Boron-Induced Nitrogen Fixation in 3D Carbon Materials for Supercapacitors

Boron-Nitrogen-Edged Biomass-Derived Carbon: A Multifunctional Approach for Colorimetric Detection of H2O2, Flame Retardancy, and Triboelectric Nanogenerator

Enhancing the concentration and type of nitrogen (N) dopants within the Sp2-carbon domain of carbon recycled from biomass sources is an efficient approach to mimic CNT, GO, and rGO to activate oxidants such as H2O2, excluding toxic chemicals and limiting reaction steps. However, monitoring the kind and concentration of N species in the Sp2-C domain is unlikely with thermal treatments only. A high temperature for graphitization reduces N moieties, leading to low electron density. This inhibits H2O2 adsorption and activation on catalyst surfaces. In this study, coffee waste (CW) is converted into B, N-doped biochar (BXNbY) using boric acid-assisted pyrolysis (H3BO3 mass = X and carbonization temperature = Y) under N2 to overcome the challenge. The B dopant regulates the concentration and type of N, provides Lewis's acid sites, and converts graphitic-N to pyridine-N in BXNbY. The optimized B3Nb900 exhibits excellent colorimetric sensing performance toward H2O2 with a low detection limit (36.9 nM) and high selectivity in the presence of many interferences and milk samples due to high pyridinic-N and Sp2 domain sizes. Interestingly, B enhances other properties of N-containing CW-derived carbon and introduces self-extinguishing and tribopositive properties. Hence, BXNbY-coated polyurethane foam shows excellent flame retardancy and energy harvesting performance.

Salted Dried Bamboo Shoots-Derived Mesoporous Carbon Inherently Doped with SiC and Nitrogen for Capacitive Deionization

Dried bamboo shoots (DBS) are a natural resource with inherent silica content, which can serve as sacrificial templates for the formation of mesoporous carbon but also promote the generation of silicon carbide (SiC). Building on this, we introduced mesoporous and graphitic carbon/SiC (SiC/BSC) as the CDI electrode for copper ion (Cu2+) removal. Mesoporous carbon electrodes facilitate faster ion transport, diffusion, and electron-transfer pathways. Furthermore, SiC accelerates electron transfer and promotes faradic redox reactions during the charge and discharge processes. Consequently, the synergistic effect of SiC/BSC mesoporous carbon material leads to a promising electrode for Cu2+ capacitive deionization. Leveraging these unique properties, the SiC/BSC electrode material exhibits an outstanding CDI performance of 381.5 mg/g at 1.8 V. This study offers a strategy for the preparation of efficient mesoporous carbon materials as CDI electrodes, specifically tailored for the deionization of Cu2+ ions.

In Silico Partial N2 to NH3 Conversion with a Light Atom Molecule

N₂ can be stepwise converted in silico into one molecule NH₃ and a secondary amide with a bond activator molecule consisting only of light main group elements. The proposed N₂ -activating pincer-related compound carries a silyl ion (Si⁽⁺⁾ ) center as well as three Lewis acidic (-BF₂ ) and three Lewis basic (-PMe₂ ) sites, providing an efficient binding pocket for gaseous N₂ within the framework of intramolecular frustrated Lewis pairs (FLP). In addition, it exhibits supportive secondary P-B and F⋅⋅⋅B contacts, which stabilize the structure. In the PSi⁽⁺⁾ -N-N-BP environment the N≡N triple bond is extended from 1.09 Å to remarkable 1.43 Å, resembling a N-N single bond. The strongly activated N-N-fragment is prone to subsequent hydride addition and protonation steps, resulting in the energy efficient transfer of two hydrogen equivalents. The next hydride added causes the release of one molecule NH₃ , but leaves the ligand system as poisoned R₃ Si⁽⁺⁾ -NH₂ -PMe₂ or R₃ Si⁽⁺⁾ -NH₃ dead-end states behind. The study indicates that approximately tetrahedral constrained SiBP₂ -pockets are capable to activate N₂ , whereas the acid-rich SiB₃ - and SiB₂ P-pocktes, as well as the base-rich SiP₃ -pockets fail, hinting towards the high relevance of the acid-base proportion and relative orientation. The electronic structure of the N₂ -activated state is compared to the corresponding state of a recently published peri-substituted bond activator molecule featuring a PSi⁽⁺⁾ -N-N-Si⁽⁺⁾ P site (S. Mebs, J. Beckmann, Physical Chemistry Chemical Physics 2022, 24, 20953-20967).

Carbon Materials as a Conductive Skeleton for Supercapacitor Electrode Applications: A Review

Supercapacitors have become a popular form of energy-storage device in the current energy and environmental landscape, and their performance is heavily reliant on the electrode materials used. Carbon-based electrodes are highly desirable due to their low cost and their abundance in various forms, as well as their ability to easily alter conductivity and surface area. Many studies have been conducted to enhance the performance of carbon-based supercapacitors by utilizing various carbon compounds, including pure carbon nanotubes and multistage carbon nanostructures as electrodes. These studies have examined the characteristics and potential applications of numerous pure carbon nanostructures and scrutinized the use of a wide variety of carbon nanomaterials, such as AC, CNTs, GR, CNCs, and others, to improve capacitance. Ultimately, this study provides a roadmap for producing high-quality supercapacitors using carbon-based electrodes.

In silico activation of dinitrogen with a light atom molecule

The NN triple bond can be cleaved in silico with a light atom molecule containing only the earth abundant elements C, H, Si, and P. Extensive density functional theory (DFT) computations on various classes of peri-substituted scaffolds containing Lewis acidic and basic sites in the framework of frustrated Lewis pairs (FLP) indicate that the presence of two silyl cations and two P atoms in a flexible but not too flexible arrangement is essential for energy efficient N₂-activation. The non-bonding lone-pair electrons of the P atoms thereby serve as donors towards N₂, whereas the lone-pairs of N₂ donate into the silyl cations. Newly formed lone-pair basins in the N₂-adducts balance surplus charge. Thereby, the N-N bond distance is increased by astonishing 0.3 Å, from 1.1 Å in N₂ gas to 1.4 Å in the adduct, which makes this bond prone to subsequent addition of hydride ions and protonation, forming two secondary amine sites in the process and eventually breaking the NN triple bond. Potential formation of dead-end states, in which the dications ("active states") aversively form a Lewis acid (LA)-Lewis base (LB) bond, or in which the LA and LB sites are too far away from each other to be able to capture N₂, are problematic but might be circumvented by proper choice of spacer molecules, such as acenaphthalene or biphenylene, and the ligands attached to the LA and LB atoms, such as phenyl or mesityl, and by purging the reaction solutions with gaseous N₂ in the initial reaction steps. Charge redistributions via N₂-activation and splitting were monitored by a variety of real-space bonding indicators (RSBIs) derived from the calculated electron and electron pair densities, which provided valuable insight into the bonding situation within the different reaction steps.

B,N-Codoped Porous C with Controllable N Species as an Electrode Material for Supercapacitors

Manufacturing heteroatom-doped porous C with controllable N species is an important issue for supercapacitors. Herein, we report a low-cost and simplified strategy for synthesizing B,N-codoped porous C (BNPC) by a freeze-drying chitosan-boric acid aerogel beads and subsequent carbonization treatment. The BNPC samples were studied using various characterization technologies. The introduction of boric acid to chitosan successfully induced the formation of B,N-codoped C with a well-developed 3D interconnected porous structure. The B doping had a significant impact on the distribution of N species in the samples. Moreover, the good wettability of the sample resulting from B doping is favorable for electrolyte diffusion and ion transport. As a consequence, the optimal BNPC sample showed an excellent specific capacitance of 240 F g^-1 at 0.5 A g^-1 and an outstanding capacitance retention of 95.1% after 10000 cycles at 5 A g^-1. An assembled symmetrical supercapacitor displayed an energy density of 11.4 Wh kg^-1 at a power density of 250 W kg^-1. The proposed work provides a simple and effective method to obtain B,N-codoped C-based materials with high electrochemical performance.