Enhancing Chlorine Resistance and Water Permeability during Forward Osmosis Separation Using Superhydrophilic Materials with Conjugated Systems

Application of conjugated materials in sports training

In recent years, with the rapid development of the sports industry, the quality of sports training products on the market is uneven. Problems such as inaccurate detection of athletes' physical indicators, low comfort of sportswear, and reduced satisfaction with sports equipment often occur. To this end, this article proposes to apply conjugated materials with excellent optical, electrical, thermal and other properties to sports training and sports products, by summarizing the properties of conjugated materials and their applications in sports training, explores the potential of conjugated materials in improving athletes' training effects, monitoring sports status, and improving sports equipment. This article rates the application of conjugated materials in sports training products in terms of comfort, waterproofness, portability, lightness, aesthetics and breathability. The results showed that the average scores of the 20 sports participants on sportswear were 9.0475, 9.0075, 9.01, 9.025, 9.0325 and 9.04 respectively; the average scores on sports shoes were 9.035, 9.055, 9.02, 9.085, 9.0175 and 8.9975 respectively. Research shows that applying conjugated materials to sports training can improve athletes' performance and contribute to the better development of sports.

Construction and Chlorine Resistance of Thiophene-Poly(ethyleneimine)-Based Dual-Functional Nanofiltration Membranes

The demand to improve the chlorine resistance of polyamide (PA) membranes is escalated with greater amounts of chlorine-containing disinfectant being used in global water treatment during the COVID-19 pandemic. In this work, we designed thiophene-functionalized poly(ethyleneimine) (TPEI) materials first and grafted them onto a conventional PA membrane to develop novel nanofiltration membranes (PEI-M, TPEI-1-M, TPEI-2-M). These membranes have dual-functionalized selective surfaces covered by hydrophilic amino groups and electron-rich thiophene moieties, which endow these membranes with superior chlorine resistance and improved separation performance. The modified membranes increase the rejection of MgCl2 from 86.5% of the nascent PA membrane (PA-M) to higher than 93.0% without sacrificing the membrane water permeability. More stable separation performance is achieved with all of the as-prepared membranes than PA-M after exposure to a 2000 ppm sodium hypochlorite solution. TPEI-2-M outperforms other membranes after being treated in a chlorination intensity of 16,000 ppm·h with the smallest flux loss and the highest MgCl2 rejection. This is mainly ascribed to the highest amount of amino and thiophene moieties on the TPEI-2-M surface. This study provides an effective protocol for developing novel PA-based nanofiltration membranes while demonstrating its superiority over current technologies with exceptional separation performance and antichlorine ability.

Graphene Quantum Dot-Added Thin-Film Composite Membrane with Advanced Nanofibrous Support for Forward Osmosis

Forward osmosis (FO) technology for desalination has been extensively studied due to its immense benefits over conventionally used reverse osmosis. However, there are some challenges in this process such as a high reverse solute flux (RSF), low water flux, and poor chlorine resistance that must be properly addressed. These challenges in the FO process can be resolved through proper membrane design. This study describes the fabrication of thin-film composite (TFC) membranes with polyethersulfone solution blown-spun (SBS) nanofiber support and an incorporated selective layer of graphene quantum dots (GQDs). This is the first study to sustainably develop GQDs from banyan tree leaves for water treatment and to examine the chlorine resistance of a TFC FO membrane with SBS nanofiber support. Successful GQD formation was confirmed with different characterizations. The performance of the GQD-TFC-FO membrane was studied in terms of flux, long-term stability, and chlorine resistance. It was observed that the membrane with 0.05 wt.% of B-GQDs exhibited increased surface smoothness, hydrophilicity, water flux, salt rejection, and chlorine resistance, along with a low RSF and reduced solute flux compared with that of neat TFC membranes. The improvement can be attributed to the presence of GQDs in the polyamide layer and the utilization of SBS nanofibrous support in the TFC membrane. A simulation study was also carried out to validate the experimental data. The developed membrane has great potential in desalination and water treatment applications.

ZnO Nanoneedle-Modified PEEK Fiber Felt for Improving Anti-fouling Performance of Oil/Water Separation

Membrane separation has been considered to be the most effective decontamination method for oily waste water. The most significant point of membrane separation is the resistance against membrane fouling. Fabricating hierarchical architectures on the membrane surface is an available approach to improving its anti-fouling property. In this study, ZnO nanoneedles were successfully anchored onto surface-sulfonated poly(ether-ether-ketone) (PEEK) felt via UV/ozone cleaning and hydrothermal synthesis. The modified felt (PEEK-f-Z) showed much better anti-fouling properties and far higher rejection height (33 cm) than the unmodified felt (17 cm) with a separation efficiency up to 99.99%. The enhanced separation properties could be attributed to the stronger water locking capability of the hierarchical architectures on the surface. Furthermore, benefiting from the great chemical stability of PEEK substrates and ZnO nanoneedles, the as-prepared membrane exhibited admirable solvent resistance, mechanical strength, and thermal stability. As a result, PEEK-f-Z could even separate immiscible organic liquids with different polarities and collect hot water from the oil/water mixture, promising to be used under severe conditions.

Corn Stalk-Derived Carbon Quantum Dots with Abundant Amino Groups as a Selective-Layer Modifier for Enhancing Chlorine Resistance of Membranes

Low permeability and chlorine resistance of normal thin-film composite (TFC) membranes restrict their practical applications in many fields. This study reports the preparation of a high chlorine-resistant TFC membrane for forward osmosis (FO) by incorporating corn stalk-derived N-doped carbon quantum dots (N-CQDs) into the selective polyamide (PA) layer to construct a polydopamine (PDA) sub-layer (PTFC_CQD). Membrane modification is characterized by surface morphology, hydrophilicity, Zeta potential, and roughness. Results show that TFC_CQD (without PDA pretreatment) and PTFC_CQD membranes possess greater negative surface charges and thinner layer-thickness (less than 68 nm). With N-CQDs and PDA pretreatment, the surface roughness of the PTFC_CQD membrane decreases significantly with the co-existence of microsized balls and flocs with a dense porous structure. With the variation of concentration and type of draw solution, the PTFC_CQD membrane exhibits an excellent permeability with low J_{(reverse salt flux)}/J_{(water flux)} values (0.1-0.25) due to the enhancement of surface hydrophilicity and the shortening of permeable paths. With 16,000 ppm·h chlorination, reverse salt flux of the PTFC_CQD membrane (8.4 g m^-2 h^-1) is far lower than those of TFC_CQD (136.2 g m^-2 h^-1), PTFC (127.6 g m^-2 h^-1), and TFC (132 g m^-2 h^-1) membranes in FO processes. The decline of salt rejection of the PTFC_CQD membrane is only 8.2%, and the normalized salt rejection maintains 0.918 in the RO system (16,000 ppm·h chlorination). Super salt rejection is ascribed to the existence of abundant N-H bonds (N-CQDs), which are preferentially chlorinated by free chlorine to reduce the corrosion of the PA layer. The structure of the PA layer is stable during chlorination also due to the existence of various active groups grafted on the surface. This study may pave a new direction for the preparation of durable biomass-derivative (N-CQD)-modified membranes to satisfy much more possible applications.