Dissecting the Solid Polymer Electrolyte-Electrode Interface in the Vicinity of Electrochemical Stability Limits

Understanding the Electrochemical Window of Solid-State Electrolyte in Full Battery Application

In recent years, solid-state Li batteries (SSLBs) have emerged as a promising solution to address the safety concerns associated. However, the limited electrochemical window (ECW) of solid-state electrolytes (SEs) remains a critical constraint full battery application. Understanding the factors that influence the ECW is an essential step toward designing more robust and high-performance electrochemical systems. This review provides a detailed classification of the various "windows" of SEs and a comprehensive understanding of the associated interfacial stability of SEs in full battery application. The paper begins with a historical overview of SE development, followed by a detailed discussion of their structural characteristics. Next, examination of various methodologies used to calculate and measure the ECW is presented, culminating in the proposal of standardized testing procedures. Furthermore, a comprehensive analysis of the numerous parameters that influence the thermodynamic ECW of SEs is provided, along with a synthesis of strategies to address these challenges. At last, this review concludes with an in-depth exploration of the interfacial issues associated with SEs exhibiting narrow ECWs in full SSLBs.

An elaborative study on the influence of alkali lignin in the absence of salts on the structural, morphological and electrochemical properties of polyvinyl alcohol (PVA): A potential novel polymer matrix material for energy storage

Solid polymer electrolytes rely heavily on the properties and quality of their polymer matrix hosts as they underpin critical properties such as mechanical stability, ion transport, and overall performance. In this study, alkali lignin was incorporated into polyvinyl alcohol (PVA) to study the effect of lignin loading on the crystallinity, morphology, and electrochemical performance for a potential novel polymer matrix material in energy storage application. X-ray Diffraction (XRD) showed a reduction in the degree of crystallinity to 15.81% as lignin concentration is increased, followed by partial recrystallization at higher lignin content. Fourier Transform Infrared Spectroscopy (FTIR) confirmed strong intermolecular hydrogen bonding and π-π stacking between PVA and alkali lignin, enhancing segmental mobility and contributing to improved ionic conductivity. Field Emission Scanning Electron Microscopy (FESEM) revealed evolving porosity and rod-like structures, indicating significant morphological changes, which further supports the XRD results. Mechanical analysis reported a tensile strength of 32.84MPa, while thermogravimetric analysis (TGA) confirmed thermal stability for energy storage conditions. Electrochemical Impedance Spectroscopy (EIS) showed ionic conductivity of 3.82×10-7Scm-1 and reduced dielectric loss, and linear sweep voltammetry (LSV) reported a degradation potential of 2.26V. Cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) tests of a demonstration device with the fabricated films as the electrolyte demonstrated a specific capacitance of 1.86Fg-1 at 1mVs-1 and 1.54Fg-1 at 10mAg-1 respectively, with 92.14% retention after 1000 cycles at 50mAg-1. These observations underscore the crucial role of alkali lignin in modifying PVA's properties, making the lignin-PVA blend a robust polymer matrix host as a base for high performance solid polymer electrolyte fabrication.

Interfacial Engineering of Polymer Solid-State Lithium Battery Electrolytes and Li-Metal Anode: Current Status and Future Directions

A combination of material innovations, advanced manufacturing, battery management systems, and regulatory standards is necessary to improve the energy density and safety of lithium (Li) batteries. High-energy-density solid-state Li-batteries have the potential to revolutionize industries and technologies, making them a research priority. The combination of improved safety and compatibility with high-capacity electrode materials makes solid-stateLi-batteries with polymer solid-electrolytes an attractive option for applications where energy density and safety are critical. While polymer-based solid-state Li-batteries hold enormous promise, there are still several challenges that must be addressed, particularly regarding interface between polymer solid-electrolyte and Lianode. There are significant advancements in improving the performance of solid-state Li batteries, and researchers continue to explore new methods to address these challenges. These improvements are critical for enabling the widespread adoption of solid-state Li-batteries invariety of applications, from electrical vehicles to portable electronics. Here, common polymer solid-electrolyte and its interface challenges with Lianode are first introduced, highlighting the trend in polymer solid-state-electrolyte research toward enhancing stability, safety, and performance of solid-state Li-batteries. This includes developing novel polymer materials with improved properties, exploring advanced fabrication techniques, and integrating these electrolytes into battery designs that optimize both safety and energy density.

Phase-Transition-Promoted Interfacial Anchoring of Sulfide Solid Electrolyte Membranes for High-Performance All-Solid-State Lithium Battery

Solvent-free manufacturing is crucial for fabricating high-performance sulfide-electrolyte-based all-solid-state lithium batteries (ASSLBs), with advantages including side reaction inhibition, less contamination, and practical scalability. However, the fabricated sulfide electrolytes commonly suffer from brittleness, limited ion transport, and unsatisfactory interfacial stability due to the uncontrolled dispersion of the sulfide particles within the polymer binder matrix. Herein, a "solid-to-liquid" phase transition strategy is reported to fabricate flexible Li6PS5Cl (LPSCl) electrolytes. The polycaprolactone (PCL)-based binder (PLI) with phase-transition characteristics fills the gap of LPSCl particles and tightly grafts on the particle surface via ion-dipole interaction, bringing a thin and compact electrolyte membrane (80 µm). The simultaneously high Li-ion conducting and electron insulating nature of PLI binder facilitates Li-ion transport and ensures good interfacial stability between electrolyte and anode. Consequently, the sulfide electrolyte membrane exhibits high ionic conductivity (8.5 × 10-4 S cm-1), enabling symmetric and full cells with 10 and 2.5 times longer cycling life compared with that of the cells with pristine LPSCl electrolyte, respectively. The demonstrated strategy is versatile and can be extended to ethylene vinyl acetate copolymer (EVA) that also brings enhanced electrochemical performance. The thin sulfide electrolyte with high interfacial stability potentially facilitates dendrite-free ASSLBs with high energy density.

Initial SEI formation in LiBOB-, LiDFOB- and LiBF4-containing PEO electrolytes

A limiting factor for solid polymer electrolyte (SPE)-based Li-batteries is the functionality of the electrolyte decomposition layer that is spontaneously formed at the Li metal anode. A deeper understanding of this layer will facilitate its improvement. This study investigates three SPEs - polyethylene oxide:lithium tetrafluoroborate (PEO:LiBF4), polyethylene oxide:lithium bis(oxalate)borate (PEO:LiBOB), and polyethylene oxide:lithium difluoro(oxalato)borate (PEO:LiDFOB) - using a combination of electrochemical impedance spectroscopy (EIS), galvanostatic cycling, in situ Li deposition photoelectron spectroscopy (PES), and ab initio molecular dynamics (AIMD) simulations. Through this combination, the cell performance of PEO:LiDFOB can be connected to the initial SPE decomposition at the anode interface. It is found that PEO:LiDFOB had the highest capacity retention, which is correlated to having the least decomposition at the interface. This indicates that the lower SPE decomposition at the interface still creates a more effective decomposition layer, which is capable of preventing further electrolyte decomposition. Moreover, the PES results indicate formation of polyethylene in the SEI in cells based on PEO electrolytes. This is supported by AIMD that shows a polyethylene formation pathway through free-radical polymerization of ethylene.

SEI growth on Lithium metal anodes in solid-state batteries quantified with coulometric titration time analysis

Lithium-metal batteries with a solid electrolyte separator are promising for advanced battery applications, however, most electrolytes show parasitic side reactions at the low potential of lithium metal. Therefore, it is essential to understand how much (and how fast) charge is consumed in these parasitic reactions. In this study, a new electrochemical method is presented for the characterization of electrolyte side reactions occurring on active metal electrode surfaces. The viability of this new method is demonstrated in a so-called anode-free stainless steel ∣ Li6PS5Cl ∣ Li cell. The method also holds promise for investigating dendritic lithium growth (and dead lithium formation), as well as for analyzing various electrolytes and current collectors. The experimental setup allows easy electrode removal for post-mortem analysis, and the SEI's heterogeneous/layered microstructure is revealed through complementary analytical techniques. We expect this method to become a valuable tool in the future for solid-state lithium metal batteries and potentially other cell chemistries.