Tunable High Refractive Index Polymer Hybrid and Polymer-Inorganic Nanocomposite Coatings

A Facile One-Step Conversion of Biobased Magnolol (Honokiol) toward High Refractive Materials

A series of polymers with both high refractive index and high Abbe number have been successfully synthesized through the photoclick thiol-ene reaction between the monomers derived from biobased magnolol (or honokiol) and commercial mercaptans and thiophenols. The polymer films not only exhibit a high refractive index and a high Abbe number but also display a transmittance of up to 90% in a range of wavelengths from 550 to 2000 nm and nearly 0% in the UV region. Moreover, these polymers also display low haze values in the visible-light region as well as exhibit good thermostability. These data indicate that they have potential applications for the fabrication of optical lenses and anti-UV coatings. In particular, this series of polymers are readily used for industrialization due to its excellent optical properties but low expense, simplicity, and efficiency of synthesis.

Silica-Polymer Heterogeneous Hybrid Integrated Mach-Zehnder Interferometer Optical Waveguide Temperature Sensor

In this paper, a temperature sensor based on a polymer-silica heterogeneous integrated Mach-Zehnder interferometer (MZI) structure is proposed. The MZI structure consists of a polymer waveguide arm and a doped silica waveguide arm. Due to the opposite thermal optical coefficients of polymers and silica, the hybrid integrated MZI structure enhances the temperature sensing characteristics. The direct coupling method and side coupling method are introduced to reduce the coupling loss of the device. The simulation results show that the side coupling structure has lower coupling loss and greater manufacturing tolerance compared to the direct coupling structure. The side coupling loss for PMMA material-based devices, NOA material-based devices, and SU-8 material-based devices is 0.104 dB, 0.294 dB, and 0.618 dB, respectively. The sensitivity (S) values of the three hybrid devices are -6.85 nm/K, -6.48 nm/K, and -2.30 nm/K, which are an order of magnitude higher than those of an all-polymer waveguide temperature sensor. We calculated the temperature responsivity (RT) (FSR→∞) of the three devices as 13.16 × 10-5 K, 32.20 × 10-5 K, and 20.20 × 10-5 K, suggesting that high thermo-optic coefficient polymer materials and the hybrid integration method have a promising application in the field of on-chip temperature sensing.

Plasmonic Characterization of 3D Printable Metal-Polymer Nanocomposites

Plasmonic polymer nanocomposites (i.e., polymer matrices containing plasmonic nanostructures) are appealing candidates for the development of manifold technological devices relying on light-matter interactions, provided that they have inherent properties and processing capabilities. The smart development of plasmonic nanocomposites requires in-depth optical analyses proving the material performance, along with correlative studies guiding the synthesis of tailored materials. Importantly, plasmon resonances emerging from metal nanoparticles affect the macroscopic optical response of the nanocomposite, leading to far- and near-field perturbations useful to address the optical activity of the material. We analyze the plasmonic behavior of two nanocomposites suitable for 3D printing, based on acrylic resin matrices loaded with Au or Ag nanoparticles. We compare experimental and computed UV-vis macroscopic spectra (far-field) with single-particle electron energy loss spectroscopy (EELS) analyses (near-field). We extended the calculations of Au and Ag plasmon-related resonances over different environments and nanoparticle sizes. Discrepancies between UV-vis and EELS are dependent on the interplay between the metal considered, the surrounding media, and the size of the nanoparticles. The study allows comparing in detail the plasmonic performance of Au- and Ag-polymer nanocomposites, whose plasmonic response is better addressed, accounting for their intended applications (i.e., whether they rely on far- or near-field interactions).

High Quantum Yield Amino Acid Carbon Quantum Dots with Unparalleled Refractive Index

Carbon quantum dots (CQDs) are one of the most promising types of fluorescent nanomaterials due to their exceptional water solubility, excellent optical properties, biocompatibility, chemical inertness, excellent refractive index, and photostability. Nitrogen-containing CQDs, which include amino acid based CQDs, are especially attractive due to their high quantum yield, thermal stability, and potential biomedical applications. Recent studies have attempted to improve the preparation of amino acid based CQDs. However, the highest quantum yield obtained for these dots was only 44%. Furthermore, the refractive indices of amino acid derived CQDs were not determined. Here, we systematically explored the performance of CQDs prepared from all 20 coded amino acids using modified hydrothermal techniques allowing more passivation layers on the surface of the dots to optimize their performance. Intriguingly, we obtained the highest refractive indices ever reported for any CQDs. The values differed among the amino acids, with the highest refractive indices found for positively charged amino acids including arginine-CQDs (∼2.1), histidine-CQDs (∼2.0), and lysine-CQDs (∼1.8). Furthermore, the arginine-CQDs reported here showed a nearly 2-fold increase in the quantum yield (∼86%) and a longer decay time (∼8.0 ns) compared to previous reports. In addition, we also demonstrated that all amino acid based CQD materials displayed excitation-dependent emission profiles (from UV to visible) and were photostable, water-soluble, noncytotoxic, and excellent for high contrast live cell imaging or bioimaging. These results indicate that amino acid based CQD materials are high-refractive-index materials applicable for optoelectronic devices, bioimaging, biosensing, and studying cellular organelles in vivo. This extraordinary RI may be highly useful for exploring cellular elements with different densities.

Polymer and Hybrid Optical Devices Manipulated by the Thermo-Optic Effect

The thermo-optic effect is a crucial driving mechanism for optical devices. The application of the thermo-optic effect in integrated photonics has received extensive investigation, with continuous progress in the performance and fabrication processes of thermo-optic devices. Due to the high thermo-optic coefficient, polymers have become an excellent candidate for the preparation of high-performance thermo-optic devices. Firstly, this review briefly introduces the principle of the thermo-optic effect and the materials commonly used. In the third section, a brief introduction to the waveguide structure of thermo-optic devices is provided. In addition, three kinds of thermo-optic devices based on polymers, including an optical switch, a variable optical attenuator, and a temperature sensor, are reviewed. In the fourth section, the typical fabrication processes for waveguide devices based on polymers are introduced. Finally, thermo-optic devices play important roles in various applications. Nevertheless, the large-scale integrated applications of polymer-based thermo-optic devices are still worth investigating. Therefore, we propose a future direction for the development of polymers.

High Refractive Index Polymer Thin Films by Charge-Transfer Complexation

High refractive index polymers are essential in next-generation flexible optical and optoelectronic devices. This paper describes a simple synthetic method to prepare polymeric optical coatings possessing high refractive indexes. Poly(4-vinylpyridine) (P4VP) thin films prepared using initiated chemical vapor deposition are exposed to highly polarizable halogen molecules to form stable charge-transfer complexes: P4VP-IX (X = I, Br, and Cl). Fourier transform infrared spectroscopy was used to confirm the formation of charge-transfer complexes. Characterized by spectroscopic ellipsometry, the maximum refractive index of 2.08 at 587.6 nm is obtained for P4VP-I₂. For P4VP-IBr and P4VP-ICl, the maximum refractive indexes are 1.849 and 1.774, respectively. By controlling the concentration of charge-transfer complexes, either through the halogen incorporation step or polymer composition through copolymerization with ethylene glycol dimethacrylate, the refractive indexes of the polymer thin films can be precisely controlled. The feasibility of P4VP-IX materials as optical coatings is also explored. The refractive index and thickness uniformity of a P4VP-I₂ film over a 10 mm diameter circular area were characterized, showing standard deviations of 0.0769 and 1.91%, respectively.

Photo-Crosslinkable Inorganic/Organic Sulfur Polymers

Inverse vulcanization techniques are used to fabricate thermodynamically stable, sulfur polymers. Sulfur-based polymers exhibit higher refractive indices and improved transparency in the mid-wave infrared region compared with most organic polymers. Herein, the postsynthetic modification of sulfur polymers created via inverse vulcanization to generate novel, inorganic/organic photoresists is discussed. Amine-containing sulfur resins are postfunctionalized with cross-linkable alkynes. The sulfur-based materials undergo rapid photo-crosslinking to generate patternable films within 10 min under UV irradiation (365 nm). The development of these resins enables sulfur polymers to be utilized in processes where spatial and hierarchical control is necessary. The generation of this class of materials also expands on sulfur-based organic polymer systems with optical applications.