Azadipyrromethene Dye-Assisted Defect Passivation for Efficient and Stable Perovskite Solar Cells

Post-Treating Grain Boundaries and Surface Defects by Long-Chain Polymer for Highly Efficient and Stable Perovskite Solar Cells

Grain boundaries (GBs) and surface defects within perovskite films are inherent challenges that affect the photovoltaic performance of perovskite solar cells  (PSCs. In this work, Nylon 11 (N11) is utilized, a long-chain polymer, for post-treating the GBs and surface defects within FAPbI3 films. The multifunctional groups of N11 exhibit unique passivation abilities, enabling self-regulation and selective correction of reverse-charged defects. Post-treating with N11 results in high-quality FAPbI3 films characterized by tight GBs and low surface defect density. Despite fabrication under full open-air conditions, the N11 post-treatment significantly enhances the power conversion efficiency (PCE) value of FAPbI3 PSCs, increasing it from the reference value of 21.89% to 23.54%. Importantly, the long alkyl chain present in N11 significantly enhances the humidity stability of the PSCs. Unencapsulated PSCs treated with N11 maintain 89% of their initial PCE after exposure to air with 30% relative humidity (RH) for 1000 h, demonstrating resilience to elevated humidity levels. This work highlights the substantial improvement in the photovoltaic performance of PSCs achieved through the post-treatment with N11.

Spiro-Bifluorene-Cored Dopant-Free Conjugated Polymeric Hole-Transporting Materials Containing Passivation Parts for Inverted Perovskite Solar Cells

Two spiro-bifluorene-based dopant-free HTMs (X22 and X23) have been synthesized by facilely condensing spiro-bifluorene diamine with 3,4-ethylenedioxythiophene (EDOT)-5,7-dicarbonyl dichloride and 2,3,5,6-tetrafluoro-terephthaloyl dichloride, respectively. In the X22 molecule, lone pairs of electrons on the sulfur (S) and oxygen (O) functional groups interact with the perovskite materials. The hole mobility (μh) of X22 (3.9 × 10-4 cm2 V-1 S1-) is more than twice that of X23 (1.4 × 10-4 cm2 V-1 S1-). The conductivity (σ0) of X22 is 2.73 × 10-4 S cm-1, which is also higher than that of X23 (2.39 × 10-4 S cm-1). The EDOT moiety benefits the contact angle of CH3NH3PbI3 precursor solutions on HTMs as low as 24°. The X22-based device with an indium-doped tin oxide/hole transport material (HTM)/CH3NH3PbI3/phenyl-C61-butyric acid methyl ester (PC61BM)/bathocuproine/Ag structure achieves a power conversion efficiency (PCE) of 19.18%. The PCE of the device based on X23 containing fluorine is 18.70%, and the contact angle between HTM and the perovskite precursor solution is 32°. The X22- and X23-based devices at ambient temperature (≈25 °C) in N2 retain 86% and 79% of the initial PCE after 150 days. The effect of S, O, and F heteroatoms plays an important role in the side chain modification of HTMs, improving defect passivation in HTM/CH3NH3PbI3 interfaces by multiple functional groups.

Enhancing the Efficiency and Stability of Perovskite Solar Cells through Defect Passivation and Controlled Crystal Growth Using Allantoin

In this study, we present a robust approach that concurrently manages crystal growth and defect passivation within the perovskite layer through the introduction of a small molecule additive─allantoin. The precise regulation of crystal growth in the presence of allantoin yields perovskite films characterized by enhanced morphology, larger grain size, and improved grain orientation. Notably, the carbonyl and amino groups present in allantoin passivate under-coordinated Pb2+ and I- defects, respectively, through molecular interactions. Trap density in the perovskite layer is measured, and it is 0.39 × 1016 cm-3 for the allantoin-incorporated device and 0.83 × 1016 cm-3 for the pristine device. This reduction in defects leads to reduced trap-assisted nonradiative recombination, as confirmed by the photoluminescence, transient photo voltage, and impedance measurements. As a result, when these allantoin-incorporated perovskite films are implemented as the active layer in solar cells, a noteworthy efficiency enhancement to 20.63% is attained, surpassing the 18.04% of their pristine counterparts. Furthermore, devices with allantoin exhibit remarkable operational stability, maintaining 80% of their efficiency even after 500 h of continuous illumination, whereas the pristine device degraded to 65% of its initial efficiency in 400 h. Also, allantoin-incorporated devices exhibited exceptional stability against high humidity and elevated temperatures.

Donor-π-Acceptor Porphyrin-Assisted Bifunctional Defect Passivation for Enhanced Temporal Domain-/Wavelength-Dependent Nonlinear Absorption Properties in Perovskite Films

Perovskite layer defects are a primary inhibiting factor for their optical nonlinearity, which restricts their use in nonlinear photonics devices. Nevertheless, due to the variety of defect types, the passivation and repair of these defects remain challenging. Herein, a novel bifunctional passivation strategy was proposed, and the porphyrin with a donor-π-acceptor structure was designed to bifunctionally repair perovskite defects by linking different types of functional groups via acetylenic π-conjugated linkage bridges on both sides, thus improving the nonlinear optical (NLO) absorption properties of porphyrin-perovskite hybrid materials. Research results indicate that the amino and carboxyl groups of porphyrins endow the ability to bifunctionally passivate charged defects via effective coordination interactions. The nonlinear absorption properties of all porphyrin-passivated MAPbI3 films were remarkably enhanced compared to that of the MAPbI3 film across multiple wavelengths and temporal domains. Particularly, the Por3-passivated perovskite film (MAPbI3/Por3) exhibited optimized strongest NLO performance, including reverse saturable absorption (RSA) under 800 nm femtosecond (fs) and 1064 nm nanosecond (ns) laser irradiations, as well as saturable absorption (SA) with 515 and 532 nm ns laser excitations. The value of the NLO absorption coefficient (β = 266.23 cm GW-1) is 1 order of magnitude higher than that of the pristine perovskite film (β = 12.93 cm GW-1), also outperforming other porphyrin-passivated perovskite films and some reported materials. The bifunctional passivation mechanism of porphyrin not only intensifies the perovskite's photoinduced ground-state dipole moment in the two-photon absorption (TPA) process and the free carrier absorption ability to deepen the RSA properties under 800 nm fs and 1064 nm ns lasers, respectively, but also enables the improvement of SA responses under 515 nm fs and 532 nm ns lasers by expediting the Pauli blocking effect of perovskite. Our study offers a viable paradigm, which aims at exploiting high-performance NLO perovskite materials across wide spectral regions and time scales.

Hydrazone dye passivator for high-performance and stable perovskite solar cells

There has been rapid development of organic-inorganic perovskite solar cells (PSCs) in recent years, but efficiency and stability challenges remain due to the massive defects in perovskite films. Here, the organic dye Th-azi-Pyr (ethyl 2-(2-(3-methyl-5-oxo-1-phenyl-1,5-dihydro-4H-pyrazol-4-ylidene) hydrazineyl)-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carboxylate) with carbonyl, pyrazolone structure, and benzene ring was synthesized and used to prepare high-quality perovskite film as an additive. Th-azi-Pyr formed relatively stable intermediate ligands with uncoordinated Pb and I, slowing the crystal growth and reducing the grain boundary defects of perovskite. In addition, the benzene ring in the dye protected against moisture and increased the stability of the perovskite film. Therefore, the Th-azi-Pyr-modified PSC assembled in an air environment exhibited a promising power conversion efficiency (PCE) of 19.27%, which is superior to the 15.33% of the control PSC. Additionally, 88% of the original performance was maintained after 300 h at 25 ± 5 °C and 50 ± 10% relative humidity, implying that the modified PSCs exhibited greater stability than the untreated PSCs. This work indicates that simple and low-cost organic dyes are excellent defect passivators for high-performance PSCs.

2,2'-Dihydroxy-4,4'-dimethoxy-benzophenon as Bifunctional Additives for Passivated Defects and Improved Photostability of Efficient Perovskite Photovoltaics

Organic-inorganic hybrid perovskite solar cells (PSCs) have developed rapidly in the past decade, but their commercial applications are restricted by further improvement in their photovoltaic performance and stability. Herein, we propose a facile and effective method employing 2,2'-dihydroxy-4,4'-dimethoxy-benzophenon (BP6) as bifunctional additive to construct efficient and photostable PSCs. BP6, as an additive, improves the crystallization quality of perovskite absorbers and further inhibits defect-mediated non-radiative recombination through interaction between the C═O group and defects; as a UV absorber, BP6 protects the PSCs from UV degradation by effectively absorbing UV light through molecular tautomerism under continuous strong UV irradiation. Eventually, the champion PSC demonstrates an efficiency of 22.85% with enhanced UV stability after addition of 0.024 wt % BP6. These results reveal that addition of UV absorbers (such as BP6 in this study) is a simple and effective strategy to fabricate efficient and photostable PSCs.