High-Performance Polyimide-Based Water-Solid Triboelectric Nanogenerator for Hydropower Harvesting

Droplet-Based Triboelectric Nanogenerators with Needle Electrodes for Efficient Water Energy Harvesting

With the advent of droplet-based triboelectric nanogenerators (D-TENGs), methods for converting raindrop kinetic energy to electrical energy have developed rapidly. However, current D-TENG designs suffer from slow solid-liquid interface separation speeds and susceptibility to liquid residues. These issues compromise the output performance of D-TENGs and limit their applications in high-power electrical appliances. To address this, this study presents a needle electrode droplet-based triboelectric nanogenerator (NED-TENG). The needle electrode functions as the top electrode, optimizing solid-liquid contacts and efficiently harvesting raindrop kinetic energy by leveraging the triboelectric and electrostatic induction mechanisms. This needle electrode is made from one end of a copper wire, with its other end directly connected to the energy harvester. This setup positions all of the wiring on the back of the substrate, accelerating liquid separation, mitigating residue formation, and simplifying device fabrication. Upon assembly of the device, several factors influencing the performance of the fabricated D-TENG and its action mechanisms are explored to improve its output efficiency. Experimental results reveal that the designed D-TENG only requires 6 s to saturate the surface charge of its polytetrafluoroethylene film, achieving a short-circuit current (ISC) of up to 4.76 mA and an output voltage (V0) of up to 563 V. Overall, this study offers a straightforward and effective approach for harvesting kinetic energy from rainwater.

Charge Generation and Enhancement of Key Components of Triboelectric Nanogenerators: A Review

The past decade has witnessed remarkable progress in high-performance Triboelectric nanogenerators (TENG) with the design and synthesis of functional dielectric materials, the exploration of novel dynamic charge transport mechanisms, and the innovative design of architecture, making it one of the most crucial technologies for energy harvesting. High output charge density is fundamental for TENG to expand its application scope and accelerate industrialization; it depends on the dynamic equilibrium of charge generation, trapping, de-trapping, and migration within its core components. Here, this review classifies and summarizes innovative approaches to enhance the charge density of the charge generation, charge trapping, and charge collection layers. The milestone of high charge density TENG is reviewed based on material selection and innovative mechanisms. The state-of-the-art principles and techniques for generating high charge density and suppressing charge decay are discussed and highlighted in detail, and the distinct charge transport mechanisms, the technologies of advanced materials preparation, and the effective charge excitation strategy are emphatically introduced. Lastly, the bottleneck and future research priorities for boosting the output charge density are summarized. A summary of these cutting-edge developments intends to provide readers with a deep understanding of the future design of high-output TENG.

Self-Sustaining Triboelectric Nanosensors for Real-Time Urine Analysis in Smart Toilets

Healthcare has undergone a revolutionary shift with the advent of smart technologies, and smart toilets (STs) are among the innovative inventions offering non-invasive continuous health monitoring. The present technical challenges toward this development include limited sensitivity of integrated sensors, poor stability, slow response and the requirement external energy supply alongside manual sample collection. In this article, triboelectric nanosensor array (TENSA) is introduced featuring electrodes crafted from laser-induced 3D graphene with functional polymers like polystyrene, polyimide, and polycaprolactone for real-time urine analysis while generating 50 volts output via urine droplet-based triboelectrification. Though modulating interfacial double-layer capacitance, these sensors exhibit exceptional sensitivity and selectivity in detecting a broad spectrum of urinary biomarkers, including ions, glucose, and urea with a classification precision of 95% and concentration identification accuracy of up to 0.97 (R2), supported by artificial neural networks. Upon exposure to urine samples containing elevated levels of Na+, K+, and NH4 +, a notable decrease (ranging from 32% to 68%) is observed in output voltages. Conversely, urea induces an increase up to 13%. Experimental validation confirms the stability, robustness, reliability, and reproducibility of TENSA, representing a significant advancement in healthcare technology, offering the potential for improved disease management and prevention strategies.

Droplet Energy Harvesting System Based on Total-Current Nanogenerator

The droplet-based nanogenerator (DNG) is a highly promising technology for harvesting high-entropy water energy in the era of the Internet of Things. Yet, despite the exciting progress made in recent years, challenges have emerged unexpectedly for the AC-type DNG-based energy system as it transitions from laboratory demonstrations to real-world applications. In this work, we propose a high-performance DNG system based on the total-current nanogenerator concept to address these challenges. This system utilizes the water-charge-shuttle architecture for easy scale-up, employs the field effect to boost charge density of the triboelectric layer, adopts an on-solar-panel design to improve compatibility with solar energy, and is equipped with a novel DC-DC buck converter as power management circuit. These features allow the proposed system to overcome the existing bottlenecks of DNG and empower the system with superior performances compared with previous ones. Notably, with the core architecture measuring only 15 cm × 12.5 cm × 0.3 cm in physical dimensions, this system reaches a record-high open-circuit voltage of 4200 V, capable of illuminating 1440 LEDs, and can charge a 4.7 mF capacitor to 4.5 V in less than 24 min. In addition, the practical potential of the proposed DNG system is further demonstrated through a self-powered, smart greenhouse application scenario. These demonstrations include the continuous operation of a thermohygrometer, the operation of a Bluetooth plant monitor, and the all-weather energy harvesting capability. This work will provide valuable inspiration and guidance for the systematic design of next-generation DNG to unlock the sustainable potential of distributed water energy for real-world applications.

Eco-friendly triboelectric nanogenerator based on degradable rape straw powder for monitoring human movement

Green energy from the surrounding environment has great potential for reducing environmental pollution and sustainable development. Triboelectric nanogenerators (TENGs) are of great interest as they can easily harvest mechanical energy from the environment. Here, we present a triboelectric nanogenerator (RS-TENG) based on rape straw (RS), which was developed from a film composed of waste RS and polyvinyl alcohol (PVA). Due to the high content of carbonyl, hydroxyl and amino acid functional groups in RS, the ability of RS/PVA to lose electrons is increased. The proposed RS-TENG device with a size of 6.25 cm2exhibits open circuit voltage (78 V), short circuit current (5.3μA) performance under uniform external stress at a frequency of 3.5 Hz and 10 N in the cylinder motor. 104.5μW was obtained with a load resistance of 25 MΩ. Results obtained from degradability tests revealed that the RS/PVA film was able to degrade over a period of 30 d (In PBS solution). The RS-TENG produces a significantly high current signal under conditions of finger bending, elbow movements, and foot tapping. Practical tests of the RS-TENG have shown that it is a promising sensing device that will be widely used in the future.

Toward Large-Scale Energy Harvesting by a UV-Curable Organic-Coating-Based Triboelectric Nanogenerator

Triboelectric nanogenerators (TENGs) stand out as an attractive form of technology for the efficient harvest of mechanical energy and the powering of wearable devices due to their light weight, simplicity, high power density, and efficient vibration energy scavenging capabilities. However, the requirement for micro/nanostructures and/or complex and expensive instruments hinders their cheap mass production, thus limiting their practical applications. By using a simple, cost-effective, fast spray-coating process, we develop high-performance UV-curable triboelectric coatings for large-scale energy harvesting. The effect of different formulations and coating compositions on the triboelectric output is investigated to design triboelectric coatings with high output performance. The TENG based on a hybrid coating exhibits high output performance of 54.5 μA current, 1228.9 V voltage, 163.6 nC transferred charge and 3.51 mW output power. Moreover, the hybrid coatings show good long-term output stability. All the results indicate that the designed triboelectric coatings show great potential for large-scale energy harvesting with the advantages of cost-effectiveness, fast fabrication, easy mass production and long-term stability.

A Water-Driven and Low-Damping Triboelectric Nanogenerator Based on Agricultural Debris for Smart Agriculture

The rapid progress in distributed electronics in agriculture depends on a wide range of energy supplies, such as cables and batteries. However, cable installation and maintenance are inconvenient in the agricultural environment, and the massive use of batteries will cause high replacement costs and serious environmental issues. To mitigate these problems, a water flow-driven and high-performance triboelectric nanogenerator based on agricultural debris (including derelict plant fibers and recycled greenhouse film) (AD-TENG) is developed. The precisely designed air gap and plant fiber-based dielectric brushes enable minimized frictional resistance and sustainable triboelectric charges, resulting in low damping and high performance for the AD-TENG. After nano-morphology modifications of the dielectric layer, the maximum power density of the AD-TENG increases by 64 times and reaches ≈1.24 W m^-2 . The practical application demonstrates that the AD-TENG realizes the recycling of agricultural debris to achieve harvesting low-frequency and low-speed water-flow energy. Besides, the AD-TENG can be used to power agricultural sensors and develop the automatic irrigation system, which alleviates the energy consumption problem of agriculture and contributes to the realization of automated and informative intelligent agriculture.

The effect of metal surface nanomorphology on the output performance of a TENG

In this work, the effect of charge density and nanomorphology of a metal tip on the output performance of a triboelectric nanogenerator (TENG) is studied. The basic working principle of the TENG is charge transfer after separation of a metal and a polymer. There are different charge densities on different kinds of metal surface nanomorphology, which significantly influences the output performance of the TENG. Copper samples with different nanomorphology were obtained by controlling pH value, current density, electrolyte concentration, and temperature during the electrodeposition of copper. The samples were characterized using XRD and SEM. The output performance of the TENG is closely related to the size, charge density distribution, and shape of the metal nanoparticles.

A Stretchable and Self-Healing Hybrid Nano-Generator for Human Motion Monitoring

Transparent stretchable wearable hybrid nano-generators present great opportunities in motion sensing, motion monitoring, and human-computer interaction. Herein, we report a piezoelectric-triboelectric sport sensor (PTSS) which is composed of TENG, PENG, and a flexible transparent stretchable self-healing hydrogel electrode. The piezoelectric effect and the triboelectric effect are coupled by a contact separation mode. According to this effect, the PTSS shows a wide monitoring range. It can be used to monitor human multi-dimensional motions such as bend, twist, and rotate motions, including the screw pull motion of table tennis and the 301C skill of diving. In addition, the flexible transparent stretchable self-healing hydrogel is used as the electrode, which can meet most of the motion and sensing requirements and presents the characteristics of high flexibility, high transparency, high stretchability, and self-healing behavior. The whole sensing system can transmit signals through Bluetooth devices. The flexible, transparent, and stretchable wearable hybrid nanogenerator can be used as a wearable motion monitoring sensor, which provides a new strategy for the sports field, motion monitoring, and human-computer interaction.

Bioinspired Triboelectric Nanosensors for Self-Powered Wearable Applications

The sustainable operation of wearable sensors plays an important role in continuous and longtime health monitoring. Conventional batteries, which are bulky and rigid, do not satisfy these requirements and, rather, cause additional economic burdens and environmental problems by regular replacement of power sources. This article provides a review on an alternative solution in the form of self-powered devices that can harvest energy from the surrounding environment to support the operation of the wearable sensor. The Review starts with an introduction of the self-powered triboelectric nanosensors (TENSs) and its two independent modules: the energy harvester and the sensing module. The Review continues with the TENS-related bioinspired designs for wearable applications, while providing a bird's-eye view of their characteristics and applications. The ongoing challenges and prospects for providing personal healthcare with self-powered TENS are presented and discussed.

Fully Integrated Self-Powered Electrical Stimulation Cell Culture Dish for Noncontact High-Efficiency Plasmid Transfection

Plasmid DNA transfection of mammalian cells is widely used in biomedical research and genetic drug delivery, but low transfection efficiency, especially in the context of the primary cells, limits its application. To improve the efficiency of plasmid transfection, a fully integrated self-powered electrical stimulation cell culture dish (SESD) has been developed to provide self-powered electrical stimulation (ES) of adherent cells, significantly improving the efficiency of plasmid transfection into mammalian cells and cell survival by the standard lipofectamine transfection method. Mechanistically, ES can safely increase the intracellular calcium concentration by opening calcium-ion channels, leading to a higher efficiency of plasmid transfection. Therefore, SESD has the potential to become an effective platform for high-efficiency plasmid DNA transfection in biomedical research and drug delivery.