Chemically Robust and Bifunctional Co(II)-Framework for Trace Detection of Assorted Organo-toxins and Highly Cooperative Deacetalization-Knoevenagel Condensation with Pore-Fitting-Induced Size-Selectivity

Defect-engineered indium-organic framework displays the higher CO2 adsorption and more excellent catalytic performance on the cycloaddition of CO2 with epoxides under mild conditions

In order to achieve the high adsorption and catalytic performance of CO2, the direct self-assembly of robust defect-engineered MOFs is a scarcely reported and challenging proposition. Herein, a highly robust nanoporous indium(III)-organic framework of {[In2(CPPDA)(H2O)3](NO3)·2DMF·3H2O}n (NUC-107) consisting of two kinds of inorganic units of chain-shaped [In(COO)2(H2O)]n and watery binuclear [In2(COO)4(H2O)8] was generated by regulating the growth environment. It is worth mentioning that [In2(COO)4(H2O)8] is very rare in terms of its richer associated water molecules, implying that defect-enriched metal ions in the activated host framework can serve as strong Lewis acid. Compared to reported skeleton of [In4(CPPDA)2(μ3-OH)2(DMF)(H2O)2]n (NUC-66) with tetranuclear clusters of [In4(μ3-OH)2(COO)10(DMF)(H2O)2] as nodes, the void volume of NUC-107 (50.7%) is slightly lower than the one of NUC-66 (52.8%). However, each In3+ ion in NUC-107 has an average of 1.5 coordinated small molecules (H2O), which far exceeds the average of 0.75 in NUC-66 (H2O and DMF). After thermal activation, NUC-107a characterizes the merits of unsaturated In3+ sites, free pyridine moieties, solvent-free nanochannels (10.2 × 15.7 Å2). Adsorption tests prove that the host framework of NUC-107a has a higher CO2 adsorption (113.2 cm3/g at 273 K and 64.8 cm3/g at 298 K) than NUC-66 (91.2 cm3/g at 273 K and 53.0 cm3/g at 298 K). Catalytic experiments confirmed that activated NUC-107a with the aid of n-Bu4NBr was capable of efficiently catalyzing the cycloaddition of CO2 with epoxides into corresponding cyclic carbonates under the mild conditions. Under the similar conditions of 0.10 mol% MOFs, 0.5 mol% n-Bu4NBr, 0.5 MP CO2, 60 °C and 3 h, compared with NUC-66a, the conversion of SO to SC catalyzed by NUC-107a increased by 21%. Hence, this work offers a valuable perspective that the in situ creation of robust defect-engineered MOFs can be realized by regulating the growth environment.

Robust Fluorine-Decorated {Yb4}-Organic Framework for C2H6 Capture and Efficient Catalytic Performance on CO2-Epoxide Cycloaddition

Fluorine-functionalized MOFs have excellent unusual properties such as gas adsorption and separation and catalysis, but the functionalization of existing ligands and the self-assembly of functionalized MOFs remain a challenge. Herein, we report a robust fluorine-functionalized nanochannel-based ytterbium(III)-organic framework of {(Me2NH2)[Yb4(CFPDA)2(μ2-HCO2)(μ3-OH)2(H2O)2]·4DMF·5H2O}n (NUC-122, H5CFPDA = 4,4'-(4-(4-carboxy-2-fluorophenyl)pyridine-2,6-diyl)diisophthalic acid) with [Yb4(μ3-OH)2(μ2-HCO2)(H2O)2] clusters as secondary building units (SBUs). Compared to reported anionic skeleton of [Yb4(BDCP)2(μ2-HCO2)(μ3-OH)2(H2O)2]n (NUC-38Yb), the void volume of NUC-122 (54.1%) is slightly lower than that of NUC-38Yb (56.7%), which is caused by functionalized fluorine atoms on the ligand of H5BDCP. Because of the introduction of fluorine groups, activated NUC-122a displays a higher adsorption capacity for CO2 along with the value of 117.5 cm3/g (273 K) and 63.1 cm3/g (298 K). Further, activated NUC-122a has a high ethane (C2H6) separation performance over the mixture of C2H6/C2H4 with the selectivity of 1.6, enabling the purity of recycled C2H4 to reach 99.99%. Moreover, the CO2-epoxide cycloaddition could be efficiently catalyzed by NUC-122a under comparatively mild conditions. Under optimal catalytic conditions of 0.13 mol % MOFs, 1.69 mol % n-Bu4NBr, 0.7 MPa CO2, 70 °C, and 3 h, the conversion yield of SO to SC catalyzed by NUC-122a is 26% higher than that catalyzed by NUC-38Yb. The excellent separation and catalytic performance should be attributed to the combined diverse functional groups such as Lewis acidic sites of Yb3+, Lewis basic sites of -F and Npyridine atoms, and electrophilic H-bond donors (HBD) of μ3-OH and μ2-HCO2 moieties. Hence, this work not only reports a fluorine-functionalized multifunctional material but also provides an in-depth insight into the synthetic strategy of functionalized metal-organic host frameworks.

Heterobimetallic Synergism in Triple-Redox 2D Framework for Largely Boosted Water Oxidation and Flanked Carboxylic-Acid-Triggered Unconventional Tandem Catalysis

A fish-bone-shaped and thermochemically stable 2D metal-organic framework (MOF) with multimodal active center-decked pore-wall is devised. Redox-active [Co2(COO)4] node and thiazolo[5,4-d]thiazole functionalization benefit this mixed-ligand MOF exhibiting electrochemical water oxidation with 375 mV overpotential at 10 mA cm-2 current density and 78 mV per dec Tafel slope in alkaline medium. Pair of oppositely oriented carboxylic acids aids postmetalation with transition metal ions to engineer heterobimetallic materials. Notably, overpotential of Ni2+ grafted triple-redox composite reduces to 270 mV with twofold declined Tafel slope than the parent MOF, ranking among the best-reported values, and outperforming majority of related catalysts. Significantly, turnover frequency and charge transfer resistance display 35.5 and 1.4-fold upsurge, respectively, with much uplifted chronopotentiometric stability and increase active surface area owing to synergistic Co(II)-Ni(II) coupling. The simultaneous presence of ─COOH and nitrogen-rich moieties renders this hydrogen-bonded MOF as acid-base synergistic catalyst for recyclable deacetalization-Knoevenagel reaction with >99% product yield under solvent-free mild condition. Besides control experiments, unique role of ─COOH as hydrogen-bond donor site in substrate activation is validated from comparing the performances of molecular-shearing approach-derived structurally similar unfunctionalized MOF, and the heterobimetallic composite. To the best of tandem Knoevenagel condensation, larger-sized acetal exhibits poor yield of α,β-unsaturated dicyanides, and demonstrates pore-fitting-mediated size-selectivity.

Multiple Stimulus Response Material Based on Sr-tcbpe MOF for Mechanochromism, Visualization Labeling, and Etching Toward TNP

The abuse and excessive discharge of organic pollutants such as nitroaromatic compounds (NACs) have become a hot topic of concern for all humanity and society, and the development of fast, effective, and targeted technical means for detecting NACs also faces many challenges. Here, we reported a strontium-based metal-organic framework (MOF) {[Sr2(tcbpe)(H2O)4]}n (Sr-tcbpe), in which tcbpe represents deprotonated 4',4‴,4″‴,4‴‴-(ethene-1,1,2,2-tetrayl)tetrakis(([1,1'biphenyl]-4-carboxylic acid)). In Sr-tcbpe, Sr-O polyhedron and deprotonated tcbpe4- ligand have a staggered connection to form a self-assembled three-dimensional network structure. In addition, it is found that Sr-tcbpe undergoes no luminescent color change when grinding under solvent protection, while mechanochromic fluorescence behavior is observed when grinding directly, leading to luminescent color changes from cyan to green (Sr-tcbpe-G). Additionally, Sr-tcbpe and Sr-tcbpe-G could selectively detect PNP, DNP, and TNP, and Sr-tcbpe achieves visual fluorescence sensing detection toward TNP at a limit of detection as low as 2.25 μM. Moreover, during the detection process, unexpectedly, TNP exhibits a selective etching effect on Sr-tcbpe, which could drill nano holes with different sizes on the surface area of MOF materials to a certain extent, achieving the conversion of chemical energy to mechanical energy. In addition, the successful preparation of a portable sensor Sr-tcbpe@gypsum block provides a platform for the perfect combination of mechanochromic fluorescence behavior and visualization detection toward TNP. It lays the foundation for the practical application of MOF materials in daily life.

Nitrogen-Rich Covalent Organic Polymer for Metal-Free Tandem Catalysis and Postmetalation-Actuated High-Performance Water Oxidation

Development of high-performing catalytic materials for selective and mild chemical transformations through adhering to the principles of sustainability remains a central focus in modern chemistry. Herein, we report the template-free assembly of a thermochemically robust covalent organic polymer (COP: 1) from 2,2'-bipyridine-5,5'-dicarbonyl dichloride and 2,4,6-tris(4-aminophenyl)triazine as [2 + 3] structural motifs. The two-dimensional (2D) layered architecture contains carboxamide functionality, delocalized π-cloud, and free pyridyl-N site-decked pores. Such trifunctionalization benefits this polymeric network exhibiting tandem alcohol oxidation-Knoevenagel condensation. In contrast to common metal-based catalysts, 1 represents a one of a kind metal-free alcohol oxidation reaction via extended π-cloud delocalization-mediated free radical pathway, as comprehensively supported from diverse control experiments. In addition to reasonable recyclability and broad substrate scope, the mild reaction condition underscores its applicability in benign synthesis of valuable product benzylidene malononitrile. Integration of 2,2'-bipyridyl units in this 2D COP favors anchoring non-noble metal ions to devise 1-M (M: Ni2+/ Co2+) that demonstrate outstanding electrochemical oxygen evolution reaction in alkaline media with high chronoamperometric stability. Electrochemical parameters of both 1-Co and 1-Ni outperform some benchmark, commercial, as well as a majority of contemporary OER catalysts. Specifically, the overpotential and Tafel slope (280 mV, 58 mV/dec) for 1-Ni is better than 1-Co (360 mV, 78 mV/dec) because of increased charge accumulation as well as a higher number of active sites compared to the former. In addition, the turnover frequency of 1-Ni is found to be 6 times higher than that of 1-Co and ranks among top-tier water oxidation catalysts. The results provide valuable insights in the field of metal-free tandem catalysis as well as promising electrochemical water splitting at the interface of task-specific functionality fuelling in polymeric organic networks.

Bifunctional Metal-Organic Nanoballs Featuring Lewis Acidic and Basic Sites as a New Platform for One-Pot Tandem Catalysis

The design and synthesis of polyhedra using coordination-driven self-assembly has been an intriguing research area for synthetic chemists. Metal-organic polyhedra are a class of intricate molecular architectures that have garnered significant attention in the literature due to their diverse structures and potential applications. Hereby, we report Cu-MOP, a bifunctional metal-organic cuboctahedra built using 2,6-dimethylpyridine-3,5-dicarboxylic acid and copper acetate at room temperature. The presence of both Lewis basic pyridine groups and Lewis acidic copper sites imparts catalytic activity to Cu-MOP for the tandem one-pot deacetalization-Knoevenagel/Henry reactions. The effect of solvent system and time duration on the yields of the reactions was studied, and the results illustrate the promising potential of these metal-organic cuboctahedra, also known as nanoballs for applications in catalysis.

Highly selective detection of 2,4-dinitrophenol by fluorescent NH2-MIL-125(Ti) via dual-parameter sensing technology

The organic contaminant 2,4-dinitrophenol (2,4-DNP) is widely prevalent and poses significant risks to human health. Although numerous in-depth studies having been reported on the highly sensitive detection of 2,4-DNP, there are still challenges to its selective detection. Here, the fluorescence intensity ratio (I0/I) and emission peak shift (Δλ) were utilized for selective detection of 2,4-DNP by NH2-MIL-125(Ti). Notably, the emission peak of the NH2-MIL-125(Ti) suspension exhibited a remarkable red shift in the presence of 2,4-DNP (Δλ = 26 nm), accompanied by the blue shift or weak red shift of analogs, which provided a solid basis for selective detection of 2,4-DNP. Meanwhile, the I0/I ratio of the NH2-MIL-125(Ti) suspension exhibited a robust linear correlation with 2,4-DNP at the low concentration range (0-70 μM). The interaction of the analyte with NH2-MIL-125(Ti) was revealed to involve intermolecular charge transfer (ICT) and fluorescence resonance energy transfer (FRET) through XPS, FTIR, and UV-vis absorption spectroscopy. Additionally, we achieved the detection of 2,4-DNP using a smartphone by recognizing both the blue (B) values and the luminance (L) values. The obtained results demonstrated that the NH2-MIL-125(Ti) probe based on dual-parameter sensing technology exhibited excellent potential for selectively detecting 2,4-DNP in water environments, thereby offering significant prospects for its application in water quality assessment.

Site-Memory-Triggered Reversible Acronym Encryption in a Nitrogen-Rich Pore-Partitioned MOF for Ultrasensitive Monitoring of Roxarsone and Dichloran over Multiple Platform

Stimuli-responsive emission color modulation in fluorescent metal-organic frameworks (MOFs) promises luminescence-ink-based security application, while task-specific functionality-engineered pores can aid fast-responsive, discriminative, and ultralow detection of harmful organo-aromatics in the aqueous phase. Considering practical applicability, a self-calibrated fluoro-switch between encrypted and decrypted states is best suited for antiforgery measures, whereas image-based monitoring of organo-toxins by repetitive and handy methods over multiple platforms endorses in-field sensory potential. Herein, we constructed a mixed-ligand based chemically stable and bilayered-pillar MOF from -NH2-hooked pyridyl linker and tricarboxylate ligand that embraces negatively charged [Cd3(μ2-OH)(COO)6] node and shows pore-space-partitioning by nitrogen-rich flanked organic struts. Owing to the presence of a self-calibrating triazolylamine moiety-grafted auxiliary linker, this anionic MOF delineates reversible and multicyclic fluoro-swapping between protonated-encrypted and deprotonated-decrypted domains in the alternative presence of acid and base. Such pH-triggered, site-specific luminescence variation is utilized to construct highly regenerative anticounterfeiting labels for vivid acronym encryption. The intense fluorescence signature of the material is further harnessed in extremely selective and quick responsive sensing of harmful feed additive roxarsone (ROX) and dichloran (DCNA) pesticide in highly recyclable fashion with significant quenching and nanomolar limits of detection (ROX: 52 ppb; DCNA: 26.8 ppb). Notably, the ultrasensitive fluoro-detection of both these organo-toxins is successfully demonstrated via a handy paper-strip method as well as on the vegetable surface for real-time monitoring. Comprehensive density functional theory studies validate the electron transfer mechanism through redistribution of molecular orbital energy levels by each of the targeted analytes in this electron-rich framework besides evidencing MOF-analyte supramolecular interactions.

A Halogen-Bonded Organic Framework (XOF) Emissive Cocrystal for Acid Vapor and Explosive Sensing, and Iodine Capture

There is a strong and urgent need for efficient materials that can capture radioactive iodine atoms from nuclear waste. This work presents a novel strategy to develop porous materials for iodine capture by employing halogen bonding, mechanochemistry and crystal engineering. 3D halogen-bonded organic frameworks (XOFs) with guest-accessible permanent pores are exciting targets in crystal engineering for developing functional materials, and this work reports the first example of such a structure. The new-found XOF, namely TIEPE-DABCO, exhibits enhanced emission in the solid state and turn-off emission sensing of acid vapors and explosives like picric acid in nanomolar quantity. TIEPE-DABCO captures iodine from the gas phase (3.23 g g-1 at 75 °C and 1.40 g g-1 at rt), organic solvents (2.1 g g-1 ), and aqueous solutions (1.8 g g-1 in the pH range of 3-8); the latter with fast kinetics. The captured iodine can be retained for more than 7 days without any leaching, but readily released using methanol, when required. TIEPE-DABCO can be recycled for iodine capture several times without any loss of storage capacity. The results presented in this work demonstrate the potential of mechanochemical cocrystal engineering with halogen bonding as an approach to develop porous materials for iodine capture and sensing.

Coordination Unsaturation and Basic Site-Immobilized Nanochannel in a Chemorobust MOF for 3-Fold-Increased High-Temperature Selectivity and Fixation of CO2 under Mild Conditions with Nanomolar Recognition of Roxarsone

A multifaceted metal-organic framework (MOF) with task-specific site-engineered pores can promise high-temperature and moisture-tolerant capture and non-redox fixation of CO2 under mild conditions as well as ultrasensitive detection of carcinogenic contaminants in water. Herein, we report a pillar-bilayered MOF that holds a nanochannel with contrasting functionalities for both these sustainable applications with improved performance characteristics. The twofold entangled robust framework exhibits CO2 adsorption at elevated temperatures with considerable MOF-gas interaction. Interestingly, CO2 selectivity unveils nearly a 3-fold improvement upon the rise of temperature, affording a CO2/N2 value of 820 at 313 K, which outperforms many porous adsorbents. Additionally, breakthrough simulation establishes complete separation and attests the potential of this MOF in the separation of flue gas mixture. Importantly, minor CO2 loss during multiple capture-release cycles and under a relative humidity of 75% promise practical usability of the material. Density functional theory (DFT) not only portrays the atomistic level snapshots of temperature-triggered CO2 inclusion inside this microporous vessel alongside the role of diverse CO2-philic sites but also validates the basis of N2-phobicity of an azo-functionalized linker on such increased selectivity. The guest-free MOF further demonstrates non-redox and recyclable CO2 fixation with wide epoxide tolerance under solvent-free mild conditions and even works at atmospheric pressure and room temperature. The crucial roles of high-density acid-base sites in both adsorption and catalysis are supported by control experiments and by comparing the activity of an unfunctionalized MOF. The hydrolytic stability and strong luminescence signature benefit the framework in aqueous-phase selective and fast responsive detection of detrimental roxarsone (ROX) with high quenching (7.56 × 104 M-1) and very low sensitivity (68 nM). Apart from varying degrees of an energy-transfer mechanism, the fluorosensing of ROX is comprehensively supported by in-depth DFT studies that manifest alteration of MOF energy levels in the presence of organoarsenic compounds and depict MOF-analyte supramolecular interactions.

Synthesis of a Cd-MOF Fluorescence Sensor and Its Detection of Fe3+, Fluazinam, TNP, and Sulfasalazine Enteric-Coated Tablets in Aqueous Solution

A Cd-based metal-organic framework (Cd-MOF), named after {[Cd(ttc)(H₂O)]·H₂O}_n (ttc = 1-imidazole-1-yl-2,4,6-benzene-tricarboxylic acid), was synthesized using the solvothermal reaction. The single-crystal structure was determined by single X-ray diffraction analysis, and crystalline characteristics and composition were confirmed by powder X-ray diffraction (PXRD) and thermogravimetric analysis (TG), respectively. Structural analysis showed that the Cd²⁺ ion is in the seven-coordinated mode, in which ttc^2- ion adopts the μ₄-η¹-η¹-η²-η² coordination mode. It is worth noting that the Cd²⁺ ion is connected to ttc^2- to form a 2D network, and the adjacent 2D network is expanded into a 3D supramolecular network structure through weak hydrogen bonds. The fluorescence sensing experiments indicated that Cd-MOF could not only be used as a fluorescence sensor for Fe³⁺, fluazinam (FLU), and 2,4,6-trinitrophenolol (TNP) but also for sulfasalazine detection in aqueous solution. To verify the sensitivity of the fluorescent probe, we calculated its detection limit: 5.34 × 10^-8 M (Fe³⁺), 7.8 × 10^-8 M (FLU), 1.21 × 10^-7 M (TNP), and 2.67 × 10^-7 M (SECT). In addition, the quenching mechanism was thoroughly studied.

Redox-Active and Urea-Engineered-Entangled MOFs for High-Efficiency Water Oxidation and Elevated Temperature Advanced CO2 Separation Cum Organic-Site-Driven Mild-Condition Cycloaddition

Development of the multifaceted metal-organic framework (MOF) with in situ engineered task-specific sites can promise proficient oxygen evolution reaction (OER) and high-temperature adsorption cum mild-condition fixation of CO₂. In fact, effective assimilation of these attributes onto a single material with advance performance characteristics is practically imperative in view of renewable energy application and carbon-footprint reduction. Herein, we developed a three-fold interpenetrated robust Co(II) framework that embraces both redox-active and hydrogen-bond donor moieties inside the microporous channel. The activated MOF demonstrates notable OER catalysis in alkaline medium via quasi-reversible Co²⁺/Co³⁺ couple and unveils low overpotential with impressive 53.5 mV/dec Tafel slope that overpowers some benchmark, commercial, as well as contemporary materials. In particular, significantly increased turnover frequency (3.313 s^-1 at 400 mV) and fairly low charge-transfer resistance (3.02 Ω) compared to Co₃O₄, NiO, and majority of redox-active MOFs together with 91% Faradaic efficiency and notable framework durability after multiple OER cycles endorse high-performance water oxidation. Pore-wall decked urea groups benefit appreciable CO₂ adsorption even at elevated temperatures with considerable MOF-CO₂ interactions and exhibit recurrent capture-release cycles at diverse temperatures. Interestingly, CO₂ selectivity displays radical upsurge with temperature rise, affording 40% improved CO₂/N₂ value of 200 at 313 K, which outperforms many porous adsorbents and delineates real-time CO₂ scavenging potential. The guest-free MOF effectively catalyzes solvent-free CO₂ cycloaddition with broad substrate tolerance and satisfactory reusability under relatively mild condition. Opposed to the common Lewis acid-mediated reaction, two-point hydrogen-bonding activates the substrate, as supported from controlled experiments, juxtaposing the performance of an un-functionalized MOF and fluorescence modification-derived framework-epoxide interaction, providing valuable insights on unconventional cycloaddition route in the MOF.

Two pillared-layer metal-organic frameworks based on the pinwheel trinuclear carboxylate-clusters of Zn(II) and Co(II): synthesis, crystal structures, magnetic study, and Lewis acid catalysis

Using a dicarboxylic acid, [1,1'-biphenyl]-4,4'-dicarboxylic acid (H₂L1) and an exobidentate ligand, (1E,1'E)-N,N'-(1,4-phenylene)bis(1-(pyridin-4-yl)methanimine) (L2), two 3D interpenetrated networks, {[Zn₃(L1)₃(L2)]·9H₂O}_n (Zn-MOF) and {[Co₃(L1)₃(L2)(DMF)]·0.5DMF}_n (Co-MOF), have been prepared in good yields. The crystal structure analysis of Zn-MOF and Co-MOF revealed that both have a 3D pillared-layer structure based on pinwheel trinuclear metal-carboxylate clusters as secondary building units (SBUs). Furthermore, the structures also exhibited three-fold interpenetration. Although the overall networks in Zn-MOF and Co-MOF showed significant resemblances, there are marked differences in their crystal structures, which are associated with the coordination environment of the metal centre and the binding modes of the carboxylates. Gas adsorption studies (N₂ at 77 K and 1 bar) indicated that Co-MOF is more porous than Zn-MOF. Magnetic measurements on Co-MOF indicate a significant antiferromagnetic interaction (45 K to 303 K) between trimeric Co(II) S = 3/2 spins through syn-syn carboxylato bridges. Both MOFs were studied for the Lewis acid catalyzed Knoevenagel condensation reactions between benzaldehydes and malononitrile with an active methylene group, where Zn-MOF was found to be a better catalyst than Co-MOF. This was supported by the Monte Carlo simulations indicating the better substrate binding ability of Zn-MOF than Co-MOF.

Dual-Color 2D Lead-Organic Framework with Two-Fold Interlocking Structures for the Detection of Nitrofuran Antibiotics and 2,6-Dichloro-4-nitroaniline

The misuse of organic pollutants such as nitrofuran antibiotics (NFAs) and 2,6-dichloro-4-nitroaniline (DCN) has become a hot topic of global concern, and developing rapid, efficient, and accurate techniques for detecting NFAs and pesticides in water is a major challenge. Here, we designed a novel lead-based anion 2D metal-organic framework (MOF){[(CH₃)₂NH₂]₂[Pb(TCBPE)(H₂O)₂]}_n (F3) with interlocking structures, in which TCBPE stands for 1,1,2,2-tetra(4-carboxylbiphenyl)ethylene. Powder X-ray diffraction and thermogravimetric analysis revealed that F3 has excellent chemical and solvent stability. It is worth noting that F3 has a grinding discoloration effect. The solvent-protected grinding approach achieved F3B with a high quantum yield (QY = 73.77%) and blue fluorescence, while the direct grinding method produced F3Y with a high quantum yield (QY = 37.27%) and yellow-green fluorescence. Importantly, F3B can detect NFAs in water rapidly and sensitively while remaining unaffected by other antibiotics. F3Y can identify DCN in water quickly and selectively while remaining unchanged by other pesticides. F3B demonstrated high selectivity and rapid response to NFAs at a limit of detection (LOD) as low as 0.26 μM, while F3Y indicated high selectivity and responded quickly to DCN in water at an LOD as low as 0.14 μM. The method was successfully applied to detect NFAs in actual water samples of the fish tanks and ponds as well as the pesticide DCN in soil samples. The recovery rates were 97.0-105.15% and 102.2-106.48%, and the relative standard deviations were 0.63-1.45% and 0.29-1.69%, respectively. In addition, F3B and F3Y can be made into fluorescent test papers for the visual detection of NFAs and DCN, respectively. Combined with experiments and density functional theory calculations, the mechanism of fluorescence quenching of MOFs by target analytes was also revealed.

Selective and Multicyclic CO2 Adsorption with Visible Light-Driven Photodegradation of Organic Dyes in a Robust Metal-Organic Framework Embracing Heteroatom-Affixed Pores

Pore environment modulation with polarizing groups is one of the essential prerequisites for selective carbon dioxide (CO₂) adsorption in metal-organic frameworks (MOFs), wherein judicious installation of the photocatalytic feature can promise visible light-triggered degradation of toxic organic dye molecules. However, astute amalgamation of both these attributes over a single MOF is rather rare, yet much anticipated in view of sustainable applications. Pore engineering is effectively harnessed in a Zn(II)-based three-dimensional (3D) MOF, CSMCRI-16 (CSMCRI = Central Salt and Marine Chemicals Research Institute), through mixed-ligand assembly of a N-rich linker (L), 4,4'-oxybis(benzoic acid) (H₂oba) ligand, and [Zn₂(CO₂)₄N₂] paddle-wheel secondary building units (SBUs). The noninterpenetrated structure contains unbound nitrogen and accessible oxygen atom-decorated porous channels and exhibits admirable stability in diverse organic solvents, open air, and at elevated temperatures. The heteroatom-decorated porous channels facilitated excellent CO₂ uptake in the activated MOF (16a) with high selectivity over N₂ (CO₂/N₂: 155.3) at 273 K. The framework further exhibits reasonable CO₂ affinity and multicyclic CO₂ sorption recurrence without a significant loss in the uptake capacity. Benefitting from the presence of the [Zn₂(CO₂)₄N₂] cluster in conjugation with π-conjugated organic ligands, the extended 3D network revealed an optical band gap energy of 2.55 eV, which makes the MOF an efficient photocatalyst toward the degradation of the cationic dyes crystal violet (CV) and methylene blue (MB) in the presence of a simple 40 W visible light lamp without any assistance of external oxidants. The catalyst exhibits multicyclic performance and short reaction time in addition to the fact that catalytic efficiencies (CV: 97.2%, MB: 97.8%) are comparable to those of contemporary materials.

Brønsted Acid-Functionalized Ionic Co(II) Framework: A Tailored Vessel for Electrocatalytic Oxygen Evolution and Size-Exclusive Optical Speciation of Biothiols

Metal-organic frameworks (MOFs) not only combine globally demanded renewable energy generation and environmental remediation onto a single platform but also rationalize structure-performance synergies to devise smarter materials with remarkable performance. The robust and non-interpenetrated cationic MOF exemplifies a unique bifunctional scaffold for the efficient electrochemical oxygen evolution reaction (OER) and ultrasensitive monitoring of biohazards. The microporous framework containing Brønsted acid-functionalized [Co₂(μ₂-OH)(CO₂)₂] secondary building units (SBUs) exhibits remarkable OER performance in 1 M KOH, requiring 410 mV overpotential to obtain 10 mA cm^-2 anodic current density, and a low Tafel slope of 55 mV/dec with 93.1% Faradaic efficiency. Apart from the high turnover frequency and electrochemically assessable surface area, steady OER performance over 500 cycles under potentiodynamic and potentiostatic conditions result in long-term catalyst durability. The highly emissive attribute from nitrogen-rich fluorescent struts benefits the MOF in recyclable and selective fluoro-detection of three biothiols (l-cysteine, homocysteine, and glutathione) in water with a fast response time. In addition to colorimetric monitoring in the solid and solution phases, control experiments validate size-exclusive biothiol speciation through molecular-dimension-mediated pore diffusion. The role of SBUs in the OER mechanism is detailed from density functional theory-derived free energy analysis, which also validates the importance of accessible N-sites in sensing via portraying framework-analyte supramolecular interactions.

Multi-responsive luminescent coordination polymer nanosheets for selective detection of nitroaromatics

Sensitive sensing of nitroaromatic compounds (NACs) is realized by using luminescent lanthanum-tricarboxytriphenylamine (La-TCA) nanosheets fabricated by a top-down sonication assisted strategy. The accessible Lewis base sites and electron-rich fluorophores on the surface of the La-TCA nanosheets enable them to interact with electron-deficient NACs, delivering multi-responsive behaviours (emission intensity quenching, wavelength red-shift and valley) for hydroxyl group NACs.

Mixed-Linker Isoreticular Zn(II) Metal-Organic Frameworks as Brønsted Acid-Base Bifunctional Catalysts for Knoevenagel Condensation Reactions

Multicomponent metal-organic frameworks (MOFs) have received an increasing amount of attention due to their potential to produce new topologies, pore metrics, and functionalities compared to MOFs with a single metal cluster and one organic linker. Herein, five isoreticular Zn MOFs were obtained by mixing two types of linear ditopic linkers in a one-pot solvothermal synthesis. Interestingly, in the resulting Zn MOFs a six-connected cyclic trinuclear Zn(II) cluster and an eight-connected linear trinuclear Zn(II) cluster coexist, leading to an uncommon (6,8)-connected network. Catalytic activities toward the solvent-free Knoevenagel reactions were observed for all of these MOFs. Further experimental and computational studies suggest that they are Brønsted acid-base bifunctional catalysts. Through chemical modifications of dicarboxylate ligands, including their aromatic backbones and substituents, we have successfully implemented reticular chemistry for the modulations of pore sizes, surface areas, and catalytic performances in a series of four-component isoreticular MOFs.

A Ni(II) Metal-Organic Framework with Mixed Carboxylate and Bipyridine Ligands for Ultrafast and Selective Sensing of Explosives and Photoelectrochemical Hydrogen Evolution

We report a Ni-MOF (nickel metal-organic framework), Ni-SIP-BPY, synthesized by using two linkers 5-sulfoisophthalic acid (SIP) and 4,4'-bipyridine (BPY) simultaneously. It displays an orthorhombic crystal system with the Ama2 space group: a = 31.425 Å, b = 19.524 Å, c = 11.2074 Å, α = 90°, β = 90°, γ = 90°, and two different types of nickel(II) centers. Interestingly, Ni-SIP-BPY exhibits excellent sensitivity (limit of detection, 87 ppb) and selectivity toward the 2,4,6-trinitrophenol (TNP)-like mutagenic environmental toxin in the pool of its other congeners via "turn-off" fluorescence response by the synergism of resonance energy transfer, photoinduced electron transfer, intermolecular charge transfer, π-π interactions, and competitive absorption processes. Experimental studies along with corroborated theoretical experimentation, vide density functional theory studies, shed light on determining the plausible mechanistic pathway in selective TNP detection, which is highly beneficial in the context of homeland security perspective. Along with the sensing of nitroaromatic explosives, the moderately low band gap and the p-type semiconducting behavior of Ni-SIP-BPY make it suitable as a photoanode material for visible-light-driven water splitting. Highly active surface functionalities and sufficient conduction band minima effectively reduce the water and result in a seven times higher photocurrent density under visible-light illumination.

Urea-engineering mediated hydrogen-bond donating Friedel−Crafts alkylation of indoles and nitroalkenes in dual-functionalized and microporous metal-organic framework with high recyclability and pore-fitting-induced size-selectivity

As an effective alternative to Lewis acid activation, hydrogen-bond donating (HBD) organo-catalysis denotes a powerful construction tool to important classes of carbon–carbon bonds, wherein metal-organic frameworks (MOFs) alleviate issues like...

Naphthalene-tagged highly stable and reusable luminescent metal-organic probes for selective and fast detection of 4-nitroaniline in water

In this paper we report the synthesis, characterization, properties and application of four new Zn(II) and Cd(II) based luminescent metal-organic probes, {[Zn(mbhna)(bpea)]}n (1), {[Cd(mbhna)(bpea)]}n (2), {[Zn(mbhna)(bpba)].CH3OH.H2O}n (3) and {[Cd(mbhna)(bpba)]}n (4),...

A low-dimensional N-rich coordination polymer as an effective fluorescence sensor for 2,4,6-trinitrophenol detection in an aqueous medium

Stable one-dimensional coordination polymer is used as a highly selective sensor for the detection of TNP.

Supramolecular assemblies of Zn(II) complexes with D-π-A ligand for sensing specific organic molecules

It is attractive but challenging to develop effective fluorescent sensors for detecting specific organic compound. In this study, we designed and synthesized three Zn(II) complexes [Zn(3N3PY)2](NO3)2·3.5CH3OH (1), [Zn(3N3PY)(BIN)]·1.5DMF (2) and...

Nanochannel-Based {BaZn}-Organic Framework for Catalytic Activity on Cycloaddition Reaction of Epoxides with CO2 and Deacetalization-Knoevenagel Condensation

Because of the integrated properties from chemically dissimilar metals, microporous heterometallic MOFs have wider potential applicability, which prompts us to explore the tendency collocation of different metal cations in the...

Intrinsic-Unsaturation-Enriched Biporous and Chemorobust Cu(II) Framework for Efficient Catalytic CO2 Fixation and Pore-Fitting Actuated Size-Exclusive Hantzsch Condensation with Mechanistic Validation

Carbon dioxide (CO₂) utilization and one-pot Hantzsch condensation denote two important protocols pertinent to sustainable agenda because of the obvious advantages like reduction in chemical usage, short reaction time, and minimum waste generation. To this end, the astute combination of optimum-sized pore structure with built-in Lewis acid center in metal-organic frameworks (MOFs) can bring about such reactions under energetically favorable conditions and offer a step forward to size-exclusive catalysis. The chemoresistant and twofold interpenetrated Cu(II) framework CSMCRI-13 (CSMCRI = Central Salt & Marine Chemicals Research Institute) is built from a C₃-symmetric tricarboxylate ligand and an N,N'-donor linker that undergo incisive amalgamation of the paddle-wheel [Cu₂(COO)₄] secondary building unit (SBU) and the intrinsically unsaturated Cu(II) node with four coordination. The microporous structure features a dual-pore containing cage-like network with free oxygen-atom-enriched cavities and exhibits appreciable CO₂ adsorption with moderate MOF-CO₂ interaction in activated form (13a). Benefitting from both, the coordinatively frustrated metal center containing MOF acts as a highly synergistic and solvent-free catalyst in CO₂ cycloaddition reaction under an 8 bar CO₂ pressure at 70 °C in 6 h. The catalyst furnished admirable reactivity and fair recyclability with a wide range of substrates, wherein sterically encumbered and long-chain epoxides produced poor conversion. This MOF further executes highly regenerable Hantzsch condensation reaction under mild condition with superior activity to contemporary materials, where most of the 1,4-dihydropyridine derivatives are additionally characterized through the single-crystal X-ray diffraction analysis. Importantly, mechanistic proof of the tricomponent condensation involving built-in Lewis acid sites is validated from several control experiments and in-depth analytical studies. To the best of the single-step multicomponent reaction, substrate molecules having incompatible molecular dimension to that of pore size of the framework resulted insignificant conversion and demonstrated the first-ever pore-fitting-induced size selectivity in Hantzsch condensation.