Porous Carbon Nanofibers Derived from Silk Fibroin through Electrospinning as N-Doped Metal-Free Catalysts for Hydrogen Evolution Reaction in Acidic and Alkaline Solutions

Phase-engineered CoP-Co2P/coal-based carbon fibers composite as self-supporting electrocatalyst for efficient overall water splitting

The development of highly efficient electrocatalysts is critical to advancing overall water splitting (OWS). Herein, a self-supporting composite electrocatalyst based on CoP-Co2P/coal-based carbon fibers (CoP-Co2P/C-CFs) is successfully fabricated through phase-engineering. The formation mechanism of precursors is investigated, enabling precise modification of CoP and Co2P composite phases. This phase-engineering minimizes the Gibbs free energy of hydrogen adsorption, thereby enhancing OWS performance. In addition, the specific active sites involved in the OWS reaction are examined to confirm the effectiveness of phase modulation on CoP and Co2P. Furthermore, C-CFs derived from coal exhibit self-supporting properties as well as good acid and alkaline resistances, making them a promising potential candidate for OWS. A two-electrode cell assembled using CoP-Co2P/C-CFs exhibits a low voltage of 1.60 V at 10 mA cm-2 for OWS, superior to 1.64 V obtained using Pt/C//RuO2. This study not only presents a reliable strategy for obtaining phase-engineered cobalt phosphide catalysts but also outlines a novel approach for coal into high-value-added CFs. Consequently, it offers a new perspective for the development of self-supporting electrocatalysts for OWS.

Spatially Confined Electrosynthesis of Halogen-Poor and Carbonyl-Rich Graphene for Boosting Water Desalination and Water Splitting

Electrochemical in situ modification of graphene remains a challenge because of the pretty low concentration of radicals generated during the electroexfoliation process. The spatially confined electrosynthesis of halogen-poor and carbonyl-rich graphene (XCG, X═F, Cl, Br) is reported. It is found that the effective radical addition reaction between graphite/graphene and electro-generated radicals (halogen radical and carboxylic radical) is promoted by using X- and HCOO- as both intercalation ions and co-reactants, which assists the efficient formation of high crystalline XCG. The assembled XCG membrane exhibited high interception for NaCl, KCl, MgCl2, and K2SO4 due to the narrow interlayer space. Theoretical calculations revealed favorable water migration on surface of F atoms, thus grasping the high water permeation. Furthermore, the halogen and carboxyl functional groups afforded XCG highly efficient water splitting. The current work highlights the in situ modification of graphene during the electroexfoliation process and the subsequent applications in membrane science, molecular engineering, and other energy-related applications.

Bamboo fiber-derived carbon support for the immobilization of Pt nanoparticles to enhance hydrogen evolution reaction

Biomass-derived carbon, as an excellent support, has received extensive attention. In this work, carbon matrix obtained from bamboo fiber (BF) is served as a supporting material for the immobilization of platinum (Pt) nanoparticles, leading to a substantial improvement in the hydrogen evolution reaction (HER). This approach leverages the remarkable surface area, outstanding conductivity, and environmentally friendly characteristics of BF-derived carbon, facilitating the dispersion and stability of the Pt nanoparticles. The as-fabricated catalysts deliver an outstanding HER performance, with overpotentials of 14.6, 46.9, and 73.5 mV at current densities of 10, 50, and 100 mA cm-2 in acidic solution, respectively. Theoretical calculations reveal that the interaction between Pt and nitrogen atoms in the support material further enhances the electrocatalytic performance. This interaction strengthens the binding of Pt, leading to the improved stability and activity of the catalyst, which subsequently boosts the efficiency of the electrocatalytic process. These findings underscore the superior HER performance of the enhanced catalyst, highlighting the potential of sustainable, biomass-derived materials in advancing catalytic applications.

Advances in porous carbon materials for a sustainable future: A review

Developing clean and renewable energy sources is key to a sustainable future. For human society to progress sustainably, environmentally friendly energy conversion and storage technologies are critical. The use of nanostructured advanced functional materials heavily influences the functionality of these systems. Porous carbons are multifunctional materials boasting considerable industrial utility. They possess many remarkable physiochemical and mechanical characteristics which have garnered interest in various fields. In this review, the application of porous carbon materials in electrocatalysis (HER, OER, ORR, NARR, and CO2RR) and rechargeable batteries (LIBs, LiS batteries, NIBs, and KIBs) for renewable energy conversion and storage are discussed. The suitability of porous carbon materials for these applications is discussed, and some recent works are reviewed. Finally, a few viewpoints on developing porous carbons in electrocatalysis and rechargeable batteries are given. This review aims to generate interest in current and upcoming researchers in porous carbon application for a sustainable future.

Encapsulating Transition Metal Nanoparticles inside Carbon (TM@C) Chainmail Catalysts for Hydrogen Evolution Reactions: A Review

Green hydrogen energy from electrocatalytic hydrogen evolution reactions (HERs) has gained much attention for its advantages of low carbon, high efficiency, interconnected energy medium, safety, and controllability. Non-precious metals have emerged as a research hotspot for replacing precious metal catalysts due to low cost and abundant reserves. However, maintaining the stability of non-precious metals under harsh conditions (e.g., strongly acidic, alkaline environments) remains a significant challenge. By leveraging the curling properties of two-dimensional materials, a new class of catalysts, encapsulating transition metal nanoparticles inside carbon (TM@C) chainmail, has been successfully developed. This catalyst can effectively isolate the active metal from direct contact with harsh reaction media, thereby delaying catalyst deactivation. Furthermore, the electronic structure of the carbon layer can be regulated through the transfer of electrons, which stimulates its catalytic activity. This addresses the issue of the insufficient stability of traditional non-precious metal catalysts. This review commences with a synopsis of the synthetic advancement of the engineering of TM@C chainmail catalysts. Thereafter, a critical discussion ensues regarding the electrocatalytic performance of TM@C chainmail catalysts during hydrogen production. Ultimately, a comprehensive review of the conformational relationship between the structure of TM@C chainmail catalysts and HER activity is provided, offering substantial support for the large-scale application of hydrogen energy.

Catalytically Active Carbon for Oxygen Reduction Reaction in Energy Conversion: Recent Advances and Future Perspectives

The shortage and unevenness of fossil energy sources are affecting the development and progress of human civilization. The technology of efficiently converting material resources into energy for utilization and storage is attracting the attention of researchers. Environmentally friendly biomass materials are a treasure to drive the development of new-generation energy sources. Electrochemical theory is used to efficiently convert the chemical energy of chemical substances into electrical energy. In recent years, significant progress has been made in the development of green and economical electrocatalysts for oxygen reduction reaction (ORR). Although many reviews have been reported around the application of biomass-derived catalytically active carbon (CAC) catalysts in ORR, these reviews have only selected a single/partial topic (including synthesis and preparation of catalysts from different sources, structural optimization, or performance enhancement methods based on CAC catalysts, and application of biomass-derived CACs) for discussion. There is no review that systematically addresses the latest progress in the synthesis, performance enhancement, and applications related to biomass-derived CAC-based oxygen reduction electrocatalysts synchronously. This review fills the gap by providing a timely and comprehensive review and summary from the following sections: the exposition of the basic catalytic principles of ORR, the summary of the chemical composition and structural properties of various types of biomass, the analysis of traditional and the latest popular biomass-derived CAC synthesis methods and optimization strategies, and the summary of the practical applications of biomass-derived CAC-based oxidative reduction electrocatalysts. This review provides a comprehensive summary of the latest advances to provide research directions and design ideas for the development of catalyst synthesis/optimization and contributes to the industrialization of biomass-derived CAC electrocatalysis and electric energy storage.

Effect of synthesis conditions on the porous texture of activated carbons obtained from Tara Rubber by FeCl3 activation

This paper presents the results of an unique analysis of the influence of the mass ratio of activator FeCl3 to precursor and the temperature of the activation process on the formation of the porous structure of activated carbons obtained from Tara Rubber by FeCl3 activation. The study used the new numerical clustering based adsorption analysis method and the quenched solid density functional theory, taking into account, among other things, the heterogeneity of the analysed surface which is a new approach rarely used in the analysis of the porous structure of adsorbents. On the basis of the calculation results, it was concluded that the activated carbon with the most developed porous texture was obtained at a mass ratio (FeCl3:Tara Rubber) of 2, at an activation process temperature of 800 °C. This activated carbon is also characterised by the lowest degree of surface heterogeneity and at the same time, however, the widest range of micropores compared to activated carbons obtained at other mass ratios. The analyses carried out further demonstrated the valuable and complementary information obtained from the structure analysis methods and their high utility in practical applications, especially in the development of new industrial technologies for the production of adsorbents and the selection of optimal conditions for their production.

Silk fibroin-derived electrospun materials for biomedical applications: A review

Electrospinning is a versatile technique for fabricating polymeric fibers with diameters ranging from micro- to nanoscale, exhibiting multiple morphologies and arrangements. By combining silk fibroin (SF) with synthetic and/or natural polymers, electrospun materials with outstanding biological, chemical, electrical, physical, mechanical, and optical properties can be achieved, fulfilling the evolving biomedical demands. This review highlights the remarkable versatility of SF-derived electrospun materials, specifically focusing on their application in tissue regeneration (including cartilage, cornea, nerves, blood vessels, bones, and skin), disease treatment (such as cancer and diabetes), and the development of controlled drug delivery systems. Additionally, we explore the potential future trends in utilizing these nanofibrous materials for creating intelligent biomaterials, incorporating biosensors and wearable sensors for monitoring human health, and also discuss the bottlenecks for its widespread use. This comprehensive overview illuminates the significant impact and exciting prospects of SF-derived electrospun materials in advancing biomedical research and applications.

Construction of Ni2P-MoC/Coal-Based Carbon Fiber Self-Supporting Catalysts for Enhanced Hydrogen Evolution

Efficient and inexpensive electrocatalysts play an important role in the hydrogen evolution reaction (HER) of electrolytic water splitting. Herein, Ni2P-MoC/coal-based carbon fiber (Ni2P-MoC/C-CF) self-supporting catalysts were obtained by low-temperature phosphorization and high-temperature carbonization. The Mo source and oxidized coal were uniformly dispersed in the carbon support by electrospinning technology. A precursor of Ni was introduced by the impregnation method. The synergistic effect of MoC and Ni2P may reduce the strong hydrogen adsorption capacity of pure MoC and provide a fast hydrogen release process. In addition, the C-CFs prepared by electrospinning can not only prevent the agglomeration of MoC and Ni2P particles at a high temperature but also provide a self-supporting support for the catalyst. As a result, the catalytic performance of the HER was improved greatly, and a low overpotential of 112 mV at 10 mA cm-2 was exhibited stably by the Ni2P-MoC/C-CFs. This work not only converts coal into coal-based carbon materials but also provides a feasible pathway for the rational design of large-scale molded hydrogen electrocatalysts.

Mulberry Leaves (Morus Rubra)-Derived Blue-Emissive Carbon Dots Fed to Silkworms to Produce Augmented Silk Applicable for the Ratiometric Detection of Dopamine

Silk fibers (SF) reeled from silkworms are constituted by natural proteins, and their characteristic structural features render them applicable as materials for textiles and packaging. Modification of SF with functional materials can facilitate their applications in additional areas. In this work, the preparation of functional SF embedded with carbon dots (CD) is reported through the direct feeding of a CD-modified diet to silkworms. Fluorescent and mechanically robust SF are obtained from silkworms (Bombyx mori) that are fed on CDs synthesized from the Morus rubra variant of mulberry leaves (MB-CDs). MB-CDs are introduced to silkworms from the third instar by spraying them on the silkworm feed, the mulberry leaves. MB-CDs are synthesized hydrothermally without adding surface passivating agents and are observed to have a quantum yield of 22%. With sizes of ≈4 nm, MB-CDs exhibited blue fluorescence, and they can be used as efficient fluorophores to detect Dopamine (DA) up to the limit of 4.39 nM. The nanostructures and physical characteristics of SF weren't altered when the SF are infused with MB-CDs. Also, a novel DA sensing application based on fluorescence with the MB-CD incorporated SF is demonstrated.

Functional Carbon from Nature: Biomass-Derived Carbon Materials and the Recent Progress of Their Applications

Biomass is considered as a promising source to fabricate functional carbon materials for its sustainability, low cost, and high carbon content. Biomass-derived-carbon materials (BCMs) have been a thriving research field. Novel structures, diverse synthesis methods, and versatile applications of BCMs have been reported. However, there has been no recent review of the numerous studies of different aspects of BCMs-related research. Therefore, this paper presents a comprehensive review that summarizes the progress of BCMs related research. Herein, typical types of biomass used to prepare BCMs are introduced. Variable structures of BCMs are summarized as the performance and properties of BCMs are closely related to their structures. Representative synthesis strategies, including both their merits and drawbacks are reviewed comprehensively. Moreover, the influence of synthetic conditions on the structure of as-prepared carbon products is discussed, providing important information for the rational design of the fabrication process of BCMs. Recent progress in versatile applications of BCMs based on their morphologies and physicochemical properties is reported. Finally, the remaining challenges of BCMs, are highlighted. Overall, this review provides a valuable overview of current knowledge and recent progress of BCMs, and it outlines directions for future research development of BCMs.

Stimuli-responsive silk fibroin for on-demand drug delivery

Stimuli-responsive "smart" hydrogel biomaterials have attracted great attention in the biomedical field, especially in designing novel on-demand drug delivery systems. As a handful natural biomaterial approved by US Food and Drug Administration, silk fibroin (SF) has unique high temperature resistance as well as tunable structural composition. These properties make it one of the most ideal candidates for on-demand drug delivery. Meanwhile, recent advances in polymer modification and nanomaterials have fostered the development of various stimuli-responsive delivery systems. Here, we first review the recent advance in designing responsive SF-based delivery systems in different stimulus sources. These systems are able to release mediators in a desired manner in response to specific stimuli in active or passive manners. We then describe applications of these specially designed responsive delivery systems in wound healing, tumor therapy, as well as immunomodulation. We also discuss the future challenges and prospects of stimuli-responsive SF-based delivery systems.

Collagen and Silk Fibroin as Promising Candidates for Constructing Catalysts

A catalyst determines the mechanism of an organic chemical reaction, thus enabling the commercially viable formation of desired material products. Biopolymers offer new opportunities for the construction of catalysts by virtue of their biocompatibility, environmental benignity, and sustainability, as well as their low cost. Biopolymers are especially useful as carriers and precursors in catalysis application. The employment of biocompatible and biosustainable collagen and silk fibroin materials will revolutionize state-of-the-art electronic devices and systems that currently rely on conventional technologies. In this review, we first consider the ordered hierarchical structure, origin, and processing methods of collagen and silk fibroin. Then, the unique advantages and applicability of collagen and silk fibroin for constructing catalysts are summarized. Moreover, a summary of the state-of-the-art design, fabrication, and application of collagen- and silk fibroin-based catalysts, as well as the application of collagen- and silk-based catalysts, is presented by focusing on their roles as carriers and precursors, respectively. Finally, challenges and prospects are assessed for the construction and development of collagen and silk fibroin-based catalysts.

Electrospinning-Based Carbon Nanofibers for Energy and Sensor Applications

Carbon nanofibers (CNFs) are the most basic structure of one-dimensional nanometer-scale sp2 carbon. The CNF’s structure provides fast current transfer and a large surface area and it is widely used as an energy storage material and as a sensor electrode material. Electrospinning is a well-known technology that enables the production of a large number of uniform nanofibers and it is the easiest way to mass-produce CNFs of a specific diameter. In this review article, we introduce an electrospinning method capable of manufacturing CNFs using a polymer precursor, thereafter, we present the technologies for manufacturing CNFs that have a porous and hollow structure by modifying existing electrospinning technology. This paper also discusses research on the applications of CNFs with various structures that have recently been developed for sensor electrode materials and energy storage materials.