Enhancing Strain-Sensing Properties of the Conductive Hydrogel by Introducing PVDF-TrFE

A Printable Deep Eutectic/Copper Conductive Colloid for Wearable Devices

The advancement of wearable electronics has placed higher demands on the comfort and convenience of flexible materials. In this work, a conductive pseudoplastic colloid was developed by utilizing the oxygen elements adsorbed on the surface of copper powder, which forms donor-acceptor interactions with the hydrogen bond donors in a deep eutectic solvent. The flakelike copper powder, serving as a conductive filler, provides more efficient spatial conductive pathways and further enhances the cross-linking ability between the copper powder and the deep eutectic solvent. The resulting deep eutectic/copper colloid not only exhibits low volume resistivity (1.19 × 10-3 (Ω·m)), high viscosity, and excellent thermal stability but also demonstrates outstanding strain-resistance characteristics. By printing onto a textile substrate, a flexible strain sensor with a wide linear strain range (5-90%) and ultrahigh sensitivity (gauge factor ≈ 1 × 105) was fabricated. This sensor can sensitively and stably detect human body movements such as joint and muscle motions. Furthermore, the sensor has been integrated into a portable glove for motion detection and human-machine interaction, showcasing its great potential as a high-performance wearable strain sensor.

Anisotropic cellulose nanofibril piezoionic organohydrogel fabricated by directional freezing for flexible strain sensors

Flexible self-powered strain sensors based on piezoionic hydrogels demonstrate great promise for wearable devices, e-skins, and health monitoring. However, existing piezoionic hydrogels typically suffer from limited piezoionic output performance, falling short of the demands of high-performance, self-powered wearable sensors. This study addresses this challenge by constructing directional ion transport channels using a cellulose nanofibril (CNF)-assisted directional freezing technique. CNF acts as nanofillers that enhance ion selectivity in the channels while improving the mechanical properties of polyvinyl alcohol (PVA)/CNF organohydrogels, enabling efficient directional ion transport with K3[Fe(CN)]6 as an ion source. The resulting organohydrogel exhibits high extensibility (479.61 %), ultimate stress (3.63 MPa), and transparency (90 %). Under a pressure of 5 N, it generates an output voltage of up to 199.45 mV within 150 ms, demonstrating a strong linear relationship between stress and output voltage in the range of 2-5 N (R2 = 0.99). After directional freezing, the output voltage and current increased by 2.49 and 1.94 times, respectively. Additionally, the selective enhancement of ion mobility by CNF has improved the piezoionic output, resulting in a 2.02-fold increase in piezoionic voltage. These high-sensitivity piezoionic organohydrogels, with their efficient electromechanical conversion capabilities, indicate a promising future for flexible strain sensors.

Recent Progress in Flexible Piezoelectric Tactile Sensors: Materials, Structures, Fabrication, and Application

Flexible tactile sensors are widely used in aerospace, medical and health monitoring, electronic skin, human-computer interaction, and other fields due to their unique advantages, thus becoming a research hotspot. The goal is to develop a flexible tactile sensor characterized by outstanding sensitivity, extensive detection range and linearity, elevated spatial resolution, and commendable adaptability. Among several strategies like capacitive, piezoresistive, and triboelectric tactile sensors, etc., we focus on piezoelectric tactile sensors because of their self-powered nature, high sensitivity, and quick response time. These sensors can respond to a wide range of dynamic mechanical stimuli and turn them into measurable electrical signals. This makes it possible to accurately detect objects, including their shapes and textures, and for them to sense touch in real time. This work encapsulates current advancements in flexible piezoelectric tactile sensors, focusing on enhanced material properties, optimized structural design, improved fabrication techniques, and broadened application domains. We outline the challenges facing piezoelectric tactile sensors to provide inspiration and guidance for their future development.

Self-healing, piezoresistive and temperature responsive behaviour of chitosan/polyacrylic acid dynamic hydrogels

Flexible electronics have introduced new challenges for efficient human-machine interactions. Hydrogels have emerged as prominent materials for electronic wearable applications due to their exceptional mechanical deformability and lightweight characteristics combined in some cases with conductive properties, and softness. Additionally, bio-interphases require multisensory response to stress, strain, temperature, and self-healing capacity. To mimic these properties, this work developed interpenetrated hydrogel networks composed of chitosan (CHI) and polyacrylic acid (PAA), combined with Fe (III) ions and varying amounts of NMBA (0-0.25 %), to achieve tailored conductivity (0.8-2.5 mS/cm), self-healing, self-standing and mechanical properties (E = 11.7-110 Pa and fracture strain = 64.9-1923 %) suitable for strain sensor applications. The results revealed a significant influence of the restrictive effect on the mobility of uncrosslinked chain segments, caused by Fe ions and NMBA, on the piezoresistance (GF 2.1-1.3) and self-healing capability of the gels. Interestingly, a transparent/turbid transition, driven by microphase separation that is characteristic of systems with high dynamic interactions, was encountered for the first time in these hydrogels. This transition was analyzed in relation to external temperature, water content, pH, and the influence of Fe ions and NMBA. The simultaneous sensitivity of these materials to temperature and pH, along with their piezoresistive and self-healing behaviour, can be highly valuable for multifunctional sensors in a wide range of applications.

Cation-π Interactions Based Conductive Hydrogels with Slide-Ring Structure Toward Super Long-Time in-air/Underwater Linear Sensing and Communication

Conductive hydrogels (CHs) are attracted more attention in the flexible wearable sensors field, however, how to stably apply CHs underwater is still a big challenge. In order to achieve the usage of CHs in aquatic environments, the integrated properties such as water retention ability, resistance to swelling, toughness, adhesiveness, linear GF sensing, and long-term usage are necessary to consider, but rarely reported in the previous reports. This paper proposes CHs prepared using cationic and aromatic monomers along with polyrotaxanes-based crosslinkers. Due to the intermolecular cation-π interactions and topological slide-ring-based polyrotaxanes, the CHs exhibit good mechanical performance, adhesive nature, and anti-swelling properties. The presence of slide-ring-based topological architecture effectively mitigates stress concentration. Additionally, the encapsulation of PA allows CHs to maintain functionality even after 240 days of direct placement at room temperature. Notably, the designed CHs exhibit linear sensitivity in detecting land/underwater human motions, and serve as Morse code signal transmitters for information transmission. Thus, the designed CHs may have broad applications in the underwater wearable sensors field.

Fabrication of anti-freezing and self-healing hydrogel sensors based on carboxymethyl guar gum and poly(ionic liquid)

As classical soft materials, conductive hydrogels have attracted wide attention in the field of strain sensors due to their unique flexibility and conductivity. However, there are still challenges in developing conductive hydrogels with comprehensive mechanical strength, self-healing ability and sensitive sensing properties. In this paper, a novel PAV/CMGG hydrogel was prepared by a simple one-pot method through the introduction of 1-vinyl-3-butylimidazolium bromide (VBIMBr), acrylic acid (AA), carboxymethyl guar gum (CMGG) and AlCl3. The coordination bond between Al3+ and -COO- groups on PAA and CMGG, the hydrogen bond between PAA and CMGG, and the electrostatic interaction between [VBIM]+ and -COO- endow the hydrogel with good mechanical properties, self-recovery ability, fatigue resistance and great self-healing properties. PAV/CMGG hydrogel had good conductivity of 2.31 S/m which could successfully light up the bulb. The hydrogel as the strain sensor had not only a wide strain sensing capability (strain ranging from 0 to 800 %), but also a high strain sensitivity (gauge factor (GF) = 28.50 for the strain ranging from 600 to 800 %). This study can provide inspiration for the construction of new high-performance flexible sensors.

Injectable Oxygen-Carrying Microsphere Hydrogel for Dynamic Regulation of Redox Microenvironment of Wounds

The delayed healing of infected wounds can be attributed to the increased production of reactive oxygen species (ROS) and consequent damages to vascellum and tissue, resulting in a hypoxic wound environment that further exacerbates inflammation. Current clinical treatments including hyperbaric oxygen therapy and antibiotic treatment fail to provide sustained oxygenation and drug-free resistance to infection. To propose a dynamic oxygen regulation strategy, this study develops a composite hydrogel with ROS-scavenging system and oxygen-releasing microspheres in the wound dressing. The hydrogel itself reduces cellular damage by removing ROS derived from immune cells. Simultaneously, the sustained release of oxygen from microspheres improves cell survival and migration in hypoxic environments, promoting angiogenesis and collagen regeneration. The combination of ROS scavenging and oxygenation enables the wound dressing to achieve drug-free anti-infection through activating immune modulation, inhibiting the secretion of pro-inflammatory cytokines interleukin-6, and promoting tissue regeneration in both acute and infected wounds of rat skins. Thus, the composite hydrogel dressing proposed in this work shows great potential for dynamic redox regulation of infected wounds and accelerates wound healing without drugs.

Flexible piezoelectric materials and strain sensors for wearable electronics and artificial intelligence applications

With the rapid development of artificial intelligence, the applications of flexible piezoelectric sensors in health monitoring and human-machine interaction have attracted increasing attention. Recent advances in flexible materials and fabrication technologies have promoted practical applications of wearable devices, enabling their assembly in various forms such as ultra-thin films, electronic skins and electronic tattoos. These piezoelectric sensors meet the requirements of high integration, miniaturization and low power consumption, while simultaneously maintaining their unique sensing performance advantages. This review provides a comprehensive overview of cutting-edge research studies on enhanced wearable piezoelectric sensors. Promising piezoelectric polymer materials are highlighted, including polyvinylidene fluoride and conductive hydrogels. Material engineering strategies for improving sensitivity, cycle life, biocompatibility, and processability are summarized and discussed focusing on filler doping, fabrication techniques optimization, and microstructure engineering. Additionally, this review presents representative application cases of smart piezoelectric sensors in health monitoring and human-machine interaction. Finally, critical challenges and promising principles concerning advanced manufacture, biological safety and function integration are discussed to shed light on future directions in the field of piezoelectrics.

Hydrophobic modification of cellulose nanofibers by gallic acid and the application in pressure sensing

Via rational molecular structure design and using gallic acid (GA) for hydrophobic modification of cellulose nanofibers (CNF), the "polymer dipole" CNF-GA with hydrophilic main chains and hydrophobic side chains was prepared, which improved the poor piezoelectric properties of CNF used for preparing pressure sensors. Due to the appearance of the side chains, the elongation at break of the CNF-GA-2, compared with CNF, was enhanced by 186 %, and the excellent tensile strength, puncture load, and tearing strength were displayed. Moreover, the significant glass transition temperature (Tg) near the human body temperature was exhibited for CNF-GA, making it possible to be applied in temperature sensing. Most importantly, the CNF-GA-2 showed the maximum hydrophobicity, with a contact angle of 76.77°. Finally, the CNF-GA-2/MXene nanocomposite film was prepared by the CNF-GA-2 with MXene through vacuum filtration. The results indicated that the film had excellent piezoelectric properties (d33 = 63.283), the generated stable induced voltage (125.6 mV), the preferable piezoresistive performance (ΔR/R0 = 2.15), the fast response/recovery time (48/61 ms), which could achieve dynamic and static responses. Moreover, this film could be used for real-time detection of limb movements (such as wrists).

Perspectives on recent advancements in energy harvesting, sensing and bio-medical applications of piezoelectric gels

The development of next-generation bioelectronics, as well as the powering of consumer and medical devices, require power sources that are soft, flexible, extensible, and even biocompatible. Traditional energy storage devices (typically, batteries and supercapacitors) are rigid, unrecyclable, offer short-lifetime, contain hazardous chemicals and possess poor biocompatibility, hindering their utilization in wearable electronics. Therefore, there is a genuine unmet need for a new generation of innovative energy-harvesting materials that are soft, flexible, bio-compatible, and bio-degradable. Piezoelectric gels or PiezoGels are a smart crystalline form of gels with polar ordered structures that belongs to the broader family of piezoelectric material, which generate electricity in response to mechanical stress or deformation. Given that PiezoGels are structurally similar to hydrogels, they offer several advantages including intrinsic chirality, crystallinity, degree of ordered structures, mechanical flexibility, biocompatibility, and biodegradability, emphasizing their potential applications ranging from power generation to bio-medical applications. Herein, we describe recent examples of new functional PiezoGel materials employed for energy harvesting, sensing, and wound dressing applications. First, this review focuses on the principles of piezoelectric generators (PEGs) and the advantages of using hydrogels as PiezoGels in energy and biomedical applications. Next, we provide a detailed discussion on the preparation, functionalization, and fabrication of PiezoGel-PEGs (P-PEGs) for the applications of energy harvesting, sensing and wound healing/dressing. Finally, this review concludes with a discussion of the current challenges and future directions of P-PEGs.

Hydroxyapatite-filled osteoinductive and piezoelectric nanofibers for bone tissue engineering

Osteoporotic-related fractures are among the leading causes of chronic disease morbidity in Europe and in the US. While a significant percentage of fractures can be repaired naturally, in delayed-union and non-union fractures surgical intervention is necessary for proper bone regeneration. Given the current lack of optimized clinical techniques to adequately address this issue, bone tissue engineering (BTE) strategies focusing on the development of scaffolds for temporarily replacing damaged bone and supporting its regeneration process have been gaining interest. The piezoelectric properties of bone, which have an important role in tissue homeostasis and regeneration, have been frequently neglected in the design of BTE scaffolds. Therefore, in this study, we developed novel hydroxyapatite (HAp)-filled osteoinductive and piezoelectric poly(vinylidene fluoride-co-tetrafluoroethylene) (PVDF-TrFE) nanofibers via electrospinning capable of replicating the tissue's fibrous extracellular matrix (ECM) composition and native piezoelectric properties. The developed PVDF-TrFE/HAp nanofibers had biomimetic collagen fibril-like diameters, as well as enhanced piezoelectric and surface properties, which translated into a better capacity to assist the mineralization process and cell proliferation. The biological cues provided by the HAp nanoparticles enhanced the osteogenic differentiation of seeded human mesenchymal stem/stromal cells (MSCs) as observed by the increased ALP activity, cell-secreted calcium deposition and osteogenic gene expression levels observed for the HAp-containing fibers. Overall, our findings describe the potential of combining PVDF-TrFE and HAp for developing electroactive and osteoinductive nanofibers capable of supporting bone tissue regeneration.

Recent Progress in Micro- and Nanotechnology-Enabled Sensors for Biomedical and Environmental Challenges

Micro- and nanotechnology-enabled sensors have made remarkable advancements in the fields of biomedicine and the environment, enabling the sensitive and selective detection and quantification of diverse analytes. In biomedicine, these sensors have facilitated disease diagnosis, drug discovery, and point-of-care devices. In environmental monitoring, they have played a crucial role in assessing air, water, and soil quality, as well as ensured food safety. Despite notable progress, numerous challenges persist. This review article addresses recent developments in micro- and nanotechnology-enabled sensors for biomedical and environmental challenges, focusing on enhancing basic sensing techniques through micro/nanotechnology. Additionally, it explores the applications of these sensors in addressing current challenges in both biomedical and environmental domains. The article concludes by emphasizing the need for further research to expand the detection capabilities of sensors/devices, enhance sensitivity and selectivity, integrate wireless communication and energy-harvesting technologies, and optimize sample preparation, material selection, and automated components for sensor design, fabrication, and characterization.

Recent Progress on Hydrogel-Based Piezoelectric Devices for Biomedical Applications

Flexible electronics have great potential in the application of wearable and implantable devices. Through suitable chemical alteration, hydrogels, which are three-dimensional polymeric networks, demonstrate amazing stretchability and flexibility. Hydrogel-based electronics have been widely used in wearable sensing devices because of their biomimetic structure, biocompatibility, and stimuli-responsive electrical properties. Recently, hydrogel-based piezoelectric devices have attracted intensive attention because of the combination of their unique piezoelectric performance and conductive hydrogel configuration. This mini review is to give a summary of this exciting topic with a new insight into the design and strategy of hydrogel-based piezoelectric devices. We first briefly review the representative synthesis methods and strategies of hydrogels. Subsequently, this review provides several promising biomedical applications, such as bio-signal sensing, energy harvesting, wound healing, and ultrasonic stimulation. In the end, we also provide a personal perspective on the future strategies and address the remaining challenges on hydrogel-based piezoelectric electronics.