A Near-Infrared-Triggered Dynamic Wrinkling Biointerface for Noninvasive Harvesting of Practical Cell Sheets

Reliable Harvest of Injectable Human Mesenchymal Stem Cell Sheets by Modulating Cell-Substrate Adhesion Strength

Cell sheet engineering has emerged as a promising scaffold-free strategy in cell-based therapeutics, preserving essential cell-cell and cell-extracellular matrix (ECM) interactions. To enable minimally invasive delivery, a key challenge relies on making the cell sheets compatible with injection-based administration without subjecting sensitive cells to physical or thermal stresses. This study addresses a reliable method for controlling cell sheet dimensions by combining differential cell adhesion-guided micropatterning along with an isothermal detachment method. The surface composition of a copolymer, poly(ethylene glycol dimethacrylate-co-hydroxyethyl methacrylate) is delicately controlled via initiated chemical vapor deposition to ensure intact cell adhesion and rapid cell detachment under isothermal condition. The optimized surface further allows hydrophobic microcontact printing for creating micron-sized sheets. Human mesenchymal stem cell sheets harvested with this method show preserved ECM without compromising cell viability after both detachment and injection. Moreover, the injected cell sheets substantially enhance the angiogenic potential of human umbilical vein endothelial cells, demonstrating the sustained therapeutic activity of the cell sheet after injection. It is believed that this approach has great potential to broaden the scope of cell sheet engineering, serving as a robust platform for regenerative medicine.

Fibronectin Connecting Cell Sheet Based on Click Chemistry for Wound Repair

As a living repair material, cell sheet exhibits significant potential in wound repair. Nonetheless, wound healing is a complicated and protracted process that necessitates specific repair functions at each stage, including hemostasis and antibacterial activity. In this work, on the basis of harvesting the cell sheet via a photothermal response strategy, a fibronectin attached cell sheet (FACS) is prepared to enhance its wound repair capability. For this purpose, the azide group (N3 ) is initially tagged onto the cell surface through metabolic glycoengineering of unnatural sugars, and then the conjugate (DBCO-fibronectin) comprises of the dibenzocyclooctyne (DBCO) and fibronectin with multiple wound repair functions is linked to N3 using click chemistry. Biological evaluations following this demonstrates that the FACS preparation exhibits excellent biocompatibility, and the fibronectin modification enhances the capacity for cell proliferation and migration. Moreover, in vivo wound healing experiment confirms the reparative efficacy of FACS. It not only has a wound closure rate 1.46 times that of a conventional cell sheet but also reduces inflammatory cell infiltration, promotes hair follicle and blood vessel regeneration, and encourages collagen deposition. This strategy holds enormous clinical potential and paves the way for advanced functional modifications of cell sheets.

Tailoring cell sheets for biomedical applications

Cell sheet technology has emerged as a novel scaffold-free approach for cell-based therapies in regenerative medicine. Techniques for harvesting cell sheets are essential to preserve the integrity of living cell sheets. This review provides an overview of fundamental technologies to fabricate cell sheets and recent advances in cell sheet-based tissue engineering. In addition to the commonly used temperature-responsive systems, we introduce alternative approaches, such as ROS-induced, magnetic-controlled, and light-induced cell sheet technologies. Moreover, we discuss the modification of the cell sheet to improve its function, including stacking, genetic modification, and vascularization. With the significant advances in cell sheet technology, cell sheets have been widely applied in various tissues and organs, including but not limited to the lung, cornea, cartilage, periodontium, heart, and liver. This review further describes both the preclinical and clinical applications of cell sheets. We believe that the progress in cell sheet technology would further propel its biomedical applications.

Precise Preparation of a Multilayer Tubular Cell Sheet with Well-Aligned Cells in Different Layers to Simulate Native Arteries

Compared with artificial vascular grafts, bottom-up tubular cell sheets (TCSs) without scaffolds have shown promise for patients with cardiovascular disease. However, TCS therapy also faces the challenges of lengthy maturation time, elaborate operation, and weak mechanical strength. In this work, a structured small-diameter vascular graft (SDVG), consisting of three layers of TCSs, with different cell types and arrangements, was fabricated using layer-by-layer assembly of naturally formed TCSs and further cell culture. To this end, a surface-patterned collagen-coated cylindrical substrate was designed for the efficient harvesting of naturally formed and well-aligned TCSs. The patterned collagen (type I) layer facilitated the adhesion and orientation of cells, and a continuous tubular cell monolayer was naturally formed after approximately 4 days in cell culture. Biocompatible near-infrared (NIR) light was used to trigger the photothermal phase transition of the collagen coated on the cylindrical substrate to dissociate the collagen layer. As a result, an intact TCS could be harvested within a few minutes. These naturally formed and well-aligned TCSs exhibited outstanding free-standing performance without rugosity, facilitating their operability and practical application. A ring tensile test showed that orientation was critical for improving the mechanical properties of TCSs. The layer-by-layer assembly of SDVGs not only is easy to manipulate and has a short preparation time but also overcomes the bottleneck of forming a hierarchically structured vascular graft. This approach shows promise for repairing damaged blood vessels.

BMP-2/TGF-β1 gene insertion into ligament-derived stem cells sheet promotes tendon-bone healing in a mouse

Bone morphogenetic protein-2 (BMP-2) and transforming growth factor-β1 (TGF-β1) reportedly induce the osteogenic and tenogenic differentiation of anterior cruciate ligament (ACL)-derived stem cells (LDSCs), respectively. However, few studies have investigated the effect of BMP-2/TGF-β1 on the differentiation of LDSC. We developed a BMP-2/TGF-β1 gene insertion into an LDSC cell sheet that promotes tendon-bone healing in a mouse ACL reconstruction (ACLR) model. CD34⁺ LDSCs were isolated from human ACL stump tissues, virally transduced to express BMP-2 or TGF-β1, and then embedded within cell sheets. All mice underwent ACLR using an autograft wrapped with a cell sheet and were randomly divided into three groups: BMP-2-, TGF-β1-, and BMP-2/TGF-β1-transduced. At 4 and 8 weeks, tendon-bone healing was evaluated by micro-CT, biomechanical test, and histological analysis. BMP-2 and TGF-β1 promoted the osteogenic and tenogenic differentiation of LDSC in vitro. BMP-2/TGF-β1-transduced LDSC sheet application contributed to early improvement in mean failure load and graft stiffness, accelerated maturation of the tendon-bone junction, and inhibited bone tunnel widening. Furthermore, reduced M1 macrophage infiltration and a higher M2 macrophage percentage were observed in the BMP-2/TGF-β1-transduced LDSC group. This work demonstrated that BMP-2 and TGF-β1 promoted CD34⁺ LDSCs osteogenic and tenogenic differentiation in vitro and in vivo, which accelerated the tendon-bone healing after ACLR using autografts wrapped with cell sheets in a mouse model.

Superrepellent Porous Polymer Surfaces by Replication from Wrinkled Polydimethylsiloxane/Parylene F

Superrepellent surfaces, such as micro/nanostructured surfaces, are of key importance in both academia and industry for emerging applications in areas such as self-cleaning, drag reduction, and oil repellence. Engineering these surfaces is achieved through the combination of the required surface topography, such as porosity, with low-surface-energy materials. The surface topography is crucial for achieving high liquid repellence and low roll-off angles. In general, the combination of micro- and nanostructures is most promising in achieving high repellence. In this work, we report the enhancement of wetting properties of porous polymers by replication from wrinkled Parylene F (PF)-coated polydimethylsiloxane (PDMS). Fluorinated polymer foam “Fluoropor” serves as the low-surface-energy polymer. The wrinkled molds are achieved via the deposition of a thin PF layer onto the soft PDMS substrates. Through consecutive supercritical drying, superrepellent surfaces with a high surface porosity and a high water contact angle (CA) of >165° are achieved. The replicated surfaces show low roll-off angles (ROA) <10° for water and <21° for ethylene glycol. Moreover, the introduction of the micro-wrinkles to Fluoropor not only enhances its liquid repellence for water and ethylene glycol but also for liquids with low surface tension, such as n-hexadecane.

Therapeutic potential of dental pulp stem cells and their derivatives: Insights from basic research toward clinical applications

For more than 20 years, researchers have isolated and identified postnatal dental pulp stem cells (DPSCs) from different teeth, including natal teeth, exfoliated deciduous teeth, healthy teeth, and diseased teeth. Their mesenchymal stem cell (MSC)-like immunophenotypic characteristics, high proliferation rate, potential for multidirectional differentiation and biological features were demonstrated to be superior to those of bone marrow MSCs. In addition, several main application forms of DPSCs and their derivatives have been investigated, including stem cell injections, modified stem cells, stem cell sheets and stem cell spheroids. In vitro and in vivo administration of DPSCs and their derivatives exhibited beneficial effects in various disease models of different tissues and organs. Therefore, DPSCs and their derivatives are regarded as excellent candidates for stem cell-based tissue regeneration. In this review, we aim to provide an overview of the potential application of DPSCs and their derivatives in the field of regenerative medicine. We describe the similarities and differences of DPSCs isolated from donors of different ages and health conditions. The methodologies for therapeutic administration of DPSCs and their derivatives are introduced, including single injections and the transplantation of the cells with a support, as cell sheets, or as cell spheroids. We also summarize the underlying mechanisms of the regenerative potential of DPSCs.

Natural Tissue-Imprinted Biointerface for the Topographical Education of a Biomimetic Cell Sheet

Cell sheet engineering as a cell-based scaffold-free therapy is promising in tissue engineering, allowing precise transforming treatments for various tissue damage. However, the current cutting-edge techniques are still hampered by the difficulty in mimicking the natural tissue organizations and the corresponding physiological functions. In this work, cell-imprinting technology using the natural tissue as a template was proposed to rationally educate the cellular alignment in the cell sheet. Through this technique, we obtained temporary templates with morphological structure complementary to native tissues and then directly transferred the structure on the template to the collagen layer on a photothermally convertible substrate by secondary imprinting replication. The resultant biomimetic interface was used for cell culture and release to obtain a cell sheet with a texture similar to the natural tissue morphology. Different from conventional photolithography, the natural tissue-imprinted biointerface guides the geometry of cell sheets in the way of natural principles instead of stereotyped or overuniform cell organization. Simultaneously, a near-infrared laser (NIR) was used to irradiate the photothermally responsive substrate to obtain complete cell sheets efficiently and nondestructively. The natural tissue-educated myocardium cell sheets exhibited good physiological activity and biomimetic biofunctions, such as mechanical properties and physiological performances. This approach might open an inspiring prospect in regenerative medicine and offer a new approach to realizing the biomimetic tissue construction.

Strong and tough self-wrinkling polyelectrolyte hydrogels constructed via a diffusion-complexation strategy

Self-wrinkling hydrogels enable various engineering and biomedical applications. The major challenge is to couple the self-wrinkling technologies and enhancement strategies, so as to get rid of the poor mechanical properties of existing self-wrinkling gels. Herein we present a facile diffusion-complexation strategy for constructing strong and ultratough self-wrinkling polyelectrolyte hydrogels with programmable wrinkled structures and customizable 3D configurations. Driven by the diffusion of low-molecular-weight chitosan polycations into the polyanion hydrogels, the high-modulus polyelectrolyte complexation shells can form directly on the hydrogel surface. Meanwhile, the polyanion hydrogels deswell/shrink due to the low osmotic pressure, which applies an isotropous surface compressive stress for inducing the formation of polygonal wrinkled structures. When the diffusion-complexation reaction occurs on a pre-stretched hydrogel sheet, the long-range ordered wrinkled structures can form during the springback/recovery of the hydrogel matrix. Moreover, through controlling the regions of diffusion-complexation reaction on the pre-stretched hydrogels, they can be spontaneously transformed into various 3D configurations with ordered wrinkled structures. Notably, because of the introduction of plenty of electrostatic binding (i.e., sacrificial bonds), the as-prepared self-wrinkling gels possess outstanding mechanical properties, far superior to the reported ones. This diffusion-complexation strategy paves the way for the on-demand design of high-performance self-wrinkling hydrogels.

Mechanical Behavior of Biomimetic Oriented Cell Sheets from a Perspective of Living Materials

When compared to random cell organization, cell sheets with well-organized cell orientation are similar to natural tissues exhibiting better mechanical strength. Furthermore, as living materials, the mechanical strength of cell...

A Dual-Responsive Peptide-Based Smart Biointerface with Biomimetic Adhesive Behaviors for Bacterial Isolation

As mimics of the extracellular matrix, surfaces with the capability of capturing and releasing specific cells in a smart and controllable way play an important role in bacterial isolation. In this work, we fabricated a dual-responsive smart biointerface via peptide self-assembly and reversible covalent chemistry biomimetic adhesion behavior for bacterial isolation. Compared with that of the biointerface based on a single reversible covalent bond, the bacterial enrichment efficiency obtained in this work was 2.3 times higher. Furthermore, the release of bacteria from the surface could be achieved by dual responsiveness (sugar and enzyme), which makes the biointerface more adaptable and compatible under different conditions. Finally, the reusability of the biointerface was verified via peptide self-assembly and the regenerated smart biointerface still showed good bacterial capture stability and excellent release efficiency, which was highly anticipated to be more widely applied in biomaterial science and biomedicine in the future.