High-Efficiency, Low-Hysteresis Planar Perovskite Solar Cells by Inserting the NaBr Interlayer

Unveiling heterogeneity of hysteresis in perovskite thin films

The phenomenon of current-voltage hysteresis observed in perovskite-based optoelectronic devices is a critical issue that complicates the accurate assessment of device parameters, thereby impacting performance and applicability. Despite extensive research efforts aimed at deciphering the origins of hysteresis, its underlying causes remain a subject of considerable debate. By employing nanoscale investigations to elucidate the relationship between hysteresis and morphological characteristics, this study offers a detailed exploration of photocurrent-voltage hysteresis at the nanoscale within perovskite optoelectronic devices. Through the meticulous analysis of localized I-V curve arrays, our research identifies two principal hysteresis descriptors, uncovering a predominantly inverted hysteresis pattern in 87% of the locations examined. This pattern is primarily attributed to the energetic barrier encountered at the interface between the probe and the perovskite material. Our findings underscore the pronounced heterogeneity and grain-dependent variability inherent in hysteresis behavior, evidenced by an average Hysteresis Index value of 0.24. The investigation suggests that the localized hysteresis phenomena cannot be exclusively attributed to either photocharge collection processes or organic cation migration at grain boundaries. Instead, it appears significantly influenced by localized surface trap states, which play a pivotal role in modulating electron and hole current dynamics. By identifying the key factors contributing to hysteresis, such as localized surface trap states and their influence on electron and hole current dynamics, our findings pave the way for targeted strategies to mitigate these effects. This includes the development of novel materials and device architectures designed to minimize energy barriers and enhance charge carrier mobility, thereby improving device performance and longevity. This breakthrough in understanding the microscale mechanisms of hysteresis underscores the critical importance of surface/interface defect trap passivation in mitigating hysteretic effects, offering new pathways for enhancing the performance of perovskite solar cells.

Defect management by a cesium fluoride-modified electron transport layer promotes perovskite solar cells

SnO₂ is a candidate material for electron transport layers (ETLs) in perovskite solar cells (PSCs). However, a large number of defects at the SnO₂/perovskite interface lead to notable non-radiative interfacial recombination. Moreover, the energy level arrangement between SnO₂/perovskite does not match well. In this study, a SnO₂/CsF-SnO₂ double-layer ETL was prepared by doping CsF into SnO₂, effectively passivating the defects of the SnO₂ ETL and SnO₂/perovskite interface. The formation of a good energy level arrangement with the perovskite layer reduces the interface non-radiative recombination and improves the performance of the interface charge extraction. The photoelectric conversion efficiency of the optimal CsF-modified PSC reached 22.18%, owing to the significant increase in the open-circuit voltage to 1.180 V.

Recent Criterion on Stability Enhancement of Perovskite Solar Cells

Perovskite solar cells (PSCs) have captured the attention of the global energy research community in recent years by showing an exponential augmentation in their performance and stability. The supremacy of the light-harvesting efficiency and wider band gap of perovskite sensitizers have led to these devices being compared with the most outstanding rival silicon-based solar cells. Nevertheless, there are some issues such as their poor lifetime stability, considerable J–V hysteresis, and the toxicity of the conventional constituent materials which restrict their prevalence in the marketplace. The poor stability of PSCs with regard to humidity, UV radiation, oxygen and heat especially limits their industrial application. This review focuses on the in-depth studies of different direct and indirect parameters of PSC device instability. The mechanism for device degradation for several parameters and the complementary materials showing promising results are systematically analyzed. The main objective of this work is to review the effectual strategies of enhancing the stability of PSCs. Several important factors such as material engineering, novel device structure design, hole-transporting materials (HTMs), electron-transporting materials (ETMs), electrode materials preparation, and encapsulation methods that need to be taken care of in order to improve the stability of PSCs are discussed extensively. Conclusively, this review discusses some opportunities for the commercialization of PSCs with high efficiency and stability.

Deciphering the Reduced Loss in High Fill Factor Inverted Perovskite Solar Cells with Methoxy-Substituted Poly(Triarylamine) as the Hole Selective Contact

A dopant-free polymeric hole selective contact (HSC) layer is ubiquitous for stable perovskite solar cells (PSCs). However, the intrinsic nonwetting nature of the polymeric HSC impedes the uniform spreading of the perovskite precursor solution, generating a terrible buried interface. Here, we dexterously tackle this dilemma from the perspective of dispersive and polar component surface energies of the HSC layer. A novel triarylamine-based HSC material, poly[bis(4-phenyl)(2,4-dimethoxyphenyl)amine] (2MeO-PTAA), was designed by introducing the polar methoxy groups to the para and ortho positions of the dangling benzene. These nonsymmetrically substituted electron-donating methoxy groups enhanced the polar components of surface energy, allowing more tight interfacial contact between the HSC layer and perovskite and facilitating hole extraction. When utilized as the dopant-free HSC layer in inverted PSCs, the 2MeO-PTAA-based device with CH₃NH₃PbI₃ as the absorber exhibited an encouraging power conversion efficiency of 20.23% and a high fill factor of 84.31% with negligible hysteresis. Finally, a revised detailed balance model was used to verify the drastically lessened surface defect-induced recombination loss and shunt resistance loss in 2MeO-PTAA-based devices. This work demonstrates a facile and efficient way to modulate the buried interface and shed light on the direction to further improve the photovoltaic performance of inverted PSCs with other types of perovskites.