Controlled Natural Biomass Deoxygenation Allows the Design of Reusable Hot-Melt Adhesives Acting in a Multiple Oxygen Binding Mode

Robust and Reprocessable Biorenewable Polyester Nanocomposites In Situ Catalyzed and Reinforced by Dendritic MXene@CNT Heterostructure

Renewable 2,5-furandicarboxylic acid-based polyesters are one of the most promising materials for achieving plastic replacement in the age of energy and environmental crisis. However, their properties still cannot compete with those of petrochemical-based plastics, owing to insufficient molecular and/or microstructure designs. Herein, we utilize the Ti3C2Tx-based MXene nanosheets for decorating carbon nanotube (CNT) and obtaining the structurally stable and highly dispersed dendritic hetero-structured MXene@CNT, that can act as multi-roles, i.e., polycondensation catalyst, crystal nucleator, and interface enhancer of polyester. The bio-based MXene@CNT/polybutylene furandicarboxylate (PBF) (denoted as MCP) nanocomposites are synthesized by the strategy of "in situ catalytic polymerization and hot-pressing". Benefiting from the multi-scale interactions (i.e., covalent bonds, hydrogen bonds, and physical interlocks) in hybrid structure, the MCP presents exceptional mechanical strength (≈101 MPa), stiffness (≈3.1 GPa), toughness (≈130 MJ m-3), and barrier properties (e.g., O2 0.0187 barrer, CO2 0.0264 barrer, and H2O 1.57 × 10-14 g cm cm-2 s Pa) that are higher than most reported bio-based materials and engineering plastics. Moreover, it also displays satisfactory multifunctionality with high reprocessability (90% strength retention after 5 recycling), UV resistance (blocking 85% UVA rays), and solvent-resistant properties. As a state-of-art high-performance and multifunctional material, the novel bio-based MCP nanocomposite offers a more sustainable alternative to petrochemical-based plastics in packaging and engineering material fields. More importantly, our catalysis-interfacial strengthening integration strategy opens a door for designing and constructing high-performance bio-based polyester materials in future.

Ductile poly(lactic acid)-based blends derived from poly(butylene succinate-co-butylene 2,5-thiophenedicarboxylate): Structures and properties

Because of superior tensile strength, biodegradability, and biocompatibility, poly(lactic acid) (PLA) has emerged as one among the growth-oriented biodegradable materials. But it has been limited to some extent in practical applications due to poor ductility. Consequently, in order to improve the drawback of poor ductility of PLA, ductile blends were obtained by melt-blending of poly(butylene succinate-co-butylene 2,5-thiophenedicarboxylate) (PBSTF25) with PLA. PBSTF25 has a good improvement on the ductility of PLA due to its excellent toughness. Differential scanning calorimetry (DSC) showed that PBSTF25 promoted the cold crystallization of PLA. Wide-angle X-ray diffraction (XRD) results revealed that PBSTF25 experienced stretch-induced crystallization throughout the stretching procedure. Scanning electron microscopy (SEM) showed neat PLA had a smooth fracture surface, but the blends had rough fracture surface. PBSTF25 can improve the ductility and processing properties of PLA. When the addition of PBSTF25 reached 20 wt%, tensile strength was 42.5 MPa and elongation at break increased to 156.6 %, approximately 19 times as much as PLA. The toughening effect of PBSTF25 was better than that of poly(butylene succinate).

Recent advances in the development of green furan ring-containing polymeric materials based on renewable plant biomass

Fossil resources are rapidly depleting, forcing researchers in various fields of chemistry and materials science to switch to the use of renewable sources and the development of corresponding technologies. In this regard, the field of sustainable materials science is experiencing an extraordinary surge of interest in recent times due to the significant advances made in the development of new polymers with desired and controllable properties. This review summarizes important scientific reports in recent times dedicated to the synthesis, construction and computational studies of novel sustainable polymeric materials containing unchanged (pseudo)aromatic furan cores in their structure. Linear polymers for thermoplastics, branched polymers for thermosets and other crosslinked materials are emerging materials to highlight. Various polymer blends and composites based on sustainable polyfurans are also considered as pathways to achieve high-value-added products.

A Highly Breathable and Machine-Washable ePTFE-Aided Down-Proof Cotton Fabric

Feather and down textiles are widely used in our daily life, especially in winter. However, they are easily drilled out from the fabric body and are difficult to machine-wash, which thereby blocks their widespread application. In order to solve these issues, a highly anti-drilling, breathable and machine-washable ePTFE-aided down-proof cotton fabric was prepared in this work, which was done by modifying a plain-weave cotton fabric with expanded polytetrafluoroethylene (ePTFE) nanofiber membrane via point glue method. The fabrication procedure is simple, scalable and environmentally friendly, which is a prerequisite for large-scale production. The effects of tumble and washing cycles on pore size distribution and the corresponding anti-drilling behavior of the prepared down-proof fabric were systematically investigated. Furthermore, the machine washability, air permeability, thermal insulation and tensile properties of the fabric were studied. The results demonstrated that less than five drilled files escaped from the fabric surface, irrespective of tumble and/or laundering cycles, and it also has the advantages of being lightweight (<83 g/m2), having high breathability, a good thermal insulation rate (≈80%) and can be washed with surfactant by a laundry machine without explosion. Benefiting from the above characteristics, the as-prepared ePTFE-aided down-proof cotton fabric presents its potential application in the field of home textiles.

Integration of thermal imaging and neural networks for mechanical strength analysis and fracture prediction in 3D-printed plastic parts

Additive manufacturing demonstrates tremendous progress and is expected to play an important role in the creation of construction materials and final products. Contactless (remote) mechanical testing of the materials and 3D printed parts is a critical limitation since the amount of collected data and corresponding structure/strength correlations need to be acquired. In this work, an efficient approach for coupling mechanical tests with thermographic analysis is described. Experiments were performed to find relationships between mechanical and thermographic data. Mechanical tests of 3D-printed samples were carried out on a universal testing machine, and the fixation of thermal changes during testing was performed with a thermal imaging camera. As a proof of concept for the use of machine learning as a method for data analysis, a neural network for fracture prediction was constructed. Analysis of the measured data led to the development of thermographic markers to enhance the thermal properties of the materials. A combination of artificial intelligence with contactless nondestructive thermal analysis opens new opportunities for the remote supervision of materials and constructions.

Catalytic C-H Functionalization of Unreactive Furan Cores in Bio-Derived Platform Chemicals

C-H functionalization is one of the most convenient and powerful tools in the arsenal of modern chemistry, deservedly nominated as the "Holy Grail" of organic synthesis. A frequent disadvantage of this method is the need for harsh reaction conditions to carry out transformations of inert C-H bonds, which limits the possibility of its use for modifying less stable substrates. Biomass-derived furan platform chemicals, which have a relatively unstable aromatic furan core and highly reactive side chain substituents, are extremely promising and valuable organic molecules that are currently widely used in a variety of research and industrial fields. The high sensitivity of furan derivatives to acids, strong oxidants, and high temperatures significantly limits the use of classical methods of C-H functionalization for their modification. New methods of catalytic functionalization of non-reactive furan cores are urgently required to obtain a new generation of materials with controlled properties and potentially bioactive substances.