DNA Tetrahedron-Based MNAzyme for Sensitive Detection of microRNA with Elemental Tagging

Label-free detection of biomolecules using inductively coupled plasma mass spectrometry (ICP-MS)

Bioassays using inductively coupled plasma mass spectrometry (ICP-MS) have gained increasing attention because of the high sensitivity of ICP-MS and the various strategies of labeling biomolecules with detectable metal tags. The classic strategy to tag the target biomolecules is through direct antibody-antigen interaction and DNA hybridization, and requires the separation of the bound from the unbound tags. Label-free ICP-MS techniques for biomolecular assays do not require direct labeling: they generate detectable metal ions indirectly from specific biomolecular reactions, such as enzymatic cleavage. Here, we highlight the development of three main strategies of label-free ICP-MS assays for biomolecules: (1) enzymatic cleavage of metal-labeled substrates, (2) release of immobilized metal ions from the DNA backbone, and (3) nucleic acid amplification-assisted aggregation and release of metal tags to achieve amplified detection. We briefly describe the fundamental basis of these label-free ICP-MS assays and discuss the benefits and drawbacks of various designs. Future research is needed to reduce non-specific adsorption and minimize background and interference. Analytical innovations are also required to confront challenges faced by in vivo applications.

Self-assembly of a AuNPs/Ti3C2 MXene hydrogel for cascade amplification of microRNA-122 biosensing

A three-dimensional (3D) self-assembled AuNPs/Ti3C2 MXene hydrogel (AuNPs/Ti3C2 MXH) nanocomposite was prepared for the fabrication of a novel microRNA-122 electrochemical biosensor. The 3D hydrogel structure was gelated from two-dimensional MXene nanosheets with the assistance of graphite oxide and ethylenediamine. MXene hydrogels supported the in situ formation of Au nanoparticles (AuNPs) that predominantly exploring the (111) facet, and these AuNPs are utilized as carriers for hairpin DNA (hpDNA) probes, facilitating DNA hybridization. MXene acted as both a reductant and stabilizer, significantly improving the electrochemical signal. In addition, the conjugation of PAMAM dendrimer-encapsulated AuNPs and H-DNA worked as an ideal bridge to connect targets and efficient electrochemical tags, providing a high amplification efficiency for the sensing of microRNA-122. A linear relationship between the peak currents and the logarithm of the concentrations of microRNA-122 from 1.0 × 10-2 to 1.0 × 102 fM (I = 1.642 + 0.312 lgc, R2 = 0.9891), is obtained. The detection limit is  0.8 × 10-2 fM (S/N = 3). The average recovery for human serum detection ranged from 97.32 to 101.4% (RSD < 5%).

Simultaneous detection of dual microRNAs related to EV71 using ICP-MS based on metal nanoparticle labeling with hybridization chain reaction

BACKGROUND

Hand, foot, and mouth (HMFD) disease caused by enterovirus 71 (EV 71), is closely associated with severe clinical manifestations and can be deadly. Early detection of EV 71 can be achieved by detecting the increment in miR296 and miR16 in the serum. Using HCR to amplify signals and convert biological signals into metal nanoparticle signals detectable by ICP-MS is a detection method that can collect more accurate and reliable information, compared with traditional methods, in the detection of biological samples.

RESULTS

We described a strategy for the simultaneous detection of miR296 and miR16 by ICP-MS based on metal nanoparticles (NPs) labeling with HCR. Briefly, single-stranded DNA (ssDNA) and magnetic beads (MBs), as well as NPs and signal probes for miRNA (Sp-miR) were firstly conjugated via the streptavidin-biotin recognition system, constituting ssDNA-MBs and NPs-Sp-miR complex, respectively. The latter complex then hybridized with the former through HCR, generating the nanosensors for targets. Then, the targets were added and hybridized with ssDNA, and the HCR complex with NPs was released into the solution. Finally, the corresponding signals of the NPs were measured by ICP-MS. Results demonstrated that the developed method had good sensitivity and satisfactory selectivity and precision. Furthermore, when applied to biological samples with a complex matrix, the developed method also showed good recovery (88 % - 92 %) and reproducibility (RSD<10 %).

SIGNIFICANCE

This method contributes to the early diagnosis of HFMD and opens up ideas for the further development of high-throughput biomarker detection. The strategy has practical potential for miR296 and miR16 detection in biological samples and provides a promising tool for multiple miRNA detection.

Duplex-specific nuclease powered 3D DNA walker and quantum dots barcodes for homogeneous electrochemical detection of microRNAs

Multiplex microRNAs (miRNAs) detection is beneficial for early diagnosis and prognosis of cancer. Herein, duplex-specific nuclease (DSN) powered 3D DNA walker and quantum dots (QDs) barcodes were designed for the simultaneous detection of miRNAs in a homogeneous electrochemical sensor. In the proof-of-concept experiment, the effective active area of the as-prepared graphene aerogel-modified carbon paper (CP-GAs) electrode was ∼14.30 times larger than that of the traditional glassy carbon electrode (GCE), endowing the enhanced capability of loading more metal ions for ultrasensitive detection of miRNAs. In addition, DSN-powered target recycling and DNA walking strategy assured the sensitive detection of miRNAs. After the introduction of magnetic beads (MNs) and electrochemical double enrichment strategies, the integration of triple signal amplification methods yielded good detection results. Under optimal conditions, towards simultaneous detection of microRNA-21 (miR-21) and miRNA-155 (miR-155), a linear range of 10^-16-10^-7 M and a sensitivity of 10 aM (miR-21) and 2.18 aM (miR-155) were achieved, respectively. It was worth mentioning that the prepared sensor can detect miR-155 down to 0.17 aM, which was also extremely advantageous among the sensors reported so far. What's more, through verification, the prepared sensor had good selectivity and reproducibility, and exhibited good detection ability in complex serum environments, showing great potential in early clinical diagnosis and screening.

Programmable Nanostructures Based on Framework-DNA for Applications in Biosensing

DNA has been actively utilized as bricks to construct exquisite nanostructures due to their unparalleled programmability. Particularly, nanostructures based on framework DNA (F-DNA) with controllable size, tailorable functionality, and precise addressability hold excellent promise for molecular biology studies and versatile tools for biosensor applications. In this review, we provide an overview of the current development of F-DNA-enabled biosensors. Firstly, we summarize the design and working principle of F-DNA-based nanodevices. Then, recent advances in their use in different kinds of target sensing with effectiveness have been exhibited. Finally, we envision potential perspectives on the future opportunities and challenges of biosensing platforms.

DNA tetrahedron-based CRISPR bioassay for treble-self-amplified and multiplex HPV-DNA detection with elemental tagging

Sensitive quantification of multiple analytes of interest is of great significance for clinical diagnosis. CRISPR Cas platforms offer a strategy for improving the specificity, sensitivity, and speed of nucleic acid-based diagnostics, while their multiplex analysis capability is still limited and challenging. Herein, we develop a novel DNA Tetrahedron (DTN)-supported biosensor based on the spatially separated CRISPR Cas self-amplification strategy and multiple-metal-nanoparticle tagging coupled with inductively coupled plasma mass spectrometry (ICP-MS) detection to improve the sensitivity and feasibility of the platform for multiplex detection of HPV-DNA (HPV-16, HPV-18 and HPV-52). Given target DNA induces robust trans-cleavage activity of the Cas12a/crRNA duplex, and the surrounding corresponding single-stranded DNA (ssDNA) linker are cleaved into short fragments that are unable to bond metal-nanoparticle probes (¹⁹⁷Au, ¹⁰⁷Ag, ¹⁹⁵Pt) onto DTN modified magnetic beads probe (MBs-DTN), resulting in obvious ICP-MS signal change. Of note, compared with ssDNA functionalized MBs, a higher Signal-to-Noise Ratio was obtained by using MBs-DTN in our system, further amplifying the signal by regulating probes on the surface of MBs. As expected, the HPV-DNA could be detected with detection limits as low as 218 fM and be multiplexed assayed at one test with high accuracy and specificity by this proposed strategy. Furthermore, we demonstrated that the HPV-DNA in cervical swab samples could be detected, showing high consistency with DNA sequencing results. We believe that this work provides a promising option in designing CRISPR based multiplex detection system for high sensitivity, good specificity, and clinical molecular diagnostics.

A renewable platform based on the entropy-driven catalytic amplification and element labeling inductively coupled plasma mass spectrometry for microRNA analysis

The element labeling inductively coupled plasma mass spectrometry (ICP-MS) strategy has been increasingly applied to the bioanalysis for various bio-targets. Herein, a renewable analysis platform with element labeling ICP-MS was firstly proposed for microRNA (miRNA) analysis. The analysis platform was established on the magnetic bead (MB) with entropy-driven catalytic (EDC) amplification. When the EDC reaction was initiated by target miRNA, numerous strands labeled with Ho element were released from MBs, and ¹⁶⁵Ho in the supernatant detected by ICP-MS could reflect the amount of target miRNA. After detection, the platform was easily regenerated by adding strands to reassemble EDC complex on MBs. This MB platform could be used four times, and the limit of detection for miRNA-155 was 8.4 pmol L^-1. Moreover, the developed regeneration strategy based on EDC reaction can be easily expanded to other renewable analysis platforms, such as, the renewable platform involving EDC and rolling circle amplification technology. Overall, this work proposed a novel regenerated bioanalysis strategy to reduce the consumption of reagent and time for probe preparation, profiting the development of bioassay based on element labeling ICP-MS strategy.

Dual-amplified CRISPR-Cas12a bioassay for HIV-related nucleic acids

Nucleic acid amplification strategies have successfully dominated ultrasensitive bioassays, but they sometimes bring high time-consumption, multi-step operation, increased contamination risk, and mismatch-related inaccuracy. We proposed a nucleic acid amplification-free method called the AuNPs-tagging based CRISPR-Cas12a bioassay platform. The signal amplification was realized by integrating the self-amplification effect of CRISPR-Cas12a with the enhancement effect of the large number of detectable atoms inside each gold nanoparticle. The proposed method achieved a low LOD of 1.05 amol in 40 min for HIV-related DNA.