Fabrication of Nanohybrid Spinel@CuO Catalysts for Propane Oxidation: Modified Spinel and Enhanced Activity by Temperature-Dependent Acid Sites

MOF-derived high oxygen vacancies CuO/CeO2 catalysts for low-temperature CO preferential oxidation

The CO preferential oxidation reaction (CO-PROX) is an effective strategy to remove residual poisonous CO in proton exchange membrane fuel cells, in which oxygen vacancies play a critical role in CO adsorption and activation. Herein, a series of CuO/CeO2 catalysts derived from Ce-MOFs precursors were synthesized using different organic ligands via the hydrothermal method and the CO-PROX performance was investigated. The CuO/CeO2-135 catalyst derived from homophthalic tricarboxylic acid (1,3,5-H3BTC) exhibited superior catalytic performance with 100 % CO conversion at a relatively low temperature (T100% = 100 °C), with a wide reaction temperature range and excellent stability. The superior catalytic properties were attributed to the structural improvements provided by the 1,3,5-H3BTC precursors and the promotional effects of oxygen vacancies. Additionally, in-situ Raman spectroscopy was performed to verify the dynamic roles of oxygen vacancies for CO adsorption and activation, while in-situ DRIFTS analysis revealed key intermediates in the CO-PROX reaction, shedding light on the mechanistic aspects of the catalytic process. This work not only demonstrates insights into the effective CuO/CeO2 catalysts for CO preferential oxidation, but also provides a feasible way to synthesize MOF-derived catalysts.

Insights into effects of grain boundary engineering in composite metal oxide catalysts for improving catalytic performance

Volatile Organic Compounds (VOCs) have long been a threat to human health. However, designing economical and efficient transition metal composite oxide catalysts for VOCs purification remains a challenge. Herein, this study demonstrates the enormous potential of grain boundary engineering in facilitating VOCs decomposition over ordered mesoporous composite oxide denoted as 3D-MnxCoy (x, y = 1, 3, 5, 7, 9). Specifically, the three-dimensional (3D) Mn7Co1 catalyst shows 100% ethyl acetate removal efficiency for a continuous airflow containing 1000 ppm ethyl acetate over 60000 h-1 space velocity at 160 °C. Mechanism study suggests that the high catalytic performance originates from the lattice distortion caused by the introduction of heteroatoms, along with the size effect of nanopore walls, which leads to the formation of various grain boundaries on the catalyst surface. The presence of grain boundaries facilitates the generation of oxygen vacancies, thus promoting the migration and activation of oxygen species. Furthermore, the near-atmospheric pressure X-ray photoelectron spectroscopy (NAP- XPS) monitoring results reveal that the bimetallic synergy enhanced by grain boundary accelerates the catalytic reaction rate of VOCs through Mn3++Co3+↔Mn4++Co2+ redox cycle. This study may shed light on the great potential of ordered mesoporous bimetallic oxide catalysts in VOCs pollution control.

What is the role of interface in the catalytic elimination of multi-carbon air pollutants?

Multi-carbon air pollutants pose serious hazards to the environment and health, especially soot and volatile organic compounds (VOCs). Catalytic oxidation is one of the most effective technologies for eliminating them. The oxidation of soot and most hydrocarbon VOCs begins with C-H (or edge-CH) activation, so this commonality can be targeted to design active sites. Rationally designed interface nanostructures optimize metal-support interactions (MSIs), providing suitable active sites for C-H activation. Meanwhile, the interfacial reactant spillover facilitates the further decomposition of activated intermediates. Thus, rationally exploiting interfacial effects is critical to enhancing catalytic activity. In this review, we analyzed recent advances in the following aspects: I. Understanding of the interface effects and design; II. Optimization of the catalyst-reactant contact, metal-support interface, and MSIs; III. Design of the interfacial composition and perimeter. Based on the analysis of the advances and current status, we provided challenges and opportunities for the rational design of interface nanostructures and interface-related stability. Meanwhile, a critical outlook was given on the interfacial sites of single-atom catalysts (SACs) for specific activation and catalytic selectivity.

Photothermal CO-PROX reaction over ternary CuCoMnOx spinel oxide catalysts: the effect of the copper dopant and thermal treatment

The purification of carbon monoxide in H₂-rich streams is an urgent problem for the practical application of fuel cells, and requires the development of efficient and economical catalysts for the preferential oxidation of CO (CO-PROX). In the present work, a facile solid phase synthesis method followed by an impregnation method were adopted to prepare a ternary CuCoMnO_x spinel oxide, which shows superior catalytic performance with CO conversion of 90% for photothermal CO-PROX at 250 mW cm^-2. The dopant of copper species leads to the incorporation of Cu ions into the CoMnO_x spinel lattice forming a ternary CuCoMnO_x spinel oxide. The appropriate calcination temperature (300 °C) contributes to the generation of abundant oxygen vacancies and strong synergetic Cu-Co-Mn interactions, which are conducive to the mobility of oxygen species to participate in CO oxidation reactions. On the other hand, the highest photocurrent response of CuCoMnO_x-300 also promotes the photo-oxidation activity of CO due to the high carrier concentration and efficient carrier separation. In addition, the in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) confirmed that doping copper species could enhance the CO adsorption capacity of the catalyst due to the generation of Cu⁺ species, which significantly increased the CO oxidation activity of the CuCoMnO_x spinel oxide. The present work provides a promising and eco-friendly solution to remove the trace CO in H₂-rich gas over CuCoMnO_x ternary spinel oxide with solar light as the only energy source.

Oxygen vacancy induced MnO2 catalysts for efficient toluene catalytic oxidation

The α-MnO2, with abundant oxygen vacancies, facilitates the adsorption and activation of O2 to produce active adsorbed oxygen species and weakens lattice oxygens species. These oxygen species can significantly improve toluene catalytic oxidation.

Key intermediates from simultaneous removal of NOx and chlorobenzene over a V2O5–WO3/TiO2 catalyst: a combined experimental and DFT study

Chlorobenzene suppresses the active cis-N2O22− formation and the dissociated Cl− combines with vanadium to form vanadium chloride which enhanced surface Brønsted acidity.