Synthesis of High-Quality Mg-MOF-74 Thin Films via Vapor-Assisted Crystallization

Exceptional Electrical Detection of Trace NO2 via Mixed Metal MOF-on-MOF Film-Based Sensors

The tunability of metal-organic frameworks (MOFs) makes them exceptional materials for the development of highly selective, low-power sensors for toxic gas detection. Herein, we demonstrate enhanced detection of NO2 gas by a MOF-based electrical impedance sensor made using a unique mixed metal MOF-on-MOF synthesis. A combined experimental and computational study was performed using the exemplar NixMg1-x-MOF-74 to understand the fundamental structure-property relationships behind metal mixing and MOF film synthesis methods on sensor performance. Density functional theory results indicated that the presence of Ni in Mg-MOF-74 increased framework stability and increased the electron density of states at lower energies near the HOMO, as well as enhanced the NO2-Mg adsorption interaction. Impedance data of the NixMg1-x-MOF-74 films with larger Ni contents showed greater impedance change after exposure to 1 ppm of NO2 gas. Furthermore, when synthesized through either a drop-cast or direct solvothermal film growth approach, the monometallic Ni-based sensors had the best performance. However, the mixed metal NixMg1-x-MOF-74 sensors synthesized through a MOF-on-MOF approach resulted in the highest impedance change, outperforming all monometallic Ni-based sensors. In particular, the mixed metal Ni-on-Mg-MOF-74 film was the best-performing sensor with an impedance change of 309 upon trace NO2 exposure. Change in impedance response after NO2 exposure was improved by 52% compared to the best monometallic Ni-on-Ni-MOF-74 sensor. Structural analysis of the Ni-on-Mg film showed that the first Mg-MOF-74 layer acts as a structural template controlling the structural features of the final film after metal exchange with Ni. This led to improved film quality, evidenced by the greater crystallinity and larger MOF grain sizes, and resulted in enhanced sensor performance which was not achievable through other metal mixing methods. Altogether, this study identifies structure-property relationships and synthetic templating methods that inform MOF-based sensor design, allowing for improved detection of toxic compounds.

The Key to MOF Membrane Fabrication and Application: the Trade-off between Crystallization and Film Formation

Metal-organic frameworks (MOFs), owing the merits of ordered and tailored channel structures in the burgeoning crystalline porous materials, have demonstrated significant promise in construction of high-performance separation membranes. However, precisely because this crystal structure with strong molecular interaction in their lattice provides robust structural integrity and resistance to chemical and thermal degradation, crystalline MOFs typically exhibit insolubility, infusibility, stiffness and brittleness, and therefore their membrane-processing properties are far inferior to the flexible amorphous polymers and hinder their subsequent storage, transportation, and utilization. Hence, focusing on film-formation and crystallization is the foundation for exploring the fabrication and application of MOF membranes. In this review, the film-forming properties of crystalline MOFs are fundamentally analyzed from their inherent characteristics and compared with those of amorphous polymers, influencing factors of polycrystalline MOF membrane formation are summarized, the trade-off relationship between crystallization and membrane formation is discussed, and the strategy solving the film formation of crystalline MOFs in recent years are systematically reviewed, in anticipation of realizing the goal of preparing crystalline membranes with optimized processability and excellent performance.

Fabrication of bimetallic MOF-74 derived materials for high-efficiency adsorption of iodine

Owing to their high porosity, open metal sites, and huge surface area, metal-organic framework (MOF) materials are commonly employed in iodine adsorption processes. Bimetallic MOFs have drawn a lot of attention since mono-metal MOFs have been unable to keep up with the demand. Bimetallic MOF materials still have drawbacks, including limited adsorption capacity, extended adsorption time, poor stability, and poor selectivity, despite their positive performance in radioactive iodine capture. It has been therefore difficult to develop adsorbents with quick iodine adsorption rates and high iodine adsorption efficiency. This study investigated the adsorption properties of a series of bimetallic MOF-74 materials (Mn-Co-MOF-74, Mn-Zn-MOF-74, and Mn-Ni-MOF-74) for radioactive iodine, as well as their design and synthesis utilizing the reflux approach. It was discovered that the adsorption performance of Mn-Ni-MOF-74 for radioiodine was superior to that of the other two bimetallic MOF-74 materials. Using the bimetallic Mn-Ni-MOF-74 as a precursor, a variety of bimetallic MOF-74 derived carbon compounds (Mn-Ni-CX) were prepared by high-temperature pyrolysis. Simultaneously, the structure of the material and the iodine adsorption characteristics have been thoroughly studied.

A new strategy for PET depolymerization: Application of bimetallic MOF-74 as a selective catalyst

Large-volume production of poly(ethylene terephthalate) (PET), especially in the form of bottles and food packaging containers, causes problems with polymer waste management. Waste PET could be recycled thermally, mechanically or chemically and the last method allows to obtain individual monomers, but most often it is carried out in the presence of homogeneous catalysts, that are difficult to separate and reuse. In view of this, this work reports for the first time, application of bimetallic MOF-74 - as heterogeneous catalyst - for depolymerization of PET with high monomer (bishydroxyethyl terephthalate, BHET) recovery. The effect of type and amount of second metal in the MOF-74 (Mg/M) was systematically investigated. The results showed increased activity of MOF-74 (Mg/M) containing Co2+, Zn2+ and Mn2+ as a second metal, while the opposite correlation was observed for Cu2+ and Ni2+. It was found that the highest catalytic activity was demonstrated by the introduction of Mg-Mn into MOF-74 with ratio molar 1:1, which resulted in complete depolymerization of PET and 91.8% BHET yield within 4 h. Furthermore, the obtained catalyst showed good stability in 5 reaction cycles and allowed to achieve high-purity BHET, which was confirmed by HPLC analysis. The as-prepared MOF-74 (Mg/Mn) was easy to separate from the post-reaction mixture, clean and reuse in the next depolymerization reaction.

Morphological and Structural Characterization of (Pt, Au, and Ag) Nanoparticle/Zn-MOF-74 Composites

Metallic nanoparticles (NPs) were decorated onto Zn-MOF-74 crystals by photoreducing different metal precursors (Pt, Au, and Ag) using ultraviolet (UV) light in an aqueous solution with different metal concentrations without using additional stabilizers. X-ray diffraction revealed the three-dimensional structural integrity and crystallinity conservation of Zn-MOF-74 crystals during the UV decoration process. Raman spectroscopy showed a minor rearrangement in the structure of the Zn-MOF-74 crystal surface after NP decoration. X-ray photoelectron spectroscopy confirmed the metal oxidation states of Zn and NPs. High-resolution transmission electron microscopy images proved the surface decoration of Zn-MOF-74 crystals with spherical metallic NPs with diameters between 2.4 and 9.8 nm.

Fabrication of nanofibrous membranes decorated with metal-organic frameworks for detection of pollutants in water

The environmental pollution caused by antibiotics, Fe3+ and MnO4- pollutants is becoming increasingly serious. Polyacrylonitrile (PAN) and polymethyl methacrylate (PMMA) were used and decorated with metal-organic frameworks (MOFs) to fabricated three kinds of nanofibrous membranes (NFMs) with different shapes and sizes were prepared by electrospinning technology using in situ growth method and mixed spinning method. The structures and properties of the above three kinds of NFMs were characterized. Among them, PAN@Co/Mn-MOF-74 NFM prepared by in-situ growth method based on PAN was a kind of nano-fluorescent NFM sensor with uniform structure and good fluorescence performance. It showed unique specificity and excellent sensitivity in the detection of ORN, Fe3+ and MnO4-. Compared with previously reported functionalized MOFs, PAN@Co/Mn-MOF-74 NFM has a lower limit of detection (LOD). This study provides a feasible technical route for the preparation of nano-fluorescent NFMs and the targeted detection of trace metal ions and antibiotics.

Bimetallic MOF-Based Sensor for Highly Sensitive Detection of Ammonia Gases

The demand for the detection of ultralow concentrations of ammonia gas is growing. A bimetallic metal-organic framework (MOF) comprising Prussian blue analogs (PBAs) was used to achieve highly sensitive and stable detection of ammonia gas at room temperature in this study. First, PB was enriched by using ammonia for improved gas sensing properties. Second, a sensitive membrane with more vacancies was formed by partially replacing Fe3+ with Cu2+ through a cation-exchange strategy. Finally, a capacitive sensor was developed for ultralow-concentration ammonia detection using a Cu-Fe PBA sensitive membrane and interdigitated electrodes (IDEs). To investigate the adsorption efficiency of the designed composite sensitive film for ammonia, PBAs nanoparticles were deposited on a quartz microcrystal balance (QCM) via cyclic voltammetry and a hydrothermal method. Approximately 10 ppm of ammonia was adsorbed under 1 atm by the Cu-Fe PBA film prepared using a reaction time of 36 h, and the adsorption efficiency was measured to be 2.2 mmol g-1 using the QCM frequency response. The Cu-Fe PBAs were also tested using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Brunauer-Emmett-Teller theory. The introduction of Cu2+ ions significantly increased the specific surface area of Cu-Fe PBAs MOF, and the number of adsorption sites for ammonia also increased; however, its skeleton structure remained similar to that of PB. Then, the capacitive sensor based on Cu-Fe PBA sensitive membrane and IDE was fabricated and the gas sensing detection device was established for ammonia detection. Overall, the developed capacitive sensor exhibits a linear response of 75-1000 ppb and a detection limit of 3.8 ppb for ultralow ammonia concentrations, which makes it superior to traditional detection methods and thus allows excellent application prospects.

Dual-Targeted Metal Ion Network Hydrogel Scaffold for Promoting the Integrated Repair of Tendon-Bone Interfaces

The tendon-bone interface has a complex gradient structure vital for stress transmission and pressure buffering during movement. However, injury to the gradient tissue, especially the tendon and cartilage components, often hinders the complete restoration of the original structure. Here, a metal ion network hydrogel scaffold, with the capability of targeting multitissue, was constructed through the photopolymerization of the LHERHLNNN peptide-modified zeolitic imidazolate framework-8 (LZIF-8) and the WYRGRL peptide-modified magnesium metal-organic framework (WMg-MOF) within the hydrogel scaffold, which could facilitate the directional migration of metal ions to form a dynamic gradient, thereby achieving integrated regeneration of gradient tissues. LZIF-8 selectively migrated to the tendon, releasing zinc ions to enhance collagen secretion and promoting tendon repair. Simultaneously, WMg-MOF migrated to cartilage, releasing magnesium ions to induce cell differentiation and facilitating cartilage regeneration. Infrared spectroscopy confirmed successful peptide modification of nano ZIF-8 and Mg-MOF. Fluorescence imaging validated that LZIF-8/WMg-MOF had a longer retention, indirectly confirming their successful targeting of the tendon-bone interface. In summary, this dual-targeted metal ion network hydrogel scaffold has the potential to facilitate synchronized multitissue regeneration at the compromised tendon-bone interface, offering favorable prospects for its application in the integrated reconstruction characterized by the gradient structure.

Recent advances in surface-mounted metal-organic framework thin film coatings for biomaterials and medical applications: a review

Coatings of metal-organic frameworks (MOFs) have potential applications in surface modification for medical implants, tissue engineering, and drug delivery systems. Therefore, developing an applicable method for surface-mounted MOF engineering to fabricate protective coating for implant tissue engineering is a crucial issue. Besides, the coating process was desgined for drug infusion and effect opposing chemical and mechanical resistance. In the present review, we discuss the techniques of MOF coatings for medical application in both in vitro and in vivo in various systems such as in situ growth of MOFs, dip coating of MOFs, spin coating of MOFs, Layer-by-layer methods, spray coating of MOFs, gas phase deposition of MOFs, electrochemical deposition of MOFs. The current study investigates the modification in the implant surface to change the properties of the alloy surface by MOF to improve properties such as reduction of the biofilm adhesion, prevention of infection, improvement of drugs and ions rate release, and corrosion resistance. MOF coatings on the surface of alloys can be considered as an opportunity or a restriction. The presence of MOF coatings in the outer layer of alloys would significantly demonstrate the biological, chemical and mechanical effects. Additionally, the impact of MOF properties and specific interactions with the surface of alloys on the anti-microbial resistance, anti-corrosion, and self-healing of MOF coatings are reported. Thus, the importance of multifunctional methods to improve the adhesion of alloy surfaces, microbial and corrosion resistance and prospects are summarized.

Sorption-Induced Fiber Optic Plasmonic Gas Sensing via Small Grazing Angle of Incidence

Sensing technologies based on plasmonic nanomaterials are of interest for various chemical, biological, environmental, and medical applications. In this work, an incorporation strategy of colloidal plasmonic nanoparticles (pNPs) in microporous polymer for realizing distinct sorption-induced plasmonic sensing is reported. This approach is demonstrated by introducing tin-doped indium oxide pNPs into a polymer of intrinsic microporosity (PIM-1). The composite film (pNPs-polymer) provides distinct and tunable optical features on the fiber optic (FO) platform that can be used as a signal transducer for gas sensing (e.g., CO2 ) under atmospheric conditions. The resulting pNPs-polymer composite demonstrates high sensitivity response on FO in the evanescent field configuration, provided by the dramatic response of modes above the total-internal-reflection angle. Furthermore, by varying the pNPs content in the polymer matrix, the optical behavior of the pNPs-polymer composite film can be tuned to affect the operational wavelength by over several hundred nanometers and the sensitivity of the sensor in the near-infrared range. It is also shown that the pNPs-polymer composite film exhibits remarkable stability over a period of more than 10 months by mitigating the physical aging issue of the polymer.

Ligand as Buffer for Improving Chemical Stability of Coordination Polymers

Chemical stability is one of the key concerns in coordination polymers (CPs). However, technologies to protect CPs against acidic or alkaline aqueous environments have yet to be implemented. Herein we demonstrate an approach for improving the pH stability by utilizing the ligand salt as buffering site to modify the unsaturated coordination sites of CPs. For the selective one-dimensional CP Eu-d-DBTA (d-H₂DBTA = d-O,O'-dibenzoyltartaric acid) with a pH stability range of 6-8, the introduction of the ligand salt Na-d-DBTA extends the pH stability interval from 3 to 11. Crystallographic structure data reveal the formation of a Eu/Na-d-DBTA dynamic structure with Na-d-DBTA buffer sites on the Eu-O cluster of the Eu-d-DBTA skeleton. Benefiting from the dynamic single-crystal-to-single-crystal transformation, the buffer sites protect the skeleton from the impact of the acidic or alkaline aqueous environment. In addition, Eu/Na-d-DBTA produces stable photoluminescence properties and selective responses toward l-tryptophan (l-Trp) and further toward l-lysine (l-Lys) over the whole buffer capacity range of 3-11. Noticeably, other Ln/Na-d-DBTA CPs and star metal-organic frameworks also exhibit pH stability improvement when the ligand-as-buffer technology is used, which is significant for developing advanced inorganic-organic hybrid materials with superior functionality.

Recent Progress of Metal-Organic Frameworks and Metal-Organic Frameworks-Based Heterostructures as Photocatalysts

In the field of photocatalysis, metal-organic frameworks (MOFs) have drawn a lot of attention. MOFs have a number of advantages over conventional semiconductors, including high specific surface area, large number of active sites, and an easily tunable porous structure. In this perspective review, different synthesis methods used to prepare MOFs and MOFs-based heterostructures have been discussed. Apart from this, the application of MOFs and MOFs-based heterostructures as photocatalysts for photocatalytic degradation of different types of pollutants have been compiled. This paper also highlights the different strategies that have been developed to modify and regulate pristine MOFs for improved photocatalytic performance. The MOFs modifications may result in better visible light absorption, effective photo-generated charge carriers (e-/h+), separation and transfer as well as improved recyclability. Despite that, there are still many obstacles and challenges that need to be addressed. In order to meet the requirements of using MOFs and MOFs-based heterostructures in photocatalysis for low-cost practical applications, future development and prospects have also been discussed.

Vapor-Phase Adsorption of Xylene Isomers and Ethylbenzene in MOF-74 Thin Films

Thin films of Co-MOF-74 and Ni-MOF-74 were synthesized on Au-coated quartz crystal microbalance substrates by a vapor-assisted conversion (VAC) method that precludes the need for activation via postsynthetic solvent exchange. All thin films were structurally characterized by powder X-ray diffraction, reflection-absorption infrared spectroscopy, and Raman spectroscopy. Scanning electron microscopy (SEM) images reveal that the Ni-MOF-74 films exists as a dense base layer with hemispherical protrusions on the surface. In contrast, the scanning electron microscopy images of the Co-MOF-74 thin films show a rough surface with spherical deposits. The thin film morphologies were different than the powders resulting from the bulk synthesis. Gravimetric vapor-phase adsorption measurements for xylene isomers and ethylbenzene within Co-MOF-74 and Ni-MOF-74 thin films were conducted, and the results were compared with those reported for the corresponding bulk powders. Despite different morphologies, the saturation capacities of Ni-MOF-74 and Co-MOF-74 thin films were found to be nearly equivalent to those reported for the bulk powders. The results demonstrate that the VAC method can produce MOF-74 thin films that retain the intrinsic properties that are observed in bulk powders.

Non-injective gas sensor arrays: identifying undetectable composition changes

Metal-organic frameworks (MOFs) are nanoporous materials with good prospects as recognition elements for gas sensors owing to their adsorptive sensitivity and selectivity. A gravimetric, MOF-based sensor functions by measuring the mass of gas adsorbed in a MOF. Changes in the gas composition are expected to produce detectable changes in the mass of gas adsorbed in the MOF. In practical settings, multiple components of the gas adsorb into the MOF and contribute to the sensor response. As a result, there are typically many distinct gas compositions that produce the same single-sensor response. The response vector of a gas sensor array places multiple constraints on the gas composition. Still, if the number of degrees of freedom in the gas composition is greater than the number of MOFs in the sensor array, the map from gas compositions to response vectors will be non-injective (many-to-one). Here, we outline a mathematical method to determine undetectable changes in gas composition to which non-injective gas sensor arrays are unresponsive. This is important for understanding their limitations and vulnerabilities. We focus on gravimetric, MOF-based gas sensor arrays. Our method relies on a mixed-gas adsorption model in the MOFs comprising the sensor array, which gives the mass of gas adsorbed in each MOF as a function of the gas composition. The singular value decomposition of the Jacobian matrix of the adsorption model uncovers (i) the unresponsive directions and (ii) the responsive directions, ranked by sensitivity, in gas composition space. We illustrate the identification of unresponsive subspaces and ranked responsive directions for gas sensor arrays based on Co-MOF-74 and HKUST-1 aimed at quantitative sensing of CH₄/N₂/CO₂/C₂H₆mixtures relevant to natural gas sensing.