Functional Polyaniline/MXene/Cotton Fabrics with Acid/Alkali-Responsive and Tunable Electromagnetic Interference Shielding Performances

A Facile Method in Fabricating Flexible Conductive Composites with Large-Size Segregated Structures for Electromagnetic Interference Shielding

To resist the plastic deformation of polymer particles during hot press molding, high molecular weights, and moduli are required for composites with segregated structures, thus the prepared composites exhibit poor flexibility. Also, larger particle sizes can bring lower percolation thresholds while the ensuing greater deformation destroys the conductive network. Moreover, segregated composites still face preparation complexities. Herein, a facile method for developing flexible composites with large-size segregated structures is proposed. First, silver-coated polydopamine-modified reduced graphene oxide (Ag@PrGO), as conductive fillers, is prepared by electroless plating. Next, polydimethylsiloxane (PDMS)-coated polyolefin elastomer (POE) beads are put into a bag containing the fillers. After a simple shaking, the fillers are adhered to the POE surface as the cohesive property of cured PDMS. Finally, flexible composites with large-size segregated structures are obtained via hot pressing. Benefiting from the 2D structure of the Ag@PrGO and the ability to slip, the conductive networks possess adaptable deformability. The prepared composites exhibit excellent electrical conductivity (203.55 S cm-1) at filler volume fractions of 3.4 vol%. The EMI shielding effectiveness can reach 70 dB in the X-band at a thickness of 1.9 mm and remains stable after bending and rubbing damage. This work paves the way for constructing large-size segregated structures.

Regulating the Conductive Network of Graphene/Ni Composite Films toward Tunable Electromagnetic Shielding Efficiency

Smart electromagnetic interference (EMI) shielding materials with adjustable shielding efficiency (SE) hold immense importance in the field of wearable and switchable EMI shielding. However, existing materials often suffer from a constrained tunability range and inadequate stability. In this study, a highly stretchable conductive framework is fabricated by integrating Ni-doped laser-induced graphene (LIG/Ni) with silicone. Through meticulous manipulation of the LIG scanning trajectory and Ni nanoparticle (NP) deposition parameters, ordered and dense conductive pathways were formed. This ordered structure preserves the graphene's structural coherence and conductivity along the axis perpendicular to stretching, while graphene parallel to the stretching direction forms random connections, resulting in the effective regulation of electrical conductivity. Under a 200% strain, the electrical conductivity dropped to a minimum of 1.07 S/cm, and the average SE in the X-band was reduced to 2.33 dB. Upon strain release, the conductive network rapidly reconfigured, boosting conductivity to 63.6 S/m and an enhanced SE of 68.12 dB. With its highly reversible conductive network, this composite exhibits exceptional cycling stability and an expansive range of adjustable SE, thereby holding immense practical value for versatile electromagnetic protection applications.

Cellulose-based functional textiles through surface nano-engineering with MXene and MXene-based composites

The emergence of smart textiles with the ability to regulate body temperature, monitor human motion, exhibit antibacterial properties, sound fire alarms, and offer fire resistance has sparked considerable interest in recently. MXene displays remarkable attributes like high metallic conductivity, electromagnetic shielding capability, and photothermal/electrothermal properties. Furthermore, due to the highly polar surface groups, MXene nanosheets show exceptional hydrophilic properties and are able to establish strong connections with the polar surfaces of natural fabrics. This review focuses on the most recent developments in altering the surface of cellulosic textiles with MXene and MXene-based composites. The combination of MXene with other modifier agents, such as phosphorous compounds, graphene, carbon nanotube, conductive polymers, antibacterial macromolecules, superhydrophobic polymers, and metal or metal oxide nanoparticles, imparts diverse functionalities to textiles, such as self-cleaning and fire resistance. Moreover, the synergistic effects between these modifier agents with MXenes can improve MXene-related properties like antibacterial, photothermal, electrothermal, and motion- and fire-sensing characteristics.

Multilevel structural polylactic acid fabrics for flame retardancy, durability, and electromagnetic interference shielding

The integration of polylactic acid (PLA) fabrics with bio-based flame retardants and conductive MXene addresses the requirements for safe sustainable development and electromagnetic interference (EMI) shielding. The dehydration and carbonization of phytic acid (PA) and polyethylenimine (PEI) were facilitated by employing 3-glycidyl oxy propyl trimethoxsilane (GPTMS) as an organic crosslinking agent, which was covalently bonded to both the flame retardants and the MXene conductive layer. The prepared multifunctional PLA fabric, designated as PA-PEI-MXene-60, exhibits a high Limiting Oxygen Index (LOI) of 35.6 %, a damage length of 3.2 cm, a peak heat release rate (pHRR) reduction of 81.38 %, and total heat release (THR) reduction of 27.03 %, indicating exceptional flame-retardant properties. Concurrently, the MXene conductive layer provides outstanding EMI shielding performance. A subsequent hydrophobic treatment was applied using polydimethylsiloxane (PDMS) coatings, resulting in a water contact angle of 148.8°. Additionally, while the PLA fabrics exhibited remarkable EMI shielding effectiveness at 54 dB. Importantly, despite undergoing repeated bending and abrasion tests, these multifunctional PLA fabrics maintain relatively high EMI shielding efficiency, demonstrating commendable durability. This work significantly contributes to the research and development of bio-based, safe, durable multifunctional flame-retardant materials with EMI shielding capabilities.

Multifunctional Wearable Electronic Based on Fabric Modified by PPy/NiCoAl-LDH for Energy Storage, Electromagnetic Interference Shielding, and Photothermal Conversion

With the rapid advancement of electronic technology, traditional textiles are challenged to keep up with the demands of wearable electronics. It is anticipated that multifunctional textile-based electronics incorporating energy storage, electromagnetic interference (EMI) shielding, and photothermal conversion are expected to alleviate this problem. Herein, a multifunctional cotton fabric with hierarchical array structure (PPy/NiCoAl-LDH/Cotton) is fabricated by the introduction of NiCoAl-layered double hydroxide (NiCoAl-LDH) nanosheet arrays on cotton fibers, followed by polymerization and growth of continuous dense polypyrrole (PPy) conductive layers. The multifunctional cotton fabric shows a high specific areal capacitance of 754.72 mF cm-2 at 5 mA cm-2 and maintains a long cycling life (80.95% retention after 1000 cycles). The symmetrical supercapacitor assembled with this fabric achieves an energy density of 20.83 µWh cm-2 and a power density of 0.23 mWcm-2. Moreover, the excellent electromagnetic interference shielding (38.83 dB), photothermal conversion (70.2 °C at 1000 mW cm-2), flexibility and durability are also possess by the multifunctional cotton fabric. Such a multifunctional cotton fabric has great potential for using in new energy, smart electronics, and thermal management applications.

MXene Composite Electromagnetic Shielding Materials: The Latest Research Status

MXene emerges as a premier candidate for electromagnetic shielding owing to its unique properties as a novel two-dimensional material. Its exceptional electrical conductivity, chemical reactivity, surface tunability, and facile processing render it highly suitable for diverse electromagnetic shielding applications. The research status of MXene and MXene-based electromagnetic shielding materials is systematically discussed in this paper. First, the research status of MXene as a single-component electromagnetic shielding material is briefly introduced. Subsequently, the research status of composite structures constructed by MXene with polymers, carbon derivatives, and ferrites is introduced in detail. Furthermore, the research progress of MXene-based ternary and quaternary composite electromagnetic shielding materials is further focused. Finally, the application of MXene-based composite electromagnetic shielding materials is prospected. A deeper understanding of MXene's electromagnetic shielding properties is facilitated by this paper, providing the direction for the future development of two-dimensional materials in the design and processing of electromagnetic shielding materials.

Electromagnetic Interference Shielding and Joule Heating Properties of Flexible, Lightweight, and Hydrophobic MXene/Nickel-Coated Polyester Fabrics Manufactured by Dip-Dry Coating and Electroless Plating

High-performance electromagnetic interference (EMI) shielding materials with high flexibility, low density, and hydrophobic surface are crucial for modern integrated electronics and telecommunication systems in advanced industries like aerospace, military, artificial intelligence, and wearable electronics. In this study, we present flexible and hydrophobic MXene/Ni-coated polyester (PET) fabrics featuring a double-layered structure, fabricated via a facile and scalable dip-dry coating process followed by electroless nickel plating. Increasing the dip-dry coating iterations up to 10 cycles boosts the MXene loading content (∼31 wt %) and electrical conductivity (∼86 S/cm) of MXene-coated PET fabrics, while maintaining constant porosity (∼95%). The addition of a Ni layer enhances hydrophobicity, achieving a high water contact angle of ∼114° compared to only MXene-coated PET fabrics (∼49°). Furthermore, the 30 μm thick MXene/Ni-coated PET fabric demonstrates superior electrical conductivity (∼113.8 S/cm) and EMI shielding effectiveness (∼35.7 dB at 8-12 GHz) compared to only MXene- or Ni-coated PET fabrics. The EMI shielding performance of the MXene/Ni-coated PET fabric remains more stable in an air environment than only MXene-coated fabrics due to the outer Ni layer with excellent hydrophobicity and oxidation stability. Additionally, the MXene/Ni-coated PET fabric exhibits impressive Joule heating performance, swiftly converting electrical energy into heat and reaching high steady-state temperatures (32-92 °C) at low applied voltages (0.5-1.5 V).

Tunable High-Performance Electromagnetic Interference Shielding of VO2 Nanowires-Based Composite

The unique metal-insulator transition of VO2 is very suitable for dynamic electromagnetic (EM) regulation materials due to its sharp change in electrical conductivity. Here, we have developed an off/on switchable electromagnetic interference (EMI) shielding composite by interconnecting VO2 nanowires (NWs) in poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) to form conductive networks, resulting in outstanding performance at the X and Ku bands with maximum change values of 44.8 and 59.4 dB, respectively. The unique insulator-to-metal transition (IMT) of VO2 NWs has dominated the variation of polarization loss (εp″) and conductivity loss (εσ″) for the composites, which is the mechanism of EMI shielding switching between off and on states. Furthermore, the composite exhibits good cycling stability of the off/on switchable EMI shielding performance and has excellent mechanical properties, especially with 200 times abrasion resistance without obvious weight loss. This study provides a unique approach for dynamic switching of EM response with the potential to construct practical intelligent EM response systems for next-generation smart electromagnetic devices in various scenarios.

AgNWs/Fe3O4@NC Conductive Network Hierarchical Assembly to Prepare Flexible EMI Shielding Textile

With the rapid development of high-power electronic instruments and communication technology, efficient electromagnetic shielding materials with strong absorption of electromagnetic waves and low reflection characteristics have become the focus of the world's attention. This study designs and synthesizes N-doped carbon-coated hollow Fe3O4 nanospheres (Fe3O4@NC) by spraying Ag nanowires (AgNWs) on textiles as conductive networks. Because of the high permeability and hollow structure Fe3O4@NC, electromagnetic wave goes through a unique process of "absorption, reflection, and reabsorption" when it passes through the surface of the composite textile. In X-band (≈8.2-12.4 GHz), the average electromagnetic interference shielding effectiveness (EMI SE) reaches 50.1 dB, while the reflectance shielding efficiency (SER) is only 2.6 dB, and the average reflectance power coefficient (R) is as low as 0.45. The composite fabric has excellent properties and provides an effective strategy for electromagnetic interference shielding based on absorption.

High-Precision Printing of Flexible MXene Patterns for Dynamically Tunable Electromagnetic Interference Shielding Performance

Smart electromagnetic interference (EMI) shielding materials are of great significance in coping with the dynamic performance demands of cutting-edge electronic devices. However, smart EMI shielding materials are still in their infancy and face a variety of challenges (e.g., large thickness, limited tunable range, poor reversibility, and unclear mechanisms). Here, we report a method for controllable shielding electromagnetic (EM) waves through subwavelength structure changes regulated by the customized structure via a direct printing route. The highly conductive MXene ink is regulated with metal ions (Al3+ ions), giving superb metallic conductivity (∼5000 S cm-1) for the printed lines without an annealing treatment. The reversible tunability of EMI shielding effectiveness (SE) ranging from 8.2 dB ("off" state) to 34 dB ("on" state) is realized through the controllable modulation of subwavelength structure driven by stress. This work provides a feasible strategy to develop intelligent shielding materials and EM devices.

Controllable proton-reservoir ordered gel towards reversible switching and reliable electromagnetic interference shielding

Smart and dynamic electromagnetic interference (EMI) shielding materials possess a remarkable capacity to modify their EMI shielding abilities, rendering them invaluable in various civil and military applications. However, the present response mechanism of switch-type EMI shielding materials is slightly restricted, as it primarily depends on continuous pressure induction, thereby resulting in concerns regarding their durability and reliability. Herein, for the first time, we demonstrate a novel method for achieving solvent-responsive, reversible switching, and robust EMI shielding capabilities using a controlled proton-reservoir ordered gel. The gel contains polyaniline (PANI) and sodium alginate (SA). Initially, SA acts as a proton reservoir for PANI in an aqueous system, enhancing the doping level of PANI and improving its electrical conductivity. Additionally, PANI and SA chains respond to diverse polar solvents, such as water, acetonitrile, ethanol, n-hexane, and air, inducing distinct conformations that affect the degree of PANI conjugation and electron migration along the chains. This process is reversible and non-destructive to the polymer chain, ensuring the effective and uncompromised performance of the EMI shielding switch. We can achieve precise and reversible tuning (on/off) of EMI shielding with different effectiveness levels by manipulating the solvents within the framework. This work opens a new solvent-stimuli avenue for the development of EMI shielding materials with reliable and intelligent on/off switching capabilities.

Scalable and Multifunctional Polyurethane/MXene/Carbon Nanotube-Based Fabric Sensor toward Baby Healthcare

Continuous monitoring of physiological health status and effective protection against external hazards is an indispensable aspect of healthcare management for critically vulnerable populations, particularly for infants or babies. So, the exploration of all-in-one devices remains critical to avoiding their injury and illness. The integration of multiple properties such as sensing, electromagnetic protection, warming/cooling, and water/bacterial repellence into a common fabric is no doubt a promising solution to coping with diverse application scenarios. However, achieving simultaneous integration in an effective and durable fashion faces huge challenges. Herein, multifunctional fabric was achieved by sequentially coating MXene, carbon nanotubes (CNTs), and self-healing polyurethane (PU) onto cotton fabric. The outstanding conductivity of MXene and CNTs as well as the self-healing ability of PU synergistically enable a flexible, breathable, protective, and sensing fabric with a good durability. It could detect the body motions like bending of the finger, elbow, wrist, and knee, with a high gauge factor of 8.78 and fast response. Moreover, this sensing fabric could protect the wearers against electromagnetic waves and bacteria, delivering a minimum reflection loss of -57.6 dB at 7.6 GHz and high bacterial inhibition efficiency due to the incorporation of MXene and polyethylenimine. Besides, the electrothermal performance of carbonaceous materials enables them to act as a heater for body warmth. The synergistic design of this multifunctional textile offers a promising strategy for producing advanced smart textiles, holding great promise in infant or baby healthcare.

An ultra-thin and highly efficient electromagnetic interference shielding composite paper with hydrophobic and antibacterial properties

Facing the increasing electromagnetic interference (EMI) pollution in the living environment, it is a new trend to explore an efficient EMI shielding material with facile fabrication and a wide range of application scenarios. A hydrophobic composite paper composed of silver nanowires (AgNWs) and kapok microfibers cellulose (MFC) was modified by methyl trimethoxy silane (MTMS) through a simple method. As a result, the composite paper has a good EMI shielding effectiveness (EMI SE) of 61.7 dB with electrical conductivity of 695.41 S/cm. The modification of MTMS improved the thermal stability performance of composite paper, which also increased its water contact angle to 113°. The free silver ions (Ag+) released from AgNWs can kill surrounding microbial bacteria, endowing the composite paper with good antibacterial property. Water resistance and antibacterial property enable MTMS/AgNWs/MFC composite paper to cope with complex application environments.

Structural design and preparation of Ti3C2Tx MXene/polymer composites for absorption-dominated electromagnetic interference shielding

Electromagnetic interference (EMI) is a pervasive and harmful phenomenon in modern society that affects the functionality and reliability of electronic devices and poses a threat to human health. To address this issue, EMI-shielding materials with high absorption performance have attracted considerable attention. Among various candidates, two-dimensional MXenes are promising materials for EMI shielding due to their high conductivity and tunable surface chemistry. Moreover, by incorporating magnetic and conductive fillers into MXene/polymer composites, the EMI shielding performance can be further improved through structural design and impedance matching. Herein, we provide a comprehensive review of the recent progress in MXene/polymer composites for absorption-dominated EMI shielding applications. We summarize the fabrication methods and EMI shielding mechanisms of different composite structures, such as homogeneous, multilayer, segregated, porous, and hybrid structures. We also analyze the advantages and disadvantages of these structures in terms of EMI shielding effectiveness and the absorption ratio. Furthermore, we discuss the roles of magnetic and conductive fillers in modulating the electrical properties and EMI shielding performance of the composites. We also introduce the methods for evaluating the EMI shielding performance of the materials and emphasize the electromagnetic parameters and challenges. Finally, we provide insights and suggestions for the future development of MXene/polymer composites for EMI shielding applications.

Recent advances in polyaniline-based micro-supercapacitors

The rapid development of the Internet of Things (IoTs) and proliferation of wearable electronics have significantly stimulated the pursuit of distributed power supply systems that are small and light. Accordingly, micro-supercapacitors (MSCs) have recently attracted tremendous research interest due to their high power density, good energy density, long cycling life, and rapid charge/discharge rate delivered in a limited volume and area. As an emerging class of electrochemical energy storage devices, MSCs using polyaniline (PANI) electrodes are envisaged to bridge the gap between carbonaceous MSCs and micro-batteries, leading to a high power density together with improved energy density. However, despite the intensive development of PANI-based MSCs in the past few decades, a comprehensive review focusing on the chemical properties and synthesis of PANI, working mechanisms, design principles, and electrochemical performances of MSCs is lacking. Thus, herein, we summarize the recent advances in PANI-based MSCs using a wide range of electrode materials. Firstly, the fundamentals of MSCs are outlined including their working principle, device design, fabrication technology, and performance metrics. Then, the working principle and synthesis methods of PANI are discussed. Afterward, MSCs based on various PANI materials including pure PANI, PANI hydrogel, and PANI composites are discussed in detail. Lastly, concluding remarks and perspectives on their future development are presented. This review can present new ideas and give rise to new opportunities for the design of high-performance miniaturized PANI-based MSCs that underpin the sustainable prosperity of the approaching IoTs era.

MOF-Derived Co/C and MXene co-Decorated Cellulose-Derived Hybrid Carbon Aerogel with a Multi-Interface Architecture toward Absorption-Dominated Ultra-Efficient Electromagnetic Interference Shielding

Exploring electromagnetic interference (EMI) shielding materials with ultra-efficient EMI shielding effectiveness (SE) and an absorption-dominated mechanism is urgently required for fundamentally tackling EMI radiation pollution. Herein, zeolitic imidazolate framework-67 (ZIF-67)/MXene/cellulose aerogels were first prepared via a simple solution mixing-regeneration and freeze-drying process. Subsequently, they are converted into electric/magnetic hybrid carbon aerogels (Co/C/MXene/cellulose-derived carbon aerogels) through a facile pyrolysis strategy. ZIF-67-derived porous Co/C could provide the additional magnetic loss capacity. The resultant electric/magnetic hybrid carbon aerogels exhibit a hierarchically porous structure, complementary electromagnetic waves (EMWs) loss mechanisms, and abundant heterointerfaces. The construction of a porous architecture and the synergy of electric/magnetic loss could greatly alleviate the impedance mismatching at the air-specimen interface, which enables more EMWs to enter into the materials for consumption. Moreover, numerous heterointerfaces among Co/C, Ti₃C₂T_x MXene, and cellulose-derived carbon skeleton induce the generation of multiple polarization losses containing interfacial and dipole polarization, which further dissipate the EMWs. The resultant electric/magnetic hybrid carbon aerogel with a low density (85.6 mg/cm³) achieves an ultrahigh EMI SE of 86.7 dB and a superior absorption coefficient of 0.72 simultaneously. This work not only offers a novel approach to design high-performance EMI shielding materials entailing low reflection characteristic but also broadens the applicability of electric/magnetic hybrid carbon aerogels in aerospace, precision electronic devices, and military stealth instruments.

Multifunctional Superamphiphobic Cotton Fabrics with Highly Efficient Flame Retardancy, Self-Cleaning, and Electromagnetic Interference Shielding

Here, a facile method is reported to prepare multifunctional cotton fabrics with high flame retardancy, high electrical conductivity, superamphiphobicity, and high electromagnetic shielding. The cotton fabric surface was first modified with phytic acid (PA), which promoted dehydration and carbonization of cellulose to increase flame retardancy in the process of pyrolysis. Tannic acid (TA) and 3-aminopropyltriethoxysilane (APTES) coating with nanospheres as interlayers created hierarchical roughness that facilitated the construction of superamphiphobic surfaces and provided adhesion sites for silver nanoparticles. In addition, the TA-APTES coating improved flame retardancy because the APTES-containing silicon could form silicon carbon layers to isolate heat and oxygen. Subsequently, the surface energy of the composite cotton fabric was reduced by fluorine-containing molecules. The prepared composite cotton fabric exhibited excellent superamphiphobicity with contact angles of 160.3 and 152° for water and olive oil, respectively. The conductivity and EMI shielding efficiency of the prepared composite cotton fabric reached 629.93 S/cm and 76 dB, respectively. Importantly, the composite cotton fabric maintained a relatively stable EMI shielding efficiency even after cyclic bending and abrasion tests. Moreover, the composite cotton fabric possessed a high limiting oxygen index (LOI) of 45.3% and self-extinguishing properties with the peak heat release rate (PHHR) and total heat release (THR) reduced by 73 and 67%, respectively, than the pure cotton fabric, indicating the outstanding flame retardancy.

A Multifunctional Flexible Electronic Skin for Dynamic Thermal Radiation Regulation and Electromagnetic Interference Shielding

A multifunctional electronic skin with thermal radiation regulation and electromagnetic interference (EMI) shielding is urgent for electronic systems because of the thermal radiation emission and electromagnetic wave pollution. Herein, a flexible electronic skin was designed and fabricated, where the polyaniline (PANI) served as the functional layer and Ti₃C₂T_x MXene was employed as the conductive electrode. The transformation of emeraldine salt (ES) and leucoemeraldine base (LB) of PANI makes the skin achieve an infrared emissivity modulation, and the electromagnetic loss of PANI and ultrahigh electrical conductivity of Ti₃C₂T_x MXene make it exhibit EMI shielding ability. Benefiting from the special structural design, the multifunctional skin with a small thickness (0.3 mm) and low surface density (0.06 g/cm²) exhibits an excellent infrared emissivity modulation ability (Δε) of 0.32 with emissive power of 119.1 W/m² at the wavelength range of 2.5-25 μm and total shielding effectiveness (SE_T) of 36.3 dB over the X-band (8.2-12.4 GHz). Meanwhile, the multifunctional skin remains black in the visible spectrum but a changeable color in the infrared spectrum. Even after repeated bending and twisting, the multifunctional skin still maintains a good emissivity adjustment. The simultaneous realization of dynamic thermal radiation regulation and EMI shielding endows the skin promising potential for various fields, such as adaptive infrared camouflage, thermal regulation, anticounterfeiting, and EMI shielding-related crossing field.

Multifunctional CoFe2O4@MXene-AgNWs/Cellulose Nanofiber Composite Films with Asymmetric Layered Architecture for High-Efficiency Electromagnetic Interference Shielding and Remarkable Thermal Management Capability

Developing high-efficiency electromagnetic interference (EMI) shielding composite films with outstanding flexibility and excellent thermal management capability is vital but challenging for modern integrated electronic devices. Herein, a facile two-step vacuum filtration method was used to fabricate ultrathin, flexible, and multifunctional cellulose nanofiber (CNF)-based composite films with an asymmetric layered architecture. The asymmetric layered structure is composed of a low-conductivity CoFe₂O₄@MXene/CNF layer and a highly conductive silver nanowires (AgNWs)/CNF layer. Benefiting from the rational placement of the impedance matching layer and shielding layer, as well as the synergistic effect of electric and magnetic losses, the resultant composite film exhibits an extremely high EMI shielding effectiveness (SE) of 73.3 dB and an average EMI SE of 70.9 dB with low reflected efficiency of 4.9 dB at only 0.1 mm thickness. Sufficiently reliable EMI SE (over 95% reservation) is attained even after suffering from continuous physical deformations and long-term chemical attacks. Moreover, the prepared films exhibit extraordinary flexibility, strong mechanical properties, and satisfactory thermal management capability. This work offers a viable strategy for exploiting high performance EMI shielding films with attractive thermal management capacity, and the resultant films present extensive application potential in aerospace, artificial intelligence, advanced electronics, stealth technology, and the national defense industry, even under harsh environments.

Rheology-Guided Assembly of a Highly Aligned MXene/Cellulose Nanofiber Composite Film for High-Performance Electromagnetic Interference Shielding and Infrared Stealth

Delicately aligned structures of two-dimensional (2D) MXene nanosheets have demonstrated positive effects on applications, especially in electromagnetic interference (EMI) shielding and infrared (IR) stealth. However, precise regulation of structural assembly by theory-guided solution processing is still a great challenge. Herein, one-dimensional (1D) cellulose nanofibers (CNFs) with a high aspect ratio are applied as a reinforcing agent and a rheological modifier for MXene/CNF colloids to fabricate aligned MXene-based materials for EMI shielding and IR stealth. Notably, a systematical rheological study of the MXene/CNF colloids is proposed to determine the optimal solution-processing conditions for finely oriented component arrangement requirements and provides in-depth information on the interactions between the components. The delicately regulated orientation structure assembled by shear inducement is convincingly demonstrated through micro-CT and wide-angle X-ray diffraction/small-angle X-ray scattering (WAXD/SAXS), which endows the MXene/CNF film with a significantly enhanced electrical conductivity of 46 685 S m^-1, a tensile strength of 281.7 MPa, and Young's modulus of 14.8 GPa. Furthermore, the highly aligned structure of the ultrathin film possesses a great enhancement in EMI shielding effectiveness (50.2 dB) and IR stealth (0.562 emissivity). These findings provide a fruitful understanding of the optimized fabrication in solution processing of high-performance MXene-based functional composite films and open up a great opportunity for the development of multifunctional stealth materials.

Durable antibacterial cotton fabric fabricated using a "self-created" mist polymerization device

There are two major problems associated with the use of antibacterial cotton fabric. The durability of the fabric is poor, and the inherent properties of the fabric deteriorate following the execution of the finishing processes. These limit the application of antibacterial fabric. We first treated the cotton fabric with acryloyl chloride (AC) molecules to make the surface of the fabric rich in carbon‑carbon double (C=C) bonds. Following this, the [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (DMES) monomer was polymerized with the CC bonds on the fabric following the "grafting through" method. As a result, the cotton fabric was successfully grafted with the poly[2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (PDMES), exploiting covalent bonds. The finished fabric exhibited excellent antibacterial effects. The bacterial reduction (BR) rates of the finished fabric against E. coli and S. aureus were greater than 99.0 %. Even after 50 washing cycles, the BR rates of the finished fabric against E. coli and S. aureus were greater than 96.0 %. In addition, the use of the "self-created" mist polymerization technology ensured that the inherent properties of the finished fabric were retained to a large extent. Therefore, the antibacterial cotton fabric prepared following this method can be potentially used for the fabrication of industrial and household textiles.

Advances in the Robustness of Wearable Electronic Textiles: Strategies, Stability, Washability and Perspective

Flexible electronic textiles are the future of wearable technology with a diverse application potential inspired by the Internet of Things (IoT) to improve all aspects of wearer life by replacing traditional bulky, rigid, and uncomfortable wearable electronics. The inherently prominent characteristics exhibited by textile substrates make them ideal candidates for designing user-friendly wearable electronic textiles for high-end variant applications. Textile substrates (fiber, yarn, fabric, and garment) combined with nanostructured electroactive materials provide a universal pathway for the researcher to construct advanced wearable electronics compatible with the human body and other circumstances. However, e-textiles are found to be vulnerable to physical deformation induced during repeated wash and wear. Thus, e-textiles need to be robust enough to withstand such challenges involved in designing a reliable product and require more attention for substantial advancement in stability and washability. As a step toward reliable devices, we present this comprehensive review of the state-of-the-art advances in substrate geometries, modification, fabrication, and standardized washing strategies to predict a roadmap toward sustainability. Furthermore, current challenges, opportunities, and future aspects of durable e-textiles development are envisioned to provide a conclusive pathway for researchers to conduct advanced studies.