Engineering the Structural Defects of Spinel Oxide Nanoneedles by Doping of V for a Highly Efficient Oxygen Evolution Reaction

In-Depth Insight into Corrosion Inhibition Performance of Sweet Potato Leaf Extract as a Green and Efficient Inhibitor for 6N01 Al Alloy in the Seawater: Experimental and Theoretical Perspectives

Corrosion protection of metal has become an important and urgent topic, which requires the development of an inexpensive, environmentally friendly, and highly efficient corrosion inhibitor. Herein, a sweet potato leaf extract (SPL) was obtained by a simple water-based extraction method and then as a green corrosion inhibitor for 6N01 Al alloy in the seawater was well investigated by the weight loss method and various electrochemical tests. Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-vis) spectroscopies were carried out to investigate the compositions of SPL. The findings from the potentiodynamic polarization (PDP) curves suggest that SPL functions as a typical mixed-type corrosion inhibitor. Notably, the maximum corrosion inhibition efficiency reaches 94.6% following a 36 h immersion period at 25 °C. The adsorption behavior of SPL on the Al alloy surface belongs to the Langmuir adsorption isotherm. The Gibbs free energy value illustrates that the adsorption of SPL contains both physisorption and chemisorption. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) indicate that SPL is firmly attached to the Al alloy surface by making a protective layer, which can effectively inhibit the corrosion of the Al alloy in the seawater. Furthermore, quantum chemical calculations were applied to validate the chemical adsorption and elucidate the relationship between the electronic structure of the active components in SPL and their effectiveness in corrosion inhibition.

Natural chitosan-based carbon dots as an eco-friendly and effective corrosion inhibitor for mild steel in HCl solution

Polysaccharide chitosan and L-histidine were applied to synthesize chitosan-based carbon dots (CA-CDs) by a simple laser ablation method. After characterization of the CA-CDs by FT-IR, UV-vis, Raman, XRD, TEM, and XPS, the CA-CDs were introduced as an eco-friendly and high-performance corrosion inhibitor for mild steel (MS) in 1.0 M HCl solution. The inhibition action and mechanism of CA-CDs were determined by weight loss and electrochemical measurements, in combination with SEM, AFM, and XPS. The results show that CA-CDs as mixed-type inhibitors could effectively weaken the corrosion of MS in 1.0 M HCl solution, and their maximum inhibition efficiency reaches 97.4 % at 40 mg L-1. The adsorption behavior of CA-CDs well obeys the Langmuir adsorption isotherm containing both chemisorption and physisorption. The chemisorption mainly results from the multiple adsorption sites in the CA-CDs, and the physical adsorption is due to the blocking and barrier effect of CA-CD nanoparticles. Both adsorption behaviors were proposed to elucidate the corrosion inhibition mechanism of CA-CDs.

One-step fabrication of vanadium-doped CoFe PBA nanosheets for efficient oxygen evolution reaction

Finding effective and affordable non-noble metal catalysts is one of the most important yet difficult tasks because of the sluggish kinetics of the oxygen evolution reaction (OER). Therefore, we synthesized vanadium-doped CoFe PBA nanosheets on nickel foam in a single step to change the electronic structure with metal doping. The sheet structure facilitates charge transfer, while vanadium doping modifies the electronic structure to enhance the catalytic activity. With just a 229 mV overpotential needed in the OER reaction to reach 10 mA cm-2, the as-synthesised electrocatalyst demonstrates high electrocatalytic activity. The produced electrocatalyst can operate at a current density of 10 mA cm-2 for 12 h, and it displays outstanding stability even at a high OER current density of 100 mA cm-2 for 12 h. This study will contribute to the development of efficient and affordable non-noble metal-based electrocatalysts.

Magnetic Field-Enhanced Oxygen Evolution Reaction via the Tuneability of Spin Polarization in a Half-Metal Catalyst

The magnetic field response of an electrochemistry process, such as the oxygen evolution reaction (OER), provides not only a strategy for enhanced catalytic activity by applying an external field but also a platform for revealing the functionality of the multiple degrees of freedom of the catalyst. However, the mechanism of the magnetic field tuneable OER is controversial. The strong correlation between the d and p orbitals of transition metal and oxygen still puzzles the dominant role of spin in an OER process. Here in this study, we have employed the manganite La_0.7Sr_0.2Ca_0.1MnO₃ as the ferromagnetic OER catalyst, which has a ferromagnetic/paramagnetic transition (T_C) around the room temperature. It is found that the overpotential can be reduced by ∼18% after applying a 5 kOe magnetic field. Furthermore, this magnetic field can trigger a further improvement of the OER performance, and it demonstrates a strong temperature dependence which is incongruent with its magnetoresistive behavior. So our experiments suggest that the observed magnetic response originates dominantly from the triplet state of the O₂, where the spin-polarized d and oxygen p orbitals lower the Gibbs free energy for every reaction step in OER. This study offers experimental evidence on comprehending the spin degree in the OER process, meanwhile benefiting the further design and engineering of the promising magnetic electrochemistry catalysts.