Ladder Mechanisms of Ion Transport in Prussian Blue Analogues

Stabilizing Zinc Hexacyanoferrate Cathode by Low Contents of Cs Cations for Aqueous Zn-Ion Batteries

Exploring cathode materials with excellent electrochemical performance is crucial for developing rechargeable aqueous zinc ion batteries (RAZIBs). Zinc hexacyanoferrate (ZnHCF), a promising candidate of cathode materials for RAZIBs, suffers from severe electrochemical instability issues. This work reports using low contents of alkaline metal cations as electrolyte additives to improve the cycle performance of ZnHCF. The cations with large sizes, particularly Cs+, changes the intercalation chemistry of ZnHCF in RAZIBs. During cycling, Cs+ cations co-inserted into ZnHCF stabilize the host structure. Meanwhile, a stable phase of CsZn[Fe(CN)6] forms on the ZnHCF cathode, suppressing the loss of active materials through dissolution. ZnHCF gradually converts to an electrochemically inert Zn-rich phase during long-term cycling in aqueous electrolyte, leading to irreversible capacity loss. Introducing Cs+ in the electrolyte inhibits this conversion reaction, resulting in the extended lifespan. Owing to these advantages, the capacity retention rate of ZnHCF/Zn full batteries increases from the original 7.0 % to a high value of 54.6 % in the electrolyte containing 0.03 M of Cs2SO4 after 300 cycles at 0.25 A ⋅ g-1. This research provides an in-depth understanding of the electrochemical behavior of ZnHCF in aqueous zinc electrolyte, beneficial for further optimizing ZnHCF and other metal hexacyanoferrates.

Maximizing the Structural Stability of the Na-Rich Prussian Blue Analogue Electrode through Charge Cutoff Voltage Regulation

Prussian blue and its analogues (PB/PBAs) are promising sodium-ion battery cathode materials due to their easy synthesis and excellent discharge capacity. However, their low structural stability poses a challenge. One critical factor affecting stability is the charge cutoff voltage. Increasing this voltage can enhance lithium-ion battery capacity but may reduce cycle retention due to intensified electrode-electrolyte interface reactions. This study investigates whether this phenomenon also applies to sodium-ion batteries and proposes an optimal voltage to improve both the capacity and stability. By cycling between 3.8 and 4.2 V, the charge/discharge profiles and redox reaction intensity were analyzed. The correlation between structural stability and charge cutoff voltage was re-evaluated based on these findings. An optimal charge cutoff voltage of 4.1 V was identified, creating an additional plateau during initial charging and altering Na+ ion positioning to enhance capacity. Enhanced mobility of ions and electrons was observed through a stable solid-electrolyte interphase (SEI) formation. Ex situ X-ray diffraction (XRD) confirmed reversible phase transitions and excellent structural stability. This study underscores the strategic use of charge cutoff voltage to enhance both discharge capacity and structural stability, offering insights for advancing PB/PBA cathode materials with improved stability and capacity.

Prussian Blue Analogues for Sodium-Ion Battery Cathodes: A Review of Mechanistic Insights, Current Challenges, and Future Pathways

Prussian blue analogues (PBAs) have emerged as highly promising cathode materials for sodium-ion batteries (SIBs) due to their affordability, facile synthesis, porous framework, and high theoretical capacity. Despite their considerable potential, practical applications of PBAs face significant challenges that limit their performance. This review offers a comprehensive retrospective analysis of PBAs' development history as cathode materials, delving into their reaction mechanisms, including charge compensation and ion diffusion mechanisms. Furthermore, to overcome these challenges, a range of improvement strategies are proposed, encompassing modifications in synthesis techniques and enhancements in structural stability. Finally, the commercial viability of PBAs is examined, alongside discussions on advanced synthesis methods and existing concerns regarding cost and safety, aiming to foster ongoing advancements of PBAs for practical SIBs.

Enzymatic Precipitation of Highly Electroactive and Ion-Transporting Prussian Blue for a Sensitive Electrochemical Immunosensor

Sensitive and/or multiplex electrochemical biosensors often require efficient (bio)catalytic conversion of substrates into insoluble electroactive products. The enzymatic formation and precipitation of coordination polymers under mild conditions offers a promising solution for this purpose. Herein, we report the enzymatic precipitation of Prussian blue (PB), a highly electroactive and ion-transporting coordination polymer, on an immunosensing electrode for application in a sensitive electrochemical immunosensor for detecting thyroid-stimulating hormone (TSH). Five pairs of redox enzymes and their specific reductants were examined to achieve rapid PB precipitation and electrochemical oxidation. Among these pairs, O2-insensitive flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH) paired with glucose yielded the highest electrochemical signal-to-background (S/B) ratio. FAD-GDH catalyzed the conversion of Fe(CN)63- to Fe(CN)64-, which coordinated with Fe3+, leading to PB formation and subsequent precipitation through repeated conversions. The resulting PB precipitate, with its close proximity to the electrode, facilitated rapid electrochemical oxidation and generated a strong electrochemical signal. Notably, the precipitation and electrochemical oxidation of PB were more effective than those of its analogues. When applied to a sandwich-type immunosensor for TSH detection, the enzymatic PB precipitation achieved a calculated detection limit of approximately 2 pg/mL in artificial serum, covering the clinically relevant range. These findings indicate the potential widespread utility of PB precipitation and electrochemical oxidation for sensitive multiplex biomarker detection.

Fully 3D Modeling of Electrochemical Deionization

Electrochemical deionization devices are crucial for meeting global freshwater demands. One such is capacitive deionization (CDI), which is an emerging technology especially suited for brackish water desalination. In this work, we extend an electrolytic capacitor (ELC) model that exploits the similarities between CDI systems and supercapacitor/battery systems. Compared to the previous work, we introduce new implementational strategies for enhanced stability, a more detailed method of describing charge efficiency, layered integration of leakage reactions, and theory extensions to new material and operational conditions. Thanks to the stability and flexibility the approach brings, the current work can present the first fully coupled and spatiotemporal three-dimensional (3D) CDI model. We hope that this can pave the way toward generalized and full-scale modeling of CDI units under varying conditions. A 3D model can be beneficial for investigating asymmetric CDI device structures, and the work investigates a flow-through device structure with inlet and outlet pipes at the center and corners, respectively. The results show that dead (low-flow) areas can reduce desalination rates while also raising the total leakage. However, the ionic flux in this device is still enough under normal operating conditions to ensure reasonable performance. In conclusion, researchers will now have some flexibility in designing device structures that are not perfectly symmetric (real-life case), and hence we share the model files to facilitate future research with 3D modeling of these electrochemical deionization devices.

Pairing of Aqueous and Nonaqueous Electrosynthetic Reactions Enabled by a Redox Reservoir Electrode

Paired electrolysis methods are appealing for chemical synthesis because they generate valuable products at both electrodes; however, development of such reactions is complicated by the need for both half-reactions to proceed under mutually compatible conditions. Here, a modular electrochemical synthesis (ModES) strategy bypasses these constraints using a "redox reservoir" (RR) to pair electrochemical half-reactions across aqueous and nonaqueous solvents. Electrochemical oxidation reactions in organic solvents, the conversion of 4-t-butyltoluene to benzylic dimethyl acetal and aldehyde in methanol or the oxidative C-H amination of naphthalene in acetonitrile, and the reduction of oxygen to hydrogen peroxide in water were paired using nickel hexacyanoferrate as an RR that can selectively store and release protons (and electrons) while serving as the counter electrode for these reactions. Selective proton transport through the RR is optimized and confirmed to enable the ion balance, and thus the successful pairing, between redox half-reactions that proceed with different rates, on different scales, and in different solvents (methanol, acetonitrile, and water).

Sodium to cesium ions: a general ladder mechanism of ion diffusion in prussian blue analogs

Prussian blue analogs (PBAs) form crystals with large lattice voids that are suitable for the capture, transport and storage of various interstitial ions. Recently, we introduced the concept of a ladder mechanism to describe how sodium ions inside a PBA crystal structure diffuse by climbing the frames formed by aligned cyanide groups in the host structure. The current work uses semi-empirical tight-binding density functional theory (DFTB) in a multiscale approach to investigate how differences in the size of the monovalent cation affect the qualitative and quantitative aspects of the diffusion process. The results show that the ladder mechanism represents a unified framework, from which both similarities and differences between cation types can be understood. Fundamental Coulombic interactions make all positive cations avoid the open vacant areas in the structure, while cavities surrounded by partially negatively charged cyanide groups form diffusion bottlenecks and traps for larger cations. These results provide a new and quantitative way of understanding the suppression of cesium adsorption that has previously been reported for PBAs characterized by a low vacancy density. In conclusion, this work provides a unified picture of the cation adsorption in PBAs based on the newly formulated ladder mechanism.

Electrostatic interactions and physisorption: mechanisms of passive cesium adsorption on Prussian blue

The study finds atomic-level physisorption interactions that leads to electrostatic Langmuir adsorption.