Molybdenum Selenide/Porous Carbon Nanomaterial Heterostructures with Remarkably Enhanced Light-Boosting Peroxidase-like Activities

Enhanced Photothermal-Assisted Hydrogen Production via a Porous Carbon@MoS2/ZnIn2S4 Type II-S-Scheme Tandem Heterostructure

MoS2/ZnIn2S4 flower-like heterostructures into porous carbon (PC@MoS2/ZIS) are embedded. This ternary heterostructure demonstrates enhanced light absorption across a broad spectral range from 200 to 2500 nm. It features both Type-II and S-scheme dual heterojunction interfaces, which facilitate the generation, separation, and transfer of photoinduced carriers. The PC enveloped by MoS2/ZIS composite microspheres serves as a photothermal source, providing additional energy to the carriers. This process accelerates charge separation and migration, enhancing photothermal-assisted photocatalytic H2 evolution. The optimal H2 evolution rate for PC@MoS2/ZIS reaches an impressive 18.79 mmol g-1 h-1, with an apparent quantum efficiency of 14.1% at 400 nm. This work presents a promising approach for effectively integrating multicomponent heterostructures with photothermal effects, offering innovative strategies for efficient solar energy utilization and conversion.

Dual-mode optical biocompatible-sensor enabled by enzyme-like activity of UiO-66 (Zr) for ultra-sensitive ROS detection in vitro

The simple, effective and highly sensitive detection of hydrogen peroxide (H2O2), which belongs to the reactive oxygen species (ROS), at low concentrations plays an indispensable role in the field of environmental protection, biological research and safety. In this study, a dual-mode optical biosensor, UiO-66@OPD, was developed based on the inherent peroxidase mimicking activity of UiO-66 (Zr) and the optical reaction of ortho-phenylenediamine (OPD) by extending the π-system through oxidative coupling, prototropism and elimination to form OPDox, thereby exhibiting strong orangish absorbance and greenish fluorescence. The catalase-mimicking activity of UiO-66 (Zr) was demonstrated by the catalytic oxidation of methylene blue in the presence of H2O2. Moreover, the Michaelis-Menten kinetic model confirmed the intrinsic peroxidase-like activity of UiO-66@OPD as a modified MOFzyme. The synthesized UiO-66 (Zr) facilitated the oxidation of OPD to OPDox by degrading H2O2 to the hydroxyl radicals. During the oxidation process, the absorption peak at 415 nm and the fluorescence peak at 565 nm of the synthesized probe were significantly enhanced by increasing the H2O2 concentration. Moreover, a colorimetric and fluorometric ultrasensitive sensor shows a good linear relationship between the intensity enhancement and H2O2 concentration in the range of 0-600 nM for absorption and fluorescence spectra with R2 = 0.9772, and R2 = 0.9948, respectively. To demonstrate the biological performance and biocompatibility of UiO-66@OPD as a biosensor, MTT evaluation was performed for the three cell lines MCF-10 A, HEK293 and A549, indicating high biocompatibility and good cell viability for biological applications. Ultimately, this convenient, environmentally friendly, biocompatible and cost-effective catalase-mimicking-based sensor system will open a new perspective for the development of portable kite-based biosensors In vitro.

Synthesis and characterization of MoSe2 nanoscrolls via pulsed laser ablation in deep eutectic solvents

There is ongoing interest in the rapid, reproducible production of 2-dimensional (2-D) transition metal dichalcogenides (TMD), such as molybdenum-based TMD (MoX2), where X is a chalcogen atom such as sulphur (S), selenium (Se) or tellurium (Te), driven by their unique optical and electronic properties. Once fabricated into an atomically thin layer structure, these materials have a direct-indirect bandgap transition, strong spin-orbit coupling, and favourable electronic and mechanical strain-dependent properties which are attractive for electronics. Pulsed laser ablation in liquid (PLAL) is an economic, green alternative for synthesis of TMD. It has been shown that in the case of MoX2, the chemical processes during the plasma phase of the ablation can yield the formation of multispecies, including MoOx quantum dots when oxygen-containing solvents are used. Here, we introduce the formation of MoSe2 nanoscrolls with low oxygen content synthesized via pulsed laser ablation in deep eutectic solvents (PLADES). Our results suggest that the synthesis produces a stable colloidal solution of large 2-D structures with tuneable surface charge by replacing the deep eutectic solvent (DES) with DI water. Nuclear Magnetic Resonance (NMR) results suggest that irradiating the solvent at near infrared NIR energy does not affect its chemical composition. NMR also proves that serial washing can completely remove solvent from the nanostructures. Raman shifts suggest the formation of large, thin MoSe2 nanosheets aided by the solvent confinement resulting from van der Waal forces and hydrogen bonds interactions between MoSe2 and urea. Binding energies measured by X-ray photoelectron spectroscopy (XPS) confirm MoSe2-DES preference to form 1T-MoSe2versus molybdenum oxides and 2H MoSe2 in DI-water. Raman and XPS findings were validated by transmission electron microscopy (TEM) and selected area electron diffraction (SAED). Results of this work validate the use of PLADES for the synthesis of stable, crystalline, low-surface-oxygen-content colloidal MoSe2 nanoscrolls in scalable quantities.

Manganese self-boosting hollow nanoenzymes with glutathione depletion for synergistic cancer chemo-chemodynamic therapy

Chemodynamic therapy (CDT) has outstanding potential as a combination therapy to treat cancer. However, the effectiveness of CDT in the treatment of solid tumors is limited by the overexpression of glutathione (GSH) in the tumor microenvironment (TME). GSH overexpression diminishes oxidative stress and attenuates chemotherapeutic drug-induced apoptosis in cancer cells. To counter these effects, a synergistic CDT/chemotherapy cancer treatment, involving the use of a multifunctional bioreactor of hollow manganese dioxide (HMnO2) loaded with cisplatin (CDDP), was developed. Metal nanoenzymes that can auto-degrade to produce Mn2+ exhibit Fenton-like, GSH-peroxidase-like activity, which effectively depletes GSH in the TME to attenuate the tumor antioxidant capacity. In an acidic environment, Mn2+ catalyzed the decomposition of intra-tumor H2O2 into highly toxic ·OH as a CDT. HMnO2 with large pores, pore volume, and surface area exhibited a high CDDP loading capacity (>0.6 g-1). Treatment with CDDP-loaded HMnO2 increased the intratumor Pt-DNA content, leading to the up-regulation of γ-H2Aχ and an increase in tumor tissue damage. The decreased GSH triggered by HMnO2 auto-degradation protected Mn2+-generated ·OH from scavenging to amplify oxidative stress and enhance the efficacy of CDT. The nanoenzymes with encapsulated chemotherapeutic agents deplete GSH and remodel the TME. Thus, tumor CDT/chemotherapy combination therapy is an effective therapeutic strategy.

N,N-dicarboxymethyl Perylene-diimide-modified CdV2O6 Nanorods for Colorimetric Sensing of H2O2 and Pyrogallol

The peroxidase-like activity of CdV₂O₆ nanorods has been considerably improved by modification with N, N-dicarboxymethyl perylene-diimide (PDI) as a photosensitizer. The peroxidase-like behaviors are evaluated by virtue of the colorless chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB), which is fast changed into blue oxTMB in the presence of H₂O₂ in only 90 s. PDI-CdV₂O₆ exhibits high stability at elevated temperatures and PDI-CdV₂O₆ retains more than 70% of its catalytic activity over a wide range of 15 to 60 °C. The catalytic mechanism of PDI-CdV₂O₆ is ascribed to the synergistic interaction between PDI and CdV₂O₆ and the generation of •O₂^- radicals. Based on the enhanced peroxidase-like activity of PDI-CdV₂O₆, a selective colorimetric sensor has been constructed for H₂O₂ and pyrogallol (PG) with detection limits of 36.5 μM and 0.179 μM, respectively. The feasibility of the proposed sensing platform has been validated by detecting H₂O₂ in milk and pyrogallol in tap water.