Asymmetric, Flexible Supercapacitor Based on Fe-Co Alloy@Sulfide with High Energy and Power Density

Designing 3D SnS@Cu-Ni Nanoporous Column Array Electrode for High-Capacity and High-Rate Lithium-Ion Batteries

Sn-based materials with high capacity showcase great potential for next-generation lithium-ion batteries (LIBs). Yet, the large volume change and limited ion/electron transfer efficiency of Sn-based materials upon operation significantly compromises the battery performance. In this study, a unique 3D copper-nickel nanoporous column array current collector is rationally developed via a facile template-free galvanostatic electrodeposition method, followed by electrodepositing SnS active material onto it (denoted as 3D SnS@CNCA). Excitingly, the morphology of the 3D SnS@CNCA electrode perfectly inherited the nanoporous column array structure of the 3D current collector, which not only endows the electrode with a large specific surface area to provide more active sites and sufficient ion/electron transport pathways, but also effectively alleviates the volume expansion of SnS upon repeated charge-discharge cycles. Therefore, the binder-free 3D SnS@CNCA electrode showcases a significantly enhanced Li storage performance, showing a high initial reversible capacity of 1019.7 mAh g-1 with noteworthy cycling stability (a capacity retention rate of 89.4% after 200 cycles). Moreover, the designed electrode also manifests high rate performance with a high capacity of 570.6 mAh g-1 at 4 A g-1. This work provides a novel design idea for the preparation of high-performance electrodes beyond LIBs.

Ni0.5Co0.5S nano-chains: a high-performing intercalating pseudocapacitive electrode in asymmetric supercapacitor (ASC) mode for the development of large-scale energy storage devices

Grid-scale energy storage solutions are necessary for using renewable energy sources efficiently. A supercapattery (supercapacitor + battery) has recently been introduced as a new variety of hybrid devices that engage both capacitive and faradaic charge storage processes. Nano-chain architectures of Ni0.5Co0.5S electrode materials consisting of interconnected nano-spheres are rationally constructed by tailoring the surface structure. Nano-chains of the bimetallic sulfide Ni0.5Co0.5S are presented to have a superior charge storage capacity. The Ni0.5Co0.5S nano-chain electrode presents a capacitance of 2001.6 F g-1 at 1 mV s-1, with a specific capacity of 267 mA h g-1 (1920 F g-1) at 1 A g-1 in 4 M KOH aqueous electrolyte through the galvanostatic charge-discharge (GCD) method. The reason behind the high charge storage capacity of the materials is the predominant redox-mediated diffusion-controlled pseudocapacitive mechanism coupled with surface capacitance (electrosorption), as the surface (outer) and intercalative (inner) charges stored by the Ni0.5Co0.5S electrodes are close to 46.0% and 54.0%, respectively. Additionally, a Ni0.5Co0.5S//AC two electrode full cell operating in asymmetric supercapacitor cell (ASCs) mode in 4 M KOH electrolyte exhibits an impressive energy density equivalent to 257 W h kg-1 and a power density of 0.73 kW kg-1 at a current rate of 1 A g-1.

Green Synthesis of NiFe2O4 Nano-Spinel Oxide-Decorated Carbon Nanotubes for Efficient Capacitive Performance-Effect of Electrolyte Concentration

Energy storage applications received great attention due to environmental aspects. A green method was used to prepare a composite of nickel-iron-based spinel oxide nanoparticle@CNT. The prepared materials were characterized by different analytical methods like X-ray diffraction, X-ray photon spectroscopy (XPS), scanning electron microscopy (SEM), and transmitted electron microscopy (TEM). The synergistic effect between nickel-iron oxide and carbon nanotubes was characterized using different electrochemical methods like cyclic voltammetry (CV), galvanostatic charging/discharging (GCD), and electrochemical impedance spectroscopy (EIS). The capacitances of the pristine NiFe2O4 and NiFe2O4@CNT were studied in different electrolyte concentrations. The effect of OH- concentrations was studied for modified and non-modified surfaces. Furthermore, the specific capacitance was estimated for pristine and modified NiFe2O4 at a wide current range (5 to 17 A g-1). Thus, the durability of different surfaces after 2000 cycles was studied, and the capacitance retention was estimated as 78.8 and 90.1% for pristine and modified NiFe2O4. On the other hand, the capacitance rate capability was observed as 65.1% (5 to 17 A g-1) and 62.4% (5 to 17 A g-1) for NiFe2O4 and NiFe2O4@CNT electrodes.

Bismuth oxyformate microspheres assembled by ultrathin nanosheets as an efficient negative material for aqueous alkali battery

A negative electrode with high capacity and rate capability is essential to match the capacity of a positive electrode and maximize the overall charge storage performance of an aqueous alkali battery (AAB). Due to the 3-electron redox reactions within a wide negative potential range, bismuth (Bi)-based compounds are recognized as efficient negative electrode materials. Herein, hierarchically structured bismuth oxyformate (BiOCOOH) assembled by ultrathin nanosheets was prepared by a solvothermal reaction for application as negative material for AAB. Given the efficient ion diffusion channels and sufficient exposure of the inner surface area, as well as the pronounced 3-electron redox activity of Bi species, the BiOCOOH electrode offered a high specific capacity (C_s, 229 ± 4 mAh g^-1 at 1 A g^-1) and superior rate capability (198 ± 6 mAh g^-1 at 10 A g^-1) within 0 ∼ -1 V. When pairing with the Ni₃S₂-MoS₂ battery electrode, the AAB delivered a high energy density (E_cell, 217 mWh cm^-2 at a power density (P_cell) of 661 mW cm^-2), showing the potential of such a novel BiOCOOH negative material in battery-type charge storage.

NiO/Ni Nanowafer Aerogel Electrodes for High Performance Supercapacitors

Transition metal oxide aerogels are a fascinating class of compounds that have received considerable attention in the last decade owing to their unique and exceptional properties, including high porosity, large surface area, and ultralow density. In this study, α-Ni(OH)₂ aerogels and annealed NiO/Ni aerogels were used to design and fabricate a two-electrode supercapacitor device. The physicochemical properties of the as-synthesized aerogels were characterized through X-ray diffraction, scanning electron microscopy, transmission electron microscopy, the Brunauer-Emmett-Teller theory, and X-ray photoelectron spectroscopy studies. The annealed NiO/Ni aerogels showed a (specific capacitance of 1060 F/g) specific capacity of 422 C/g at 1 A/g current density and with good cycling stability (up to 10,000 cycles). The supercapacitor also demonstrated an energy density of 32.4 Wh/kg and power density of 1800 W/kg at a current density of 2 A/g. The specific capacitance of NiO/Ni aerogels was more than twice that of the α-Ni(OH)₂ aerogels. The practical applications of the aerogel were demonstrated by fabricating a two-electrode device.

Rational La-doped hematite as an anode and hydrous cobalt phosphate as a battery-type electrode for a hybrid supercapacitor

In recent years, modern appliances require high energy density with a burst power supply. Hybrid supercapacitors show high performance based on high energy density without compromising power density and stability over thousands of charge-discharge cycles. In this work, the optimized hybrid electrodes using lanthanum-doped hematite (lanthanum-doped iron oxide) noted as 7.5%La-HMT as a negative electrode and hydrous cobalt phosphate (CoPO) as a battery-type positive electrode have been successfully fabricated via a simple hydrothermal method and a facile co-precipitation method, respectively. The 7.5%La-HMT showed excellent electrochemical performance due to doping of rare-earth La³⁺ metal ions, resulting in improvised active sites and reduction in the equivalent resistance. The 7.5%La-HMT operated at a high potential window (0 to -1.2 V) with an ultra-high specific capacitance (S_p) of 1226.7 F g^-1 at 1 A g^-1 with capacitance retention of 89.3% over 1000 cycles. CoPO could be operated at a high working window (0 to 0.45 V) with a specific capacity of 121.7 mA h g^-1 at a current density of 2 A g^-1 with capacitance retention of 85.4% over 1000 cycles. The configured CoPO//KOH//10%La-HMT aqueous hybrid capacitor device (Aq-HSC) could be operated at a potential window of 1.6 V and delivered a maximum energy density (E.D) of 83.6 W h kg^-1 at a power density (P.D) of 3.2 kW kg^-1 with S_p of 235.0 F g^-1 at 2 A g^-1 and 89.0% S_p retention over 5000 cycles. The simplicity of the synthesis methods for CoPO and 7.5%La-HMT along with their superior super-capacitive properties make them suitable for advanced electrical devices and hybrid vehicles.

Photoirradiation-Induced Capacitance Enhancement in the h-WO3/Bi2WO6 Submicron Rod Heterostructure under Simulated Solar Illumination and Its Postillumination Capacitance Enhancement Retainment from a Photocatalytic Memory Effect

Recently, photoassisted charging has been demonstrated as a green and sustainable approach to successfully enhance the capacitance of supercapacitors with low cost and good efficiency. However, their light-induced capacitance enhancement is relatively low and is lost quickly when the illumination is off. In this work, a novel active material system is developed for supercapacitors with the photoassisted charging capability by the decoration of a small amount of Bi₂WO₆ nanoparticles on an h-WO₃ submicron rod surface in situ, which forms a typical type II band alignment heterostructure with a close contact interface through the co-sharing of W atoms between h-WO₃ submicron rods and Bi₂WO₆ nanoparticles. The photogenerated charge carrier separation and transfer are largely enhanced in the h-WO₃/Bi₂WO₆ submicron rod electrode, which subsequently allows more charge carriers to participate in its photoassisted charging process to largely enhance its capacitance improvement under simulated solar illumination than that of the h-WO₃ submicron rod electrode. Furthermore, the h-WO₃/Bi₂WO₆ submicron rod electrode could retain its photoinduced capacitance enhancement in the dark for an extended period of time from the photocatalytic memory effect. Thus, our work provides a solution to the two major drawbacks of reported supercapacitors with the light-induced capacitance enhancement property, and supercapacitors based on active materials with the photocatalytic memory effect could be utilized in various technical fields.