Ammonium Intercalation Induced Expanded 1T-Rich Molybdenum Diselenides for Improved Lithium Ion Storage

NH4 + Pre-Intercalation and Mo Doping VS2 to Regulate Nanostructure and Electronic Properties for High Efficiency Sodium Storage

Sodium-ion hybrid capacitors (SIHCs) have attracted much attention due to integrating the high energy density of battery and high out power of supercapacitors. However, rapid Na+ diffusion kinetics in cathode is counterbalanced with sluggish anode, hindering the further advancement and commercialization of SIHCs. Here, aiming at conversion-type metal sulfide anode, taking typical VS2 as an example, a comprehensive regulation of nanostructure and electronic properties through NH4 + pre-intercalation and Mo-doping VS2 (Mo-NVS2) is reported. It is demonstrated that NH4 + pre-intercalation can enlarge the interplanar spacing and Mo-doping can induce interlayer defects and sulfur vacancies that are favorable to construct new ion transport channels, thus resulting in significantly enhanced Na+ diffusion kinetics and pseudocapacitance. Density functional theory calculations further reveal that the introduction of NH4 + and Mo-doping enhances the electronic conductivity, lowers the diffusion energy barrier of Na+, and produces stronger d-p hybridization to promote conversion kinetics of Na+ intercalation intermediates. Consequently, Mo-NVS2 delivers a record-high reversible capacity of 453 mAh g-1 at 3 A g-1 and an ultra-stable cycle life of over 20 000 cycles. The assembled SIHCs achieve impressive energy density/power density of 98 Wh kg-1/11.84 kW kg-1, ultralong cycling life of over 15000 cycles, and very low self-discharge rate (0.84 mV h-1).

Electrochemical coupling in subnanometer pores/channels for rechargeable batteries

Subnanometer pores/channels (SNPCs) play crucial roles in regulating electrochemical redox reactions for rechargeable batteries. The delicately designed and tailored porous structure of SNPCs not only provides ample space for ion storage but also facilitates efficient ion diffusion within the electrodes in batteries, which can greatly improve the electrochemical performance. However, due to current technological limitations, it is challenging to synthesize and control the quality, storage, and transport of nanopores at the subnanometer scale, as well as to understand the relationship between SNPCs and performances. In this review, we systematically classify and summarize materials with SNPCs from a structural perspective, dividing them into one-dimensional (1D) SNPCs, two-dimensional (2D) SNPCs, and three-dimensional (3D) SNPCs. We also unveil the unique physicochemical properties of SNPCs and analyse electrochemical couplings in SNPCs for rechargeable batteries, including cathodes, anodes, electrolytes, and functional materials. Finally, we discuss the challenges that SNPCs may face in electrochemical reactions in batteries and propose future research directions.

Molybdenum Sulfide Nanoflowers as Electrodes for Efficient and Scalable Lithium-Ion Capacitors

Hybrid supercapacitors (HSCs) bridge the unique advantages of batteries and capacitors and are considered promising energy storage devices for hybrid vehicles and other electronic gadgets. Lithium-ion capacitors (LICs) have attained particular interest due to their higher energy and power density than traditional supercapacitor devices. The limited voltage window and the deterioration of anode materials upsurged the demand for efficient and stable electrode materials. Two-dimensional (2D) molybdenum sulfide (MoS2) is a promising candidate for developing efficient and durable LICs due to its wide lithiation potential and unique layer structure, enhancing charge storage efficiency. Modifying the extrinsic features, such as the dimensions and shape at the nanoscale, serves as a potential path to overcome the sluggish kinetics observed in the LICs. Herein, the MoS2 nanoflowers have been synthesized through a hydrothermal route. The developed LIC exhibited a specific capacitance of 202.4 F g-1 at 0.25 A g-1 and capacitance retention of >90 % over 5,000 cycles. Using an ether electrolyte improved the voltage window (2.0 V) and enhanced the stability performance. The ex-situ material characterization after the stability test reveals that the storage mechanism in MoS2-LICs is not diffusion-controlled. Instead, the fast surface redox reactions, especially intercalation/deintercalation of ions, are more prominent for charge storage.

WS2 nanosheets vertically grown on Ti3C2 as superior anodes for lithium-ion batteries

Tungsten disulfide (WS2) is considered as a promising anode material for high-performance lithium-ion batteries (LIBs) result from its inherent characteristics such as high theoretical capacity, large interlayer spacing and weak interlayer Van der Waals force. Nevertheless, WS2 has the drawbacks of easy agglomeration, severe volume expansion and high Li+ migration barrier, which lead to rapid capacity degradation and imperfect rate ability. In this work, a novel two-dimensional (2D) hierarchical composite (Ti3C2/WS2) consisting of WS2 nanosheets vertically grown on titanium carbide (Ti3C2) nanosheets is prepared. Thanks to this distinctive hierarchical structure and synergy between WS2 and Ti3C2, the Ti3C2/WS2 composite demonstrates exceptional electrochemical performance in LIBs. In addition, we investigate the effect of the mass proportion of WS2 in Ti3C2/WS2 composite on the electrochemical performance, and find that the optimal mass ratio of WS2 is 60%. As expected, the optimal electrode exhibits a high specific capacity (650 mAh/g at 0.1 A/g after 100 cycles) and ultra-long cycle stability (400 mAh/g at 1.0 A/g after 5000 cycles).

Molecular modulation strategies for two-dimensional transition metal dichalcogenide-based high-performance electrodes for metal-ion batteries

In the past few decades, great efforts have been made to develop advanced transition metal dichalcogenide (TMD) materials as metal-ion battery electrodes. However, due to existing conversion reactions, they still suffer from structural aggregation and restacking, unsatisfactory cycling reversibility, and limited ion storage dynamics during electrochemical cycling. To address these issues, extensive research has focused on molecular modulation strategies to optimize the physical and chemical properties of TMDs, including phase engineering, defect engineering, interlayer spacing expansion, heteroatom doping, alloy engineering, and bond modulation. A timely summary of these strategies can help deepen the understanding of their basic mechanisms and serve as a reference for future research. This review provides a comprehensive summary of recent advances in molecular modulation strategies for TMDs. A series of challenges and opportunities in the research field are also outlined. The basic mechanisms of different modulation strategies and their specific influences on the electrochemical performance of TMDs are highlighted.

Pseudocapacitance-Dominated MnNb2 O6 -C Nanofiber Anode for Li-Ion Batteries

MnNb2 O6 anode has attracted much attention owing to its unique properties for holding Li ions. Unluckily, its application as a Li-ion battery anode is restricted by low capacity because of the inferior electronic conductivity and limited electron transfer. Previous studies suggest that structure and component optimization could improve its reversible capacity. This improvement is always companied by capacity increments, however, the reasons have rarely been identified. Herein, MnNb2 O6 -C nanofibers (NFs) with MnNb2 O6 nanoparticles (~15 nm) confined in carbon NFs, and the counterpart MnNb2 O6 NFs consisting of larger nanoparticles (40-100 nm) are prepared by electrospinning for clarifying this phenomenon. The electrochemical evaluations indicate that the capacity achieved by the MnNb2 O6 NF electrode presents an activation process and a degradation in subsequence. Meanwhile, the MnNb2 O6 -C NF electrode delivers high reversible capacity and ultra-stable cycling performance. Further analysis based on electrochemical behaviors and microstructure changes reveals that the partial structure rearrangement should be in charge of the capacity increment, mainly including pseudocapacitance increment. This work suggests that diminishing the dimensions of MnNb2 O6 nanoparticles and further confining them in a matrix could increase the pseudocapacitance-dominated capacity, providing a novel way to improve the reversible capacity of MnNb2 O6 and other intercalation reaction anodes.

Two-dimensional materials for high density, safe and robust metal anodes batteries

With a high specific capacity and low electrochemical potentials, metal anode batteries that use lithium, sodium and zinc metal anodes, have gained great research interest in recent years, as a potential candidate for high-energy-density storage systems. However, the uncontainable dendrite growth during the repeated charging process, deteriorates the battery performance, reduces the battery life and more importantly, raises safety concerns. With their unique properties, two-dimensional (2D) materials, can be used to modify various components in metal batteries, eventually mitigating the dendrite growth, enhancing the cycling stability and rate capability, thus leading to safe and robust metal anodes. In this paper, we review the recent advances of 2D materials and summarize current research progress of using 2D materials in the applications of (i) anode design, (ii) separator engineering, and (iii) electrolyte modifications by guiding metal ion nucleation, increasing ion conductivity, homogenizing the electric field and ion flux, and enhancing the mechanical strength for safe metal anodes. The 2D material modifications provide the ultimate solution for obtaining dendrite-free metal anodes, realizes the high energy storage application, and indicates the importance of 2D materials development. Finally, in-depth understandings of subsequent metal growth are lacking due to research limitations, while more advanced characterizations are welcome for investigating the metal deposition mechanism. The more facile and simplified preparation of 2D materials possess great prospects in high energy density metal anode batteries, and thus fulfils the development of EVs.

Freestanding ReS2/Graphene Heterostructures as Binder-Free Anodes for Lithium-Ion Batteries

It is still challenging to develop anode materials with high capacity and long cycling stability for lithium-ion batteries (LIBs). To address such issues, herein, for the first time, we present a three-dimensional and freestanding ReS₂/graphene heterostructure (3DRG) as an anode synthesized via a one-pot hydrothermal method. The hybrid shows a hierarchically sandwich-like, nanoporous, and conductive three-dimensional (3D) network constructed by two-dimensional (2D) ReS₂/graphene heterostructural nanosheets, which can be directly utilized as a freestanding and binder-free anode for LIBs. When the current density is 100 mA g^-1, the 3DRG anode delivers a high reversible specific capacity of 653 mAh g^-1. The 3DRG anode also delivers higher rate capability and cycling stability than the bare ReS₂ anode. The markedly boosted electrochemical properties derive from the unique nanoarchitecture, which guarantees massive electrochemical active sites, short channels of lithium-ion diffusion, fast electron/ion transportation, and inhibition of the volume change of ReS₂ for LIBs.

Heteroatom (B, N, P, and S)-Doped Cyclodextrin as a Hydroxyurea (HU) Drug Nanocarrier: A Computational Approach

Theoretical examination of hydroxyurea adsorption capabilities toward the cyclodextrin surface for proper drug delivery systems was carried out utilizing DFT simulations. The study aims to assess the efficacy of doped cyclodextrin (doped with boron, nitrogen, phosphorus, and sulfur atoms) in increasing its stability and efficiency in intermolecular interactions, hence facilitating optimal drug delivery. The adsorption energies were found to follow a decreasing order of B@ACD-HU>N@ACD-HU>P@ACD-HU>S@ACD-HU with energies of -0.046, -0.0326, -0.015, and 0.944 kcal/mol, respectively. The S@ACD-HU complex, unlike previous systems, had a physical adsorption energy. The N@ACD-HU and B@ACD-HU complexes had the shortest bond lengths of 1.42 Å (N122-C15) and 1.54 Å (B126-C15), respectively. The HOMO and LUMO values were also high in identical systems, -6.367 and -2.918 eV (B@ACD-HU) and -6.278 and -1.736 eV (N@ACD-HU), respectively, confirming no chemical interaction. The N@ACD-HU has the largest energy gap of 4.54 eV. For the QTAIM analysis and plots, the maximum electron density and ellipticity index were detected in B@ACD-HU, 0.600 au (H70-N129) and 0.8685 au (H70-N129), respectively, but N@ACD-HU exhibited a high Laplacian energy of 0.7524 a.u (H133-N122). The fragments' TDOS, OPDOS, and PDOS exhibited a strong bond interaction of greater than 1, and they had different Fermi levels, with the highest value of -8.16 eV in the N@ACD-HU complex. Finally, the NCI analysis revealed that the complexes were noncovalent. According to the literature, the van der Waals form of interactions is used in the intermolecular forces of cyclodextrin cavities. The B@ACD-HU and N@ACD-HU systems were more greenish in color with no spatial interaction. These two systems have outperformed other complexes in intermolecular interactions, resulting in more efficient drug delivery. They had the highest negative adsorption energies, the shortest bond length, the highest HOMO/LUMO energies, the highest energy gap, the highest stabilization energy, the strongest bonding effect, the highest electron density, the highest ellipticity index, and a strong van der Waals interaction that binds the drug and the surface together.

Bond modulation of MoSe2+x driving combined intercalation and conversion reactions for high-performance K cathodes

The urgent demand for large-scale global energy storage systems and portable electronic devices is driving the need for considerable energy density and stable batteries. Here, Se atoms are introduced between MoSe₂ layers (denoted as MoSe_2+x ) by bond modulation to produce a high-performance cathode for potassium-ion batteries. The introduced Se atoms form covalent Se-Se bonds with the Se in MoSe₂, and the advantages of bond modulation are as follows: (i) the interlayer spacing is enlarged which increases the storage space of K⁺; (ii) the system possesses a dual reaction mechanism, and the introduced Se can provide an additional conversion reaction when discharged to 0.5 V, which improves the capacity further; (iii) the Se atoms confined between MoSe₂ layers do not give rise to the shuttle effect. MoSe_2+x is compounded with rGO (MoSe_2+x -rGO) as a cathode for potassium-ion batteries and displays an ultrahigh capacity (235 mA h g^-1 at 100 mA g^-1), a long cycle life (300 cycles at 100 mA g^-1) and an extraordinary rate performance (135 mA h g^-1 at 1000 mA g^-1 and 89 mA h g^-1 at 2000 mA g^-1). Pairing the MoSe_2+x -rGO cathode with graphite, the full cell delivers considerable energy density compared to other K cathode materials. The MoSe_2+x -rGO cathode also exhibits excellent electrochemical performance for lithium-ion batteries. This study on bond modulation driving combined intercalation and conversion reactions offers new insights into the design of high-performance K cathodes.

Layer-Structured Anisotropic Metal Chalcogenides: Recent Advances in Synthesis, Modulation, and Applications

The unique electronic and catalytic properties emerging from low symmetry anisotropic (1D and 2D) metal chalcogenides (MCs) have generated tremendous interest for use in next generation electronics, optoelectronics, electrochemical energy storage devices, and chemical sensing devices. Despite many proof-of-concept demonstrations so far, the full potential of anisotropic chalcogenides has yet to be investigated. This article provides a comprehensive overview of the recent progress made in the synthesis, mechanistic understanding, property modulation strategies, and applications of the anisotropic chalcogenides. It begins with an introduction to the basic crystal structures, and then the unique physical and chemical properties of 1D and 2D MCs. Controlled synthetic routes for anisotropic MC crystals are summarized with example advances in the solution-phase synthesis, vapor-phase synthesis, and exfoliation. Several important approaches to modulate dimensions, phases, compositions, defects, and heterostructures of anisotropic MCs are discussed. Recent significant advances in applications are highlighted for electronics, optoelectronic devices, catalysts, batteries, supercapacitors, sensing platforms, and thermoelectric devices. The article ends with prospects for future opportunities and challenges to be addressed in the academic research and practical engineering of anisotropic MCs.

Recent advances in metallic transition metal dichalcogenides as electrocatalysts for hydrogen evolution reaction

Layered metallic transition metal dichalcogenides (MTMDs) exhibit distinctive electrical and catalytic properties to drive basal plane activity, and, therefore, they have emerged as promising alternative electrocatalysts for sustainable hydrogen evolution reactions (HERs). A key challenge for realizing MTMDs-based electrocatalysts is the controllable and scalable synthesis of high-quality MTMDs and the development of engineering strategies that allow tuning their electronic structures. However, the lack of a method for the direct synthesis of MTMDs retaining the structural stability limits optimizing the structural design for the next generation of robust electrocatalysts. In this review, we highlight recent advances in the synthesis of MTMDs comprising groups VB and VIB and various routes for structural engineering to enhance the HER catalytic performance. Furthermore, we provide insight into the potential future directions and the development of MTMDs with high durability as electrocatalysts to generate green hydrogen through water-splitting technology.

Mechanisms for self-templating design of micro/nanostructures toward efficient energy storage

The ever-growing demand in modern power systems calls for the innovation in electrochemical energy storage devices so as to achieve both supercapacitor-like high power density and battery-like high energy density. Rational design of the micro/nanostructures of energy storage materials offers a pathway to finely tailor their electrochemical properties thereby enabling significant improvements in device performances and enormous strategies have been developed for synthesizing hierarchically structured active materials. Among all strategies, the direct conversion of precursor templates into target micro/nanostructures through physical and/or chemical processes is facile, controllable, and scalable. Yet the mechanistic understanding of the self-templating method is lacking and the synthetic versatility for constructing complex architectures is inadequately demonstrated. This review starts with the introduction of five main self-templating synthetic mechanisms and the corresponding constructed hierarchical micro/nanostructures. Subsequently, the structural merits provided by the well-defined architectures for energy storage are elaborately discussed. At last, a summary of current challenges and future development of the self-templating method for synthesizing high-performance electrode materials is also presented.

Design of Vertically Aligned Two-Dimensional Heterostructures of Rigid Ti3C2TX MXene and Pliable Vanadium Pentoxide for Efficient Lithium Ion Storage

Designing a thick electrode with appropriate mass loading is a prerequisite toward practical applications for lithium ion batteries (LIBs) yet suffers severe limitations of slow electron/ion transport, unavoidable volume expansion, and the involvement of inactive additives, which lead to compromised output capacity, poor rate perforamnce, and cycling instability. Herein, self-supported thick electrode composed of vertically aligned two-dimensional (2D) heterostructures (V-MXene/V₂O₅) of rigid Ti₃C₂T_X MXene and pliable vanadium pentoxide are assembled via an ice crystallization-induced strategy. The vertical channels prompt fast electron/ion transport within the entire electrode; in the meantime, the 3D MXene scaffold provides mechanical robustness during lithiation/delithiation. The optimized electrodes with 1 and 5 mg cm^-2 of V-MXene/V₂O₅ respectively deliver 472 and 300 mAh g^-1 at a current density of 0.2 A g^-1, rate performance with 380 and 222 mAh g^-1 retained at 5 A g^-1, and reliability over 800 charge/discharge cycles.

2D material-based peroxidase-mimicking nanozymes: catalytic mechanisms and bioapplications

The boom in nanotechnology brings new insights into the development of artificial enzymes (nanozymes) with ease of modification, lower manufacturing cost, and higher catalytic stability than natural enzymes. Among various nanomaterials, two-dimensional (2D) nanomaterials exhibit promising enzyme-like properties for a plethora of bioapplications owing to their unique physicochemical characteristics of tuneable composition, ultrathin thickness, and huge specific surface area. Herein, we review the recent advances in several 2D material-based nanozymes, such as carbonaceous nanosheets, metal-organic frameworks (MOFs), transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), and transition metal oxides (TMOs), clarify the mechanisms of peroxidase (POD)-mimicking catalytic behaviors, and overview the potential bioapplications of 2D nanozymes.

Enhanced Jahn-Teller distortion boosts molybdenum trioxide's superior lithium ion storage capability

Upgrading the energy density and cycling life of current lithium ion batteries is urgently needed for developing advanced portable electronics and electric vehicles. Amorphous transition metal oxides (TMO) with inherent lattice disorders exhibit enormous potential as electrode materials owing to their high specific capacity, fast ion diffusion, and excellent cyclic stability. Yet, challenges remain in their controllable synthesis. In this study, the amorphous phase is induced into α-MoO₃ crystal nanobelts at room temperature with the aid of Jahn-Teller effect via enhanced lattice distortion triggered by the accumulation of low-valent molybdenum centers. The optimized HI-MoO₃-36 h exhibits high reversible capacities of 886.0 at 0.1 A g^-1 and 491.1 mA h g^-1 at 1.0 A g^-1, respectively, along with outstanding stability retaining 83.4% initial capacity after 100 cycles at 0.1 A g^-1. The crystal engineering strategy proposed in this work is believed to be a salutary reference towards the synthesis of high-performance TMO anodes for energy storage applications.

Promoting effect of MXenes on 1T/2H–MoSe2 for hydrogen evolution

The 1T/2H–MoSe₂/Ti₃C₂ composites integrated via a facile hydrothermal method exhibit an optimal overpotential of 150 mV at 10 mA cm⁻² in 1 M KOH, indicating that Ti₃C₂ is an ideal conductive support for building highly efficient electrocatalysts.