Up-to-Five-Photon Upconversion from Near-Infrared to Ultraviolet Luminescence Coupled to Aluminum Plasmonic Lattices

Near-Infrared Luminescence of Cr3+-Doped Ba2NaNb5O15 Embedded in Transparent Glass-Ceramics as Solid-State Illumination for Night-Vision Imaging

Near-infrared phosphor-converted light-emitting diodes (NIR pc-LEDs), a widely used NIR light source, are typically prepared by sealing the NIR phosphor powder and an LED chip with epoxy resin. One issue that NIR pc-LEDs frequently encounter is the aging and deterioration of epoxy resin over time, which leads to self-absorption and a sharp decline in emission efficiency. Here, we report the synthesis of a chemically stable NIR luminescent material composed of Cr3+-doped Ba2NaNb5O15 nanocrystals measuring 10-15 nm, with Cr3+ ions located in the octahedral centers of the nanocrystals. Under 460 nm light excitation, the transparent glass-ceramic exhibited a broadband NIR emission in the range of 600-1400 nm, which originated from the electronic transition of Cr3+ from the excited state of 4T2 to the ground state of 4A2. The emission peak was located at ∼810 nm, the FWHM was ∼230 nm, and the internal quantum efficiency reached ∼0.81%. We constructed a stable NIR pc-LED device using optimized transparent NIR-emitting glass-ceramics and a commercially available blue LED chip, demonstrating its promising application in night-vision lighting. Our study provides a basis for the preparation of transparent glass-ceramic-based NIR pc-LED devices as an improved alternative for solid-state illumination.

Ultrabroadband Long-Wavelength Near-Infrared MgIn2O4:Ni2+ Phosphor Synthesized via Sol-gel Combustion Method as a Light Source for Night Vision Imaging, Nonvisual Detection, and Anticounterfeiting Display

Long-wavelength near-infrared (LWNIR) imaging technology has exciting application potential across various fields due to its ability of deeper penetration and unique properties related to its emission wavelength, when compared to short-wavelength near-infrared imaging. However, the limited availability of materials for LWNIR light sources, due to the lack of suitable host materials that constitute luminescence centers, has been a major challenge and technical obstacle in realizing such applications. Here, we developed MgIn2O4:Ni2+ phosphors with an antispinel structure and LWNIR luminescence properties through a sol-gel combustion method. Under excitation at 365 nm, its emission wavelength covers the range of 1000-2000 nm, with a peak emission at approximately 1520 nm, a full width at half-maximum of ∼340 nm, and an optimized photoluminescence quantum yield of ∼21.22%, when an optimal Ni2+ doping content of 1 mol % was used. Studies on the crystal structure of MgIn2O4 have shown that Ni2+ ions preferentially replace the lattice position occupied by Mg2+ ions in the [MgO6] octahedrons, which provides a crystal field microenvironment of weak strength to the Ni2+ luminescence centers and promotes their LWNIR emission with a large Stokes shift. A LWNIR pc-LED device was assembled using the optimized MgIn2O4:Ni2+ phosphor and a near-ultraviolet LED chip (@ 365 nm), and its potential applications, including NIR night vision imaging, nonvisual detection, and anticounterfeiting displays, were demonstrated. Our results show that the antispinel MgIn2O4:Ni2+ phosphor prepared by the sol-gel combustion method is a promising LWNIR luminescence material.

Strategy of Charge Compensation for High-Performance Ni2+-Activated MgAl2O4 Spinel Near-Infrared Phosphor Synthesis via the Sol-Gel Combustion Method

Near-infrared (NIR) phosphor conversion light-emitting diodes (pc-LEDs) have great application potential as NIR light sources in many fields such as food analysis, night vision illumination, and bioimaging for noninvasive medical diagnosis. In general, phosphors synthesized by a high-temperature solid-phase method have large particle sizes and have to be processed to fine powders by a grinding process, which may introduce surface defects and lower the luminous efficiency. Here, we report a sol-gel sintering method with ammonium nitrate and citric acid as the sacrificing agents to synthesize high purity, nanosized (less than 50 nm) Zr4+/Ni2+ codoped MgAl2O4 spinel NIR phosphors, in which MgAl2O4 spinel is the matrix, Ni2+ is the luminous center, and Zr4+ acts as the charge compensator. We systematically characterized the crystal structures and NIR luminescence properties of the Ni2+-doped MgAl2O4 and the Zr4+/Ni2+ codoped MgAl2O4. Under 390 nm light excitation, the emission spectrum of the Ni2+-doped MgAl2O4 phosphor covers 900-1600 nm, the half-peak width is 251 nm, and the peak position is located at 1230 nm. We demonstrated that by incorporating small amounts of Zr4+ as the charge compensator, the NIR emission intensity of the Zr4+/Ni2+ codoped MgAl2O4 nanosized phosphor was doubled over that of the Ni2+-doped MgAl2O4 phosphor. The optimal content of the charge compensator was 2 mol %. More importantly, the inclusion of Zr4+ led to a NIR phosphor with improved thermal stability in luminous properties, and the luminous intensity measured at 100 °C was 33.83% of that measured at room temperature (20 °C). This study demonstrates that NIR phosphor nanomaterials with high-purity and enhanced optical properties can be designed and synthesized through the charge compensation strategy by a sol-gel sintering method.

Enhancement of upconversion photoluminescence in phosphor nanoparticle thin films using metallic nanoantennas fabricated by colloidal lithography

Lanthanide-doped upconversion nanoparticles (UCNPs), as multifunctional light sources, are finding utility in diverse applications ranging from biotechnology to light harvesting. However, the main challenge in realizing their full potential lies in achieving bright and efficient photon upconversion (UC). In this study, we present a novel approach to fabricate an array of gold nanoantennas arranged in a hexagonal lattice using a simple and inexpensive colloidal lithography technique, and demonstrate a significant enhancement of UC photoluminescence (UCPL) by up to 35-fold through plasmon-enhanced photoexcitation and emission. To elucidate the underlying physical mechanisms responsible for the observed UCPL enhancement, we provide a comprehensive theoretical and experimental characterization, including a detailed photophysical description and numerical simulations of the spatial electric field distribution. Our results shed light on the fundamental principles governing the enhanced UCNPs and pave the way for their potential applications in photonic devices.

Enhancing Up-Conversion Luminescence Using Dielectric Metasurfaces: Role of the Quality Factor of Resonance at a Pumping Wavelength

Photonic applications of up-conversion luminescence (UCL) suffer from poor external quantum yield owing to a low absorption cross-section of UCL nanoparticles (UCNPs) doped with lanthanide ions. In this regard, plasmonic nanostructures have been proposed for enhancing UCL intensity through strong electromagnetic local-field enhancement; however, their intrinsic ohmic loss opens additional nonradiative decay channels. Herein, we demonstrate that dielectric metasurfaces can overcome this disadvantage. A periodic array of amorphous-silicon nanodisks serves as a metasurface on which a layer of UCNPs is self-assembled. Sharp resonances supported by the metasurface overlap the absorption wavelength (λ = 980 nm) of UCNPs to excite them, resulting in the enhancement of UCL intensity. We further sharpen the resonances through rapid thermal annealing (RTA) of the metasurface, crystallizing silicon to reduce intrinsic optical losses. By optimizing the RTA condition (at 1000 °C for 20 min in N2/H2 (3 vol %) atmosphere), the resonance quality factor improves from 17.2 to 32.9, accompanied by an increase in the enhancement factor of the UCL intensity from 86- to over 600-fold. Moreover, a reduction in the intrinsic optical losses mitigates the UCL thermal quenching under a high excitation density. These findings provide a strategy for increasing light-matter interactions in nanophotonic composite systems and promote UCNP applications.