Radiative Cooling and Solar Heating Janus Films for Personal Thermal Management

A Passive Sweat-Responsive Thermoregulatory Textile with the Largest Thermal Comfort Zone

Maintaining the human body temperature within the thermally comfortable range under volatile temperatures and environments is critical from both the perspectives of human health and energy saving. Therefore, developing thermoregulatory textiles that have a large comfort zone in response to complex environmental temperature changes has been persistently pursued. Here, we demonstrate that a passive sweat-responsive thermoregulatory (PSRT) textile, composed of a unidirectional liquid-transported polycaprolactam (PA6)/metal bilayer, can tune mid-infrared (MIR) radiation and sweat evaporation simultaneously, thus achieving a substantial expansion of the thermal comfort zone in response to dynamic conditions. Specifically, for heating mode, the metalized bilayer PSRT textile intrinsically possesses low emissivity (εMIR ∼0.233) for excellent radiative heating. As the environmental temperature increases or during heavy exercise, sweat secretion by the skin increases rapidly, which triggers the autonomous switch to the cooling mode. Sweat rapidly transports to the top PA6 layer, facilitating rapid evaporation through the unidirectional liquid transport design; meanwhile, the PSRT textile automatically switches from low emissivity to high emissivity (εMIR ∼0.955) for radiative cooling. As a result, this PSRT textile expands the thermal comfort zone by 24.7 °C (8.3-33.0 °C), setting a performance record among passive thermoregulatory textiles. It is expected that the further advancement of the passive sweat-responsive thermoregulatory textile with an increasing thermal comfort zone can not only provide comfort for the human body with a minimized carbon footprint but also significantly expand the geographic and seasonal restrictions of human activity.

Janus Textile: Advancing Wearable Technology for Autonomous Sweat Management and Beyond

To alleviate the discomfort caused by excessive sweating, there is a growing emphasis on developing wearable textiles that can evacuate sweat autonomously. These advanced fabrics, unlike their absorbent and retention-prone predecessors, harness the Janus structure-distinguished by its asymmetric wettability-to facilitate one-way transport of liquid. This unique characteristic has significant potential in addressing issues related to excessive bodily moisture and propelling the realm of smart wearables. This review offers a comprehensive overview of the advancements in Janus-structured textiles within the wearable field, delving into the mechanisms behind their unidirectional liquid transport, which rely on chemical gradient and curvature gradient strategies, alongside the methodologies for achieving asymmetric wettability. It further spotlights the multifaceted applications of Janus-based textiles in wearables, including moisture and thermal management, wound care, and sweat analysis. In addition to examining existing hurdles, the review also explores avenues for future innovation, envisioning a new era of Janus textiles tailored for personalized comfort and health monitoring capabilities.

Fundamental concepts, design rules and potentials in radiative cooling

Amidst the escalating environmental concerns driven by global warming and the detrimental impacts of extreme climates, energy consumption and greenhouse gas emissions associated with refrigeration have reached unprecedented levels. Radiative cooling, as an emerging renewable cooling technology, has been positioned as a pivotal strategy in the fight against global warming. This review examines the theoretical model of radiative cooling emitters and complex practical environment. We first investigate the thermodynamic interactions between environmental factors and the cooling surface, followed by an examination of innovative modulation techniques such as asymmetric/non-reciprocal radiative heat transfer mechanisms. Additionally, we summarize the latest advancements in structural design and simulation methodologies for radiative cooling materials at the device level. We then delve into potential applications of radiative cooling materials in various scenarios including energy-efficient construction, personal thermal management, photovoltaic cooling, and dynamic PDRC materials with seasonal adaptability. In conclusion, we provide a comprehensive overview of this technology's strengths and current challenges to inspire further research and application development in radiative cooling technology with a focus on contributing towards energy conservation objectives and promoting a sustainable society.

Humidity-Responsive Actuator-Based Smart Personal Thermal Management Fabrics Achieved by Solar Thermal Heating and Sweat-Evaporation Cooling

Personal thermal management (PTM) fabrics with energy efficiency and cost-effectiveness have been rapidly developed in recent years, but it still remains challenging to maintain a favorable body temperature through one cloth in complex and dynamic environments. Herein, we propose an asymmetric fabric for self-adaptive thermal management with the aim of enhancing thermal comfort in outdoor environments. This fabric consists of an electrospun polyamide (PA) fabric and a PPy@MXene coating layer integrated into a kirigami structure. The PPy@MXene coating, a highly efficient photothermal conversion material, imparts the fabric with a substantial temperature increase of 44 °C under one sun of irradiation. By leveraging the hygroscopic expansion property of the PA fabric, the PPy@MXene/PA fabric exhibits high sensitivity as an actuator in response to humidity. After incorporating a kirigami-inspired design, the patterned fabric efficiently harnesses solar energy under weak sunlight irradiation for heating purposes and automatically opens channels for heat release when evaporating perspiration. This dynamic fabric demonstrates superior self-adaptivity compared to conventional static fabrics, thus, presenting great insights in developing smart PTM systems.

Multifunctional Janus-Coated Metafabric for Personal Thermal Comfort and Energy Efficient Buildings

Space cooling and heating consume huge energy resources globally, while existing cooling/heating equipment can only address indoor temperature control. In this work, we report a multifunctional layered Janus-coated fabric (JCF) with radiative cooling/solar heating/Joule heating, which can utilize space and the sun as a source of cooling and heating. By adjusting the reflectivity, emissivity, and absorptivity of the coating, the fabric performs a thermal management function in a complex and changeable environment without consuming energy. In cooling mode, the cooling layer achieves a high solar reflectivity of 96% and an infrared emissivity of 96%, resulting in a 3.1 °C reduction in ambient temperature without any convective shielding. In addition, it reduces temperatures by 1.6 °C on human arms and by 5.1 °C inside houses, respectively. In the heating mode, the heating layer demonstrates excellent light-to-heat conversion efficiency under direct sunlight, achieving a 13.3 °C radiation warming ability, 16 °C heating effect on the surface of the arm, and a 12.8 °C temperature increase in the house. Furthermore, when switched to active heating for temperature regulation, JCF exhibits fast electrical response, high-efficiency electrical heat conversion capability, and stable electrical heat circulation capability. Building energy simulations indicate that widespread deployment of JCF across China could lead to a reduction in cooling and heating energy consumption by more than 25 MJ/m2 in 80% of cities. This multifunctional Janus-coated fabric not only provides a viable engineering path for the practical application of radiative heat management technology but also demonstrates its potential applications in human thermal comfort, smart wearable and building energy efficiency.

Fast-Developing Dynamic Radiative Thermal Management: Full-Scale Fundamentals, Switching Methods, Applications, and Challenges

Rapid population growth in recent decades has intensified both the global energy crisis and the challenges posed by climate change, including global warming. Currently, the increased frequency of extreme weather events and large fluctuations in ambient temperature disrupt thermal comfort and negatively impact health, driving a growing dependence on cooling and heating energy sources. Consequently, efficient thermal management has become a central focus of energy research. Traditional thermal management systems consume substantial energy, further contributing to greenhouse gas emissions. In contrast, emergent radiant thermal management technologies that rely on renewable energy have been proposed as sustainable alternatives. However, achieving year-round thermal management without additional energy input remains a formidable challenge. Recently, dynamic radiative thermal management technologies have emerged as the most promising solution, offering the potential for energy-efficient adaptation across seasonal variations. This review systematically presents recent advancements in dynamic radiative thermal management, covering fundamental principles, switching mechanisms, primary materials, and application areas. Additionally, the key challenges hindering the broader adoption of dynamic radiative thermal management technologies are discussed. By highlighting their transformative potential, this review provides insights into the design and industrial scalability of these innovations, with the ultimate aim of promoting renewable energy integration in thermal management applications.

Janus flame-retardant polyester fabric with one-way water transfer for fog collection: Influence of plasma duration, aluminum phosphate, and TiO2 nanoparticles

Significant efforts have been made to create Janus fabrics including designing their structure, employing electrospraying and electrospinning, and applying chemical and physical surface treatments to enhance the effective and directed transport of water. In this paper, a Janus industrial fabric with desirable properties such as one-way water transfer, fog collection, mechanical durability, and flame resistance was prepared. The creation of superhydrophobic surfaces on polyester fabrics involved the attachment of titanium dioxide nanoparticles (NTO) onto the fabric using aluminum phosphate (AP) adhesive and then coating with fluoroacrylate polymer (F) as a low-energy surface material. One-sided O2/Ar plasma technology was used on a superhydrophobic fabric to generate asymmetric wettability. As plasma duration rises, the depth of surface modification and oxidation intensifies. By altering the duration of plasma exposure, this fabric gained the ability to trap, transport, and collect fog. At an exposure duration of 3 min, the fabric attained one-way water transfer. The water contact angle (WCA) on the hydrophilic side was 38°, whereas the WCA on the opposing side was 120°. The fog collecting efficiency at this time was approximately 8.1 mg cm-2 min-1. FESEM and EDX confirmed the distribution and adhesion of NTO to the fabric surface with AP. AP gave the fabric great flame resistance and a limiting oxygen index (LOI) of 32.8 %. Mechanical properties were unaffected, but air permeability and the CIE whiteness index decreased.

Scalable, Flexible, and UV-Resistant Bacterial Cellulose Composite Film for Daytime Radiative Cooling

Radiative cooling, a passive cooling technology, functions by reflecting the majority of solar radiation (within the solar spectrum of 0.3-2.5 μm) and emitting thermal radiation (within the atmospheric windows of 8-13 μm and 16-20 μm). Predominantly, synthetic polymers are effectively utilized for radiative cooling while posing potential environmental hazards due to their complex components, toxicity, or nonbiodegradation. Bacterial cellulose, a natural and renewable biopolymer, stands out due to its environmentally friendly, scalability, high purity, and significant infrared emissivity. In this work, we developed a bacterial cellulose-based composite film (BCF) with a cross-linked network structure by a facile agitation spraying method to achieve enhanced and sustainable radiative cooling performance. The BCF exhibited superior optical properties and environmental tolerance, with a notable infrared emissivity of 94.6%. As a result, the thermal emitter demonstrates a substantial subambient cooling capacity (11:00 to 13:00, maximum drop of 7.15 °C, average drop of 4.85 °C; 22:00 to 2:00, maximum drop of 2.7 °C, average drop of 2.32 °C). Additionally, the BCF maintained stable emissivity after 240 h of continuous UV irradiation. Furthermore, BCF can effectively preserve the freshness of fruits under intense solar irradiation. Hence, BCF with high radiative cooling performance presents a broad application prospect in building energy conservation, solar cells efficiency enhancement, and food transportation packaging.

Revolutionizing Sports with Nanotechnology: Better Protection and Stronger Support

Modern sports activities have increasingly benefited from the development of nanotechnology, which is extensively applied in various sports events and associated activities and facilities. Nanotechnology deals with materials with nanoscale size, providing unique properties and functions compared with their bulk counterparts. Nanotechnology can not only provide better training feedback by tracking the athlete's physiological signals as well as performance details but also protect humans with nanomaterial-functionalized sports fabrics, equipment, and medicine. Nanotechnology has significantly advanced sports in various aspects, thereby leading to a rising research interest in this interdisciplinary field. This article highlights several representative nanotechnologies applied in sports such as nanomaterials in wearable sensors, personal heat management devices, functional sports fabrics, and sports medicine and discusses the principles, current challenges, as well as future opportunities.

Yarn-Based Degradable Janus PPDO Fabric for Multifunctional Applications

The growing high standard of people's wear has put forward requirements for fabrics, and multifunctional fabrics have been developed precisely in response to the requirements of the times. However, the incineration of waste fabrics produces a large amount of pollutants, resulting in a massive waste of resources and environmental pollution. Herein, the degradable nanofiber yarns (NYs) with self-cleaning properties were fabricated by in situ growth of SiO2 nanoparticles on the surface of the electrospun poly(p-dioxanone) (PPDO) NYs using the Stöber method. Then, the PPDO NYs were blended with carbon fibers and the PPDO/SiO2 NYs with themselves to form the Janus PPDO fabrics, respectively. The Janus PPDO fabric offered asymmetric wettability and dual personal thermal management properties. The PPDO/C side of the Janus PPDO fabric provided 65.8 °C at 1.5 V or 58.5 °C under one sunlight intensity for radiative heating. The PPDO/SiO2 side exhibited high solar reflectivity (81.8%) and mid-infrared (MIR) emissivity (99.1%), which reduced the skin temperature by 4.6 °C, resulting in radiative cooling. Moreover, the Janus PPDO fabrics display an excellent electromagnetic interference (EMI) shielding performance (53.3 dB). Therefore, yarn-based degradable Janus fabric has a promising future in multifunctional wearable products.

Dynamical Janus-Like Behavior Excited by Passive Cold-Heat Modulation in the Earth-Sun/Universe System: Opportunities and Challenges

The utilization of solar-thermal energy and universal cold energy has led to many innovative designs that achieve effective temperature regulation in different application scenarios. Numerous studies on passive solar heating and radiation cooling often operate independently (or actively control the conversion) and lack a cohesive framework for deep connections. This work provides a concise overview of the recent breakthroughs in solar heating and radiation cooling by employing a mechanism material in the application model. Furthermore, the utilization of dynamic Janus-like behavior serves as a novel nexus to elucidate the relationship between solar heating and radiation cooling, allowing for the analysis of dynamic conversion strategies across various applications. Additionally, special discussions are provided to address specific requirements in diverse applications, such as optimizing light transmission for clothing or window glass. Finally, the challenges and opportunities associated with the development of solar heating and radiation cooling applications are underscored, which hold immense potential for substantial carbon emission reduction and environmental preservation. This work aims to ignite interest and lay a solid foundation for researchers to conduct in-depth studies on effective and self-adaptive regulation of cooling and heating.

Wearable Aerogels for Personal Thermal Management and Smart Devices

Extreme climates have become frequent nowadays, causing increased heat stress in human daily life. Personal thermal management (PTM), a technology that controls the human body's microenvironment, has become a promising strategy to address heat stress. While effective in ordinary environments, traditional high-performance fibers, such as ultrafine, porous, highly thermally conductive, and phase change materials, fall short when dealing with harsh conditions or large temperature fluctuations. Aerogels, a third-generation superinsulation material, have garnered extensive attention among researchers for their thermal management applications in building energy conservation, transportation, and aerospace, attributed to their extremely low densities and thermal conductivity. While aerogels have historically faced challenges related to weak mechanical strength and limited secondary processing capacity, recent advancements have witnessed notable progress in the development of wearable aerogels for PTM. This progress underscores their potential applications within extremely harsh environments, serving as self-powered smart devices and sensors. This Review offers a timely overview of wearable aerogels and their PTM applications with a particular focus on their wearability and suitability. Finally, the discussion classifies five types of PTM applications based on aerogel function: thermal insulation, heating, cooling, adaptive regulation (involving thermal insulation, heating, and cooling), and utilization of aerogels as wearable smart devices.

Personal Thermal Management by Radiative Cooling and Heating

Maintaining thermal comfort within the human body is crucial for optimal health and overall well-being. By merely broadening the set-point of indoor temperatures, we could significantly slash energy usage in building heating, ventilation, and air-conditioning systems. In recent years, there has been a surge in advancements in personal thermal management (PTM), aiming to regulate heat and moisture transfer within our immediate surroundings, clothing, and skin. The advent of PTM is driven by the rapid development in nano/micro-materials and energy science and engineering. An emerging research area in PTM is personal radiative thermal management (PRTM), which demonstrates immense potential with its high radiative heat transfer efficiency and ease of regulation. However, it is less taken into account in traditional textiles, and there currently lies a gap in our knowledge and understanding of PRTM. In this review, we aim to present a thorough analysis of advanced textile materials and technologies for PRTM. Specifically, we will introduce and discuss the underlying radiation heat transfer mechanisms, fabrication methods of textiles, and various indoor/outdoor applications in light of their different regulation functionalities, including radiative cooling, radiative heating, and dual-mode thermoregulation. Furthermore, we will shine a light on the current hurdles, propose potential strategies, and delve into future technology trends for PRTM with an emphasis on functionalities and applications.

Chitosan/copper sulfide nanoparticles (CS/CuSNPs) hybrid fibers with improved mechanical and photo-thermal conversion properties via tuning CuSNPs' morphological structures

Conventional textiles are inadequate for maintaining warmth in extremely cold conditions. Therefore, the development of photo-thermal fibers for personal thermal management textiles has emerged as an urgent need. Herein, novel chitosan/copper sulfide nanoparticles (CS/CuSNPs) hybrid fibers with photo-thermal function were fabricated successfully. Significantly, our study demonstrated that the tensile and photo-thermal conversation properties of the CS/CuSNPs hybrid fibers could be effectively regulated by altering the CuSNPs` morphological structures. Compared with other CuSNPs (tube-like, sphere-like, and flower-like), the plate-like CuSNPs with smooth surfaces and uniform nanometer size played a significant role by scattering incident light in the fibers as a secondary light source for CuSNPs absorbance. Thus, under IR light irradiation at a power density of 1.0 W/cm2, the surface temperature of CS/0.1 wt% plate-like CuSNPs hybrid fibers sharply increased by 27.6 °C, which was more than 4 times of the pure CS fibers. And the breaking strength and initial modulus of CS/0.1 wt% plate-like CuSNPs hybrid fibers increased by more than 18.37 and 6.88 % compared with the nascent CS fibers. This study develops a novel and effective strategy to tune the photo-thermal and tensile properties of CS hybrid fibers without incorporating more content or additives.

Thermal and Moisture Managing E-Textiles Enabled by Janus Hierarchical Gradient Honeycombs

Moisture and thermal comfort are critical for long-term wear. In recent years, there has been rapidly growing attention on the importance of the comfortability in wearable electronic textiles (e-textiles), particularly in fields such as health monitoring, sports training, medical diagnosis and treatment, where long-term comfort is crucial. Nonetheless, simultaneously regulating thermal and moisture comfort for the human body without compromising electronic performance remains a significant challenge to date. Herein, a thermal and moisture managing e-textile (TMME-textile) that integrates unidirectional water transport and daytime radiative cooling properties with highly sensitive sensing performance is developed. The TMME-textile is made by patterning sensing electrodes on rationally designed Janus hierarchical gradient honeycombs that offer wetting gradient and optical management. The TMME-textile can unidirectionally pump excessive sweat, providing a dry and comfortable microenvironment for users. Moreover, it possesses high solar reflectivity (98.3%) and mid-infrared emissivity (89.2%), which reduce skin temperature by ≈7.0 °C under a solar intensity of 1 kW m-2 . The TMME-textile-based strain sensor displays high sensitivity (0.1749 kPa-1 ) and rapid response rate (170 ms), effectively enabling smooth long-term monitoring, especially during high-intensity outdoor sports where thermal and moisture stresses are prominent challenges to conventional e-textiles.

Advances in photothermal regulation strategies: from efficient solar heating to daytime passive cooling

Photothermal regulation concerning solar harvesting and repelling has recently attracted significant interest due to the fast-growing research focus in the areas of solar heating for evaporation, photocatalysis, motion, and electricity generation, as well as passive cooling for cooling textiles and smart buildings. The parallel development of photothermal regulation strategies through both material and system designs has further improved the overall solar utilization efficiency for heating/cooling. In this review, we will review the latest progress in photothermal regulation, including solar heating and passive cooling, and their manipulating strategies. The underlying mechanisms and criteria of highly efficient photothermal regulation in terms of optical absorption/reflection, thermal conversion, transfer, and emission properties corresponding to the extensive catalog of nanostructured materials are discussed. The rational material and structural designs with spectral selectivity for improving the photothermal regulation performance are then highlighted. We finally present the recent significant developments of applications of photothermal regulation in clean energy and environmental areas and give a brief perspective on the current challenges and future development of controlled solar energy utilization.

A smart thermal-gated bilayer membrane for temperature-adaptive radiative cooling and solar heating

Due to the huge energy consumption of traditional cooling- and heating-based electricity, passive radiative cooling and solar heating with a minimum carbon footprint using the outer space and Sun as natural thermodynamic resources have attracted much attention. However, most passive devices are static and monofunctional, and cannot meet the practical requirements of dynamic cooling and heating under various conditions. Here, we demonstrate a smart thermal-gated (STG) bilayer membrane that enables fully automatic and temperature-adaptive radiative cooling and solar heating. Specifically, this device can switch from reflective to absorptive (white to black) in the solar wavelength with the reduction in optical scattering upon ambient temperature, corresponding to a sunlight reflectivity change from 0.962 to 0.059 when the temperature drops below ∼30 °C, whereas its mid-infrared emissivity remains at ∼0.95. Consequently, this STG membrane achieves a temperature of ∼5 °C below ambient (a key signature of radiative cooling) under direct sunlight (peak solar irradiance >900 W m-2) in summer and a solar heating power of ∼550 W m-2 in winter. Theoretical analysis reveals the substantial advantage of this switchable cooling/heating device in potential energy saving compared with cooling-only and heating-only strategies when widely used in different climates. It is expected that this work will pave a new pathway for designing temperature-adaptive devices with zero energy consumption and provide an innovative way to achieve sustainable energy.

A Hierarchically Nanofibrous Self-Cleaning Textile for Efficient Personal Thermal Management in Severe Hot and Cold Environments

Climate change has recently caused more and more severe temperatures, inducing a growing demand for personal thermal management at outdoors. However, designing textiles that can achieve personal thermoregulation without energy consumption in severely hot and cold environments remains a huge challenge. Herein, a hierarchically nanofibrous (HNF) textile with improved thermal insulation and radiative thermal management functions is fabricated for efficient personal thermal management in severe temperatures. The textile consists of a radiative cooling layer, an intermediate thermal insulation layer, and a radiative heating layer, wherein the porous lignocellulose aerogel membrane (LCAM) as intermediate layer has low thermal conductivity (0.0366 W·m-1·K-1), ensuring less heat loss in cold weather and blocking external heat in hot weather. The introduction of polydimethylsiloxane (PDMS) increases the thermal emissivity (90.4%) of the radiative cooling layer in the atmospheric window and also endows it with a perfect self-cleaning performance. Solar absorptivity (80.1%) of the radiative heating layer is dramatically increased by adding only 0.05 wt% of carbon nanotubes (CNTs) into polyacrylonitrile. An outdoor test demonstrates that the HNF textile can achieve a temperature drop of 7.2 °C compared with white cotton in a hot environment and can be as high as 12.2 °C warmer than black cotton in a cold environment. In addition, the HNF textile possesses excellent moisture permeability, breathability, and directional perspiration performances, making it promising for personal thermal management in severely hot and cold environments.

Laminated MXene Foam/Cellulose@LDH Composite Membrane with Efficient EMI Shielding Property for Asymmetric Personal Thermal Management

Facing the increasingly complex and deteriorated environment, people's thermal comfort and health requirements are expanding. Therefore, wearable materials with integrated functions have progressed rapidly due to the fair compatibility for various functions and precise regulation. In this work, a laminated MXene foam/cellulose@LDH composite membrane was fabricated via a facile process consisting of in situ growth, vacuum filtration, and foaming for asymmetrical personal thermal management and electromagnetic interference shielding. In detail, the Zn-Al LDH side shows a high solar reflectance of 0.89 and an infrared emissivity of 0.97 in the atmospheric window, demonstrating the superior radiative cooling property. In contrast, the outstanding radiative warming performance is revealed by the high solar absorption (0.72) and infrared reflectivity (0.55) of the MXene foam. As a result, prominent temperature differences were achieved during the validation test. Compared to the control group, an 18 °C reduction of the Zn-Al LDH side and a 9.6 °C increment of the MXene foam side were observed, bringing out the excellent optical properties and radiative thermal management performances. What is more, due to the outstanding electrical conductivity of MXene, a rapid and prominent temperature rise to 44.2 °C could be expected by applying a low voltage of 1 V to provide active joule warmth. In addition, hydrophobization and the associated stain resistance were explained by the high water contact angles of obtained membranes. The excellent electromagnetic interference shielding performance (43.9 dB) given by the introduction of MXene provides a prospective candidate to replace the common shielding materials. The results, in general, provide a promising strategy for meeting the updating requirements for comfortable living in a world full of potential thermal and health threats.

Wearable Hydrogel-Based Epidermal Sensor with Thermal Compatibility and Long Term Stability for Smart Colorimetric Multi-Signals Monitoring

Hydrogel-based wearable epidermal sensors (HWESs) have attracted widespread attention in health monitoring, especially considering their colorimetric readout capability. However, it remains challenging for HWESs to work at extreme temperatures with long term stability due to the existence of water. Herein, a wearable transparent epidermal sensor with thermal compatibility and long term stability for smart colorimetric multi-signals monitoring is developed, based on an anti-freezing and anti-drying hydrogel with high transparency (over 90% transmittance), high stretchability (up to 1500%) and desirable adhesiveness to various kinds of substrates. The hydrogel consists of polyacrylic acid, polyacrylamide, and tannic acid-coated cellulose nanocrystals in glycerin/water binary solvents. When glycerin readily forms strong hydrogen bonds with water, the hydrogel exhibits outstanding thermal compatibility. Furthermore, the hydrogel maintains excellent adhesion, stretchability, and transparency after long term storage (45 days) or at subzero temperatures (-20 °C). For smart colorimetric multi-signals monitoring, the freestanding smart colorimetric HWESs are utilized for simultaneously monitoring the pH, T and light, where colorimetric signals can be read and stored by artificial intelligence strategies in a real time manner. In summary, the developed wearable transparent epidermal sensor holds great potential for monitoring multi-signals with visible readouts in long term health monitoring.

Bioinspired Multilayer Structures for Energy-Free Passive Heating and Thermal Regulation in Cold Environments

Passive thermal regulation has attracted increasing interest owing to its zero-energy consumption capacity, which is expected to alleviate current crises in fossil energy and global warming. In this study, a biomimetic multilayer structure (BMS) comprising a silica aerogel, a photothermal conversion material (PTCM), and a phase change material (PCM) layer is designed inspired by the physiological skin structure of polar bears for passive heating with desirable temperature and endurance. The transparent silica aerogel functions as transparent hairs and allows solar entry and prevents heat dissipation; the PTCM, a glass plate coated with black paint, acts as the black skin to convert the incident sunlight into heat; and the PCM composed of n-octadecane microcapsules stores the heat, regulating temperature and increasing endurance. Impressively, outdoor and simulated experiments indicate efficient passive heating (increment of 60 °C) of the BMS in cold environments, and endurance of 157 and 92 min is achieved compared to a single aerogel and PTCM layer, respectively. The uses of the BMS for passive heating of model houses in winter show an increase of 12.1 °C. COMSOL simulation of the BMSs in high latitudes indicates robust heating and endurance performance in a -20 °C weather. The BMS developed in this study exhibits a smart thermal regulation behavior and paves the way for passive heating in remote areas where electricity and fossil energy are unavailable in cold seasons.