Highly Permeable Polylactic Acid Membrane Grafted with Quaternary Ammonium Salt for Effective and Durable Water Disinfection

Tannic acid-grafted Polylactic acid films: A nonmigrating antibacterial packaging for chilled fresh meat

Antimicrobial packaging can prolong the shelf life of fresh food, but those active antimicrobial substances may leach into the food and affect its quality. To avoid this phenome, the CC double bond was first incorporated into the chemical structure of polylactic acid (PLLA) and tannic acid (TA) to prepare poly(L-LA-co-butyrate itaconate) (PLBI) and photoactive tannic acid (pTA). Then pTA-grafted PLBI (pTA-g-PLBI) films were fabricated using UV curing technology. Results showed that pTA was successfully grafted onto the surface of PLBI film and formed a uniform layer. The pTA-g-PLBI films exhibited good bacteriostatic effects of 86 %, 90 %, and 96 % on E. coli, P. fluorescens, and S. aureus, respectively. Additionally, pTA-g-PLBI packaging reduced the relative abundance of Shewanella, Psychrobacter, and Pseudomonas in chilled pork and delayed the deterioration of pork for more than 5 days.

Application of organic silicon quaternary ammonium salt (QSA) to reduce carbon footprint of sewers: Long-term inhibition on sulfidogenesis and methanogenesis

Sulfidogenic and methanogenic processes are undesirable in sewer management, yet the derived problems regarding organic losses are often neglected. Traditional chemical dosing methods aimed at sulfide and methane control commonly involve similar mechanisms of oxidation and/or precipitation. Moreover, previous focuses were centered on elevating control efficacy rather than investigating interactions between dosed chemicals and biofilms. In this work, organic silicon quaternary ammonium salt (QSA) of 75 mg-N/L was firstly applied in laboratory pressurized sewer reactors. After three dosing events, it took 20 days for sulfidogenic activities to recover to 50 % without further elevations. Meantime, methanogenic activities were stable ca. 11 % without significant inclinations to recover. Notably, consumption rate of chemical oxygen demand (COD) was suppressed to 50 % at most, and no microbial resistance to QSA but better control efficacy was observed. Characterizations of physicochemistry, microbial community and metabolism were conducted to elucidate mechanisms. Results showed that QSA was attached on sewer biofilms via electrostatic attraction to exert enduring control efficacy. Biofilms tended to become more hydrophobic and compact after QSA exposure. Microbial analyses indicated that relative abundances of microbes regarding hydrolysis, acidogenesis and methanogenesis were sharply decreased together with down-regulation of pivotal enzymatic activities. Additionally, denitrification batch tests initially suggested that the biodegradability of effluent was significantly enhanced, which ensured the safety of QSA dosing into sewers. Overall, results of this work were expected to lay a theoretical foundation on employing QSA to wastewater management.

Evaluation of the long-term protection conferred by an organosilicon-based disinfectant formulation against bacterial contamination of surfaces

AIMS

The aim of this work was to evaluate the efficacy of an organosilicon-based, commercially available antimicrobial formulation in the My-shield® product line against bacterial surface contamination.

METHODS AND RESULTS

The antimicrobial product was tested in vitro for its long-term persistence on surfaces and effectiveness against Staphylococcus aureus biofilms in comparison to 70% ethanol and 0.1% or 0.6% sodium hypochlorite. Field testing was also conducted over 6 weeks at a university athletic facility. In vitro studies demonstrated the log reductions achieved by the test product, 70% ethanol, and 0.1% sodium hypochlorite were 3.6, 3.1, and 3.2, respectively. The test product persisted on surfaces after washing and scrubbing, and pre-treatment with this product prevented S. aureus surface colonization for up to 30 days. In comparison, pre-treatment with 70% ethanol or 0.6% sodium hypochlorite was not protective against S. aureus biofilm formation after seven days. The field test demonstrated that weekly applications of the test product were more effective at reducing surface bacterial load than daily applications of a control product.

CONCLUSIONS

The test product conferred greater long-term protection against bacterial growth and biofilm formation by S. aureus than ethanol and sodium hypochlorite. Even with less frequent applications, the test product maintained a high level of antimicrobial activity.

Preparation and Property Analysis of Antibacterial Fiber Membranes Based on Hyperbranched Polymer Quaternary Ammonium Salts

Due to their excellent properties, antimicrobial fiber membranes are widely applied in bioprotective materials. This work addresses the preparation of thermoplastic polyurethane (TPU)-based fiber membranes with active antimicrobial properties. 2-hydroxypropyl trimethyl ammonium chloride-terminated hyperbranched polymer (HBP-HTC) was synthesized and used as an antimicrobial agent. The fiber membranes were obtained by electrospinning a mixed solution of HBP-HTC and TPU. Different electrospinning conditions were investigated, such as the spinning voltage and drum rotation speed. The fiber membrane prepared under a 22 kV anode voltage and 100 rpm rotation speed had an average fiber diameter of 1.66 μm with a concentrated diameter distribution. Antibacterial tests showed that when the fiber membrane was loaded with 1500 mg/kg of HBP-HTC, the antibacterial rates of E. coli as well as S. aureus both reached 99.99%, exhibiting excellent proactive antimicrobial performance. Moreover, the protective performance of the fiber membrane was outstanding, with a filtration efficiency of 99.9%, a hydrostatic pressure resistance greater than 16,758 Pa, and a moisture permeability of 2711.0 g⋅(m2⋅d)-1.

Rapid antibiotic screening based on E. coli apoptosis using a potentiometric sensor array

Phenotypic antimicrobial susceptibility testing enables reliable antibiotic screening but requires multiple strategies to identify each phenotypic change induced by different bactericidal mechanisms. Bacteria apoptosis with typical phenotypic features has never been explored for antibiotic screening. Herein, we developed an antibiotic screening method based on the measurement of antibiotic-induced phosphatidylserine (PS) exposure of apoptotic bacteria. Phosphatidylserine externalization of E. coli that can be widely used as an apoptosis marker for antibiotics with different antibacterial mechanisms was explored. A positively charged PS-binding peptide was immobilized on magnetic beads (MBs) to recognize and capture apoptotic E. coli with PS externalization. Apoptotic E. coli binding led to the charge or charge density change of MBs-peptide, resulting in a potential change on a magneto-controlled polymeric membrane potentiometric sensor. Based on the detection of apoptotic E. coli killed by antibiotics, antibiotic screening for different classes of antibiotics and silver nanoparticles was achieved within 1.5 h using a potentiometric sensor array. This approach enables sensitive, general, and time-saving antibiotic screening, and may open up a new path for antibiotic susceptibility testing.

Fabrication of antimicrobial and high-toughness poly (lactic acid) composite films using tung oil derivatives

Tung oil derivatives are promising alternatives to traditional toxic plasticizers for improving the toughness of poly (lactic acid) (PLA) films. In this study, a tung oil-based quaternary ammonium salt (Q-ETO) was synthesized using a multi-step process involving epoxidation, ring opening, and substitution reactions. PLA based composite films with various amounts of Q-ETO were prepared by solvent casting. The impact of various amount of Q-ETO on PLA/Q-ETO composite films were evaluated with regard to their mechanical properties, hydrophilicity, water vapor permeability, optical properties, thermal stability, antibacterial properties, and leaching properties. The PLA/5%Q-ETO composite film yielded the highest elongation at break (82.52 ± 9.53 %), which was 153.67 % higher than that of pure PLA. All PLA composite films showed an antibacterial efficiency exceeding 90 % against both S. aureus and E. coli. Moreover, the PLA/Q-ETO composite film blocked the transmission of both ultraviolet and visible light while preventing the permeation of water vapor. The addition of Q-ETO only weakly affected the color and thermal stability of the PLA/Q-ETO composite film. Given the numerous advantages of the PLA composite film, it has significant potential for application as a food packaging material.

Self-Healing Hydrogels Fabricated by Introducing Antibacterial Long-Chain Alkyl Quaternary Ammonium Salt into Marine-Derived Polysaccharides for Wound Healing

The development of hydrogels as wound dressings has gained considerable attention due to their promising ability to promote wound healing. However, in many cases of clinical relevance, repeated bacterial infection, which might obstruct wound healing, usually occurs due to the lack of antibacterial properties of these hydrogels. In this study, we fabricated a new class of self-healing hydrogel with enhanced antibacterial properties based on dodecyl quaternary ammonium salt (Q12)-modified carboxymethyl chitosan (Q12-CMC), aldehyde group- modified sodium alginate (ASA), Fe3+ via Schiff bases and coordination bonds (QAF hydrogels). The dynamic Schiff bases and coordination interactions conferred excellent self-healing abilities to the hydrogels, while the incorporation of dodecyl quaternary ammonium salt gave the hydrogels superior antibacterial properties. Additionally, the hydrogels displayed ideal hemocompatibility and cytocompatibility, crucial for wound healing. Our full-thickness skin wound studies demonstrated that QAF hydrogels could result in rapid wound healing with reduced inflammatory response, increased collagen disposition and improved vascularization. We anticipate that the proposed hydrogels, possessing both antibacterial and self-healing properties, will emerge as a highly desirable material for skin wound repair.

From Antibacterial to Antibiofilm Targeting: An Emerging Paradigm Shift in the Development of Quaternary Ammonium Compounds (QACs)

In a previous development stage, mostly individual antibacterial activity was a target in the optimization of biologically active compounds and antiseptic agents. Although this targeting is still valuable, a new trend has appeared since the discovery of superhigh resistance of bacterial cells upon their aggregation into groups. Indeed, it is now well established that the great majority of pathogenic germs are found in the environment as surface-associated microbial communities called biofilms. The protective properties of biofilms and microbial resistance, even to high concentrations of biocides, cause many chronic infections in medical settings and lead to serious economic losses in various areas. A paradigm shift from individual bacterial targeting to also affecting more complex cellular frameworks is taking place and involves multiple strategies for combating biofilms with compounds that are effective at different stages of microbiome formation. Quaternary ammonium compounds (QACs) play a key role in many of these treatments and prophylactic techniques on the basis of both the use of individual antibacterial agents and combination technologies. In this review, we summarize the literature data on the effectiveness of using commercially available and newly synthesized QACs, as well as synergistic treatment techniques based on them. As an important focus, techniques for developing and applying antimicrobial coatings that prevent the formation of biofilms on various surfaces over time are discussed. The information analyzed in this review will be useful to researchers and engineers working in many fields, including the development of a new generation of applied materials; understanding biofilm surface growth; and conducting research in medical, pharmaceutical, and materials sciences. Although regular studies of antibacterial activity are still widely conducted, a promising new trend is also to evaluate antibiofilm activity in a comprehensive study in order to meet the current requirements for the development of highly needed practical applications.