Bioactive Khadi Cotton Fabric by Functional Designing and Immobilization of Nanosilver Nanogels

Alginate based biomaterials for hemostatic applications: Innovations and developments

Development of the efficient hemostatic materials is an essential requirement for the management of hemorrhage caused by the emergency situations to avert most of the casualties. Such injuries require the use of external hemostats to facilitate the immediate blood clotting. A variety of commercially available hemostats are present in the market but most of them are associated with limitations such as exothermic reactions, low biocompatibility, and painful removal. Thus, fabrication of an ideal hemostatic composition for rapid blood clot formation, biocompatibility, and antimicrobial nature presents a real challenge to the bioengineers. Benefiting from their tunable fabrication properties, alginate-based hemostats are gaining importance due to their excellent biocompatibility, with >85 % cell viability, high absorption capacity exceeding 500 %, and cost-effectiveness. Furthermore, studies have estimated that wounds treated with sodium alginate exhibited a blood loss of 0.40 ± 0.05 mL, compared to the control group with 1.15 ± 0.13 mL, indicating its inherent hemostatic activity. This serves as a solid foundation for designing future hemostatic materials. Nevertheless, various combinations have been explored to further enhance the hemostatic potential of sodium alginate. In this review, we have discussed the possible role of alginate based composite hemostats incorporated with different hemostatic agents, such as inorganic materials, polymers, biological agents, herbal agents, and synthetic drugs. This article outlines the challenges which need to be addressed before the clinical trials and give an overview of the future research directions.

Preparation of functional and reactive nanosilver nanogels using oxidized carboxymethyl cellulose

The designing of functional and reactive nanosilver has been carried out by in-situ reduction of silver nitrate using oxidized carboxymethyl cellulose (OCMC). The reduction process is also accompanied by the stabilization of nanoparticles using the OCMC polymer chain, leading to the formation of a structure where nanosilver is entrapped within OCMC gel. The silver nanogels characterized using transmission electron microscopy (TEM) are found to be ∼22 nm. By virtue of the presence of dialdehyde functionality around the silver nanogels, they have the ability to react with a polymer having a complementary functional group. The nanogels have exhibited prominent antimicrobial activity against both gram-negative and gram-positive bacteria. It has been observed that a 0.3 mM concentration of silver nanogel is active in inhibiting bacterial growth. The antibacterial activity of the synthesized Ag nanogels was dose-dependent, with 99.9 % of E. coli and S. aureus destroyed within 5 h at a concentration of 0.4 mM Ag nanogels. The nanogels disrupted the bacterial cell wall and generated reactive oxygen species inside the cell, which resulted in cell death. This investigation provides a very interesting application as a coating for biomedical implants and devices.

Cleaner pathway for developing bioactive textile materials using natural dyes: a review

Bioactive textile materials are a promising field in the development of functional textiles. The integration of bioactive compounds, such as natural dyes, into textiles offers a range of benefits, including UV protection, anti-microbial properties, and insect repellency. Natural dyes have been shown to have bioactivity, and their integration into textiles has been extensively studied. The application of natural dyes on textile substrates will be an advantage for their inherent functional properties along with their non-toxic and eco-friendly nature. This review addresses the effect of natural dyes on surface modification of most used natural and synthetic fibers and its subsequent effects on their anti-microbial, UV protection and insect repellent properties with natural dyes. Natural dyes have proved to be environmentally friendly in an attempt to improve bioactive functions in textile materials. This review provides a clear view of sustainable resources for the dyeing and finishing of textiles to develop a cleaner pathway of bioactive textiles using natural dyes. Furthermore, the dye source, advantages and disadvantages of natural dye, main dye component, and chemical structure are listed. However, there is still a need for interdisciplinary research to further optimize the integration of natural dyes into textiles and to improve their bioactivity, biocompatibility, and sustainability. The development of bioactive textile materials using natural dyes has the potential to revolutionize the textile industry and to provide a range of benefits to consumers and society.

Development of sodium alginate/glycerol/tannic acid coated cotton as antimicrobial system

Present study aims at developing antimicrobial cotton gauze by dip coating of sodium alginate (SA), glycerol (Gly) and tannic acid (TA) blend. SA blends were prepared with varying concentration of glycerol in the range of 10-40 %. Blended films were fabricated and characterized by Fourier transform-infrared (FTIR) spectroscopy, X-ray diffraction (XRD), tensile studies, and contact angle analysis. The mechanical behavior of films indicated significant decrease in the tensile strength and modulus with the increase in the glycerol content due to the plasticization effect. The hydrophilicity of the blend films increased with increase in the glycerol content. TA was added to the blend as an antimicrobial agent. These blends were coated on the cotton gauze by dip coating method and their characterizations were carried out by the scanning electron microscopy (SEM) which revealed a smooth coating of SA:Gly:TA blend on cotton gauze. Antimicrobial analysis of TA coated gauzes was carried out which showed >95 % viable colony reduction against E. coli and S. aureus. Cytocompatibility studies indicated excellent cell-compatible activity. These results implicated that such coated gauzes are promising candidate that hold the great potential to be utilized as infection-resistant material in the health care sector.

Multifunctional coating of cotton fabric via the assembly of amino-quinone networks with polyamine biomacromolecules and dopamine quinone

Functional textiles with antibacterial properties and UV protection are essential for human health. However, the process of functional modification of textiles is usually done with the help of chemical cross-linking agents to improve the bonding fastness of functional finishing agents on textiles. The use of chemical cross-linking agents is not eco-friendly enough and is prone to chemical waste. In this study, some highly reactive polyamine biomolecules were combined with dopamine quinone, a super adhesive bionic material, to spontaneously construct amino-quinone networks (AQNs) coatings on the surface of cotton fabrics without the addition of chemical crosslinkers. The amino/quinone compounds (A/Q) self-crosslinking reaction is achieved by Michael addition and Schiff base reaction between the quinone group in dopamine quinone and the amino group in chitosan (CTS), chitooligosaccharide (COS) or ԑ-polylysine (ԑ-PL). The combination of polyamines and dopamine quinone during the cotton finishing process imparts antibacterial and UV protection to cotton fabric. The results showed that the AQNs coating modified fabrics had superb UV protection and antibacterial rates of over 96% against both E. coli and S. aureus. In addition, the AQNs coating modified fabrics had good resistance to washing and mechanical abrasion. This study proposes that self-assembled amino-quinone network multifunctional coatings of dopamine quinone and polyamine biomolecules are of guiding significance for the development of environmentally friendly bio-based materials.

Preparation of thyme oil loaded κ-carrageenan-polyethylene glycol hydrogel membranes as wound care system

The present study is aimed at fabricating thyme oil loaded hydrogel membranes composed of κ-carrageenan (CG) and polyethylene glycol (PEG), which can provide moist environment and prevent infections for rapid wound healing. Membranes were prepared with different amounts of PEG via solvent casting technique under ambient conditions. Physicochemical properties of CG-PEG membranes as a function of the PEG content were investigated. The surface morphology of membranes displayed smoother surfaces with increasing PEG content up to 40%. In addition, the interaction of PEG with CG polymer chains was evaluated in terms of Free and bound PEG fraction within the membrane matrix. Furthermore, thyme oil (TO) was added to enhance the antibacterial properties of CG-PEG membranes. These membranes showed >95% antimicrobial activity against both gram-positive and gram-negative bacteria depending on the TO content. Suggesting the great potential of these membranes as a strong candidate for providing an effective antimicrobial nature in human healthcare.