Nanostructured PEDOT Coatings for Electrode-Neuron Integration

Bioaugmented design and functional evaluation of low damage implantable array electrodes

Implantable neural electrodes are key components of brain-computer interfaces (BCI), but the mismatch in mechanical and biological properties between electrode materials and brain tissue can lead to foreign body reactions and glial scarring, and subsequently compromise the long-term stability of electrical signal transmission. In this study, we proposed a new concept for the design and bioaugmentation of implantable electrodes (bio-array electrodes) featuring a heterogeneous gradient structure. Different composite polyaniline-gelatin-alginate based conductive hydrogel formulations were developed for electrode surface coating. In addition, the design, materials, and performance of the developed electrode was optimized through a combination of numerical simulations and physio-chemical characterizations. The long-term biological performance of the bio-array electrodes were investigated in vivo using a C57 mouse model. It was found that compared to metal array electrodes, the surface charge of the bio-array electrodes increased by 1.74 times, and the impedance at 1 kHz decreased by 63.17 %, with a doubling of the average capacitance. Long-term animal experiments showed that the bio-array electrodes could consistently record 2.5 times more signals than those of the metal array electrodes, and the signal-to-noise ratio based on action potentials was 2.1 times higher. The study investigated the mechanisms of suppressing the scarring effect by the bioaugmented design, revealing reduces brain damage as a result of the interface biocompatibility between the bio-array electrodes and brain tissue, and confirmed the long-term in vivo stability of the bio-array electrodes.

Hybrid conducting polymer films promote neural outgrowth and neural-electrode integration in vitro

The increase incidence of neurological disorders arising from an aging population has accelerated research into electrical medicine approaches as promising pretreatments options. Achieving chronic therapeutic electrical stimulation is dependent on an optimal charge delivery capacity of a stimulating device. In particular, instability at the electrode-tissue interface is frequently derived from a physicomechanical mismatch in the mechanical properties of the rigid, smooth surface of metallic electrodes and the soft nature of neural tissues, leading to perielectrode scarring, a subsequent reduction in charge transfer capability and decreased stimulation efficacy. This study explores the modification of neural electrodes using electroactive materials to enhance their performance. Specifically, applying sequentially two different conducting polymers, namely polyaniline and poly(3,4-ethylenedioxythiophene), which induced a significant increase in the active surface area of an electrode, moderate hydrophilicity (49 ± 7o), capacitance (19.9 mC/cm2), low impedance (165 ± 6 Ω at 1 kHz), and a fibrillar morphology. Cell culture studies with rat-derived embryonic ventral mesencephalon cells revealed that hybrid conducting polymer coatings supported neural outgrowth and cell adhesion in vitro.

Protective Properties of Silane Composite Coatings Modified with Poly(3,4-ethylenedioxythiophene) with Heteropolyacid on X20Cr13 and 41Cr4 Steel

This paper describes the methodology of the preparation and analyses of the structure and anticorrosion properties of silane coatings modified with poly(3,4-ethylenedioxythiophene) (PEDOT) with phosphododecamolybdic acid (PMo12). Protective coatings, consisting of vinyltrimethoxysilane (VTMS), PEDOT powder with PMo12 admixture (at different concentrations), and ethanol, were deposited on X20Cr13 and 41Cr4 steels by immersion. The physicochemical properties of these silane coatings (e.g., surface morphology, thickness, roughness, and adhesion to the substrate) were elucidated using a digital microscope, a Fourier transform infrared spectrophotometer with attenuated total reflectance, and various electrochemical diagnostic techniques. Protective properties were assessed in acidified sulfate solutions with and without chloride ions (pH 2). Experimental results have shown that this coating displayed the effective protection of steel against general and pitting corrosion, stabilized the corrosion potential in the passive state, and provided barrier protection.

Easy-to-Engineer Flexible Nanoelectrode Sensor from an Inexpensive Overhead Projector Sheet for Sweat Neuropeptide-Y Detection

In this paper, we report an inexpensive and easy-to-engineer flexible nanobiosensor electrode platform by exploring a nonconductive overhead projector (OHP) sheet for sweat Neuropeptide-Y (NPY) detection, a potential biomarker for stress, cardiovascular regulation, appetite, etc. We converted a nonconductive OHP sheet into a conductive nanobiosensor electrode platform with a hybrid polymerization method, which consists of interfacial polymerization of pyrrole and a template-free electropolymerization technique to decorate the electrode platform with poly(EDOT-COOH-co-EDOT-EG3) nanotubes. The selection of poly(EDOT-COOH) features an easy conjugation of NPY antibody (NPY-Ab) through EDC/Sulfo-NHS coupling chemistry, while poly(EDOT-EG3) is best known to reduce nonspecific binding of biomolecules. The antibody conjugation on the polymer surface was characterized by a quartz crystal microbalance, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and chronoamperometry techniques. The OHP nanosensor platform exhibited the successful detection of NPY analyte through a chronoamperometry method in phosphate-buffered saline with a wide range of concentrations from 1 pg/mL to 1 μg/mL with a limit of detection of 0.68 pg/mL having good linearity (R2 = 0.9841). The sensor platform exhibited excellent stability, reproducibility, repeatability, and a shelf-life of 13 days. Furthermore, the sensor showed superior selectivity to a 100 pg/mL NPY analyte among other interfering compounds such as tumor necrosis factor α, cortisol, and Interleukin-6. The clinical practicality of the sensor was confirmed through the detection of 100 pg/mL NPY spiked artificial perspiration, highlighting the possibility of integrating the sensor platform to wearable healthcare applications.

Synthesis of PEDOT:PSS Brushes Grafted from Gold Using ATRP for Increased Electrochemical and Mechanical Stability

We report PEDOT:PSS brushes grafted from gold using surface-initiated atom-transfer radical polymerization (SI-ATRP) which demonstrate significantly enhanced mechanical stability against sonication and electrochemical cycling compared to spin-coated analogues as well as lower impedances than bare gold at frequencies from 0.1 to 105 Hz. These results suggest SI-ATRP PEDOT:PSS to be a promising candidate for use in microelectrodes for neural activity recording. Spin-coated, electrodeposited, and drop-cast PEDOT:PSS have already been shown to reduce impedance and improve biocompatibility of microelectrodes, but the lack of strong chemical bonds of the physisorbed polymer film to the metal leads to disintegration under required operational stresses including cyclic mechanical loads, abrasion, and electrochemical cycling. Rather than modifying the metal electrode or introducing cross-linkers or other additives to improve the stability of the polymer film, this work chemically tethers the polymer to the surface, offering a simple, scalable solution for functional bioelectronic interfaces.

Simultaneous Presentation of Dexamethasone and Nerve Growth Factor via Layered Carbon Nanotubes and Polypyrrole to Interface Neural Cells

The implantation of neural electrodes usually induces acute and chronic inflammation, which can result in the formation of glial scars encapsulating the implanted electrodes and the loss of neurons near the active electrode sites. Local presentation of anti-inflammatory drugs or neural protective factors has been evidenced as an effective strategy to modulate inflammatory responses and promote electrode-neuron integration. Here, a novel delivery system for the simultaneous presentation of both anti-inflammatory drugs (dexamethasone, Dex) and nerve-growth-promoting factors (nerve growth factor, NGF) from the electrode sites was developed via layer-structured carbon nanotubes and conductive polymers. The modified electrodes exhibited higher charge storage capacitance and lower electrochemical impedance compared to unmodified electrodes and electrodes coated with polypyrrole/Dex. Dex released from the functional coating under controlled electrochemical stimulation was able to inhibit the lipopolysaccharide-induced secretion or mRNA transcription of inflammatory cytokines, including nitric oxide, TNF-α, and IL-6 in RAW264.7 cells, and control the activation of cultured astrocytes. In addition, the functional coatings did not show a toxic effect on PC12 cells and primary neural cells but exhibited promoted activities on the adhesion, growth, and neurite extension of neural cells.

Toward a New Generation of Bio-Scaffolds for Neural Tissue Engineering: Challenges and Perspectives

Neural tissue engineering presents a compelling technological breakthrough in restoring brain function, holding immense promise. However, the quest to develop implantable scaffolds for neural culture that fulfill all necessary criteria poses a remarkable challenge for material science. These materials must possess a host of desirable characteristics, including support for cellular survival, proliferation, and neuronal migration and the minimization of inflammatory responses. Moreover, they should facilitate electrochemical cell communication, display mechanical properties akin to the brain, emulate the intricate architecture of the extracellular matrix, and ideally allow the controlled release of substances. This comprehensive review delves into the primary requisites, limitations, and prospective avenues for scaffold design in brain tissue engineering. By offering a panoramic overview, our work aims to serve as an essential resource, guiding the creation of materials endowed with bio-mimetic properties, ultimately revolutionizing the treatment of neurological disorders by developing brain-implantable scaffolds.

Nitrogen-doped graphene-poly(hydroxymethylated-3,4-ethylenedioxythiophene) nanocomposite electrochemical sensor for ultrasensitive determination of luteolin

An ultrasensitive luteolin electrochemical sensor was constructed by co-electropolymerization of nitrogen-doped graphene (N-GR) and hydroxymethylated-3,4-ethylenedioxythiophene (EDOT-MeOH) using cyclic voltammetry (CV). Because of the synergistic effects of the large surface area, superior electrical conductivity, and large amount of chemically active sites of N-GR together with the satisfactory water solubility and high conductivity of poly(hydroxymethylated-3,4-ethylenedioxythiophene) (PEDOT-MeOH), the N-GR-PEDOT-MeOH nanocomposite sensor exhibited high electrochemical sensitivity towards luteolin with a wide linear range of 0.005-10.06 μM and low detection limit of 0.05 nM. Satisfactory reproducibility, selectivity, and stability were exhibited by this electrochemical sensor. Additionally, the proposed sensor was employed for trace-level analysis of luteolin in actual samples of herbal medicines (thyme (Thymus vulgaris L.), honeysuckle (Lonicera japonica Thunb.), and Tibetan Duyiwei (Lamiophlomis rotata (Benth.) Kudo)) with satisfactory results.

Recent advances in the aqueous applications of PEDOT

Water is ubiquitous in life - from making up the majority of the Earth's surface (by area) to over half of the human body (by weight). It stands to reason that materials are likely to contact water at some point during their lifetime. In the specific case of sensors however, there is a need to consider materials that display stable function while immersed in aqueous applications. This mini-review will discuss the most recent advances (2018 to 2021) in the application of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) in aqueous environments. At its heart, the use of PEDOT in aqueous applications relies on nanoscale understanding and/or nanoengineered structures and properties. This enables their use in water-based settings such as within the human body or buried in agricultural soils.