Innovative Approach to Photo-Chemiresistive Sensing Technology: Surface-Fluorinated SnO2 for VOC Detection

Smart Dust for Chemical Mapping

This review article explores the transformative potential of smart dust systems by examining how existing chemical sensing technologies can be adapted and advanced to realize their full capabilities. Smart dust, characterized by submillimeter-scale autonomous sensing platforms, offers unparalleled opportunities for real-time, spatiotemporal chemical mapping across diverse environments. This article introduces the technological advancements underpinning these systems, critically evaluates current limitations, and outlines new avenues for development. Key challenges, including multi-compound detection, system control, environmental impact, and cost, are discussed alongside potential solutions. By leveraging innovations in miniaturization, wireless communication, AI-driven data analysis, and sustainable materials, this review highlights the promise of smart dust to address critical challenges in environmental monitoring, healthcare, agriculture, and defense sectors. Through this lens, the article provides a strategic roadmap for advancing smart dust from concept to practical application, emphasizing its role in transforming the understanding and management of complex chemical systems.

Construction of Flower-like PtOx@ZnO/In2O3 Hollow Microspheres for Ultrasensitive and Rapid Trace Detection of Isopropanol

The design of a highly effective isopropanol gas sensor with high response and trace detection capability is extremely important for environmental surveillance and human health. Here, novel flower-like PtO_x@ZnO/In₂O₃ hollow microspheres were prepared by a three-step approach. The hollow structure was composed of an In₂O₃ shell inside and layered ZnO/In₂O₃ nanosheets outside with PtO_x nanoparticles (NPs) on the surface. Meanwhile, the gas sensing performances of the ZnO/In₂O₃ composite with different Zn/In ratios and PtO_x@ZnO/In₂O₃ composites were evaluated and compared systematically. The measurement results indicated that the ratio of Zn/In affected the sensing performance and the ZnIn₂ sensor presented a higher response, which was then modified with PtO_x NPs to further enhance its sensing property. The Pt@ZnIn₂ sensor exhibited outstanding isopropanol detection performance with ultrahigh response values under 22 and 95% relative humidity (RH). In addition, it also showed a rapid response/recovery speed, good linearity, and low theoretical limit of detection (LOD) regardless of being under a relatively dry or ultrahumid atmosphere. The enhancement of isopropanol sensing properties might be ascribed to the unique structure of PtO_x@ZnO/In₂O₃, heterojunctions between the components, and catalytic effect of Pt NPs.

Room Temperature Humidity Tolerant Xylene Sensor Using a Sn-SnO2 Nanocomposite

Xylene is one of the representative indoor pollutants, even in ppb levels, that affect human health directly. Due to the non-polar and less reactive nature of xylene, its room temperature detection is challenging. This work demonstrates a metallic tin-doped Sn-SnO₂ nanocomposite under controlled pH conditions via a simple solvothermal route. The Sn nanoparticles are uniformly distributed inside the SnO₂ nanospheres of ∼70 nm with a high specific surface area of 118.8 m²/g. The surface of the Sn-SnO₂ nanocomposite exhibits strong affinity toward benzene, toluene, ethylbenzene, and xylene (BTEX) compared to other polar volatile organic compounds (VOCs) such as ethanol, acetone, isopropyl alcohol, formaldehyde, and chloroform tested in this study. The sensor's response is highest for xylene among BTEX molecules. Under ambient room temperature conditions, the sensor exhibits a linear response to xylene in the 1-100 ppm range with a sensitivity of ∼255% at 60 ppm within ∼1.5 s and recovers in ∼40 s. The sensor is hardly affected by humidity variations (40-70%), leading to enhanced reliability and repeatability under dynamic environmental conditions. The meso and microporous nanosphere morphology act as a nanocontainer for non-polar VOCs to diffuse inside the nanostructures, providing easy accessibility. The metallic Sn increases the affinity for less reactive xylene at room temperature. Thus, the nanocatalytic Sn-SnO₂ nanocomposite is an active gas/VOC sensing material and provides an effective solution for sensing major indoor pollutants under humid conditions.

2D materials: increscent quantum flatland with immense potential for applications

Quantum flatland i.e., the family of two dimensional (2D) quantum materials has become increscent and has already encompassed elemental atomic sheets (Xenes), 2D transition metal dichalcogenides (TMDCs), 2D metal nitrides/carbides/carbonitrides (MXenes), 2D metal oxides, 2D metal phosphides, 2D metal halides, 2D mixed oxides, etc. and still new members are being explored. Owing to the occurrence of various structural phases of each 2D material and each exhibiting a unique electronic structure; bestows distinct physical and chemical properties. In the early years, world record electronic mobility and fractional quantum Hall effect of graphene attracted attention. Thanks to excellent electronic mobility, and extreme sensitivity of their electronic structures towards the adjacent environment, 2D materials have been employed as various ultrafast precision sensors such as gas/fire/light/strain sensors and in trace-level molecular detectors and disease diagnosis. 2D materials, their doped versions, and their hetero layers and hybrids have been successfully employed in electronic/photonic/optoelectronic/spintronic and straintronic chips. In recent times, quantum behavior such as the existence of a superconducting phase in moiré hetero layers, the feasibility of hyperbolic photonic metamaterials, mechanical metamaterials with negative Poisson ratio, and potential usage in second/third harmonic generation and electromagnetic shields, etc. have raised the expectations further. High surface area, excellent young's moduli, and anchoring/coupling capability bolster hopes for their usage as nanofillers in polymers, glass, and soft metals. Even though lab-scale demonstrations have been showcased, large-scale applications such as solar cells, LEDs, flat panel displays, hybrid energy storage, catalysis (including water splitting and CO2 reduction), etc. will catch up. While new members of the flatland family will be invented, new methods of large-scale synthesis of defect-free crystals will be explored and novel applications will emerge, it is expected. Achieving a high level of in-plane doping in 2D materials without adding defects is a challenge to work on. Development of understanding of inter-layer coupling and its effects on electron injection/excited state electron transfer at the 2D-2D interfaces will lead to future generation heterolayer devices and sensors.

Electrospinning SA@PVDF-HFP Core-Shell Nanofibers Based on a Visual Light Transmission Response to Alcohol for Intelligent Packaging

A naked-eye detector based on a rapid transmittance response to alcohol was designed to offer real-time and reusable detection of fruit freshness. To ensure the hydrophobicity of the fibrous membrane and high light transmission response to alcohol, fluorine-rich poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) with a low refractive index was selected as the shell layer, while sodium alginate (SA) and polyvinyl alcohol (PVA) were selected as the core layer for coaxial electrospinning. The core-shell fibrous detector was obtained by treatment with CaCl₂ to form a stable hydrogel and by water flushing to remove PVA. The interior structure of the fiber and its evolution were investigated with increasing SA concentration, which changed from a nonconcentric structure to a core-shell structure. Without SA, nonconcentric structured fibers were obtained due to high flowability and incompatibility between the organic solvent phase of PVDF-HFP and the aqueous phase of PVA. As the SA concentration increased, the enhanced viscosity and surface tension decreased the asymmetric mobility significantly, which competed with the charge attractive forces from the Taylor cone surface, leading to a core-shell structure. The as-spun membranes were opaque due to light scattering at the interface between air and fiber and became light transparent after immersion in a rotten fruit-containing alcohol and acetic acid due to a decreased light loss. The rapidly responsive, reusable fibrous membranes with over 90% light transparency developed here have high potential for application in visual intelligent packaging to monitor the freshness of fruits and vegetables.

Construction of Large-Scale Conjugated Functionalized Cyclotriphosphazene Lanthanide Framework for Selective Sensing of Volatile Organic Compounds and Assembly of Color-Tunable Dye-Encapsulated Composites

A flexible functionalized cyclotriphosphazene hexacarboxylic acid, hexakis(4-carboxylatephenoxy) cyclotriphosphazene (HCPCP), is used for the synthesis of a family of fluorescent Ln-HCPCP frameworks (Ln = La, Pr, Nd, Gd, and Ho). Structural analysis shows that the compounds exhibit 3D structures with [Ln₃(COO)₁₀], secondary building units formed by Ln-O-C-O-Ln connection. Then the molecules are connected to each other through HCPCP, forming rectangular channels along the c-direction. Interestingly, the fluorescence sensing studies show that compound 1 could be used as a multifunctional fluorescence sensor toward volatile organic compounds via different fluorescence emission behaviors. Moreover, a series of Dye@La-HCPCP composites (Dye = rhodamine B, safranine T, crystal violet, and malachite green) are successfully prepared with different quantum yields by the solvothermal reaction followed by cation exchanges.

Plasma-induced oxygen vacancies enabled ultrathin ZnO films for highly sensitive detection of triethylamine

Metal oxide semiconductor (MOS) thin films hold great promise for electronic devices such as gas sensors. However, the low surface activity of pristine MOS often leads to inferior sensitivity and the sensitization mechanism of ultrathin MOS films has received rare attention. Herein, we report a high performance gas sensor based on plasma-etched ZnO thin films. The ultrathin ZnO films (20 nm) were deposited on SiO₂ wafers by atomic layer deposition (ALD), which enables high-throughput production of sensor devices. The ZnO sensor shows typical n-type conductivity, which is highly variable to the exposure of triethylamine (TEA). Annealing temperature of the films is found to impact the sensor response, revealing calcination at a moderate temperature, i.e. 700 °C, leads to the best response. Further treatment by Ar plasma results in a remarkable decrease of sensor working temperature from 300 °C of untreated films to 250 °C and nearly 4-fold enhancement in the sensor response to 10 ppm TEA. Notably, the plasma-treated ZnO sensor also shows decent response even at room temperature (RT), which has been seldom reported for ZnO-based sensors. Structure and mechanism investigations reveal that the superior sensor properties are derived from the abundant oxygen vacancies generated by Ar plasma etching.

Scalable Fabrication of Scratch-Proof Transparent Al/F-SnO2 Hybrid Electrodes with Unusual Thermal and Environmental Stability

Fabrication protocols of transparent conducting electrodes (TCEs), including those which produce TCEs of high values of figure of merit, often fail to address issues of scalability, stability, and cost. When it comes to working with high-temperature stable electrodes, one is left with only one and that too, an expensive choice, namely, fluorine-doped SnO₂ (FTO). It is rather difficult to replace FTO with a low-cost TCE due to stability issues. In the present work, we have shown that an Al nanomesh fabricated employing the crack template method exhibits extreme thermal stability in air even at 500 °C, compared with that of FTO. In order to fill in the non-conducting island regions present in between the mesh wires, a moderately conducting material SnO₂ layer was found adequate. The innovative step employed in the present work relates to the SnO₂ deposition without damaging the underneath Al, which is a challenge in itself, as the commonly used precursor, SnCl₂ solution, is quite corrosive toward Al. Optimization of spray coating of the precursor while the Al mesh on a glass substrate held at an appropriate temperature was the key to form a stable hybrid electrode. The resulting Al/SnO₂ electrode exhibited an excellent transparency of ∼83% at 550 nm and a low sheet resistance of 5.5 Ω/□. SnO₂ coating additionally made the TCE scratch-proof and mechanically stable, as the adhesion tape test showed only 8% change in sheet resistance after 1000 cycles. Further, to give FTO-like surface finish, the SnO₂ surface was fluorinated by treating with a Selectfluor solution. As a result, the Al/F-SnO₂ hybrid film exhibited one order higher surface conductivity with negligible sensitivity toward humidity and volatile organics, while becoming robust toward neutral electrochemical environments. Finally, a custom-designed projection lithography technique was used to pixelate the Al/SnO₂ hybrid film for optoelectronic device applications.