Hybrid Metal-Organic Frameworks Encapsulated Hybrid Ni-Doped CdS Nanoparticles for Visible-Light-Driven CO2 Reduction

Oxygen vacancy engineering of ultra-small CuWO4 nanoparticles for boosting photocatalytic organic pollutant degradation

Nanomaterials have attracted great interest in the field of photocatalytic degradation due to their larger specific surface area and efficient charge/mass transfer ability, which are beneficial for enhancing photocatalytic activity. However, the bandgap of photocatalysts would increase with the size reduction, weakening the photoabsorption ability. Thus the relationship between the size of catalysts and photoactivity should be balanced to achieve optimal photocatalytic performance. Herein, ultra-small CuWO4 nanoparticles (ca. 39 nm) with moderate oxygen vacancies (CuWO4-OVs) were synthesized by the cascade strategy (ligand confinement@fast calcination). The introduction of oxygen vacancies offset the deficiency of light absorption ability caused by the small size effect. Besides, oxygen vacancies could provide more reaction active sites, conducive to the adsorption and activation of dye molecules and H2O. Degradation experiments reveal that the optimized photocatalyst CuWO4-OVs 350 shows outstanding photocatalytic activity, and the removal ratio of methylene blue (MB) reaches over 90.26% in 70 min, exceeding that of pure CuWO4-air (37.66%). Additionally, the degradation performance of CuWO4-OVs 350 surpasses most of the other CuWO4-based photocatalytic systems. More importantly, the photocatalytic degradation activity of CuWO4-OVs 350 could remain at 88.26% even after five cycles, and high photostability was achieved. This work affords constructive inspiration for synergistic photoactivity enhancement and increase of catalyst reaction active sites to achieve eminent photocatalytic degradation performance.

Unveiling Advancements: Trends and Hotspots of Metal-Organic Frameworks in Photocatalytic CO2 Reduction

Metal-organic frameworks (MOFs) are robust, crystalline, and porous materials featured by their superior CO2 adsorption capacity, tunable energy band structure, and enhanced photovoltaic conversion efficiency, making them highly promising for photocatalytic CO2 reduction reaction (PCO2RR). This study presents a comprehensive examination of the advancements in MOFs-based PCO2RR field spanning the period from 2011 to 2023. Employing bibliometric analysis, the paper scrutinizes the widely adopted terminology and citation patterns, elucidating trends in publication, leading research entities, and the thematic evolution within the field. The findings highlight a period of rapid expansion and increasing interdisciplinary integration, with extensive international and institutional collaboration. A notable emphasis on significant research clusters and key terminologies identified through co-occurrence network analysis, highlighting predominant research on MOFs such as UiO, MIL, ZIF, porphyrin-based MOFs, their composites, and the hybridization with photosensitizers and molecular catalysts. Furthermore, prospective design approaches for catalysts are explored, encompassing single-atom catalysts (SACs), interfacial interaction enhancement, novel MOF constructions, biocatalysis, etc. It also delves into potential avenues for scaling these materials from the laboratory to industrial applications, underlining the primary technical challenges that need to be overcome to facilitate the broader application and development of MOFs-based PCO2RR technologies.

Guest-Induced Multilevel Charge Transport Strategy for Developing Metal-Organic Frameworks to Boost Photocatalytic CO2 Reduction

Encapsulating photogenerated charge-hopping nodes and space transport bridges within metal-organic frameworks (MOFs) is a promising method of boosting the photocatalytic performance. Herein, this work embeds electron transfer media (9,10-bis(4-pyridyl)anthracene (BPAN)) in MOF cavities to build multi-level electron transfer paths. The MOF cavities are accurately regulated to investigate the significance of the multi-level electron transfer paths in the process of CO2 photoreduction by evaluating the difference in the number of guest media. The prepared MOFs, {[Co(BPAN)(1,4-dicarboxybenzene)(H2 O)2 ]·BPAN·2H2 O} and {[Co(BPAN)2 (4,4'-biphenyldicarboxylic acid)2 (H2 O)2 ]·2BPAN·2H2 O} (denoted as BPAN-Co-1 and BPAN-Co-2), exhibit efficient visible-light-driven CO2 conversion properties. The CO photoreduction efficacy of BPAN-Co-2 (5598 µmol g-1  h-1 ) is superior to that of most reported MOF-based catalysts. In addition, the enhanced CO2 photoreduction ability is supported by density functional theory (DFT). This work illustrates the feasibility of realizing charge separation characteristics in MOF catalysts at the molecular level, and provides new insight for designing high-performance MOFs for artificial photosynthesis.

Integrating Ultrasmall Pd NPs into Core-Shell Imidazolate Frameworks for Photocatalytic Hydrogen and MeOH Production

The construction of photoactive units in the proximity of a stable framework support is one of the promising strategies for uplifting photocatalysis. In this work, the ultrasmall Pd NPs implanted onto core-shell (CS) metal organic frameworks (MOFs), i.e., CS@Pd nanoarchitectures with tailored electronic and structural properties are reported. The all-in-one heterogeneous catalyst CS@Pd3 improves the surface functionalities and exhibits an outstanding hydrogen evolution reaction (HER) activity rate of 12.7 mmol g^-1 h^-1, which is 10-folds higher than the pristine frameworks with an apparent quantum efficiency (AQE) of 9.02%. The bifunctional CS@Pd shows intriguing results when subjected to photocatalytic CO₂ reduction with an impressive rate of 71 μmol g^-1 h^-1 of MeOH under visible-light irradiation at ambient conditions. Spectroscopic data reveal efficient charge migrations and an extended lifetime of 2.4 ns, favoring efficient photocatalysis. The microscopic study affirms the formation of well-ordered CS morphology with precise decoration of Pd NPs over the CS networks. The significance of active Pd and Co sites is addressed by congruent charge-transfer kinetics and computational density functional theory calculations of CS@Pd, which validate the experimental findings with their synergistic involvement in improved photocatalytic activity. This present work provides a facile and competent avenue for the systematic construction of MOF-based CS heterostructures with active Pd NPs.

Assembling CeO2 nanoparticles on ZIF-8 via the hydrothermal method to promote the CO2 photoreduction performance

Photocatalytic reduction of CO₂ to valuable carbon fuel is a prospective technique to decrease CO₂ emissions and simultaneously generate efficient chemical energy. In this paper, a novel high-efficiency photocatalyst ZIF-8@CeO₂ heterogeneous composite (ZIF = zeolitic imidazolate framework) was prepared by the hydrothermal method, where CeO₂ nanospheres were uniformly grown on the surface of ZIF-8. Compared to pristine ZIF-8 or CeO₂ nanoparticles (NPs), the ZIF-8@CeO₂ composite shows significantly better efficiency in the reduction of CO₂ into CO and CH₄ under light irradiation, that is the CO evolution rate can reach 465.01 μmol g^-1 h^-1 and the CH₄ evolution rate can reach 181.27 μmol g^-1 h^-1. Analyses indicated that the addition of CeO₂ in the composites will expand the photoresponse region; the formation of the ZIF-8/CeO₂ heterojunction significantly promoted the separation of photogenerated electron-hole pairs within the composite. This work provided an effective method to further improve the catalytic activity of ZIF-based materials, which paved a new way for eco-friendly conversion of carbon dioxide into clean fuels and they could also have huge potential for application in energy and environmental science.

Optimization of Fe/Ni organic frameworks with core-shell structures for efficient visible-light-driven reduction of carbon dioxide to carbon monoxide

To address CO₂ emissions caused by the overuse of fossil fuels, photocatalytic CO₂ reduction from metal-organic frameworks (MOFs) to valuable chemicals is critical for energy conversion and storage. Core-shell MOFs improve interfacial interactions, increasing the number of active sites in the catalyst, thereby improving the photocatalytic reduction. In this work, the catalytic performance of Fe/Ni-MOFs toward photocatalytic CO₂ reduction was improved using a bimetallic strategy. We successfully synthesized a series of Fe/Ni-MOFs with a core-shell structure using a single-step approach combined with hydrothermal synthesis. By altering the synthesis conditions of the bimetallic organic skeleton and contrasting it with a single MOF, we successfully synthesized Fe/Ni-T120 through an efficient photocatalytic reduction of CO₂. The results of photocatalytic CO₂ reduction experiments indicated that upon using [Ru(bpy)₃]Cl₂·6H₂O as a photosensitizer and triethanolamine (TEOA) and acetonitrile (MeCN) as sacrificial agents, the CO evolution rate of Fe/Ni-T120 reached 9.74 mmol g^-1 h^-1 and the CO₂ to CO selectivity reached up to 92.1%. Additionally, Fe/Ni-T120 has a broad response range to visible light, a high photocurrent intensity, good chemical stability, and strong photocatalytic efficiency, even after repeated cycles. This study proposes a straightforward method for producing adaptable and stable MOFs for effective photocatalytic CO₂ reduction that is driven by visible light.