Highly Stable, Nondestructive, and Simple Visualization of Latent Blood Fingerprints Based on Covalent Bonding Between the Fluorescent Conjugated Polymer and Proteins in Blood

Colloidal Polymer Nanoparticles as Smart Inks for Authentication and Indication of Latent Fingerprints and Scratch

An environmentally friendly smart ink was developed by incorporating fluorescein into functionalized poly(methyl methacrylate) (PMMA) nanoparticles synthesized using an emulsifier-free emulsion copolymerization approach. The functional comonomers of 2-(dimethylamino)ethyl methacrylate (DMAEMA), acrylamide, hydroxyethyl methacrylate, and glycidyl methacrylate in 10 wt % with respect to methyl methacrylate were used to obtain the functionalized colloidal PMMA nanoparticles. Functional groups of the latex nanoparticles were characterized by Fourier-transform infrared spectroscopy. Field emission scanning electron microscopy results showed that all of the latex nanoparticles have nearly spherical morphologies with variations in size and surface smoothness due to the presence of different comonomers. Ultraviolet-visible and fluorescence spectra indicated that the fluorescein-doped latex nanoparticles containing the DMAEMA comonomer had the highest absorbance and fluorescence intensity. In the alkaline media, fluorescein turns to a dianion, showing a red shift and increased absorbance in the UV-vis spectroscopy. In addition, the electron inductive characteristics of the tertiary amine groups result in enhancing the conjugation of fluorescein molecules and increasing the fluorescence intensities. Therefore, the colloidal nanoparticles with amine functional groups were used in the formulation of a smart ink with applications in securing documents and fingerprints, encrypting banknotes and money, detecting latent fingerprints, crafting anticounterfeiting paper, and eventually providing optical detection and indication of surface scratches.

Multifunctional Eu(III)-modified HOFs: roxarsone and aristolochic acid carcinogen monitoring and latent fingerprint identification based on artificial intelligence

The exploration of multifunctional materials and intelligent technologies used for fluorescence sensing and latent fingerprint (LFP) identification is a research hotspot of material science. In this study, an emerging crystalline luminescent material, Eu3+-functionalized hydrogen-bonded organic framework (Eu@HOF-BTB, Eu@1), is fabricated successfully. Eu@1 can emit purple red fluorescence with a high photoluminescence quantum yield of 36.82%. Combined with artificial intelligence (AI) algorithms including support vector machine, principal component analysis, and hierarchical clustering analysis, Eu@1 as a sensor can concurrently distinguish two carcinogens, roxarsone and aristolochic acid, based on different mechanisms. The sensing process exhibits high selectivity, high efficiency, and excellent anti-interference. Meanwhile, Eu@1 is also an excellent eikonogen for LFP identification with high-resolution and high-contrast. Based on an automatic fingerprint identification system, the simultaneous differentiation of two fingerprint images is achieved. Moreover, a simulation experiment of criminal arrest is conducted. By virtue of the Alexnet-based fingerprint analysis platform of AI, unknown LFPs can be compared with a database to identify the criminal within one second with over 90% recognition accuracy. With AI technology, HOFs are applied for the first time in the LFP identification field, which provides a new material and solution for investigators to track criminal clues and handle cases efficiently.

Strongly Fluorescent Conjugated Polymer Nanoparticles in Aqueous Colloidal Solution for Universal, Efficient and Effective Development of Sebaceous and Blood Fingerprints

Taking the same developing strategy for different types of latent fingerprints is helpful in improving the efficiency of criminal investigation. Here we advanced a new strategy based on amino-functionalized poly(p-phenylenevinylene) nanoparticles (PPV-brPEI NPs) in aqueous colloidal solution as the developing reagent. The desirable amino functionality and strong emission of NPs were simultaneously realized by adding branched polyethyleneimine (brPEI) during the process of thermal elimination of the PPV polymer precursor. The NPs were demonstrated to have negligible effects on the extraction of biological information from DNA. Using the PPV-brPEI NPs-soaked cotton pad, both latent sebaceous fingerprints (LSFPs) and latent blood fingerprints (LBFPs) can be effectively developed on different nonporous substrates. This strategy was highly sensitive and effective for aged, contaminated and moldy fingerprints. Additionally, the developed fingerprints could tolerate humidity environment and the alcohol atmosphere. The mechanism investigation suggests that interaction between PPV-brPEI NPs and sebum ingredients contributes to the development of LSFPs and interaction between PPV-brPEI NPs and proteins in blood contributes to the development of LBFPs, but the former is not as stable as the latter. This work provides a simple, environment/operator-friendly strategy for efficient fingerprint development, which is very promising for practical criminal investigations.

Recent Advances in Enhancement Techniques for Blood Fingerprints

The blood fingerprint enhancement is not so eye-catching as latent fingerprint development in forensic community, but it is indeed an important piece of evidence for personal identification, forensic analysis and even reconstruction of crime scenes. In over past ten years, novel reagents, advanced materials and emerging techniques have growingly participated in blood fingerprint enhancement, which not only leads to a higher level of developing sensitivity, selectivity and contrast, but also endows blood impressions with more forensic significance. This review summarizes recent advances in conventional chemical reagents targeting at heme, protein and amino acid as well as emerging enhancement techniques based on advanced materials, new equipment or methods. Some critical issues in forensic science are also discussed, including partial blood fingerprint enhancement, false positive of developing reagents, the compatibility of blood enhancement technique and DNA, fingerprint age determination, and so on. Finally, we have proposed several urgent problems to be solved and the prospects of some promising techniques were proposed in the field of blood fingerprint enhancement in future work.

Synthesis of Mesoporous SiO2 coating containing chlorine phenol formaldehyde resin (Cl-PFR) composites for effective fingerprint detection

As a kind of non-metals fluorescent reagent, the containing chlorine phenol-formaldehyde resin (Cl-PFR) nanoparticles (NPs) were synthesized with the facile method. The as-synthesized Cl-PFR nanoparticles can emit strong green fluorescence emission under the irradiation of 365nm UV light. Since mesoporous silica nanoparticles (MSNs) NPs have a large specific area, strong adsorption, and uniform dispersion, the MSN coating Cl-PFR composites were prepared by mixing Cl-PFR and MSN NPs together. Thus, the as-synthesized multifunctional composites combine the advantages of green fluorescence Cl-PFR, and strong adhesion MSN was applied to detect the potential fingerprint. Different bases fingerprints (glass, paper, aluminum sheets, rough stones, tape) can be clearly observed in the presence of the Cl-PFR@MSN-NH₂ composites. Furthermore, the aging three months and washed with water several times fingerprint can also be clearly displayed with the multifunctional composites. This study provided a simple, economical, and non-toxic fluorescent reagent for the application in fingerprint detection.

Dynamic Fluorescent Anti-Counterfeiting Labels Based on Conjugated Polymers Confined in Submicron Fibrous Membranes

Developing a new anti-counterfeiting strategy is of great significance to combating the global counterfeiting problem. Here we report the construction of a dynamic fluorescence response system for anti-counterfeiting by combining the photochromism induced by the ring-opening of spiropyran (SP) to merocyanine (MC) with the fluorescence resonance energy transfer (FRET) between the conjugated polymer and MC. After elucidating the design principle, a new conjugated polymer, PPETE-SP, consisting of a poly[p-(phenylene ethynylene)-alt-(thienylene-ethynylene)] (PPETE) backbone with pendant SP, was synthesized and characterized. With poly(methyl methacrylate) (PMMA) as the matrix, the PPETE-SP/PMMA fibrous membrane was prepared via electrospinning. Under the irradiation of UV light, the fluorescent color of the membrane dynamically changed from green to light green, then light pink, and finally pink, and this process was reversible under visible light. The fluorescence emission switch was examined for 10 cycles and proved to have good repeatability, indicating that the membrane can be directly used as an anti-counterfeiting label for multiple verifications. The FRET efficiency was found to be about 61% based on the FRET study with confocal laser scanning microscopy. The covalent bonding between PPETE backbone and SP, the confinement of PPETE-SP chains in the fibrous membrane, as well as employing PMMA as the matrix were demonstrated to be crucial in realizing the photochromism and the FRET. Different anti-counterfeiting modes were proposed, providing rich selections for operation of verification. Such facile-to-operate and hard-to-imitate dynamic fluorescent responsive materials are very promising for use in practical anti-counterfeiting applications.

Chemical-Based Surface Plasmon Resonance Imaging of Fingerprints

Fingerprints are extremely useful in personal identification; however, they are usually based on physical rather than chemical images because it remains a challenge to reveal a clear chemical fingerprint easily and sensitively. Herein, a surface plasmon resonance imaging (SPRi) method, combined with a chemically selective stepwise signal amplification (CS³A) strategy, is proposed to chemically image fingerprints with adjustable sensitivity and clarity. High-fidelity glucose-associated fingerprint images were obtained at five to seven cycles of CS³A based on the recognition reaction of concanavalin A (ConA) with dextran. The method is also extendable to image substances that possess and/or can be tagged with ConA- or dextran-recognizable groups. For demonstration, SPRi of carboxylic substances was conducted by amidating the carboxyl group with glucosamine to enable the ConA-based CS³A. Glucose- and carboxyl-based fingerprints were simultaneously and clearly imaged, allowing us to perform quantitative analysis of the representative of either glucose or amino acid (e.g., serine) or both. The curves measured from the standard spots were linear in the ranges of 1-4000 μM for glucose and 3.2-4000 μM for serine, with linear correlated coefficients of 0.9979 and 0.9962, respectively. It was then applied to the study of metabolic secretions in fingerprints during running exercise, yielding variation tendencies similar to those measured from sweat samples in the literature. As a noninvasive tool, the CS³A-coupled SPRi reveals both clear images of fingerprints and quantitative chemical information, and it is anticipated to become a competitive new method for chemically imaging fingerprints.

pH-Triggered Transition from Micellar Aggregation to a Host-Guest Complex Accompanied by a Color Change

A pH-triggered transition from micellar aggregation to a host-guest complex was achieved based on the supramolecular interactions between calixpyridinium and pyrroloquinoline quinone disodium salt (PQQ-2Na) accompanied by a color change. Our design has the following three advantages: (1) a regular spherical micellar assembly is fabricated by the supramolecular interactions between calixpyridinium and PQQ-2Na at pH 6 in an aqueous solution, (2) increasing the pH can lead to a transition from micellar aggregation to a host-guest complex due to the deprotonation of calixpyridinium, and at the same time (3) increasing the pH can lead to a color change owing to the deprotonation of calixpyridinium and the complexation of deprotonated calixpyridinium with PQQ-2Na. Benefitting from the low toxicity of calixpyridinium and PQQ-2Na, this pH-induced transition from micellar aggregation to a host-guest complex was further studied as a controllable-release model.

Preparation of Novel Magnetic Nanomaterials Based on "Facile Coprecipitation" for Developing Latent Fingerprints (LFP) in Crime Scenes

Recently, the application of novel nanomaterials, especially magnetic nanomaterials in the development of latent fingerprints (LFP), has become the hot focus for forensic scientists and criminal investigators. As a type of recyclable, environment-friendly material, Fe₃O₄ nanoparticles achieve a wonderful effect in visualization of LFP. We first report the synthesis and encapsulation of nano-Fe₃O₄ through "facile coprecipitation", (3-mercaptopropyl)triethoxysilane was covalently embedded into Fe₃O₄ nanoparticles, and the Fe₃O₄ core was encapsulated by the nanosilver to prepare novel magnetic nanomaterials (P-MNP@Ag) with the core-shell configuration. For comparison, the magnetic nanomaterials (S-MNP@Ag) were prepared by surface modification. Their composition, structure, and properties were characterized by SEM, TEM, XRD, IR, XPS, and VSM. Compared with commercially available gold powder, silver powder, bare magnetic powder, and prepared S-MNP@Ag, the development effect of LFP on different objects by using P-MNP@Ag had better performance, which presented the advantages of low background interference, high sensitivity, and clear secondary details in LFP. In the crime scenes of some influential cases, P-MNP@Ag had been applied to the visualization of LFP. The biometric identification of criminal suspects was confirmed through fingerprint comparison, which was highly affirmed by the public security department.

Nontraditional Luminescent Molecular Aggregates Encapsulated by Wormlike Silica Nanoparticles for Latent Fingerprint Detection

The phenomenon of nontraditional luminescence has attracted wide attention and curiosity of researchers due to its inexplicable photoluminescence paradigm without aromatic or extended π-systems. The present work puts forward a neotype of a light-emitting nitrogenous small molecule, namely, N-stearoyl-hydroxyproline (L-C₁₆-Hyp), which could emit weak light in aggregation states through the restriction mechanism of intramolecular motion, exhibiting properties comparable to those of AIEgens. Using these molecular aggregates as anionic surfactant micelles to incorporate within the silica matrix, we prepared fluorescent nanoparticles (FL-NPs) by a one-pot method for expedient visualization of latent fingerprints (LFPs). The FL-NPs exhibit an excitation range from 335 to 365 nm, resulting in nontraditional luminescence observed between 410 and 440 nm. The enhanced luminescent FL-NPs may derive from the collective entities or assemblies of restricted L-C₁₆-Hyp, which can be reasonably explicated by an effect termed as cluster-triggered emission (CTE). Theoretical calculations demonstrated that this luminescence pattern belongs to partial charge transfer, which is mainly attributed to the close interaction between the tertiary amino and adjacent carboxyl in the L-C₁₆-Hyp structure. Moreover, some merits of FL-NPs, such as wormlike nanomorphology, stable photophysical properties, low toxicity, great adhesion to multiple substrates, easy to get raw material, an inexpensive, simple process, and rapid detection without any further modification or assistance, provide the feasibility of efficacious LFP detection. Overall, this study will provide insights into the design and application of luminescent materials with unconventional groups.

Fluorescent Cationic Conjugated Polymer-Based Adaptive Developing Strategy for Both Sebaceous and Blood Fingerprints

Both latent sebaceous and blood fingerprints may provide valuable information for forensic investigation. To detect both types of fingerprints with no need to predistinguish them, a new adaptive developing strategy was proposed. A cationic conjugated polymer with poly[p-(phenylene ethylene)-alt-(thienylene ethynylene)] backbone (PPETE-NMe₃⁺) was synthesized, which was dissolved in N,N-dimethylformamide (DMF) to form the developing solution. Fingerprints were developed by a simple dropping and incubating process without any pre-/post-treatments. Fluorescent photographs of the developed fingerprints on various substrates demonstrated that this developing strategy was effective for both types of fingerprints on nonporous substrates. Gray value analysis further confirmed the enhancement of the legibility of the fingerprint images. The preliminary mechanism exploration suggested that certain weak interactions, such as hydrophobic interaction and electrostatic interaction, may synergistically contribute to the interaction between the polymer and fingerprint components. The molecular design of the polymer combined with an appropriate solvent endowed the developing system the adaptiveness toward different types of fingerprints. This adaptive developing strategy made the fingerprint-developing process more efficient and may be further extended to more practical application scenes.