A Novel Strategy to Fabricate Cation-Cross-linked Graphene Oxide Membrane with High Aqueous Stability and High Separation Performance

Improving strength and toughness of graphene film through metal ion bridging

The fangs, jaws, and mandibles of marine invertebrates such as Chiton and Glycera show excellent mechanical properties, which are mostly contributed to the interactions between metal (Fe, Cu, Zn, etc.) and oxygen-containing functional groups in proteins. Inspired by these load-bearing skeletal biomaterials, we improved tensile strength and toughness of graphene films through bridging graphene oxide (GO) nanosheets by metal ions. By optimizing the metal coordination form and density of cross-linking network. We revealed the relationship between mechanical properties and the unique spatial geometry of the GO nanosheets bridged by different valence metal ions. The results demonstrated that the divalent metal ions form tetrahedral geometry with carboxylate groups on the edges of the GO nanosheets, and the bond energy is relatively low, which is helpful for improving the toughness of resultant graphene films. While the trivalent metal ions are easily to form octahedral geometry with the GO nanosheets with higher bond energy, which is better for enhancing the tensile strength of graphene films. After reduction, the reduced GO (rGO) film bridged by divalent metal ions shows 43% improvement in toughness, while the rGO film bridged by trivalent metal ions shows 64% improvement in tensile strength. Our work reveals the mechanism of metal coordination bond energy and spatial geometry to improve the mechanical properties of graphene films, which lays a theoretical foundation for improving the tensile strength and toughness of resultant graphene films, and provides an avenue for fabricating high-performance graphene films and other two-dimensional nanocomposites.

Metal cation crosslinked, partially reduced graphene oxide membranes with enhanced stability for high salinity, produced water treatment by pervaporative separation

Graphene oxide (GO)-based membranes hold significant promise for applications ranging from energy storage to protective coatings, to saline water and produced water treatment, owing to their chemical stability and unique barrier properties achieving a high selectivity for water permeation. However, unmodified GO membranes are not stable when submerged in liquid water, creating challenges with their commercial utilization in aqueous filtration and pervaporation applications. To mitigate this, we develop an approach to modify GO membranes through a combination of low temperature thermal reduction and metal cation crosslinking. We demonstrate that Zn2+-rGO and Fe3+-rGO membranes had the highest permeation flux of 8.3 ± 1.5 l m-2h-1and 7.0 ± 0.4 l m-2h-1, for saline water separation, respectively, when thermally reduced after metal cross-linking; These membranes maintained a high flux of 7.5 ± 0.7 l m-2h-1, and 5.5 ± 0.3 l m-2h-1for produced water separation, respectively. All the membranes had a salt rejection higher than 99%. Fe3+crosslinked membranes presented the highest organic solute rejections for produced water of 69%. Moreover, long term pervaporation testing was done for the Zn2+-rGO membrane for 12 h, and only a minor drop of 6% in permeation flux was observed, while Zn2+-GO had a drop of 24%. Both modifiers significantly enhanced the stability with Fe3+-rGO membranes displaying the highest mechanical abrasion resistance of 95% compared to non-reduced and non-crosslinked GO. Improved stability for all samples also led to higher selectivity to water over organic contaminants and only slightly reduced water flux across the membrane.

A Facile Way to Fabricate GO-EDA/Al2O3 Tubular Nanofiltration Membranes with Enhanced Desalination Stability via Fine-Tuning the pH of the Membrane-Forming Suspensions

Pristine graphene oxide (GO)-based membranes have proven promising for molecular and ion separation owing to efficient molecular transport nanochannels, but their separation ability in an aqueous environment is limited by the natural swelling tendency of GO. To obtain a novel membrane with anti-swelling behavior and remarkable desalination capability, we used the Al₂O₃ tubular membrane with an average pore size of 20 nm as the substrate and fabricated several GO nanofiltration ceramic membranes with different interlayer structures and surface charges by fine-tuning the pH of the GO-EDA membrane-forming suspension (pH = 7, 9, 11). The resultant membranes could maintain desalination stability, whether immersed in water for 680 h or operated under a high-pressure environment. When the pH of the membrane-forming suspension was 11, the prepared GE-11 membrane showed a rejection of 91.5% (measured at 5 bar) towards 1 mM Na₂SO₄ after soaking in water for 680 h. An increase in the transmembrane pressure to 20 bar resulted in an increase in the rejection towards the 1 mM Na₂SO₄ solution to 96.3%, and an increase in the permeance to 3.7 L·m^-2·h^-1·bar^-1. The proposed strategy in varying charge repulsion is beneficial to the future development of GO-derived nanofiltration ceramic membranes.

Optimization of bandgap reduction in 2-dimensional GO nanosheets and nanocomposites of GO/iron-oxide for electronic device applications

In this report we have developed different fabrication parameters to tailor the optical bandgap of graphene oxide (GO) nanosheets to make it operational candidate in electronic industry. Here we performed two ways to reduce the bandgap of GO nanosheets. First, we have optimized the oxidation level of GO by reducing amount of oxidizing agent (i.e. KMnO₄) to control the sp²/sp³ hybridization ratio for a series of GO nanosheets samples. We noticed the reduction in primary band edge 3.93-3.2 eV while secondary band edge 2.98-2.2 eV of GO nanosheets as the amount of KMnO₄ is decreased from 100 to 30%. Second, we have fabricated a series of 2-dimensional nanocomposites sample containing GO/Iron-oxide by using a novel synthesis process wet impregnation method. XRD analysis of synthesized nanocomposites confirmed the presence of both phases,[Formula: see text]-Fe₂O₃ and Fe₃O₄ of iron-oxide with prominent plane (001) of GO. Morphological investigation rules out all the possibilities of agglomerations of iron oxide nanoparticles and coagulation of GO nanosheets. Elemental mapping endorsed the homogeneous distribution of iron oxide nanoparticles throughout the GO nanosheets. Raman spectroscopy confirmed the fairly constant I_D/I_G ratio and FWHM of D and G peaks, thus proving the fact that the synthesis process of nanocomposites has no effect on the degree of oxidation of GO flakes. Red shift in G peak position of all the nanocomposites samples showed the electronic interaction among the constituents of the nanocomposite. Linear decrease in the intensity of PL (Photoluminescence) spectra with the increasing of Iron oxide nanoparticles points towards the increased interaction among the iron oxide nanoparticles and GO flakes. Optical absorption spectroscopy reveals the linear decrease in primary edge of bandgap from 2.8 to 0.99 eV while secondary edge decrease 3.93-2.2 eV as the loading of [Formula: see text]-Fe₂O₃ nanoparticles is increased from 0 to 5% in GO nanosheets. Among these nanocomposites samples 5%-iron-oxide/95%-GO nanosheet sample may be a good contestant for electronic devices.

Rearrangement of GO nanosheets with inner and outer forces under high-speed spin for supercapacitor

The self-standing graphene membranes are considered as ideal electrode materials for supercapacitors. However, maintaining highly regularized and uniform graphene membranes with satisfied electrochemical performance is still a challenge. Herein, with the chelation of metal cation and the radial shear force introduced by high-speed spinning, the uniform interlayer channels and shrunken cracks between adjacent nanosheets can be achieved in the metal-intercalated graphene oxide (GO) membranes, thus realizing regularization both in normal and radial direction. With the promotion in electron transfer and electrolyte penetration, the iron cross-linked GO membrane with spin coating for 40 cycles exhibits a high specific capacitance (427 F g^-1 at 1 A g^-1) and rate capability (42.6% capacitance retention from 1 to 40 A g^-1), as well as excellent cyclic capability (90.5% capacitance retention after 20,000 cycles). Particularly, a 21% increasement in capacitance can be achieved after high-speed spinning treatment. Moreover, the spin regularization strategy can be extended to GO membranes cross-linked by various multi-valence metal cations, the electrochemical performance of metal-cation cross-linked GO membrane electrodes after high-speed spinning treatment can also be improved obviously. Therefore, this paper provides a novel method to fabricate highly ordered GO membranes with promising electrochemical performance, which presents an immense potential application in membrane materials applied in energy storage, separation and catalysis.

Al3+ Modification of Graphene Oxide Membranes: Effect of Al Source

Graphene oxide (GO) membranes are promising materials for water filtration applications due to abundant nanochannels in the membrane structure. Because GO membranes are unstable in water, metal cations such as Al³⁺ are often introduced to the membrane structure to promote cross-linking between individual GO sheets. Here, we describe a simple yet versatile method to incorporate Al³⁺ into GO membranes formed via a slow self-assembly process. Specifically, we directly added aluminum to acidic GO sheet solutions from a variety of sources: Al₂O₃, AlCl₃ and Al foil. Each species reacts differently with water, which can affect the GO solution pH and thus the density of carboxylate groups on the sheet edges available for cross-linking to the Al³⁺ cations. We demonstrate through characterization of the GO sheet solutions as well as the as-formed membranes' morphologies, hydrophobicities, and structures that the extent to which the Al³⁺ cross-links to the GO sheet edges vs. the GO sheet basal planes is dependent on the Al source. Our results indicate that greatest enhancements in the membrane stability occur when electrostatic and coordination interactions between Al³⁺ and the carboxylate groups on the GO sheet edges are more extensive than Al³⁺-π interactions between basal planes.

Understanding water transport through graphene-based nanochannels via experimental control of slip length

The water transport along graphene-based nanochannels has gained significant interest. However, experimental access to the influence of defects and impurities on transport poses a critical knowledge gap. Here, we investigate the water transport of cation intercalated graphene oxide membranes. The cations act as water-attracting impurities on the channel walls. Via water transport experiments, we show that the slip length of the nanochannels decay exponentially with the hydrated diameter of the intercalated cations, confirming that water transport is governed by the interaction between water molecules and the impurities on the channel wall. The exponential decay of slip length approximates non-slip conditions. This offers experimental support for the use of the Hagen-Poiseuille equation in graphene-based nanochannels, which was previously only confirmed by simulations. Our study gives valuable feedback to theoretical predictions of the water transport along graphene-based channels with water-attracting impurities.

Using Al3+ to Tailor Graphene Oxide Nanochannels: Impact on Membrane Stability and Permeability

Graphene oxide (GO) membranes, which form from the lamination of GO sheets, attract much attention due to their unique nanochannels. There is much interest in controlling the nanochannel structures and improving the aqueous stability of GO membranes so they can be effectively used in separation and filtration applications. This study employed a simple yet effective method of introducing trivalent aluminum cations to a GO sheet solution through the oxidation of aluminum foil, which modifies the nanochannels in the self-assembled GO membrane by increasing the inter-sheet distance while decreasing intra-sheet spacing. The Al³⁺ modification resulted in an increase in membrane stability in water, methanol, ethanol, and propanol, yet decreased membrane permeability to water and propanol. These changes were attributed to strong interactions between Al³⁺ and the membrane oxygenated functional groups, which resulted in an increase in membrane hydrophobicity and a decrease in the intra-sheet spacing as supported by surface tension, contact angle, atomic force microscopy, and X-ray photoelectron spectroscopy measurements. Our approach for forming Al³⁺ modified GO membranes provides a method for improving the aqueous stability and tailoring the permeation selectivity of GO membranes, which have the potential to be implemented in vapor separation and fuel purification applications.

Cross-linked laminar graphene oxide membranes for wastewater treatment and desalination: A review

Two-dimensional (2D) lamellar graphene oxide (GO) membranes are emerging as attractive materials for molecular separation in water treatment because of their single atomic thickness, excellent hydrophilicity, large specific surface areas, and controllable properties. To yet, commercialization of GO laminar membranes has been hindered by their propensity to swell in hydrated conditions. Thus, chemical crosslinking of GO sheets with the polymer matrix is used to improve GO membrane hydration stability. This review focuses on pertinent themes such as how chemical crosslinking improves the hydration stability, separation performance, and antifouling properties of GO membranes.

Improving stability and separation performance of graphene oxide/graphene nanofiltration membranes by adjusting the laminated regularity of stacking-sheets

The laminated graphene oxide (GO) membranes are promising alternatives in the field of nanofiltration due to their unique stacked interlayer structure and controllable molecular transport channels. However, it is still challenging to obtain satisfactory physical stability and separation performance to meet its practical application. In this study, a novel GO/Gr (graphene) nanofiltration membrane with high stability was engineered by post-hot-pressure treatment, following forward pressure filtration. The impact of GO/Gr loading ratio of the composites nanofiltration membranes for the permeability, selectivity, hydrophilicity and physical stability was investigated. The GO/Gr nanofiltration membranes exhibited high stability and separation performance because of the enhanced regularity and smoothness of the overall stacking layers. It was demonstrated that the satisfactory permeability (12.8-20 L·m^-2·h^-1) of GO/Gr nanofiltration membranes could be achieved. Compared with the pure GO membranes, GO/Gr-0.5 membranes exhibited a higher Na₂SO₄, NaCl, MgCl₂, and MgSO₄ rejection rate of approximately 78.3%, 51.2%, 34.5% and 32.6%, respectively. Meanwhile, the rejection rate (99.5%, 99.9%, 97.3% and 98.6%) of composite membranes for Methylene blue, Congo red, Rhodamine B and Methyl orange could be achieved. This facile way reveals the potential of stacked GO/Gr membranes in developing GO-based nanofiltration membranes.

Enhancing the Dye-Rejection Efficiencies and Stability of Graphene Oxide-Based Nanofiltration Membranes via Divalent Cation Intercalation and Mild Reduction

Laminar graphene oxide (GO) membranes have demonstrated great potential as next-generation water-treatment membranes because of their outstanding performance and physicochemical properties. However, solute rejection and stability deterioration in aqueous solutions, which are caused by enlarged nanochannels due to hydration and swelling, are regarded as serious issues in the use of GO membranes. In this study, we attempt to use the crosslinking of divalent cations to improve resistance against swelling in partially reduced GO membranes. The partially reduced GO membranes intercalated by divalent cations (i.e., Mg²⁺) exhibited improved dye-rejection efficiencies of up to 98.40%, 98.88%, and 86.41% for methyl orange, methylene blue, and rhodamine B, respectively. In addition, it was confirmed that divalent cation crosslinking and partial reduction could strengthen mechanical stability during testing under harsh aqueous conditions (i.e., strong sonication).

Tuning Transport in Graphene Oxide Membrane with Single-site Copper (II) Cations

Controlling the ion transport through graphene oxide (GO) membrane is challenging, particularly in the aqueous environment due to its strong swelling tendency. Fine-tuning the interlayer spacing and chemistry is critical to create highly selective membranes. We investigate the effect of single-site divalent cations in tuning GO membrane properties. Competitive ionic permeation test indicates that Cu²⁺ cations dominate the transport through the 2D channels of GO membrane over other cations (Mg²⁺/Ca²⁺/Co²⁺). Without/With the single-site M²⁺ modifications, pristine GO, Mg-GO, Ca-GO, and Cu-GO membranes show interlayer spacings of ∼13.6, 15.6, 14.5, and 12.3 Å in wet state, respectively. The Cu-GO membrane shows a two-fold decrease of NaCl (1 M) permeation rate comparing to pristine GO, Mg-GO, and Ca-GO membranes. In reverse osmosis tests using 1000 ppm NaCl and Na₂SO₄ as feeds, Cu-GO membrane shows rejection of ∼78% and ∼94%, respectively, which are 5%–10% higher than its counterpart membranes.

•

Single-site Cu²⁺ decreases the interlayer spacing of wet graphene oxide membrane

•

Single-site Cu²⁺ modifications can enhance salt rejection