, a one-pot synthesis of 3-substituted indoles from 2-(2-nitro-1-phenylethyl)cyclohexanone derivatives catalyzed by Pd/C is reported. The starting materials can be easily prepared by the reaction of substituted ketones and nitroalkenes. The facile experimental procedure comprises the treatment of 2-(2-nitro-1-phenylethyl)cyclohexanone derivatives with H₂ as a hydrogen donor in the presence of 10 mol % Pd/C. Subsequently, the exchange of H₂ with CH₂═CH₂ as a hydrogen acceptor affords a variety of 3-substituted indoles in high yields. The formation of intermediate nitrones is essential for a smooth reaction.

Parallel Allosteric Inhibition of Shuttling Motion and Catalysis in a Silver(I)-loaded [2]Rotaxane

A dynamic silver(I)-loaded [2]rotaxane shuttle (k₂₉₈ = 135 kHz) was converted allosterically into a conformationally restricted [2]rotaxane due to the creation of a bulky imine in the center of the axle component. Only the dynamic silver(I)-loaded [2]rotaxane was able to catalyze a 6-endo-cyclization reaction, whereas the static one was catalytically quiet. The mechanism of catalyst deactivation was elucidated.

Optimizing the Local Chemical Environment on a Bifunctional Helical Peptide Scaffold Enables Enhanced Enantioselectivity and Cooperative Catalysis

We describe a proof-of-concept study in which peptide-bound enamine and thiourea catalysts are used to facilitate the conjugate addition of cyclohexanone to nitroolefins. Our bifunctional peptide scaffold is modified to optimize the local environment around both catalysts to enhance both reactivity and enantioselectivity, affording selectivities of ≤95% ee. Circular dichroism, nuclear magnetic resonance nuclear Overhauser effect studies, and molecular dynamics simulations verify the helical structure of our catalyst in solution and the importance of the secondary structure in catalysis.

Anion-π Catalysis Enabled by the Mechanical Bond

We report a series of rotaxane‐based anion–π catalysts in which the mechanical bond between a bipyridine macrocycle and an axle containing an NDI unit is intrinsic to the activity observed, including a [3]rotaxane that catalyses an otherwise disfavoured Michael addition in >60 fold selectivity over a competing decarboxylation pathway that dominates under Brønsted base conditions. The results are rationalized by detailed experimental investigations, electrochemical and computational analysis.

Controlling catalyst activity, chemoselectivity and stereoselectivity with the mechanical bond

Mechanically interlocked molecules, such as rotaxanes and catenanes, are receiving increased attention as scaffolds for the development of new catalysts, driven by both their increasing accessibility and high-profile examples of the mechanical bond delivering desirable behaviours and properties. In this Review, we survey recent advances in the catalytic applications of mechanically interlocked molecules organized by the effect of the mechanical bond on key catalytic properties, namely, activity, chemoselectivity and stereoselectivity, and focus on how the mechanically bonded structure leads to the observed behaviour. Our aim is to inspire future investigations of mechanically interlocked catalysts, including those outside of the supramolecular community.

Modulating the Catalytic Activity by the Mechanical Bond: Organocatalysis with Polyamide [2]Rotaxanes bearing a Secondary Amino Function at the Thread

The modulation of the catalytic activity of degenerate succinamide-based [2]rotaxanes by changes at their macrocyclic component is disclosed herein. These systems, bearing an acyclic secondary amine function at the thread...

New horizons for catalysis disclosed by supramolecular chemistry

The adoption of a supramolecular approach in catalysis promises to address a number of unmet challenges, ranging from activity (unlocking of novel reaction pathways) to selectivity (alteration of the innate selectivity of a reaction, e.g. selective functionalization of C-H bonds) and regulation (switch ON/OFF, sequential catalysis, etc.). Supramolecular tools such as reversible association and recognition, pre-organization of reactants and stabilization of transition states upon binding offer a unique chance to achieve the above goals disclosing new horizons whose potential is being increasingly recognized and used, sometimes reaching the degree of ripeness for practical use. This review summarizes the main developments that have opened such new frontiers, with the aim of providing a guide to researchers approaching the field. We focus on artificial supramolecular catalysts of defined stoichiometry which, under homogeneous conditions, unlock outcomes that are highly difficult if not impossible to attain otherwise, namely unnatural reactivity or selectivity and catalysis regulation. The different strategies recently explored in supramolecular catalysis are concisely presented, and, for each one, a single or very few examples is/are described (mainly last 10 years, with only milestone older works discussed). The subject is divided into four sections in light of the key design principle: (i) nanoconfinement of reactants, (ii) recognition-driven catalysis, (iii) catalysis regulation by molecular machines and (iv) processive catalysis.

Mechanical bonding activation in rotaxane-based organocatalysts

Interlocked organocatalysts show enhanced catalytic performance when compared with their non-interlocked threads.The ring cooperatively activates the substrates, facilitating the formation and stabilization of catalytically active intermediates.

Site-to-site peptide transport on a molecular platform using a small-molecule robotic arm

Peptides attached to a cysteine hydrazide ‘transporter module’ are transported selectively in either direction between two chemically similar sites on a molecular platform, enabled by the discovery of new operating methods for a molecular transporter that functions through ratcheting. Substrate repositioning is achieved using a small-molecule robotic arm controlled by a protonation-mediated rotary switch and attachment/release dynamic covalent chemistry. A polar solvent mixtures were found to favour Z to E isomerization of the doubly-protonated switch, transporting cargo in one direction (arbitrarily defined as ‘forward’) in up to 85% yield, while polar solvent mixtures were unexpectedly found to favour E to Z isomerization enabling transport in the reverse (‘backward’) direction in >98% yield. Transport of the substrates proceeded in a matter of hours (compared to 6 days even for simple cargoes with the original system) without the peptides at any time dissociating from the machine nor exchanging with others in the bulk. Under the new operating conditions, key intermediates of the switch are sufficiently stabilized within the macrocycle formed between switch, arm, substrate and platform that they can be identified and structurally characterized by ¹H NMR. The size of the peptide cargo has no significant effect on the rate or efficiency of transport in either direction. The new operating conditions allow detailed physical organic chemistry of the ratcheted transport mechanism to be uncovered, improve efficiency, and enable the transport of more complex cargoes than was previously possible.

Peptides are transported in either direction between chemically similar sites on a molecular platform, substrate repositioning is achieved using a cysteine hydrazide transporter module and a small-molecule robotic arm controlled by a rotary switch.

Locking the Dynamic Axial Chirality of Biphenyl Crown Ethers through Threading

This paper describes the syntheses of [2]rotaxanes comprising 23- and 26-membered biphenyl crown ethers as the macrocyclic components and secondary ammonium ions as the dumbbell-shaped components, and the locking of the dynamic axial chirality of the biphenyl moieties in these structures. Chiral high-performance liquid chromatography (HPLC) revealed that our [2]rotaxane featuring the 26-membered crown ether racemized at room temperature, but the racemization of the [2]rotaxane featuring the 23-membered crown ether did not proceed at room temperature over a period of three days. After separation of the enantiomers of the [2]rotaxane incorporating the 23-membered crown ether through chiral HPLC, we studied its racemization at elevated temperature. The rate of stereoinversion in dimethylsulfoxide (a polar solvent) was faster than that in o-dichlorobenzene (a nonpolar solvent), and herein we discuss these kinetic parameters.

Cyclization of interlocked fumaramides into β-lactams: experimental and computational mechanistic assessment of the key intercomponent proton transfer and the stereocontrolling active pocket

A detailed mechanistic study of the diastereoselective CsOH-promoted cyclization of interlocked fumaramides to give β-lactams is described. The mechanistic analysis comprises the experimental evaluation of the structure-reactivity relationship for a wide range of fumaramides [2]rotaxanes (Hammet-plots), KIE studies with deuterium-labelled interlocked fumaramides and computational analysis of two alternative mechanistic pathways for the cyclization process. The obtained results confirm that: (a) the rate-determining step is the deprotonation of the N-benzyl group of the thread by the amidate group of the macrocycle generated by the external base, (b) the polyamide macrocycle plays an important role not only as activating element but also as the stereodifferenciating factor responsible for the observed diastereoselection and (c) the higher flexibility of the adamantyl core speeds up the cyclization process in diadamantyl-derived rotaxanes.

A mechanistic study of the diastereoselective cyclization of interlocked fumaramides to give β-lactams unveils the key factors for successfully taming the process.

Cross dehydrogenative C-O coupling catalysed by a catenane-coordinated copper(i)

Catalytic activity of copper(i) complexes supported by phenanthroline-containing catenane ligands towards a new C(sp³)–O dehydrogenative cross-coupling of phenols and bromodicarbonyls is reported. As the phenanthrolines are interlocked by the strong and flexible mechanical bond in the catenane, the active catalyst with an open copper coordination site can be revealed only transiently and the stable, coordinatively saturated Cu(i) pre-catalyst is quickly regenerated after substrate transformation. Compared with a control Cu(i) complex supported by non-interlocked phenanthrolines, the catenane-supported Cu(i) is highly efficient with a broad substrate scope, and can be applied in gram-scale transformations without a significant loss of the catalytic activity. This work demonstrates the advantages of the catenane ligands that provide a dynamic and responsive copper coordination sphere, highlighting the potential of the mechanical bond as a design element in transition metal catalyst development.

The use of a catenane-supported copper(i) complex for the cross dehydrogenative C–O coupling of phenols and bromodicarbonyls is described.

Enantiodivergent Cyclization by Inversion of the Reactivity in Ambiphilic Molecules

Inverting the reactivity of the functional groups in ambiphilic molecules provides a new synthetic strategy to perform late-stage enantiodivergence. Both enantiomers of the final compound can be obtained from a common chiral precursor. As a proof of concept, the synthesis of substituted five- and six-membered oxacycles is described. The key step is the cyclization of an ambiphilic linear precursor bearing a propargylic alcohol and an epoxide linked through an alkyl chain. Through a slight modification of these linear precursors and employing different reaction conditions, these functional groups can inverse their chemical reactivity, producing one enantiomer or another of the final product. This enantiodivergent cyclization involves three stereogenic centers that can undergo fully controlled retention or inversion of their configuration depending on the cyclization pathway that is activated. The cyclization provides late-stage enantiodivergence, enabling the synthesis of either enantiomers of the oxacycles from a common chiral substrate with total transfer of the enantiomeric purity.

Five-component, one-pot synthesis of an electroactive rotaxane comprising a bisferrocene macrocycle

The templated clipping of a ferrocene-grafted isophthalic acid derivative to encircle a hydrogen-bonding axle through the reaction with 1,4-bis(aminomethyl)benzene is described. The constituent electroactive macrocycle of the resultant [2]rotaxane is a homologue of the versatile benchmark tetraamide variant developed by Leigh and co-workers. The relative templating effect of different hydrogen-bonding motifs in rotaxane and pseudorotaxane generation is compared, with yields varying from 0 to 41%. The electrochemical properties and single crystal X-ray structure of a doubly ferrocene-decorated [2]rotaxane are further reported.

Functionalized Macrocycles in Supramolecular Organocatalysis

Supramolecular organocatalysis has emerged as a novel research field in the context of homogeneous catalysis. In particular, the use of functionalized macrocycles as supramolecular catalysts is highly promising, as these systems are oftentimes easily accessible and offer distinct advantages in catalysis. Macrocyclic catalysts can provide defined binding pockets, such as hydrophobic cavities, and can thus create a reaction microenvironment for catalysis. In addition, macrocycles can offer a preorganized arrangement of functional groups, such as binding sites or catalytically active groups, thus enabling a defined and possibly multivalent binding and activation of substrates. The aim of this Minireview is to provide an overview of recent advances in the area of supramolecular organocatalysis based on functionalized macrocycles (including cyclodextrins, calixarenes, and resorcinarenes), with a focus on those examples where certain catalytically active groups (such as hydrogen bond donors/acceptors, Brønsted acid or base groups, or nucleophilic units) are present in or have been installed on the macrocycles.

Enhancing the selectivity of prolinamide organocatalysts using the mechanical bond in [2]rotaxanes

The synthesis of a pair of switchable interlocked prolinamides and their use as organocatalysts in three different enamine-activated processes are reported. A diacylaminopyridine moiety was incorporated into the thread for directing [2]rotaxane formation further allowing the association of complementary small molecules. The rotaxane-based systems were tested as organocatalysts in asymmetric enamine-mediated processes, revealing a significantly improved catalytic ability if compared with the non-interlocked thread. The presence of an electron-withdrawing nitro group at the macrocycle helps to achieve high conversions and enantioselectivities. These systems are able to interact with N-hexylthymine as a cofactor to form supramolecular catalysts displaying a divergent catalytic behaviour. The presence or absence of the cofactor controls the chemoselectivity in competitive reactions.

The mechanical bonding and the cofactor assembly in interlocked prolinamide-based organocatalysts upgrade enamine-type transformations by increasing their yields and enantio- and chemo-selectivities.

Heterobifunctional Rotaxanes for Asymmetric Catalysis

Heterobifunctional rotaxanes serve as efficient catalysts for the addition of malonates to Michael acceptors. We report a series of four different heterobifunctional rotaxanes, featuring an amine‐based thread and a chiral 1,1′‐binaphthyl‐phosphoric‐acid‐based macrocycle. High‐level DFT calculations provided mechanistic insights and enabled rational catalyst improvements, leading to interlocked catalysts that surpass their non‐interlocked counterparts in terms of reaction rates and stereoselectivities.

A [2]Rotaxane-Based Circularly Polarized Luminescence Switch

A rotaxane-based molecular shuttle has been synthesized in which the switching of the position of a fluorescent macrocycle on the thread turns “on” or “off” the circularly polarized luminescence (CPL) of the system while maintaining similar fluorescence profiles and quantum yields in both states. The chiroptical activity relies on the chiral information transfer from an ammonium salt incorporating d- or l-phenylalanine residues as chiral stereogenic covalent units to an otherwise achiral crown ether macrocycle bearing a luminescent 2,2′-bipyrene unit when they interact through hydrogen bonding. Each enantiomeric thread induces CPL responses of opposite signs on the macrocycle. Upon addition of base, the switching of the position of the macrocycle to a triazolium group disables the chiral information transfer to the macrocycle, switching “off” the CPL response. The in situ switching upon several acid/base cycles is also demonstrated.

Dynamic Control of Chiral Space Through Local Symmetry Breaking in a Rotaxane Organocatalyst

We report on a switchable rotaxane molecular shuttle that features a pseudo-meso 2,5-disubstituted pyrrolidine catalytic unit on the axle whose local symmetry is broken according to the position of a threaded benzylic amide macrocycle. The macrocycle can be selectively switched (with light in one direction; with catalytic acid in the other) with high fidelity between binding sites located to either side of the pyrrolidine unit. The position of the macrocycle dictates the facial bias of the rotaxane-catalyzed conjugate addition of aldehydes to vinyl sulfones. The pseudo-meso non-interlocked thread does not afford significant selectivity as a catalyst (2-14 % ee), whereas the rotaxane affords selectivities of up to 40 % ee with switching of the position of the macrocycle changing the handedness of the product formed (up to 60 % Δee).

Absolute Configurations of Topologically Chiral [2]Catenanes and the Acid/Base-Flippable Directions of Their Optical Rotations

The absolute configurations of the two enantiomers of a topologically chiral [2]catenane were determined unambiguously based on HPLC resolution and X-ray crystal analysis. Although structurally dissimilar to simple amino acids, the optical rotations of these separated [2]catenanes share the Clough-Lutz-Jirgensons behavior of amino acids: the optical rotation flips direction in the presence of acid and base, the first example of such behavior for a mechanically interlocked topologically chiral catenane.