Polyphenol-Metal Ion Redox-Induced Gelation System for Constructing Plant Protein Adhesives with Excellent Fluidity and Cold-Pressing Adhesion

Develop a novel and multifunctional soy protein adhesive constructed by rosin acid emulsion and TiO2 organic-inorganic hybrid structure

Soy protein adhesives (SPI) exhibit broad prospects in substituting aldehyde-based resin due to the economic and environmental-friendly characteristics, but still face a challenge because of the dissatisfied bonding strength and terrible water resistance. Herein, prompted by organic-inorganic hierarchy, a multifunctional and novel soy protein adhesive (SPI-RAE-TiO2) consisting of rosin acid emulsion (RAE) and TiO2 nanoparticles (TiO2) were proposed. In comparison with original SPI, the dry and wet shear strengths of modified adhesive reached 2.01 and 1.21 MPa, respectively, which were increased by 130 % and 200 %. Furthermore, SPI-6RAE-0.5TiO2 was selected as the best proportion via the method of response surface methodology (RSM). What's more, SPI-6RAE-0.5TiO2 adhesive demonstrated prominent coating performance in both dry and wet surface conditions. Meanwhile, SPI-6RAE-0.5TiO2 adhesive possessed excellent mildew resistance and antibacterial ability with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), reflecting the antibacterial rates 97.71 % and 98.16 %, respectively. In addition, SPI-6RAE-0.5TiO2 adhesive also exhibited the outstanding green features such as the reduction of formaldehyde pollution and greenhouse effect through Life Cycle Assessment (LCA). Thus, this work provided a novel and functional approach to design multifunctional, superior-property and low-carbon footprint soy protein adhesive.

pH-regulated Tannic acid and soybean protein isolate adhesive for enhanced performance in plant-based meat analogues

A food adhesive comprising tannic acid (TA) and soybean protein isolate (SPI) was developed to establish a cohesive bond between soy protein gel and simulated fat. The impact of varying TA concentrations and pH levels on the adhesive's rheology, thermal stability, chemical structure, and tensile strength were investigated. Rheological results revealed a gradual decrease in adhesive viscosity with increasing TA content. Differential scanning calorimetry (DSC) and thermal gravimetric (TG) results indicated that the stability of the adhesive improved with higher TA concentrations, reaching its peak at 0.50% TA addition. The incorporation of TA resulted in the cross-linking of amino group in unfolded SPI molecules, forming a mesh structure. However, under alkaline conditions (pH 9), adhesive viscosity and stability increased compared to the original pH. This shift was due to the disruption of the SPI colloidal charge structure, an increase in the stretching of functional groups, further unfolding of the structure, and an enhanced binding of SPI to TA. Under the initial pH conditions, SPI reacted with TA's active site to form covalent crosslinked networks and hydrogen bonds. In alkaline condition, beyond hydrogen and ionic bonding, the catechol structure was oxidized, forming an ortho-quinone that crosslinked SPI and created a denser structure. Tensile strength measurements and freeze-thaw experiments revealed that the adhesive exhibited maximum tensile strength and optimal adhesion with 0.75% TA at pH 9, providing the best overall performance. This study provides a new formulation and approach for developing plant-based meat analogues adhesives.

Role of tea polyphenols in enhancing the performance, sustainability, and catalytic cleaning capability of membrane separation for water-soluble pollutant removal

Tea polyphenols (TPs), like green tea polyphenol (GTP) and black tea polyphenol (BTP), with phenolic hydroxyl structures, form coordination and hydrogen bonds, making them effective for bridging inorganic catalysts and membranes. Here, TPs were employed as interface agents for the preparation of TPs-modified needle-clustered NiCo-layered double hydroxide/graphene oxide membranes (NiCo-LDH-TPs/GO). The incorporation of porous guest material, NiCo-LDH-TPs, facilitated water channel expansion, enhancing membrane permeability and resulting in the development of high-performance, sustainable catalytic cleaning membranes. The introduction of TPs through coordination weakened the surface electronegativity of NiCo-LDH, promoting a uniform mixed dispersion with GO and facilitating membrane self-assembly. NiCo-LDH-GTP/GO-5 and NiCo-LDH-BTP/GO-5 membranes demonstrated permeances of 85.98 and 90.76 L m-2 h-1 bar-1, respectively, with rejections of 98.73% and 99.54% for methylene blue (MB). Notably, the NiCo-LDH-BTP/GO-5 membrane maintained a high rejection of 97.11% even after 18 cycles in the catalytic cleaning process. Furthermore, the modification of GTP and BTP enhanced MB degradation through PMS activation, resulting in a 0.33% and 0.35% increase in the reaction rate constants of NiCo-LDH, respectively, while reducing metal ion spillover. These findings highlighted the potential of TPs in enhancing the efficiency and sustainability of catalytic cleaning GO membranes for water purification and separation processes.

Soybean-Based Bio-Adhesives: Role of Diamine on the Adhesive Properties

One possible approach to achieving sustainable development in the materials sector is to produce polymers from plant oils (POs), which are renewable and environmentally beneficial. Polymers with a high concentration of functional groups can be used as cross-linking agents to enhance the properties of epoxidized POs (epoxidation of plant oil)-based polymers. In this work, a unique resin with novel properties and potential uses was produced by cross-linking epoxidized soybean oil (ESO) with branched and flexible polyamines by ring-opening and amidation polymerizations. This approach is straightforward and ecologically benign. After curing, melamine pentane diamine (MPD) polymer maintained its position as the strongest structural adhesive among the synthesized resins, with a bonding strength of almost 2000 kPa for stainless steel; irrespective of the temperature, stainless steel consistently outperforms melamine ethylene diamine-ESO resin in strength comparisons. At 100 °C, stainless steel has a lap shear strength of about 300 kPa, which is far higher than copper and aluminum; at 180 °C, this value increases by another 750 kPa. While MPD-ESO resin has a shear strength of 1996 kPa at 180 °C, melamine butane diamine-ESO resin has a shear strength of only 1220 kPa.

Highly stretchable, self-healable and adhesive, thermal responsive conductive hydrogel loading nanocellulose complex for a flexible sensor

Currently, with the widespread concerns of smart soft sensors in wearable electronics, human health detection and electronic skin, flexible conductive hydrogels have been extensively studied. However, it remains a great challenge to develop hydrogels that have both satisfactory mechanical performance with stretchable and compressible and high conductive. Herein, based on synergistic dynamic hydrogen and metal coordination bonds, polyvinyl alcohol (PVA)/poly (2-hydroxyethyl methacrylate) (PHEMA) hydrogels doped with polypyrrole decorated cellulose nanofibers (CNFs@PPy) are developed via free radical polymerization. The loading versatile CNFs@PPy highlighted the complex hydrogels super-stretchability (approximately 2600 % elongation) and excellent toughness (2.74 MJ/m3) properties to tensile deformation, strong compressive strength (1.96 MPa), fast temperature responsiveness and outstanding strain sensing capability (GF = 3.13). Moreover, the PHEMA/PVA/CNFs@PPy hydrogels possessed rapid self-healing and powerful adhesive abilities to various interfaces without extra assistance, as well as distinguished fatigue resistance performance. Such advantages make the nanocomposite hydrogel displayed high stability and repeatable to both pressure and strain in a wide range of deformations, enabling a promising candidate in the fields of motion monitoring and healthcare management.

Development of eco-friendly antifungal and antibacterial adhesive derived from modified cassava starch waste/polyvinyl alcohol containing green synthesized nano-silver

Environmentally friendly biopolymer-based wood adhesives are an inevitable trend of wood product development to replace the use of harmful formaldehyde-based adhesives. In this research, a new eco-friendly modified cassava starch waste-based adhesive via carboxymethylation (CMS), and blending with polyvinyl alcohol (PVA), tannic acid (TA) and green synthesized silver nanoparticles (AgNPs) was prepared. The effects of TA content on green synthesis of AgNPs (Ag-TA) and bio-adhesive nanocomposite properties were investigated. The use of 5 wt% TA for AgNPs synthesis (Ag-TA-5) resulted in a uniform particle size distribution. The plywood prepared with Ag-TA-5 provided the highest dry and wet shear strength at 1.95 ± 0.11 MPa and 1.38 ± 0.3 MPa, respectively. The water absorption and thickness swelling of this plywood remarkably decreased up to 10.99% and 6.79%, respectively. More importantly, the presence of Ag-TA in CMS/PVA adhesive successfully inhibited the invasion of mold and bacteria. Based on the cyclic delamination test, the adhesive bond durability of bio-adhesive containing Ag-TA-5 could meet the requirement of the AITC Test T110-2007 and was comparable to commercial adhesives. The added advantage of the prepared bio-adhesive was its synthesis from agro-waste products and possible economically viable production at industrial level.

Preparation and Characterization of Soybean Protein Adhesives Modified with an Environmental-Friendly Tannin-Based Resin

Soybean protein-based adhesives are limited in their application due to their poor wet bonding strength and poor water resistance. Herein, we prepared a novel, environmentally friendly soybean protein-based adhesive by adding tannin-based resin (TR) to improve the performance of water resistance and wet bonding strength. The active sites of TR reacted with the soybean protein and its functional groups and formed strong cross-linked network structures, which improved the cross-link density of the adhesives and then improved the water resistance. The residual rate increased to 81.06% when 20 wt%TR was added, and the water resistance bonding strength reached 1.07 MPa, which fully met the Chinese national requirements for plywood (Class II, ≥0.7 MPa). SEM observations were performed on the fracture surfaces of all modified SPI adhesives after curing. The modified adhesive has a denser and smooth cross-section. Based on the TG and DTG plots, the thermal stability performance of the TR-modified SPI adhesive was improved when TR was added. The total weight loss of the adhesive decreased from 65.13% to 58.87%. This study provides a method for preparing low-cost and high-performance, environmentally friendly adhesives.

Combined Catalysis: A Powerful Strategy for Engineering Multifunctional Sustainable Lignin-Based Materials

The production and engineering of sustainable materials through green chemistry will have a major role in our mission of transitioning to a more sustainable society. Here, combined catalysis, which is the integration of two or more catalytic cycles or activation modes, provides innovative chemical reactions and material properties efficiently, whereas the single catalytic cycle or activation mode alone fails in promoting a successful reaction. Polyphenolic lignin with its distinctive structural functions acts as an important template to create materials with versatile properties, such as being tough, antimicrobial, self-healing, adhesive, and environmentally adaptable. Sustainable lignin-based materials are generated by merging the catalytic cycle of the quinone-catechol redox reaction with free radical polymerization or oxidative decarboxylation reaction, which explores a wide range of metallic nanoparticles and metal ions as the catalysts. In this review, we present the recent work on engineering lignin-based multifunctional materials devised through combined catalysis. Despite the fruitful employment of this concept to material design and the fact that engineering has provided multifaceted materials able to solve a broad spectrum of challenges, we envision further exploration and expansion of this important concept in material science beyond the catalytic processes mentioned above. This could be accomplished by taking inspiration from organic synthesis where this concept has been successfully developed and implemented.

Dynamic reversible adhesives based on crosslinking network via Schiff base and Michael addition

It is of practical interest to obtain polymers with complex material properties in a simplified synthetic manner for a broader range of practical applications. In this work, we constructed a dynamic reversible adhesive based on branched polyamine (PA) and p-formylphenyl acrylate (FPA) by simultaneously performing Michael addition reaction and Schiff base reaction. Branched polyamines provide a large number of amino groups as reaction sites that can react with both carbon-carbon double bonds and aldehyde groups. This enables the branched polymeric adhesive system to have a large number of Schiff base bonds within it, an important property of Schiff base bonds is that they are dynamically reversible. This allows us to prepare adhesives with hyperbranched crosslinking networks and recycling properties, and we have verified that FPA-PA adhesives do not exhibit significant fatigue after multiple recycling through the gluing-destruction-gluing process. The resulting FPA-PA adhesives produce tough bonding on multi-substrates such as steel, aluminum, glass, PVC, PTFE, birch and moso bamboo, which exhibited by lap shear strength of 2.4 MPa, 1.7 MPa, 1.4 MPa, 1.3 MPa, 0.4 MPa, 1.6 MPa, and 1.8 MPa, respectively. The feasibility of the synthesis idea of simultaneous Michael addition reaction and Schiff base reaction was demonstrated, as well as the excellent performance and great application potential of FPA-PA adhesives to be recyclable on multi-substrates.

Conversion of soybean oil extraction wastes into high-performance wood adhesives based on mussel-inspired cation-π interactions

As a soybean oil extractive byproduct, high temperature defatted soy meal (HSM) presents great potential as a raw material for vegetable protein adhesives to replace aldehyde-based adhesives in the wood-based panel production. However, the application has been hindered by its poor cold-pressing adhesive performance. Herein, a novel HSM-based adhesive with excellent cold-pressing adhesion performance was developed based on mussel-inspired cation-π interactions. Highly reactive polyamidoamine-epichlorohydrin (PAE) and folic acid (FA) were added into an HSM-based adhesive to construct a dual-network system stabilized by strong cation-π interactions. The coacervate formed by PAE and FA served as an "internal adhesive" to bond HSM particles together, yielding high initial viscosity but easy sizing. As expected, the prepared adhesive exhibited an excellent cold-pressing bonding strength of 423 kPa, showing a 295% improvement compared to the soy protein (SP) adhesive. To improve the hot-pressing bonding strength of the adhesives, inorganic calcium carbonate (CaCO₃) particles were introduced into the adhesive system to build an organic-inorganic hybrid adhesive system. The wet shear strength of the SPAE-FA-CaCO₃ adhesive significantly improved from 0.63 MPa to 0.96 MPa, meeting the requirements for the practical application. This method provides a novel strategy to exploit high-performance vegetable protein-based wood adhesives.