Engineering Manganese Defects in Mn3O4 for Catalytic Oxidation of Carcinogenic Formaldehyde

Insight into the effect of exposed crystal facets of anatase TiO2 on HCHO catalytic oxidation of Mn-Ce/TiO2

Indoor formaldehyde pollution seriously jeopardizes human health. The development of efficient and stable non-precious metal catalysts for low-temperature catalytic degradation of formaldehyde is a promising approach. In this study, TiO2 {001} and {101} supports were loaded with different ratios of Mn and Ce active components, and the effects of the ratios of the active components on the catalytic activity were investigated. The elemental oxidation states, redox capacities, active oxygen mobilities and acid site distributions of the catalysts were determined using characterization techniques such as XPS, H2-TPR, O2-TPD, and NH3-TPD. In situ infrared spectroscopy was utilized to reveal the differences in the two-step dehydrogenation reactions of dioxymethylene (DOM) in 5Mn1Ce/Ti-NS and 5Mn1Ce/Ti-NP. Density-functional theory was used to investigate the differences in the catalytic steps and maximum energy barriers of Mn-Ce/Ti-NS and Mn-Ce/Ti-NP for HCHO. The differences in catalytic activity due to the influence of the manganese and cerium active components on the {001} and {101} crystal faces of anatase titanium dioxide are comprehensively revealed. Exposure of the supported crystalline surfaces alters the catalytic activity centers and reaction pathways at the molecular level. This study provides experimental and theoretical guidance for the selection of exposed crystalline surfaces for loaded catalysts.

Formaldehyde Ambient-Temperature Decomposition over Pd/Mn3O4-MnO Driven by Active Sites' Self-Tandem Catalysis

The widespread presence of formaldehyde (HCHO) pollutant has aroused significant environmental and health concerns. The catalytic oxidation of HCHO into CO2 and H2O at ambient temperature is regarded as one of the most efficacious and environmentally friendly approaches; to achieve this, however, accelerating the intermediate formate species formation and decomposition remains an ongoing obstacle. Herein, a unique tandem catalytic system with outstanding performance in low-temperature HCHO oxidation is proposed on well-structured Pd/Mn3O4-MnO catalysts possessing bifunctional catalytic centers. Notably, the optimized tandem catalyst achieves complete oxidation of 100 ppm of HCHO at just 18 °C, much better than the Pd/Mn3O4 (30%) and Pd/MnO (27%) counterparts as well as other physical tandem catalysts. The operando analyses and physical tandem investigations reveal that HCHO is primarily activated to gaseous HCOOH on the surface of Pd/Mn3O4 and subsequently converted to H2CO3 on the Pd/MnO component for deep decomposition. Theoretical studies disclose that Pd/Mn3O4 exhibits a favorable reaction energy barrier for the HCHO → HCOOH step compared to Pd/MnO; while conversely, the HCOOH → H2CO3 step is more facilely accomplished over Pd/MnO. Furthermore, the nanoscale intimacy between two components enhances the mobility of lattice oxygen, thereby facilitating interfacial reconstruction and promoting interaction between active sites of Pd/Mn3O4 and Pd/MnO in local vicinity, which further benefits sustained HCHO tandem catalytic oxidation. The tandem catalysis demonstrated in this work provides a generalizable platform for the future design of well-defined functional catalysts for oxidation reactions.

Fabrication of highly dispersed Pd-Mn3O4 catalyst for efficient catalytic propane total oxidation

Adjusting the interaction between dual active components for enhancing volatile organic compounds (VOCs) degradation is an effective but still challenging means of air pollution control. Herein, a limited pyrolysis oxidation strategy was adopted to prepare Pd-Mn3O4 spinel catalysts with uniform morphology and active component dispersion. Among these, 1.08Pd-Mn3O4 presented the highest catalytic efficiency with a T90 value of 240 °C, which was 94 °C lower than that of Mn3O4. Characterization and density functional theory (DFT) calculation results revealed that the strong metal-support interaction (SMSI) effect between Pd and Mn3O4 promoted the redistribution of surface charges, thus strengthening the oxidation-reduction ability of the active sites. Moreover, the SMSI effect led to a better migration of surface oxygen species, and boosted the generation of active surface oxygen species. Simultaneously, the Pd catalyst further reduced the energy barrier in the initial stage of the dehydrogenation of propane. Overall, this study provided a novel design strategy for dual active components catalysts with SMSI effect and extended the application of these catalysts in the important field of VOCs elimination.

(Electro)catalytic oxidation of sulfide and recovery of elemental sulfur from sulfide-laden streams

MnxOy coated over TiO2 nanotube array substrate was doped with Mo and polyaniline (PANI) and applied for electrochemical desulfurization of concentrated sulfide (HS-) solutions at basic pH, typical of biogas scrubbing solutions and industrial wastewater. Mo and PANI co-dopants significantly enhanced the anode activity towards sulfide oxidation and ensured its complete stability even in highly corrosive sulfide solutions (e.g., 200 mM HS-). This was due to the increased electrochemically active surface area, improved coating conductivity and reduced charge transfer resistance. The (electro)catalytic oxidation of HS- demonstrated robust performance with very limited impact of different operational parameters (e.g., dissolved oxygen, anode potential, HS- concentration). Due to the formation of elemental sulfur (S0) layer at the anode surface at basic pH, longer term anode usage requires its periodic removal. Chemical dissolution of S0 with toluene allows its rapid removal without affecting the anode activity, and easy recrystallization and recovery of pure sulfur.

Oxidation mechanism of HCHO on copper-manganese composite oxides catalyst

Formaldehyde (HCHO) is a typical air pollutant that severely endangers human health. The Cu-Mn spinel-structure catalyst exhibits good catalytic oxidation activity for HCHO removal. Theoretical calculation study of density functional theory (DFT) was performed to provide an atomic-scale understanding for the oxidation mechanism of HCHO over CuMn2O4 surface. The results indicate that the (110) surface containing alternating three-coordinated Cu atom and three-coordinated Mn atom is more active for HCHO and O2 adsorption than the (100) surface. The Mars-van-Krevelen mechanism is dominant for HCHO catalytic oxidation. This reaction pathway of MvK mechanism includes HCHO adsorption and dehydrogenation dissociation, CO2 formation and desorption, O2 adsorption, H2O formation and surface restoration. In the complete catalytic cycle of HCHO oxidation, the second dehydrogenation (CHO* → CO* + H*) shows the highest energy barrier and is recognized as the rate-limiting step. The relationship of temperature and reaction rate constant is found to be positive by the kinetic analysis. The minimum activation energy of the MvK mechanism via the direct dehydrogenation pathway is 1.29 eV. This theoretical work provides an insight into the catalytic mechanism of HCHO oxidation over CuMn2O4 spinel.

Thermocatalytic Degradation of Gaseous Formaldehyde Using Transition Metal-Based Catalysts

Formaldehyde (HCHO: FA) is one of the most abundant but hazardous gaseous pollutants. Transition metal oxide (TMO)-based thermocatalysts have gained much attention in its removal due to their excellent thermal stability and cost-effectiveness. Herein, a comprehensive review is offered to highlight the current progress in TMO-based thermocatalysts (e.g., manganese, cerium, cobalt, and their composites) in association with the strategies established for catalytic removal of FA. Efforts are hence made to describe the interactive role of key factors (e.g., exposed crystal facets, alkali metal/nitrogen modification, type of precursors, and alkali/acid treatment) governing the catalytic activity of TMO-based thermocatalysts against FA. Their performance has been evaluated further between two distinctive operation conditions (i.e., low versus high temperature) based on computational metrics such as reaction rate. Accordingly, the superiority of TMO-based composite catalysts over mono- and bi-metallic TMO catalysts is evident to reflect the abundant surface oxygen vacancies and enhanced FA adsorptivity of the former group. Finally, the present challenges and future prospects for TMO-based catalysts are discussed with respect to the catalytic oxidation of FA. This review is expected to offer valuable information to design and build high performance catalysts for the efficient degradation of volatile organic compounds.

Efficient photocatalytic remediation of typical antibiotics in water via Mn3O4 decorated carbon nitride nanotube

Antibiotic abuse will seriously affect the ecology and environment. Photocatalytic oxidation technology based on carbon nitride (g-C₃N₄) has been widely adopted to treat wastewater containing antibiotics. Here, a novel composite photocatalyst MCNT was prepared by loading manganese oxide (Mn₃O₄) on the surface of g-C₃N₄ nanotubes (CNT). Three typical antibiotics, trimethoprim (TMP), norfloxacin (NOR), and tetracycline (TC) were used as model contaminants to evaluate the oxidative properties of prepared materials. Compared with bulk g-C₃N₄, the degradation rates of TMP, NOR, and TC catalyzed by MCNT-5 were increased by 2, 3, and 1.4 times, respectively, mainly due to 1) the larger specific surface area of the nanotube structure of CNT, which provides abundant active sites for antibiotic adsorption and catalytic oxidation, and 2) the loading of Mn₃O₄, which promotes the directional migration of photogenerated charges and improves the separation efficiency of photogenerated electrons and holes. The free radical capture and quenching experiments confirmed that MCNT degraded the target organic pollutants with hydroxyl radical (·OH) and singlet oxygen (¹O₂) as the main active oxidants. This catalyst maintained 80% photocatalytic oxidation performance after five cyclic experiments. This study provides new insights into developing efficient, stable, and environmentally-friendly photocatalysts and provides a new dimension to mitigate the antibiotic pollution problem.

Green synthesis of Mn3O4 nanoparticles using Costus woodsonii flowers extract for effective removal of malachite green dye

The pollution of organic dyes such as malachite green is one of the globally critical issues, calling for efficient mitigation methods. Herein, we developed green Mn₃O₄ nanoparticles synthesized using natural compounds extracted from Costus woodsonii flowers under an ultrasound-assisted mode. The materials were characterized using several physicochemical techniques such as Fourier-transform infrared spectroscopy, X-ray diffraction, Energy-dispersive X-ray spectroscopy, scanning electron microscopy, Raman spectroscopy, and N₂ adsorption desorption isotherm measurement. The X-ray diffraction and N₂ isotherm plots confirmed the presence of tetragonal γ-Mn₃O₄ phase and mesoporous structure, respectively. Carbonyl groups derived from flavonoids or carboxylic compounds were found in the surface of green Mn₃O₄ nanoparticles. The effect of pH, contact time, dose, and concentration on the adsorption of malachite green over green Mn₃O₄ was carried out. The maximum malachite green adsorption capacity for green Mn₃O₄ nanoparticles was 101-162 mg g^-1. Moreover, kinetic and isotherm adsorption of malachite green obeyed Langmuir (R_adj.² = 0.980-0.995) and pseudo first-order models (R_adj.² = 0.996-1.00), respectively. Adsorption of malachite green over green Mn₃O₄ was a thermodynamically spontaneous process due to negative Gibbs free energy values (ΔG^ο < 0). Green Mn₃O₄ nanoparticles offered a high stability through the FR-IR spectra analysis. With a good recyclability of 4 cycles, green Mn₃O₄ nanoparticles can be used as potential adsorbent for removing malachite green dye from water.

Novel B and N Sites of One-Dimensional Boron Nitride Fiber: Efficient Performance and Mechanism in the Formaldehyde Capture Process

Identification of adsorption centers with atomic levels of adsorbents is crucial to study the adsorption of formaldehyde (HCHO), especially for an in-depth understanding of the mechanism of HCHO capture. Herein, we investigate the HCHO adsorption performance of one-dimensional (1D) nanoporous boron nitride (BN) fiber, and explore the adsorption mechanism by density functional theory (DFT) calculations, including adsorption energy change and Bader charge change, and experimental study as well. Research shows that the 1D nanoporous BN fiber possesses a high concentration of Lewis pairs, which act as Lewis acid and Lewis base sites associated with the fiber's electron-deficient and electron-rich features. It is worth noting that the HCHO removal efficiency of a typical sample is as high as 91%. This work may open the door to the field of adsorption of other pollutants by constructing Lewis pairs in the future.

Thermal treatment for promoting interfacial interaction in Co-BDC/Ti3C2Tx hybrid nanosheets for hybrid supercapacitors

The design and synthesis of high-performance metal-organic frameworks (MOFs)-based electrodes are important for hybrid supercapacitors (HSC). Herein, enhanced interfacial interaction in Co-BDC/Ti₃C₂T_x (denoted as CoTC) hybrid nanosheets is achieved through thermal treatment, giving remarkably improved capacity performance compared with CoTC. The low temperature annealing treatment enables modulation of the bridging bonds content of CoTC and thus regulates the interfacial coupling effect between Co-BDC and Ti₃C₂T_x. Moreover, both the detailed XPS and XANES analysis reveal that the strong interfacial interactions between the two components promote a partial electron transfer from Ti₃C₂T_x to Co-BDC through the Ti-O-Co interfacial bonds. Consequently, it endows the Co-BDC with enhanced conductivity as well as the higher valence of Ti species in Ti₃C₂T_x, hence contributes a remarkable enhanced specific capacity. This work will provide a pathway to design advanced MOF/MXene materials for HSC.

A simple method to regulate surface hydroxy groups on Al2O3 for improving catalytic oxidation performance for HCHO on Pt/Al2O3

For supported noble metal catalysts, the properties of the support had great influence on the state of noble metals. Herein, we chose Al2O3 as model to find a simple method...

Engineering of Mn3O4@Ag microspheres assembled from nanosheets for superior O3 decomposition

A topochemical transformation route was designed for synthesis of Mn3O4 nanospheres using β-MnOOH as the precursor. Ag nanoparticles were doped via an in situ redox reaction to obtain Mn3O4@Ag-NF, which displayed an enhanced performance for O3 elimination.