Realizing High-Efficiency Yellow Emission of Organic Antimony Halides via Rational Structural Design

Tunable Dimensionality and Emission of Organic Metal Halides by Denser Stacking of Pb-Br Polyhedra

Organic metal halides (OMHs) have attracted extensive research interests due to their interesting photoluminescent properties. However, to date, most OMHs have been synthesized through the trial-and-error method, and it remains a big challenge to control the molecular-level structures through directed synthetic approaches to rationally optimize luminescence properties. In this work, we proposed a crystal structure modulation strategy to control the dimensionality and optical properties of OMHs by increasing the packing density of Pb-Br octahedra via altering the precursor stoichiometry. By precisely adjusting the ratio of 3-aminomethylpyridine to PbBr2 in the initial reactants, (C6N2H10)2PbBr6 (0D-J1) with a 0D structure, (C6N2H10)PbBr6 (2D-J2) with a 2D structure, and C3NH5PbBr (3D-J3) with a 3D structure were successfully synthesized. 0D-J1 exhibits a bright broadband yellow emission with a photoluminescence quantum yield (PLQY) of 35.40%. 2D-J2 shows a free exciton narrowband emission at room temperature and self-trapped excitons (STEs) emission at low temperatures. 3D-J3 displays a permanent defect state broad emission at room temperature. Additionally, the synthesis of compounds from the T series and P series with different dimensionalities further verifies the general applicability of this strategy. This strategy enables the directed control of the structure and optical properties of LD-OMHs while preserving the functionality of organic cations, and paves an avenue for designing and synthesizing LD-OMHs with functional coordination between organic cations and inorganic polyhedra. Together with the efficient emission and outstanding stability of 0D-J1, a high-performance white-light emitting diode (WLED) with a high color rendering index (CRI) of 92 is demonstrated.

On-Off Switching of Singlet Self-Trapped Exciton Emission Endows Antimony-Doped Indium Halides with Excitation-Wavelength-Dependent Luminescence

Excitation-wavelength-dependent (Ex-De) emitters are a fascinating category of luminescent materials whose emission properties vary with the wavelength of the light used for excitation. Antimony (Sb3+)-doped indium (In)-based metal halides are efficient light emitters; however, the peak fluorescence emission of most Sb3+-activated In-halide remains independent of the excitation wavelength. Here, the study introduces a new Sb3+-doped In-halide cluster, (BDPA)2InCl5:Sb (BDPA+ = C15H18N+, benzyldimethylphenylammonium), which demonstrates efficient Ex-De emission originating from the on-off switchable fluorescence behavior of singlet self-trapped exciton (STE) in 5-coordinate Sb3+ dopant. Interestingly, when excited within the range of 240-370 nm, photoluminescence (PL) spectra of (BDPA)2InCl5:Sb show both singlet and triplet STE emission. However, under excitation wavelengths of 370 to 420 nm, the singlet STE emission is absent, resulting in a noticeable correlated color temperature change from 1700 to 3800 K. The study provides a new approach to designing color-tunable Sb3+-based luminophores, and also presents a novel application scenario for the widely recognized Sb3+ doping strategy.

Controllable Multi-Exciton Zero-Dimensional Antimony-Based Metal Halides for White-light Emission and β-Ray Detection

Self-trapped exciton (STE) emission, typified by antimony (Sb), with broadband characteristics, represents the next generation of materials for solid-state lighting and radiation detection. However, little is known about the multiexciton behavior of the Sb emission center. Here, we proposed a general approach for designing antimony-centered multi-exciton emitting materials through self-assembly. Benefitting from controllable multiexciton behavior, dual-band white light emission spanning the entire visible spectrum was achieved. Relying on the reduction of an effective atomic number brought by self-assembly, excellent scintillation response to β-rays was attained. This study offers unprecedented insight into hybrid single/triple STE emission and unveils new avenues for single-emitter white-light emission, as well as radiographic testing using low-risk β-rays as sources.

Achieving Near-Unity Red Light Photoluminescence in Antimony Halide Crystals via Polyhedron Regulation

Exploration of efficient red emitting antimony hybrid halide with large Stokes shift and zero self-absorption is highly desirable due to its enormous potential for applications in solid light emitting, and active optical waveguides. However, it is still challenging and rarely reported. Herein, a series of (TMS)2SbCl5 (TMS=triphenylsulfonium cation) crystals have been prepared with diverse [SbCl5]2- configurations and distinctive emission color. Among them, cubic-phase (TMS)2SbCl5 shows bright red emission with a large Stokes shift of 312 nm. In contrast, monoclinic and orthorhombic (TMS)2SbCl5 crystals deliver efficient yellow and orange emission, respectively. Comprehensive structural investigations reveal that larger Stokes shift and longer-wavelength emission of cubic (TMS)2SbCl5 can be attributed to the larger lattice volume and longer Sb⋅⋅⋅Sb distance, which favor sufficient structural aberration freedom at excited states. Together with robust stability, (TMS)2SbCl5 crystal family has been applied as optical waveguide with ultralow loss coefficient of 3.67 ⋅ 10-4 dB μm-1, and shows superior performance in white-light emission and anti-counterfeiting. In short, our study provides a novel and fundamental perspective to structure-property-application relationship of antimony hybrid halides, which will contribute to future rational design of high-performance emissive metal halides.

Glass Disorder Modulated Luminescence in Zero-Dimensional Antimony-Chloride Coplanar Dimers for Optical Anti-counterfeiting

Zero-dimensional metal halides have received wide attention due to their structural diversity, strong quantum confinement, and associated excellent photoluminescence properties. A reversible and tunable luminescence would be desirable for applications such as anti-counterfeiting, information encryption, and artificial intelligence. Yet, these materials are underexplored, with little known about their luminescence tuning mechanisms. Here we report a pyramidal coplanar dimer, (TBA)Sb2Cl7 (TBA = tetrabutylammonium), showing broadband emission wavelength tuning (585-650 nm) by simple thermal treatment. We attribute the broad color change to structural disorder induced by varying the heat treatment temperatures. Increasing the heating temperature transitions the material from long-range ordered crystalline phase to highly disordered glassy phase. The latter exhibits stronger electron-phonon coupling, enhancing the self-trapped exciton emission efficiency. The work provides a new material platform for manifold optical anti-counterfeiting applications and sheds light on the emission color tuning mechanisms for further design of stimuli-responsive materials.

Embedding Te4+ into Sn4+-Based Metal Halide To Passivate Structure Defects for High-Performance Light-Emitting Application

Low-dimensional lead-halide hybrids are an emerging class of optical functional material but suffer the problems of toxicity and poor air stability. Among lead-free metal halides, tin(IV)-based metal halides are promising optoelectronic materials due to their robust structure and environmental friendliness. However, their photoluminescence (PL) properties are poor, and the underlying mechanisms are still elusive. Herein, a stable Sn4+-based halide hybrid, (C4H7N2)2SnCl6, was developed, which however exhibits poor PL properties at room temperature (RT) due to the lattice defects and the robust crystal structure. To enhance its PL efficiency, the Te4+ ion with a stereoactive 5s2 lone pair has been introduced into the lattice. As a result, Te4+-doped (C4H7N2)2SnCl6 displays broadband orange emission (∼640 nm) with a PL efficiency of ∼46% at RT. Interestingly, Te4+-doped (C4H7N2)2SnCl6 shows triple emission bands at 80 K, which could be due to the synergistic effect of the organic cations and the self-trapped state induced by Te4+. Additionally, high-performance white light-emitting diodes were prepared using Te4+-doped (C4H7N2)2SnCl6, revealing the potential of this material for lighting applications. This study provides new insight into the PL mechanism of Sn4+-based metal-halide hybrids and thus facilitates the design and development of eco-friendly light-emitting metal halides.

Realizing efficient broadband near-infrared emission and multimode photoluminescence switching via coordination structure modulation in Sb3+-doped 0D organic metal chlorides

Recently, organic Sb(III)-based metal halides have achieved significant results in the visible light region due to their efficient emission. However, realizing efficient broadband near-infrared (NIR) emission in such materials is a great challenge. Herein, we developed three different NIR emitters via a coordination structure modulation strategy in Sb3+-doped zero-dimensional organic metal chlorides of (C20H20P)2MnCl4, (C20H20P)2ZnCl4, and (C20H20P)2CdCl4 with tetrahedral structure. More specifically, after the dopant Sb3+ is inserted into the host lattice, the coordination structures of Sb3+ ions can change from [SbCl5]2- square-pyramidal configuration to [SbCl4]- clusters, which will bring a larger lattice distortion degree to the excited state compared to the ground state, resulting in a larger Stokes shift. Thus, efficient NIR emission with near-unity photoluminescence quantum yield (PLQY) can be obtained in Sb3+-doped compounds under 365 nm excitation. Moreover, Sb3+-doped NIR emitters also show remarkable stabilities, which prompts us to fabricate NIR phosphor conversion light-emitting diodes (pc-LEDs) and demonstrate their application in night vision. More interestingly, the Sb3+-doped (C20H20P)2MnCl4 shows tunable emission characteristics, which can be tuned from green to greenish-yellow, orange, red, and NIR emission under different external stimuli, and thus we can demonstrate the applications of this compound in quintuple-mode fluorescence anti-counterfeiting and information encryption.

RGB tri-luminescence in organic-inorganic zirconium halide perovskites

Materials with two or more fluorescence features under different excitation sources have great potential in optical applications, but luminous materials with three emission characteristics have been largely undeveloped. Here, we report a novel zero-dimensional (0D) organic-inorganic hybrid ((C2H5)4N)2ZrCl6 perovskite with multiple emissions. The zirconium-based perovskite exhibits a red emission around 620 nm, a green emission at 527 nm, and a blue emission around 500 nm. The red and green emissions come from self-trapped excitons (STEs) and the d-d transitions of Zr(iv), respectively, which are caused by distortion of the [ZrCl6]2- octahedra. The blue emission is caused by thermally activated delayed fluorescence (TADF), which is similar to that of Cs2ZrCl6. The absolute photoluminescence quantum yield (PLQY) of the red and blue double emission is up to 83% and the PLQY of the green emission is 27%. With different combinations of ((C2H5)4N)2ZrCl6 samples, we achieve a variety of applications, including a two-color luminescent anti-counterfeiting device, a white light-emitting diode (WLED) with a color rendering index (CRI) of 95 and information encryption with different excitations. We also synthesize other hybrid zirconium perovskites with tri-luminescence through a similar method. Our work provides a potential set of excitation-dependent luminescent materials and is expected to expand the basic research and practical applications of multi-luminescence materials.

Lead Halide Hybrids Templated by Two Coordinating Ligands for Enhanced and Stable Self-Trapped Emission

Lead halide hybrids templated by coordinating ligands are a class of ultrastable broadband self-trapped emitters that overcome the stability problems of conventional ionically bound halide hybrids. However, enhancing their photoluminescence (PL) performances by crystal engineering remains a huge challenge. Herein, for the first time, we have successfully employed the synthetic strategy of two coordinating ligands to synthesize a series of layered lead halide coordination polymers, [Pb6X10]2+(chdc2-)(2,2'-bpy)2 (X = Cl/Br, chdc = trans-1,4-cyclohexanedicarboxylate), which involves chdc as a pillaring strut and 2,2'-bpy as a chelating ligand. The introduction of a chelating ligand (2,2'-bpy) enables stronger lattice distortion of lead halide layers and enhances UV-light absorption and ligand-to-metal charge transfer (LMCT) process, thereby achieving a substantial improvement of photoluminescence quantum yields (PLQYs) over the control layered materials templated by a single chdc ligand. This class of lead halide hybrids templated by two coordinating ligands exhibit chemical "inertness" after being subjected to various chemical conditions for 48 h, maintaining stable and efficient broadband emission. Density functional theory calculations and femtosecond transient absorption spectra (fs-TA) demonstrate that the broadband emission originates from self-trapped excitons, which are more populated with the LMCT contribution from 2,2'-bpy. This study shows a rational strategy at the molecular level to modulate the photophysical properties of chemically robust lead halide coordination polymers.

Luminescent Behavior of Sb3+-Activated Luminescent Metal Halide

Metal halide perovskites have unparalleled optoelectronic properties and broad application potential and are expected to become the next epoch-making optoelectronic semiconductors. Although remarkable achievements have been achieved with lead halide perovskites, the toxicity of lead inhibits the development of such materials. Recently, Sb3+-activated luminescent metal halide perovskite materials with low toxicity, high efficiency, broadband, large Stokes shift, and emission wavelengths covering the entire visible and near-infrared regions have been considered one of the most likely luminescent materials to replace lead halide perovskites. This review reviews the synthesis, luminescence mechanism, structure, and luminescence properties of the compounds. The basic luminescence properties of Sb3+-activated luminescent metal halide perovskites and their applications in WLED, electroluminescence LED, temperature sensing, optical anti-counterfeiting, and X-ray scintillators are introduced. Finally, the development prospects and challenges of Sb3+-activated luminescent metal halide perovskites are discussed.

Dual Monomeric Inorganic Units Constructed Bright Emissive Zero-Dimensional Antimony Chlorides with Solvent-Induced Reversible Structural Transition

A5M2X11 and A3M2X9 families (A = monovalent organic cation; M = trivalent metal; X = halogen) are receiving increasing attention because of their combination of easy solution processability and superior ferroelectricity properties. However, synthesizing highly efficient A5M2X11 and A3M2X9-type fluorophores with multiple monomeric inorganic units and achieving their structural interconversion remains challenging. Here, we report two novel zero-dimensional (0D) antimony halides, (C10H16N)5Sb2Cl11·C2H3N (1) and (C10H16N)3Sb2Cl9 (2), which not only contain two distinct [SbXn]3-n units but also have excellent orange (590 nm) and yellow-green emission (540 nm) with high PLQY of 17.7% and 31.5%, respectively. Interestingly, a reversible structural conversion could be triggered by acetonitrile steam stimulation, accompanied by luminescence switching properties. This work not only enriches the structure of hybrid Sb-based halides but also provides the possibility of well-known A5M2X11 and A3M2X9 families as structural transformation materials.

Solvent-Free Grinding Synthesis of Hybrid Copper Halides for White Light Emission

Lead-free metal halides (LMHs) have recently attracted numerous attention in solid-state lighting due to their unique structures and outstanding optoelectronic properties. However, conventional preparation processes with the utilization of toxic organic solvents and high temperatures seem to impede commercial applications of LMHs. In this work, we successfully synthesize Cu⁺-based metal halides (TMA)₃Cu₂Br_5-xCl_x (TMA: tetramethylammonium) with high photoluminescence quantum yields (PLQYs) via a solvent-free mechanical grinding method. By changing the ratio of halide ions (Cl^- and Br^-) in precursors, the emission wavelength of the prepared (TMA)₃Cu₂Br_5-xCl_x can be tuned from 535 to 587 nm, which are employed as emitters in the fabrication of white-light-emitting diodes (WLEDs). The achieved WLEDs exhibit a high color rendering index value of 84 and standard Commission Internationale de l'Éclairage (CIE) coordinates of (0.324, 0.333). This feasible and solvent-free preparation strategy not only promotes the mass production of LMHs but also highlights the promising potential for efficient solid-state illumination.

Excitation-Wavelength-Dependent Emission Behavior in (NH4)2SnCl6 via Sb3+ Dopant

With high photoluminescence efficiency and a simple solution synthesis method, lead halide perovskites are expected to be a promising material for display and illumination. However, the toxicity and environmental sensitivity of lead hinder its potential applications. Here, we introduced Sb3+ ions into the lead-free perovskites derivative (NH4)2SnCl6 via a doping strategy. For the first time we synthesis the excitation-dependent perovskite with dynamically tunable fluorescence from yellow to near-infrared (NIR) emission by varying the UV excitation from 360 to 390 nm at room temperature. The DFT calculations are highly consistent no matter whether the coordination number of Sb3+ is 5 or 6. In contrasting to the early report of Sb triplet emission in the Sb doped perovskite, this material give a mixed self-trapped exciton (STE) emission. The 590 nm emission band is derived from the STE of SbCl5, and the 734 nm NIR emission band is attributed to the Sb-Sn mixed STE, which is supported by DFT calculations and spectral results. This study provides guidance for the design of perovskite phosphors with high efficiency and excitation-dependent properties.

Effect of the Host Lattice Environment on the Expression of 5s2 Lone-Pair Electrons in a 0D Bismuth-Based Metal Halide

ns²-Metal halide perovskites have attracted wide attention due to their fascinating photophysical properties. However, achieving high photoluminescence (PL) properties is still an enormous challenge, and the relationship between the lattice environment and ns²-electron expression is still elusive. Herein, an organic-inorganic Bi³⁺-based halide (C₅H₁₄N₂)₂BiCl₆·Cl·2H₂O (C₅H₁₄N₂²⁺ = doubly protonated 1-methylpiperazine) with a six-coordinated structure has been successfully prepared, which, however, exhibits inferior PL properties due to the chemically inert expression of Bi³⁺-6s² lone-pair electrons. After reasonably embedding Sb³⁺ with 5s² electrons into the lattice of (C₅H₁₄N₂)₂BiCl₆·Cl·2H₂O, the host lattice environment induces the Sb-Cl moiety to change from the original five-coordinated to six-coordinated structure, thereby resulting in a broad-band yellow emission with a PL efficiency up to 50.75%. By utilizing the host lattice of (C₅H₁₄N₂)₂BiCl₆·Cl·2H₂O, the expression of Sb³⁺-5s² lone-pair electrons is improved and thus promotes the radiative recombination from the Sb³⁺-³P₁ state, resulting in the enhanced PL efficiency. This work will provide an in-depth insight into the effect of the local structure on the expression of Sb³⁺-5s² lone-pair electrons.