Cuprous Oxide Nanoparticles Decorated Fabric Materials with Anti-biofilm Properties

Antimicrobial Activity of Morphology-Controlled Cu2O Nanoparticles: Oxidation Stability under Humid and Thermal Conditions

Metal oxides can be used as antimicrobial agents, especially since they can be fabricated into various forms such as films, masks, and filters. In particular, the durability of antimicrobial agents and the duration of their antimicrobial activity are important factors that determine their suitability for a specific purpose. These factors are related to the morphology and size of particles. The metal oxide Cu2O is often oxidized to CuO in various conditions, which reduces its antimicrobial activity. This study focused on the oxidation of nanoparticles of Cu2O with three morphologies, namely, spherical, octahedral, and cubic morphologies, in excessively humid and excessive-thermal environments for a specific duration and the antimicrobial activity of the NPs. Cu2O nanoparticles were prepared using the chemical reduction method, and their morphology could be varied by adjusting the molar ratio of OH- to Cu2+ and changing the reducing agent. It was found that cubic Cu2O was the most stable against oxidation and had the smallest reduction in antimicrobial activity. This study examined the antimicrobial activity and the oxidation stability of Cu2O NPs with different morphologies but similar particle sizes.

Zirconium-Coated β-Cyclodextrin Nanomaterials for Biofilm Eradication

Under alkaline treatment, zirconyl chloride (ZrOCl2.8H2O) became a zirconia gel and formed a stable complex with beta-cyclodextrin (βCD). This complex was highly active in reactive oxygen species (ROS) formation via H2O2 decomposition. Its surface with numerous hydroxyl groups acts as an ionic sponge to capture the charged reaction intermediates, including superoxide (O2-•) and the hydroxyl radical (•OH). ROS, especially •OH radicals, are harmful to living microorganisms because of their kinetic instability, high oxidation potential, and chemical nonselectivity. Therefore, •OH radicals can engage in fast reactions with virtually any adjacent biomolecule. With H2O2, the complex with cationic and hydrophobic moieties interacted with the anionic bacterial membrane of two Gram-positive (Staphylococcus aureus and S. epidermidis) and two Gram-negative (Escherichia coli and Klebsiella pneumoniae) strains. The Zr-βCD-H2O2 also eradicated more than 99% of the biofilm of these four pathogens. Considering the difficult acquisition of resistance to the oxidation of •OH, the results suggested that this βCD-based nanomaterial might be a promising agent to target both drug-resistant pathogens with no cytotoxicity and exceptional antimicrobial activity.

Effectiveness of metal and metal oxide nanoparticles against bacterial biofilms: Perspectives and limitations

In the last few years, there has been a necessary demand in the pharmaceutical industries for finding a treatment against biofilms formed by different bacterial species. We are aware of the fact that classical processes, which are already there for the removal of bacterial biofilms gives a very low efficiency and consequently antimicrobial resistance makes it even worse. To cope up with the cited problems, scientists from the past few years are inclining toward various types of nanoparticle based treatment procedures as a pharmaceutical agent against bacterial biofilms. Nanoparticles are known for their extremely efficient antimicrobial properties. The current review gives a description of different types of metal oxide nanoparticles and their antibiofilm properties. It also shows a comparative analysis of the nanoparticles and depicts the efficiency rates of biofilm degradation in each of them. It explains the mechanism of the nanoparticles through which the disintegration of bacterial biofilm is carried out. Lastly, the review throws light upon the limitations of different nanoparticles, their safety issues, the mutagenicity, genotoxicity concerns, and toxicity hazards caused by them.

Long-range hydrophobic force enhanced interfacial photocatalysis for the submerged surface anti-biofouling

Developing anti-biofouling and anti-biofilm techniques is of great importance for protecting water-contact surfaces. In this study, we developed a novel double-layer system consisting of a bottom immobilized TiO2 nanoflower arrays (TNFs) unit and an upper superhydrophobic (SHB) coating along with the assistance of nanobubbles (NBs), which can significantly elevate the interfacial oxygen level by establishing the long-range hydrophobic force between NBs and SHB and effectively maximize the photocatalytic reaction brought by the bottom TNFs. The developed NBs-SHB/TNFs system demonstrated the highest bulk chemical oxygen demand (COD) reduction efficiency at approximately 80% and achieved significant E. coli and Chlorella sp. inhibition efficiencies of 5.38 and 1.99 logs. Meanwhile, the system showed a sevenfold higher resistance to biofilm formation when testing in a wastewater matrix using a wildly collected biofilm seeding solution. These findings provide insights for implementing nanobubble-integrated techniques for submerged surface protection.

Waste-Derived Sustainable Fluorescent Nanocarbon-Coated Breathable Functional Fabric for Antioxidant and Antimicrobial Applications

Hospital-acquired (nosocomial) infections account for the majority of adverse health effects during care delivery, placing an immense financial strain on healthcare systems around the world. For the first time, the present article provides evidence of a straightforward pollution-free technique to fabricate a heteroatom-doped carbon dot immobilized fluorescent biopolymer composite for the development of functional textiles with antioxidant and antimicrobial properties. A simple, facile, and eco-friendly approach was devised to prepare heteroatom-doped carbon dots from waste green tea and a biopolymer. The carbon dots showed an excitation-dependent emission behavior, and the XPS data unveiled that they are co-doped with nitrogen and sulfur. A facile physical compounding strategy was adopted to fabricate a carbon dot reinforced biopolymeric composite followed by immobilization onto the textile. The composite textiles revealed excellent antioxidant activity, determined by 1,1-diphenyl-2-picrylhydrazyl (>80%) and 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid assays (>90%). The results of the disc diffusion assay indicated that the composite textiles substantially inhibited the growth of both tested bacteria Escherichia coli and Bacillus subtilis with increasing coating cycles. The time-dependent antibacterial experiments revealed that the nanocomposite can inhibit significant bacterial growth within a few hours. The present study could open up the possibility for the commercialization of inexpensive smart textile substrates for the prevention of microbial contamination used for the medical and healthcare field.

Enhanced UV Protection, Heavy Metal Detection, and Antibacterial Properties of Biomass-Derived Carbon Dots Coated on Protective Fabrics

Carbon dots (CDs) were simply prepared from charcoal by hydrothermal processing at 180 °C for 15 h without any chemicals. The as-prepared CDs with an average diameter of 5 ± 6 nm exhibited a predominant absorption peak at 290 nm, corresponding to the n to π* transition of the oxygen functional groups (C═O) and the free amine functional groups (-NH₂). The resulting CDs were then incorporated into cotton and polyester by facile ultrasonication for 1 h. The obtained CD-coated fabrics were first evaluated for their UV-blocking capability and then for their antibacterial properties against two model pathogens: Gram-negative E. coli and Gram-positive S. aureus. Both cotton and polyester showed no UV protection at 280 or 380 nm; conversely, cotton or polyester decorated with CDs exhibited a UV blocking ratio of 82-98%. The CD-coated fabrics showed 100% antibacterial activities against E. coli and S. aureus, whereas the pristine fabrics showed no effect. The CDs/fabrics could adsorb Hg²⁺ and Fe³⁺, resulting in a drastic fluorescence quenching. As such, this distinct feature was exploited for the removal and detection of these two ions with the limits of detection of 55and 72 μM, respectively.