Oscillation-Induced Mixing Advances the Functionality of Liquid Marble Microreactors

Rod-Shaped Liquid Plasticine as Cuttable Minireactor for Photodynamic Therapy of Tumors

Photodynamic therapy (PDT) has emerged as a promising non-invasive approach for cancer treatment. Enhancing its efficacy and understanding its absorption-induced attenuation are significant while the solutions are limited, particularly for the latter. In this study, a rod-shaped liquid plasticine (LP), comprised of a tumor cell solution encased by a nanoparticle monolayer, is used to serve as a powerful minireactor for addressing these issues. The channel structure, openness, and cuttability of the LP reactor are exploited for providing benefits to PDT. The resulting PDT efficacy is several times higher than those from droplet reactors with common spherical shapes. The attenuation law, which is fundamental in PDT yet poorly understood due to the lack of experimental approaches, is preliminarily uncovered here from the perspective of in vitro experiments by using the LP's cuttability, affording quantitative understanding on this difficult subject. These findings provide insights into the widely-concerned topics in PDT, and highlight the great potential of an LP reactor in offering innovation power for the biochemical and biomedical arenas.

Liquid marbles: review of recent progress in physical properties, formation techniques, and lab-in-a-marble applications in microreactors and biosensors

Liquid marbles (LMs) are nonsticking droplets whose surfaces are covered with low-wettability particles. Owing to their high mobility, shape reconfigurability, and widely accessible liquid/particle possibilities, the research on LMs has flourished since 2001. Their physical properties, fabrication mechanisms, and functionalisation capabilities indicate their potential for various applications. This review summarises the fundamental properties of LMs, the recent advances (mainly works published in 2020-2023) in the concept of LMs, physical properties, formation methods, LM-templated material design, and biochemical applications. Finally, the potential development and variations of LMs are discussed.

Open millifluidics based on powder-encased channels

Millifluidics, the manipulation of liquid flow in millimeter-sized channels, has been a revolutionary concept in chemical processing and engineering. The solid channels that contain the liquids, though, are not flexible in their design and modification, and prevent contact with the external environment. All-liquid constructs, on the other hand, while flexible and open, are imbedded in a liquid environment. Here, we provide a route to circumvent these limitations by encasing the liquids in a hydrophobic powder in air that jams on the surface, containing and isolating flowing fluids, offering flexibility and adaptability in design, as manifest in the ability to reconfigure, graft, and segment the constructs. Along with the open nature of these powder-contained channels that allow arbitrary connections/disconnections and substance addition/extraction, numerous applications can be opened in the biological, chemical, and material arenas.

Liquid Plasticine-Based Electrokinetic Enrichment of Proteins

Protein analysis is an important approach for disease diagnosis, in which sample pretreatment is an essential step since protein samples are often complex and many protein biomarkers are of low abundance. Here, given the good openness and light transmission of liquid plasticine (LP), which is a liquid entity formed by SiO₂ nanoparticles and encapsulated aqueous solution, we developed a LP-based field-amplified sample stacking (FASS) system for protein enrichment. The system was composed of a LP container, a sample solution and a Tris-HCl solution containing hydroxyethyl cellulose (HEC). The system design, mechanism investigation, optimization of experimental parameters and characterization of LP-FASS performance for protein enrichment were well studied. Under the optimized experimental conditions of 1 % HEC, 100 mm Tris-HCl and 100 V in the LP-FASS system, a 40-80 times enrichment of proteins was obtained in 40 min using bovine hemoglobin (BHb) as the model protein using the constructed LP-FASS system. The simultaneous enrichment of multiple proteins (phycocyanin, BHb and cytochrome C) was also realized using the system. The LP-FASS system can serve as a new platform for protein enrichment which is easy to be combined with online and offline detections.

Experimental and Theoretical Investigation on the Dynamic Response of Ferrofluid Liquid Marbles to Steady and Pulsating Magnetic Fields

Liquid marbles are droplets enwrapped by a layer of hydrophobic micro/nanoparticles. Due to the isolation of fluid from its environment, reduction in evaporation rate, low friction with the surfaces, and capability of manipulation even on hydrophilic surfaces, liquid marbles have attracted the attention of researchers in digital microfluidics. This study investigates the manipulation of ferrofluid liquid marbles (FLMs) under DC and pulse width-modulated (PWM) magnetic fields generated by an electromagnet for the first time. At first, the threshold of the magnetic field for manipulating these FLMs is studied. Afterward, the dynamic response of the FLMs to the DC magnetic field for different FLM volumes, coil currents, and initial distances of FLM from the coil is studied, and a theoretical model is proposed. By applying the PWM magnetic field, it is possible to gain more control over the manipulation of the FLMs on the surface and adjust their position more accurately. Results indicate that with a decrease in FLM volume, coil current, and duty cycle, the FLM step length decreases; hence, FLM manipulation is more precise. Under the PWM magnetic field, it is observed that FLM movement is not synchronous with the generated pulse, and even after the coil is turned off, FLMs keep their motion. In the end, with proper adjustment of the electromagnet pulse width, launching of FLMs at a distance farther than the coil is observed.

Photo- and Thermoresponsive Liquid Marbles Based on Fatty Acid as Phase Change Material Coated by Polypyrrole: From Design to Applications

Responsive liquid marbles (LMs), which can change their shape, stability, and motion by the application of stimuli, attract a growing interest due to their wide range of applications. Our approach to design photo- and thermoresponsive LMs is based on the use of micrometer-sized fatty acid (FA) particles as phase change material covered with polypyrrole (PPy) overlayers with photothermal property. The core-shell particles were synthesized by aqueous chemical oxidative seeded dispersion polymerization. First, we investigated the effect of the alkyl chain length of FA on the resulting FA/PPy core-shell particles by characterizing their size and its distribution, shape, morphology, chemical composition, and photothermal behavior. Then LMs were fabricated by rolling water droplets on the dried FA/PPy particle powder bed and their light and temperature dual stimuli-responsive nature was studied as a function of the FA alkyl chain length. For all FAs studied, LMs disrupted in a domino manner by light irradiation as the first trigger: the temperature of the FA/PPy particles on the LM surface increased by light irradiation, followed by phase change of FA core of the particles from solid to liquid, resulting in disruption of the LM and release of the encapsulated water. The disruption time was closely correlated to the melting point of FA linked to the alkyl chain length and light irradiation power, and it could be controlled and tuned easily between quasi instantaneous and approximately 10 s. Finally, we showed potential applications of the LMs as a carrier for controlled delivery and release of substances and a sensor.

Magnetically Driven Manipulation of Nonmagnetic Liquid Marbles: Billiards with Liquid Marbles

Liquid marbles are droplets encapsulated by a layer of hydrophobic nanoparticles and have been extensively employed in digital microfluidics and lab-on-a-chip systems in recent years. In this study, magnetic liquid marbles were used to manipulate nonmagnetic liquid marbles. To achieve this purpose, a ferrofluid liquid marble (FLM) was employed and attracted toward an electromagnet, resulting in an impulse to a water liquid marble (WLM) on its way to the electromagnet. It was observed that the manipulation of the WLM by the FLM was similar to the collision of billiard balls except that the liquid marbles exhibited an inelastic collision. Taking the FLM as the projectile ball and the WLM as the other target balls, one can adjust the displacement and direction of the WLM precisely, similar to an expert billiard player. Firstly, the WLM displacement can be adjusted by altering the liquid marble volumes, the initial distances from the electromagnet, and the coil current. Secondly, the WLM direction can be adjusted by changing the position of the WLM relative to the connecting line between the FLM center and the electromagnet. Results show that when the FLM or WLM volume increases by five times, the WLM shooting distance approximately increases by 200% and decreases by 75%, respectively.

Droplet Tweezers Based on the Hydrophilic-Hydrophobic Interface Structure and Their Biological Application

Droplet controllable operation has wide applications in microfluidics, biomedicine, microreactors, and other fields. Droplets can spontaneously transfer from a high-energy state to a low-energy state, but how to reverse transfer the droplets is a difficult task. In this article, we use a special hydrophilic-hydrophobic interphase structure (HHIS) to achieve this reverse transfer. We specifically study the critical conditions under which droplet transfer can be achieved. The length of the hydrophilic surface in this structure and the hydrophilic/hydrophobic properties of the surface must be in the appropriate range. Based on this, an optimized structure used to transfer droplets was designed. Finally, we carried out research on biological applications and successfully achieved the transfer of droplets from zebrafish eggs and zebrafish larvae. This unique method is low-cost, biofriendly, and highly applicable to various surfaces, illustrating the great potential in chemical and biological analysis.

Preparation of Phase Change Melt Marbles with High Thermal Stability by Spontaneous Shrinkage and Encapsulation

Liquid marbles (LMs) are widely used in the fields of microfluids, gas sensitivity equipment, and microreactors. However, the thermal stability of the encapsulated liquid poses difficulty to the high-temperature stability of LMs. In this study, polar phase-change materials (PCMs) with high melting points were used as the encapsulated liquid of LMs. According to the required temperature, suitable PCMs were selected as the core and encapsulated by hydrophobic SiO₂ particles to form melt marbles (MMs). The types of PCMs used to prepare the MMs include erythritol, elemental sulfur, urea, and molten salts. Based on the premixed melting method, a series of MMs with high melting points and thermal stability were successfully developed. The highest acceptable temperature of the MMs exceeded 323 °C, and the evaporation rate of erythritol MMs was less than 1% at 140 °C in 8 h. Thus, the MMs maintained their excellent stability through multiple phase transitions. In the molten state, the MMs exhibited the properties of bounce ability, cuttability, and deformation resistance. The performance of the PCMs in energy storage and release during phase transition demonstrates their potential applications in the field of heat storage.

Photo/Thermo Dual Stimulus-Responsive Liquid Marbles Stabilized with Polypyrrole-Coated Stearic Acid Particles

In this study, we report on the fabrication of photo/thermo dual stimulus-responsive liquid marbles (LMs) that can be disrupted by light irradiation and/or heating. To stabilize the LMs, we synthesized micrometer-sized stearic acid (SA) particles coated with overlayers of polypyrrole (PPy) by aqueous chemical oxidative seeded dispersion polymerization. The SA/PPy core-shell particles could adsorb at the air-water interface to stabilize LMs by rolling water droplets on the particle powder bed. The presence of SA, known as a phase-change material, which undergoes a transition from solid to liquid by heating, and PPy, which can transduce light to heat, gives rise to the photo and thermo dual stimulus-responsive characters of the LMs. The disruption of the LMs could be induced in a cascade manner: light irradiation on the LM induced a temperature increase, followed by melting of the SA component on the LM surface, leading to its disruption and release of the inner water. The disruption time is linked to the PPy loading and light irradiation power, and it can be tuned from quasi-instantaneous to a few tens of seconds. The melting of SA due to a light-induced phase change from the solid to liquid state is a new mechanism to trigger the disruption of LMs. We finally demonstrated two applications of the LMs as a light-responsive microreactor and a sensor.