Interfacial Reaction-Induced Defect Engineering: Enhanced Visible and Near-Infrared Absorption of Wide Band Gap Metal Oxides with Abundant Oxygen Vacancies

The Role of Oxygen Vacancies in Phase Transition and the Optical Absorption Properties within Nanocrystalline ZrO2

Zirconia (ZrO2) nanoparticles were synthesized using a solvothermal method under varying synthesis conditions, namely acidic, neutral, and alkaline. X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) were leveraged to investigate the phase evolution and topographical features in detail. The resulting crystal phase structures and grain sizes exhibited substantial variation based on these conditions. Notably, the acidic condition fostered a monoclinic phase in ZrO2, while the alkaline condition yielded a combination of tetragonal and monoclinic phases. In contrast, ZrO2 obtained under neutral conditions demonstrated a refinement in grain sizes, constrained within a 1 nm scale upon an 800 °C thermal treatment. This was accompanied by an important transformation from a monoclinic phase to tetragonal phase in the ZrO2. Furthermore, a rigorous examination of XPS data and a UV-visible spectrometer (UV-vis) analysis revealed the significant role of oxygen vacancies in phase stabilization. The notable emergence of new energy bands in ZrO2, in stark contrast to the intrinsic bands observed in a pure monoclinic sample, are attributed to these oxygen vacancies. This research offers valuable insights into the novel energy bands, phase stability, and optical absorption properties influenced by oxygen vacancies in ZrO2. Moreover, it proposes an innovative energy level model for zirconia, underpinning its applicability in diverse technological areas.

Unraveling the molecular and growth mechanism of colloidal black In2O3-x

Black metal oxides with varying concentrations of O-vacancies display enhanced optical and catalytic properties. However, direct solution syntheses of this class of materials have been limited despite being highly advantageous given the different synthetic handles that can be leveraged towards control of the targeted material. Herein, we present an alternate colloidal synthesis of black In2O3-x nanoparticles from the simple reaction between In(acac)3 and oleyl alcohol. Growth studies by PXRD, TEM, and STEM-EDS coupled to mechanistic insights from 1H, 13C NMR revealed the particles form via two paths, one of which involves In0. We also show that variations in the synthesis atmosphere, ligand environment, and indium precursor can inhibit formation of the black In2O3-x. The optical spectrum for the black nanoparticles displayed a significant redshift when compared to pristine In2O3, consistent with the presence of O-vacancies. Raman spectra and surface analysis also supported the presence of surface oxygen vacancies in the as-synthesized black In2O3-x.

Oxygen defects engineering and structural strengthening of hydrated vanadium oxide cathode by coating glucose hydrothermal carbon and pre-embedding Mn (II) ion for high-capacity aqueous zinc ion batteries

Vanadium oxide-based cathode with unique layered structure is considered as a candidate for aqueous zinc ion batteries (AZIBs). Unfortunately, considering poor electronic conductivity, sluggish diffusion kinetics, and the destruction of layered structures in the cycling process, the actual capacity and rate capability are constrained. Herein, the glucose hydrothermal carbon (GHC) and transition metal Mn2+ ion have been utilized to incorporate hydrated vanadium oxide (Mn-VOH@GHC). The oxygen vacancies defects of VOH, induced by GHC anchored on surface and Mn2+ inserted between interlayers, provides more active sites, higher electronic conductivity, and faster ion diffusion. In addition, GHC reinforces the integrity of external structure, while Mn2+ ion acts as structural pillars to support the interlayer structure. The Mn-VOH@GHC electrode can produce a high capacity of 530 mAh/g at the current density of 0.2 A/g thanks to these crucial properties, and after 2000 cycles at a high current density of 2 A/g, it can also produce a reversible capacity of 344 mAh/g. The results suggest that the synergistic effect of defect engineering and metal ion pre-insertion provides a new idea in enhancement of the electrochemical performance of AZIBs cathode materials.

Theory and Simulation of Metal-Insulator-Semiconductor (MIS) Photoelectrodes

A metal-insulator-semiconductor (MIS) structure is an attractive photoelectrode-catalyst architecture for promoting photoelectrochemical reactions, such as the formation of H₂ by proton reduction. The metal catalyzes the generation of H₂ using electrons generated by photon absorption and charge separation in the semiconductor. The insulator layer between the metal and the semiconductor protects the latter element from photo-corrosion and, also, significantly impacts the photovoltage at the metal surface. Understanding how the insulator layer determines the photovoltage and what properties lead to high photovoltages is critical to the development of MIS structures for solar-to-chemical energy conversion. Herein, we present a continuum model for charge-carrier transport from the semiconductor to the metal with an emphasis on mechanisms of charge transport across the insulator. The polarization curves and photovoltages predicted by this model for a Pt/HfO₂/p-Si MIS structure at different HfO₂ thicknesses agree well with experimentally measured data. The simulations reveal how insulator properties (i.e., thickness and band structure) affect band bending near the semiconductor/insulator interface and how tuning them can lead to operation closer to the maximally attainable photovoltage, the flat-band potential. This phenomenon is understood by considering the change in tunneling resistance with insulator properties. The model shows that the best MIS performance is attained with highly symmetric semiconductor/insulator band offsets (e.g., BeO, MgO, SiO₂, HfO₂, or ZrO₂ deposited on Si) and a low to moderate insulator thickness (e.g., between 0.8 and 1.5 nm). Beyond 1.5 nm, the density of filled interfacial trap sites is high and significantly limits the photovoltage and the solar-to-chemical conversion rate. These conclusions are true for photocathodes and photoanodes. This understanding provides critical insight into the phenomena enhancing and limiting photoelectrode performance and how this phenomenon is influenced by insulator properties. The study gives guidance toward the development of next-generation insulators for MIS structures that achieve high performance.

Control of monomeric Vo's versus Vo clusters in ZrO2-x for solar-light H2 production from H2O at high-yield (millimoles gr-1 h-1)

Pristine zirconia, ZrO₂, possesses high premise as photocatalyst due to its conduction band energy edge. However, its high energy-gap is prohibitive for photoactivation by solar-light. Currently, it is unclear how solar-active zirconia can be designed to meet the requirements for high photocatalytic performance. Moreover, transferring this design to an industrial-scale process is a forward-looking route. Herein, we have developed a novel Flame Spray Pyrolysis process for generating solar-light active nano-ZrO_2−x via engineering of lattice vacancies, Vo. Using solar photons, our optimal nano-ZrO_2−x can achieve milestone H₂-production yield, > 2400 μmolg⁻¹ h⁻¹ (closest thus, so far, to high photocatalytic water splitting performance benchmarks). Visible light can be also exploited by nano-ZrO_2−x at a high yield via a two-photon process. Control of monomeric Vo versus clusters of Vo’s is the key parameter toward Highly-Performing-Photocatalytic ZrO_2−x. Thus, the reusable and sustainable ZrO_2−x catalyst achieves so far unattainable solar activated photocatalysis, under large scale production.

Recent advances in biological applications of nanomaterials through defect engineering

In recent years, defect engineering sprung up in the artificial nanomaterials (NMs) has attracted significant attention, since the physical and chemical properties of NMs could be largely optimized based on the rational control of different defect types and densities. Defective NMs equipped with the improved electric and catalytic ability, would be widely utilized as the photoelectric device and catalysts to alleviate the growing demands of industrial production and environmental treatments. In particular, considering that the features of targeting, adsorptive, loading and optical could be adjusted by the introduction of defects, numerous defective NMs are encouraged to be applied in the biological fields including bacterial inactivation, cancer therapy and so on. And this review is devoted to summarize the recent biological applications of NMs with abundant defects. Moreover, the opportunity of these defective NMs released into the surrounding environment continue to increase, the direct and indirect contact with biological molecules and organisms would be inevitable. Due to its high reactivity and adsorption triggered by defects, NMs tend to exhibit overestimate biological behaviors and effects on organisms. Thus, the sections regarding toxicological effects of NMs with abundant defects are also carried out to supplement the safety assessments of NMs and guide further applications in the industrial production and living.

One-step synthesis of black TiO2-x microspheres by ultrasonic spray pyrolysis process and their visible-light-driven photocatalytic activities

Black TiO_2-x has recently emerged as one of the most promising visible-light-driven photocatalysts, but current synthesis routes that require a reduction step are not compatible with cost-effective mass production and a relatively large particle such as microspheres. Herein, we demonstrate a simple, fast, cost-effective and scalable one-step process based on an ultrasonic spray pyrolysis for the synthesis of black TiO_2-x microspheres. The process utilizes an oxygen-deficient environment during the pyrolysis of titanium precursors to directly introduce oxygen vacancies into synthesized TiO₂ products, and thus a reduction step is not required. Droplets of a titanium precursor solution were generated by ultrasound energy and dragged with continuous N₂ flow into a furnace for the decomposition of the precursor and crystallization to TiO₂ and through such a process spherical black TiO_2-x microspheres were obtained at 900 °C. The synthesized black TiO_2-x microsphere with trivalent titanium/oxygen vacancy clearly showed the variation of physicochemical properties compared with those of white TiO₂. In addition, the synthesized microspheres presented the superior photocatalytic activity for degradation of methylene blue under visible light irradiation. This work presents a new methodology for a simple one-step synthesis of black metal oxides microspheres with oxygen vacancies for visible-light-driven photocatalysts with a higher efficiency.