Surface Engineering of Phenylboronic Acid-Functionalized Poly(3,4-ethylenedioxythiophene) for Fast Responsive and Sensitive Glucose Monitoring

Recent advances in PEDOT/PProDOT-derived nano biosensors: engineering nano assemblies for fostering advanced detection platforms for biomolecule detection

With the recent unprecedented emergence of a global pandemic, unknown diseases and new metabolic patterns expressing serious health issues, the requirement to develop new diagnostic tools, therapeutic solutions, and healthcare and environmental monitoring systems are significantly higher in the present situation. Considering that high sensitivity, selectivity, stability and a low limit of detection (LOD) are inevitable requirements for an ideal biosensor, the class of conducting polymers of poly(3,4-ethylenedioxythiophene) (PEDOT) and recently poly(3,4-propylenedioxythiophene) (PProDOT) materials have been demonstrated to be promising candidates for designing sensor devices. Nanostructure engineering of these polymeric materials with tunable surface properties and side chain functionalization to enable sensor probe conjugation combined with signal amplification devices such as OECTs and OFETs can fulfil the requirements of next-generation smart nano-biosensors. In this review, we analyze recent reports on PEDOT/PProDOT nanostructures and nanocomposites for developing nano-biosensors and their application in the detection of different biomarkers, environmental, toxicology, marine and aquatic monitoring, forensic and illicit drug detection, etc. In addition, we discuss the challenges associated with the design of PEDOT/PProDOT nano-biosensors and future perspectives on the exploration of novel sensor platforms, particularly PProDOT derivatives for bioelectronics and novel design strategies for next-generation smart nano-biosensors.

Single-Component Electroactive Polymer Architectures for Non-Enzymatic Glucose Sensing

Organic mixed ionic-electronic conductors (OMIECs) have emerged as promising materials for biological sensing, owing to their electrochemical activity, stability in an aqueous environment, and biocompatibility. Yet, OMIEC-based sensors rely predominantly on the use of composite matrices to enable stimuli-responsive functionality, which can exhibit issues with intercomponent interfacing. In this study, an approach is presented for non-enzymatic glucose detection by harnessing a newly synthesized functionalized monomer, EDOT-PBA. This monomer integrates electrically conducting and receptor moieties within a single organic component, obviating the need for complex composite preparation. By engineering the conditions for electrodeposition, two distinct polymer film architectures are developed: pristine PEDOT-PBA and molecularly imprinted PEDOT-PBA. Both architectures demonstrated proficient glucose binding and signal transduction capabilities. Notably, the molecularly imprinted polymer (MIP) architecture demonstrated faster stabilization upon glucose uptake while it also enabled a lower limit of detection, lower standard deviation, and a broader linear range in the sensor output signal compared to its non-imprinted counterpart. This material design not only provides a robust and efficient platform for glucose detection but also offers a blueprint for developing selective sensors for a diverse array of target molecules, by tuning the receptor units correspondingly.

A sensitive non-enzymatic dual-conductive biosensor for continuous glucose monitoring

BACKGROUND

Diabetes and diabetic wound management have always been urgent issues for global healthcare. In the demand for blood glucose monitoring and wound management, phenylboronic acid (PBA)-based glucose biosensors are effective assistance due to their excellent glucose specificity, high sensitivity, and response stability. Nevertheless, PBA-based glucose biosensors still have challenges in terms of wide linearity and large deformation requirements. Therefore, it is necessary to develop PBA-based glucose biosensors with satisfactory mechanical properties, high response sensitivity, excellent stability, and wide linearity.

RESULTS

In this work, a glucose-responsive PBA-based biosensor was successfully synthesized for the first time. The sensor materials exhibited excellent mechanical properties with an elongation at break reached up to 1000%, and the healing efficiency was over 90% within 30 min at 45 °C. Furthermore, the biosensor exhibited exceptional electromechanical responsiveness, stability, high sensitivity, and wide linearity due to the specificity of phenylboronic acid to glucose and the construction of a special HCNT/PEDOT:PSS dual conductive structure. In addition, the assembled biosensor displayed remarkable glucose, pH and temperature responses, exhibiting a linear response to glucose concentration range from 0.20 mM to 2.0 mM, with a sensitivity coefficient of 47.11 mA mM-1 and regression coefficient of 0.942. Moreover, the sensor materials showed satisfactory cytocompatibility, hemocompatibility, and antibacterial properties against Escherichia coli and Staphylococcus aureus.

SIGNIFICANCE

For the first time, a dual conductive structural glucose biosensor based on PBA-based copolymer was synthesized. In addition to excellent glucose sensitivity and response stability, the biosensor has a wide linearity range, excellent self-healing property, and satisfactory mechanical performance. As a promising substitute for non-enzymatic glucose biosensors, this new material with special structure and characteristics would also be beneficial to wound management in diabetic patients.

Phenylboronic acid conjugated poly(3,4-ethylenedioxythiophene) (PEDOT) coated Ag dendrite for electrochemical non-enzymatic glucose sensing

The fern leaf-like surface topography of poly(EDOT-PBA)/Ag/Cu/GCE increases the specific surface area of the sensor, thereby enhancing the glucose sensing performance.

Zwitterionic Conducting Polymers: From Molecular Design, Surface Modification, and Interfacial Phenomenon to Biomedical Applications

Conducting polymers (CPs) have gained attention as electrode materials in bioengineering mainly because of their mechanical softness compared to conventional inorganic materials. To achieve better performance and broaden bioelectronics applications, the surface modification of soft zwitterionic polymers with antifouling properties represents a facile approach to preventing unwanted nonspecific protein adsorption and improving biocompatibility. This feature article emphasizes the antifouling properties of zwitterionic CPs, accompanied by their molecular synthesis and surface modification methods and an analysis of the interfacial phenomenon. Herein, commonly used methods for zwitterionic functionalization on CPs are introduced, including the synthesis of zwitterionic moieties on CP molecules and postsurface modification, such as the grafting of zwitterionic polymer brushes. To analyze the chain conformation, the structure of bound water in the vicinity of zwitterionic CPs and biomolecule behavior, such as protein adsorption or cell adhesion, provide critical insights into the antifouling properties. Integrating these characterization techniques offers general guidelines and paves the way for designing new zwitterionic CPs for advanced biomedical applications. Recent advances in newly designed zwitterionic CP-based electrodes have demonstrated outstanding potential in modern biomedical applications.

Recent Advances and Biomedical Applications of Peptide-Integrated Conducting Polymers

Conducting polymers (CPs) are of great interests to researchers around the world in biomedical applications owing to their unique electrical and mechanical properties. Besides, they are easy to fabricate and have long-term stability. These features make CPs a powerful building block of modern biomaterials. Peptide functionalization has been a versatile tool for the development of CP-based biomaterials. With the aid of peptide modifications, the biocompatibility, target selectivity, and cellular interactions of CPs can be greatly improved. Reflecting these aspects, an increasing number of studies on peptide-integrated conducting polymers have been reported recently. In this review, various kinds of peptide immobilization strategies on CPs are introduced. Moreover, the aims of peptide modification are discussed in three aspects: enhancing the specific selectivity, avoiding nonspecific adhesion, and mimicking the environment of extracellular matrix. We highlighted recent studies in the applications of peptide-integrated CPs in electrochemical sensors, antifouling surfaces, and conductive biointerfaces. These studies have shown great potentials from the integration of peptide and CPs as a versatile platform for advanced biological and clinical applications in the near future.

Molecular and nano structures of chiral PEDOT derivatives influence the enantiorecognition of biomolecules. In silico analysis of chiral recognition

In this study we investigated the synergistic effects of the chirality (molecular structure) and surface morphology (nanostructure) of a newly designed sensing platform for the stereoselective recognition of biomolecules. We synthesized 3,4-ethylenedioxythiophene monomers presenting an OH functional group on the side chain (EDOT-OH) with either R or S chirality and then electropolymerized them in a template-free manner to engineer poly(EDOT-OH) nanotubes and smooth films with R or S chirality. We used a quartz crystal microbalance (QCM) to examine the differential binding of fetal bovine serum, RGD peptide, insulin, and (R)- and (S)-mandelic acid (MA) on these chiral polymeric platforms. All of these biomolecules bound stereoselectively and with greater affinity toward the nanotubes than to the smooth films. The sensitive chiral recognition of (S)- and (R)-MA on the (R)-poly(EDOT-OH) nanotube surface occurred with the highest chiral discrepancy ratio of 1.80. In vitro experiments revealed a greater degree of protein deposition from MCF-7 cells on the chiral nanotube surfaces. We employed ab initio molecular dynamics simulations and density functional theory calculations to investigate the mechanism underlying the sensitive chiral recognition between the chiral sensing platforms and the chiral analyte molecules.

Electrochemical Sensors Based on Conducting Polymers for the Aqueous Detection of Biologically Relevant Molecules

Electrochemical sensors appear as low-cost, rapid, easy to use, and in situ devices for determination of diverse analytes in a liquid solution. In that context, conducting polymers are much-explored sensor building materials because of their semiconductivity, structural versatility, multiple synthetic pathways, and stability in environmental conditions. In this state-of-the-art review, synthetic processes, morphological characterization, and nanostructure formation are analyzed for relevant literature about electrochemical sensors based on conducting polymers for the determination of molecules that (i) have a fundamental role in the human body function regulation, and (ii) are considered as water emergent pollutants. Special focus is put on the different types of micro- and nanostructures generated for the polymer itself or the combination with different materials in a composite, and how the rough morphology of the conducting polymers based electrochemical sensors affect their limit of detection. Polypyrroles, polyanilines, and polythiophenes appear as the most recurrent conducting polymers for the construction of electrochemical sensors. These conducting polymers are usually built starting from bifunctional precursor monomers resulting in linear and branched polymer structures; however, opportunities for sensitivity enhancement in electrochemical sensors have been recently reported by using conjugated microporous polymers synthesized from multifunctional monomers.

Multienzymes activity of metals and metal oxide nanomaterials: applications from biotechnology to medicine and environmental engineering

With the rapid advancement and progress of nanotechnology, nanomaterials with enzyme-like catalytic activity have fascinated the remarkable attention of researchers, due to their low cost, high operational stability, adjustable catalytic activity, and ease of recycling and reuse. Nanozymes can catalyze the same reactions as performed by enzymes in nature. In contrast the intrinsic shortcomings of natural enzymes such as high manufacturing cost, low operational stability, production complexity, harsh catalytic conditions and difficulties of recycling, did not limit their wide applications. The broad interest in enzymatic nanomaterial relies on their outstanding properties such as stability, high activity, and rigidity to harsh environments, long-term storage and easy preparation, which make them a convenient substitute instead of the native enzyme. These abilities make the nanozymes suitable for multiple applications in sensing and imaging, tissue engineering, environmental protection, satisfactory tumor diagnostic and therapeutic, because of distinguished properties compared with other artificial enzymes such as high biocompatibility, low toxicity, size dependent catalytic activities, large surface area for further bioconjugation or modification and also smart response to external stimuli. This review summarizes and highlights latest progress in applications of metal and metal oxide nanomaterials with enzyme/multienzyme mimicking activities. We cover the applications of sensing, cancer therapy, water treatment and anti-bacterial efficacy. We also put forward the current challenges and prospects in this research area, hoping to extension of this emerging field. In addition to therapeutic potential of nanozymes for disease prevention, their practical effects in diagnostics, to monitor the presence of SARS-CoV-2 and related biomarkers for future pandemics will be predicted.

Solvothermal synthesis of Fe3O4 nanospheres for high-performance electrochemical non-enzymatic glucose sensor

Ferroferric oxide (Fe3O4) nanospheres have been synthesized via a facile solvothermal procedure to serve as an electrode material for high performance non-enzymatic glucose sensor. The as-synthesized Fe3O4 nanospheres with a uniform size from 16 to 18 nm, which can increase the reaction contact area and the active sites in the process of glucose detection. Benefiting from the particular nanoscale structure, the Fe3O4 nanospheres obviously enhanced the activity of electrocatalytic oxidation towards glucose. When the Fe3O4 nanospheres material was used for non-enzymatic glucose sensor, several electrochemical properties including the high sensitivity 6560 μA mM-1 cm-2 (0.1-1.1 mM), limit of detection 33 μM (S/N = 3) and good long-term stability were well demonstrated. Furthermore, Fe3O4 nanospheres electrode confirmed the excellent performance of selectivity in glucose detection with the interfering substances existed such as urea, citric acid, ascorbic acid, and NaCl. Due to the excellent electrocatalytic activity in alkaline solution, the Fe3O4 nanospheres material can be considered as a promising candidate in blood glucose monitoring.

Ultrasensitive Poly(boric acid) Hydrogel-Coated Quartz Crystal Microbalance Sensor by Using UV Pressing-Assisted Polymerization for Saliva Glucose Monitoring

Quartz crystal microbalance (QCM) has attracted extensive attention in the field of biological analysis and detection because of its high sensitivity, fast response, real-time measurement, good operability, and low-cost production. However, to detect the trace amounts of small molecules, such as low-concentration saliva glucose under physiological conditions, is still a major challenge. Herein, the surface of a QCM chip was coated with a poly(boric acid)-based hydrogel using UV pressing-assisted polymerization to obtain a simple device for glucose detection. The designed QCM sensor shows a record-low detection limit of glucose (3 mg/L at pH 7.5), which is ∼30 times lower than that of sensors fabricated by conventional surface initiation-spin coating. The outperformance of the poly(boric acid) hydrogel-coated QCM sensor is probably due to the uniform and compact microstructure, as well as the presence of sufficient glucose-binding sites resulting from the hydrogel coating generated by UV pressing-assisted polymerization. This method provides an important solution to detect the trace amounts of small organic molecules or ions and has the potential to push forward the practical applications of QCM sensors.

Poly(3,4-ethylenedioxythiophene) Bearing Pyridylboronic Acid Group for Specific Recognition of Sialic Acid

Conducting polymers tethered with molecular recognition elements are good candidates for biosensing applications such as detecting a target molecule with selectivity. We develop a new monomer, namely, 3,4-ethylenedioxythiophene bearing a pyridylboronic acid moiety (EDOT-PyBA), for label-free detection of sialic acid as a cancer biomarker. PyBA, which is known to show specific binding to sialic acid in acid conditions is used as a synthetic ligand instead of lectins. PyBA confirms the enhanced binding affinity for sialic acid at pH 5.0-6.0 compared with traditional phenylboronic acid. Poly(EDOT-PyBA) is electrodeposited on a planar glassy carbon electrode and the obtained film is successfully characterized by X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, water contact angle measurements, and electrochemical impedance spectroscopy. The specific interaction of PyBA with sialic acid at the solution/electrode interface is detected by differential pulse voltammetry in a dynamic range 0.1-3.0 mM with a detection limit of 0.1 mM for a detection time of 3 min. The sensitivity covers the total level of free sialic acid in human serum and the assay time is the shorter than that of other methods. The poly(EDOT-PyBA) electrode successfully detects spiked sialic acid in human serum samples. Owing to its processability, mass productivity, and robustness, polythiophene conjugated with "boronolectin" is a candidate material for developing point-of-care and wearable biosensors.

Engineering Antifouling Conducting Polymers for Modern Biomedical Applications

Conducting polymers are considered to be favorable electrode materials for implanted biosensors and bioelectronics, because their mechanical properties are similar to those of biological tissues such as nerve and brain tissues. However, one of the primary challenges for implanted devices is to prevent the unwanted protein adhesion or cell binding within biological fluids. The nonspecific adsorption generally causes the malfunction of implanted devices, which is problematic for long-term applications. When responding to the requirements of solving the problems caused by nonspecific adsorption, an increasing number of studies on antifouling conducting polymers has been recently published. In this review, synthetic strategies for preparing antifouling conducting polymers, including direct synthesis of functional monomers and post-functionalization, are introduced. The applications of antifouling conducting polymers in modern biomedical applications are particularly highlighted. This paper presents focuses on the features of antifouling conducting polymers and the challenges of modern biomedical applications.

Electrochemical Quantification of Glycated and Non-glycated Human Serum Albumin in Synthetic Urine

A polymer-based electrode capable of specific detection of human serum albumin, and its glycated derivatives, is described. The sensor is constructed from a glass microscope slide coated with a synthesized, polythiophene film bearing a protected, iminodiacetic acid motif. The electrode surface is then further elaborated to a functional biosensor through deprotection of the iminodiacetic acid, followed by metal-affinity immobilization of a specific and high-affinity, albumin ligand. Albumin was then quantified in buffer and synthetic urine via electrochemical impedance spectroscopy. Glycated albumin was next bound to a boronic acid-modified, single-cysteine dihydrofolate reductase variant to quantify glycation ratios by square-wave voltammetry. The platform offers high sensitivity, specificity, and reproducibility in an inexpensive arrangement. The detection limits exceed the requirements for intermediate-term glycemic control monitoring in diabetes patients at 5 and 1 nM for albumin and its glycated forms, respectively.

Electrochemical SERS for in Situ Monitoring the Redox States of PEDOT and Its Potential Application in Oxidant Detection

In response to recent developments for applying conducting polymers on various biomedical applications, the development of characterization techniques for evaluating the states of conducting polymers in liquids is beneficial to the applications of these materials. In this study, we propose a platform using electrochemical surface-enhanced Raman scattering (EC-SERS) technology, which allows a direct measurement of the redox states of conducing polymers in liquids. A thiophene-based conducting polymer, hydroxymethyl poly(3,4-ethylenedioxythiophene) or poly(EDOT-OH), was used to demonstrate this concept. Poly(EDOT-OH) films were coated on Au nanoparticle-coated ITO glass as SERS-active substrates. Taking the advantage of Raman enhancement, we can in situ and clearly monitor the redox behavior of poly(EDOT-OH) in aqueous solutions. The Raman peak intensity decreases as the poly(EDOT-OH) film is oxidized. Furthermore, we demonstrated our idea to utilize this phenomenon as the sensing mechanism for oxidant detection. The Raman intensity of conducting polymers reduces faster when oxidants exist, and we obtain a quantitative analysis for the detection of oxidants. Moreover, the oxidized poly(EDOT-OH) films can be reused for detection of oxidants simply by applying a reduction potential to activate the poly(EDOT-OH) films. The film stability was also confirmed, and the detection of two other oxidants, namely ammonium persulfate and iron chloride, were also demonstrated. The results show different SERS spectra of poly(EDOT-OH) films oxidized by using different oxidants. Besides, the oxidized films can be easily recovered simply by applying a cathodic potential, which allows repeating usage and makes it possible for continuous monitoring applications. To the best of our knowledge, this is the first time to apply PEDOT's Raman feature for detection purposes.

Improved Electrical Wiring of Glucose Oxidase Enzyme with an in-Situ Immobilized Mn(1,10-Phenanthroline)2Cl2-Complex/Multiwalled Carbon Nanotube-Modified Electrode Displaying Superior Performance to Os-Complex for High-Current Sensitivity Bioelectrocatalytic and Biofuel Cell Applications

The search for a new and efficient transducer that can electrically connect enzyme active sites, like flavin adenine dinucleotide in glucose oxidase (GOx), with the electrode surface is a cutting-edge research area. Currently, Os(bpy)-complex pendent polyvinylpyridine/polyvinyl imidazole/pyridinium hydrogel based chemically modified electrodes have been widely used for this purpose (bpy = 2,2'-bipyridine). Herein, we report, a [Mn₂^III(phen)₄(O)(Cl)₂]²⁺ complex/Nafion-immobilized carboxylic acid-functionalized multiwalled carbon nanotube modified glassy carbon electrode (GCE/f-MWCNT@Mn₂(Phen)₄O(Cl)₂-Nf, phen = 1,10-phenanthroline), prepared by an in-situ electrochemical method using the precursor, Mn(phen)₂Cl₂, as an efficient and low cost alternate to the Os-complex transducer, for the glucose oxidase enzyme (GOx) based bio-electro-catalytic system. The existence of the key active site, [Mn₂^III(phen)₄(O)(Cl)₂]²⁺, on the modified electrode was confirmed by physicochemical characterizations using transmission electron microscope, Raman, infrared, and UV-vis spectroscopes and electrospray ionization mass spectrometry techniques. The Mn-complex modified electrode showed a redox peak at E°' = 0.55 V vs Ag/AgCl in neutral solution with a surface excess (Γ_Mn) value of 5.6 × 10^-9 mol cm^-2. The GOx enzyme bioanode prepared by adsorbing GOx on the Mn-complex modified electrode has shown an efficient bioelectrocatalytic oxidation of glucose with a Tafel slope value of 111 mV dec^-1. Amperometric i-t analysis of glucose showed a calibration plot in a linear range of 50-550 μM and with current sensitivity of 316.7 μA mM^-1 cm^-2. The current sensitivity value obtained here is about 2-80 000 times higher than that of the Os(bpy)-complex based transducers used for GOx based bio-electro-catalytic applications. Utilizing this new bioanode system along with a Pt-based oxygen reduction electrode, a new biofuel cell was constructed and achieved a power density value 7.5 μW cm^-2.